Download or read book Calculation and Design of Two dimensional Thermoelectric and Piezoelectric Materials written by San-Dong Guo and published by Frontiers Media SA. This book was released on 2023-08-25 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fascinating two-dimensional (2D) materials are being unconsciously applied in various fields from science to engineering, which is benefited from the glamorous physical and chemical properties of mechanics, optics, electronics, and magnetism. The representative 2D thermoelectric/piezoelectric materials can directly convert thermal/mechanical energy into electrical energy, which can resolve the energy issues and avoid further environmental deterioration. The thermoelectric or piezoelectric properties of various 2D materials, such as graphene, hexagonal boron nitride, black phosphorus, transition metal dichalcogenides (TMDs), arsenene, metal carbides and nitrides (MXenes), and so on, have been investigated in detail. Although tremendous progress has been achieved in the past few years, these properties still need to be improved for their practical application by designing new 2D materials, strain engineering, chemical functionalization, etc. In addition to this, in 2D materials, there are many other novel physical properties, such as magnetism, topology, valley, and so on. The combination of thermoelectricity/piezoelectricity with other unique properties may lead to novel device applications or scientific breakthroughs in new physics. Overall, the emergence of 2D thermoelectric and piezoelectric materials has expanded energy conversion research dramatically. By combing this new device concept with the novel 2D materials, original devices should have potential applications in energy harvesting.

Download or read book Novel Applications of Piezoelectric and Thermoelectric Materials written by Rafael Vargas-Bernal and published by BoD – Books on Demand. This book was released on 2024-01-31 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezoelectric and thermoelectric materials represent emerging cutting-edge technological materials for energy harvesting for high-value-added applications. Although these materials have been exhaustively exploited for decades, researchers around the world continue to find technological and scientific innovations that must be disseminated to the engineers of yesterday, today, and tomorrow. Piezoelectric materials, through mechanical stresses applied to them, are capable of generating electricity, while thermoelectric materials are capable of producing electricity thanks to the heat applied to them. Therefore, the direct application of these materials is in energy harvesting, which, together with the reduction of materials, leads them to portable and wearable functional applications. The purpose of this work is to disseminate some of the latest scientific and technological advances by different researchers around the world in the development of devices and applications based on these materials. The book compiles state-of-the-art fundamentals, current uses, as well as emerging applications of piezoelectric and thermoelectric materials. It is a source of inspiration for continued scientific research on the commercial, industrial, and military applications of these materials. Furthermore, it is a valuable and informative resource for undergraduate and graduate students, as well as experts and researchers in the field.

Download or read book Anisotropic 2D Materials and Devices written by Yuerui Lu and published by Royal Society of Chemistry. This book was released on 2022-09-23 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent progress in anisotropic 2D materials research, reader is introduced to phosphorene and its arsenic alloys, monochalcogenides of group IV elements in the form of MX (M = Ge, Sn and X = S, Se, Te), low-symmetry transition-metal dichalcogenide (TMD) materials such as rhenium disulphide (ReS2) and rhenium diselenide (ReSe2), and organic 2D materials. Providing detailed synthesis protocols and characterization techniques for these various anisotropic 2D materials, readers will learn their specific technological scopes for next generation electronics, optoelectronics and biomedical applications, challenges and future directions. Edited by an leading expert, contributors cover enhanced many-body interactions and high binding energy 1D particle dynamics to showcase design of high-performance optoelectronic devices; anisotropic polariton for designing polariton based laser systems; applications in bio-imaging, cancer diagnosis and therapies, drug delivery and release, and antibacterial performance; and finally, their potential in nano-electro-mechanical devices. Considering all these areas in detail, this book is a useful reference to the scientific communities working in related research fields, especially for materials scientists, chemists, physicists and electronics/electrical/energy engineers. This book may also be of use to those in chemical academia and industry more broadly.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Modeling and Optimization of Electrode Configurations for Piezoelectric Material written by Veronika Schulze and published by . This book was released on 2023* with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Englische Version: Piezoelectrics have a wide range of applications in industry, everyday life and research. This requires an accurate knowledge of the material behavior, which implies the solution of simulation-based inverse identification problems. This thesis focuses on the optimal design of experiments addressing this problem. Piezoelectric materials exhibit the property of mechanical or electrical changes in response to applied potentials or forces (direct and indirect piezoelectric effect). To apply voltage and to exploit the indirect piezoelectric effect, electrodes are attached whose configura- tion have a significant influence on possible system responses. Therefore, the potential, the number and the size of the electrodes are initially optimized in the two-dimensional case. The piezoelectric behavior in the considered small signal range is based on a time dependent linear partial differential equation system. The derivation as well as the exis- tence, uniqueness and regularity of the solutions of the equations are shown. Time- and frequency-dependent simulations based on the finite element method (FEM) with the FEM simulation tool FEniCS are performed to calculate the electric charge and the impedance, which are relevant for the material identification problem and thus for the experimental design. Drawbacks in the derivative calculations are pointed out and a first set of adjoint equations is formulated. The modeling of the optimal experimental design (OED) prob- lem is done mainly by controlling the potential of the Dirichlet boundary conditions of the boundary value problem. Several numerical examples are used to show the resulting configurations and to address the difficulties encountered. Further electrode modeling ap- proaches for example by controlling the material properties are then discussed. Finally, possible extensions of the presented OED problem are pointed out.

