Download or read book Powders and Bulk Solids written by Dietmar Schulze and published by Springer Nature. This book was released on 2021-09-02 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book concentrates on powder flow properties, their measurement and applications. These topics are explained starting from the interactions between individual particles up to the design of silos. A wide range of problems are discussed – such as flow obstructions, segregation, and vibrations. The goal is to provide a deeper understanding of the powder flow, and to show practical solutions.
Download or read book Bulk Solids Handling written by C.R. Woodcock and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding ofthe properties and the handling characteristics of liquids and gases has long been regarded as an essential requirement for most practising engineers. It is therefore not surprising that