Download or read book Two dimensional Materials written by Pramoda Kumar Nayak and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are only a few discoveries and new technologies in materials science that have the potential to dramatically alter and revolutionize our material world. Discovery of two-dimensional (2D) materials, the thinnest form of materials to ever occur in nature, is one of them. After isolation of graphene from graphite in 2004, a whole other class of atomically thin materials, dominated by surface effects and showing completely unexpected and extraordinary properties, has been created. This book provides a comprehensive view and state-of-the-art knowledge about 2D materials such as graphene, hexagonal boron nitride (h-BN), transition metal dichalcogenides (TMD) and so on. It consists of 11 chapters contributed by a team of experts in this exciting field and provides latest synthesis techniques of 2D materials, characterization and their potential applications in energy conservation, electronics, optoelectronics and biotechnology.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Synthesis and Characterization of Two Dimensional Materials for Electronic and Thermoelectric Applications written by Victoria Li Chien Chen and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The family of two-dimensional (2D) materials has been demonstrated to possess unique characteristics that make them appealing for scaled electronic applications. However, this versatile class of materials comes with its own unique challenges for fabrication and integration into widespread adoption. Therefore, in this work, we investigate the synthesis and properties of selected 2D materials, working to understand how their unique characteristics may impact their utility. First, we develop and refine processes for large-area chemical vapor deposition (CVD) of hexagonal boron nitride (h-BN) onto carbon nanotube (CNT) and metal substrates. We report one of the first demonstrations of direct deposition of multilayer h-BN on CNTs, resulting in a thin capping layer on the CNTs without the use of a transfer process. Additionally, we elucidate some effects of substrate crystallinity on the resultant h-BN film by characterizing films deposited on both polycrystalline and single crystal Pt substrates. Finally, we demonstrate the use of monolayer h-BN as an ultra-thin protective barrier layer, protecting monolayer MoS2 from degradation at elevated temperatures, and we discuss additional applications for this material. In addition, we investigate fundamental thermoelectric properties of thin WSe2, fabricating on-chip heater and thermometer structures and quantifiably demonstrating the benefits of using a low-thermal conductivity substrate to maintain a larger temperature gradient along the channel. Using our measurement platform, we measure the highest Seebeck coefficients for thin WSe2 reported in literature to date, demonstrating its promise for temperature sensing and energy harvesting applications. We conduct measurements on multiple WSe2 samples, studying the effect of film thickness on the thermoelectric properties, and electrostatically gate the channels using an ion gel, which enables us to sweep over a wide range of electron and hole carrier densities. Finally, we explore the effects of edge contributions to narrow MoS2 and WSe2 channels, fabricating back-gated devices on exfoliated nanoribbons. The exfoliation process to deposit these nanoribbons is promising for maintaining "pristine" edges, which are ideally in the armchair or zigzag configuration. This can allow for the impact of these edges on the electronic transport properties to be studied, and we measure numerous transistors with parallel nanoribbon channels to consider these effects. We observe some trends with the maximum and minimum currents vs. the average ribbon width of these channels, and outline the next steps for this project to further understand the edge contributions. This work explores the deposition as well as fundamental electronic and thermoelectric properties of 2D materials, aiming to incrementally advance this family of materials towards viability in larger-scale applications.

Download or read book Biopolymer Composites in Electronics written by Kishor Kumar Sadasivuni and published by Elsevier. This book was released on 2016-09-10 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer Composites in Electronics examines the current state-of-the-art in the electronic application based on biopolymer composites. Covering the synthesis, dispersion of fillers, characterization and fabrication of the composite materials, the book will help materials scientists and engineers address the challenges posed by the increased use of biopolymeric materials in electronic applications. The influence of preparation techniques on the generation of micro, meso, and nanoscale fillers, and the effect of filler size and dispersion on various biopolymers are discussed in detail. Applications covered include sensors, actuators, optics, fuel cells, photovoltaics, dielectrics, electromagnetic shielding, piezoelectrics, flexible displays, and microwave absorbers. In addition, characterization techniques are discussed and compared, enabling scientists and engineers to make the correct choice of technique. This book is a 'one-stop' reference for researchers, covering the entire state-of-the-art in biopolymer electronics. Written by a collection of expert worldwide contributors from industry, academia, government, and private research institutions, it is an outstanding reference for researchers in the field of biopolymer composites for advanced technologies. - Enables researchers to keep up with the rapid development of biopolymer electronics, which offer light, flexible, and more cost-effective alternatives to conventional materials of solar cells, light-emitting diodes, and transistors - Includes thorough coverage of the physics and chemistry behind biopolymer composites, helping readers to become rapidly acquainted with the fiel - Provides in-depth information on the range of biopolymer applications in electronics, from printed flexible conductors and novel semiconductor components, to intelligent labels, large area displays, and solar panels

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1973 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Aspects of Electric Polarizability Calculations written by George Maroulis and published by IOS Press. This book was released on 2006 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers such subjects as: Ab initio and Density functional theory calculations of electric polarizability and hyperpolarizability, intermolecular forces, aromaticity, electric properties of solvated molecules, NLO materials, Raman intensities, polarizability of metal and semiconductor clusters, relativistic effects on electric properties, and more.

Download or read book Energy Sustainability in Built and Urban Environments written by Emilia Motoasca and published by Springer. This book was released on 2018-11-09 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers different aspects of energy sustainability in residential buildings and neighborhoods, starting from the construction and design aspects, and moving on to HVAC systems and lighting, and the applications, harvesting, use and storage of renewable energy. The volume focuses on smart and sustainable use of energy, discussing both the technological advancements and the economic, social and environmental impacts. Novel approaches to recycling of waste and materials in the context of residential buildings are also presented. This volume will be of interest to researchers and policy makers working in the fields of renewable energy, sustainable design and city planning.

Download or read book MXenes and their Composites written by Kishor Kumar Sadasivuni and published by Elsevier. This book was released on 2021-10-07 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: MXenes and their Composites: Synthesis, Properties and Potential Applications presents a state of the art overview of the recent developments on the synthesis, functionalization, properties and emerging applications of two-dimensional (2D) MXenes and their composites.The book systematically describes the state-of-the-art knowledge and fundamentals of MXene synthesis, structure, surface chemistry and functionalization. The book also discusses the unique electronic, optical, mechanical and topological properties of MXenes. Besides, this book covers the various emerging applications of MXenes and their composites across different fields such as energy storage and conversion, gas sensing and biosensing, rechargeable lithium and sodium-ion batteries, lithium-sulphur and multivalent batteries, electromagnetic interference shielding, hybrid capacitors and supercapacitors, hydrogen storage, catalysis and photoelectrocatalysis, gas separation and water desalination, environmental remediation and medical and biomedical applications. All these applications have been efficiently discussed in the specific chapters and in each case, the processing of MXene composites has also been discussed.This book will be an excellent reference for scientists and engineers across various disciplines and industries working in the field of highly promising 2D MXenes and their composites. The book will also act as a guide for academic researchers, material scientists, and advanced students in investigating the new applications of 2D MXenes based materials. - Covers fundamentals of technologically important MAX phases, MXene derivatives, MXene synthesis methods, intercalation and delamination strategies, surface functionalization, fundamental characteristics and properties - Demonstrates major application areas of MXenes, including catalytic, energy storage and energy generation, flexible electronics, EMI shielding, sensors and biosensors, medical and biomedical, gas separation and water desalination - Presents a detailed discussion on the processing and performance of various MXenes towards different applications

Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2D Monoelemental Materials Xenes and Related Technologies written by Zongyu Huang and published by CRC Press. This book was released on 2022-04-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.

Download or read book Thermoelectric Materials written by Enrique Macia and published by CRC Press. This book was released on 2015-05-05 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental and economic concerns have significantly spurred the search for novel, high-performance thermoelectric materials for energy conversion in small-scale power generation and refrigeration devices. This quest has been mainly fueled by the introduction of new designs and the synthesis of new materials. In fact, good thermoelectric material

Download or read book Bringing Thermoelectricity into Reality written by Patricia Aranguren and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The disproportionate use of fossil fuels has turned into a serious environmental issue. Thus, we are encountering one of the biggest challenges of the twenty-first century, satisfying the energy demand with respect to the environment. Thermoelectricity is an emerging technology, which contributes to reducing the impact of the use of traditional technologies, harvesting the waste heat, and eliminating the use of refrigerants. The book Bringing Thermoelectricity into Reality covers the current thermoelectric investigations: the study of novel thermoelectric materials, the development of computational models, the design of proper assemblies, and the optimization of thermal designs, as well as novel thermoelectric generators, coolers, and heating applications. This book looks for the definitive thermoelectric applications applied to everyday life.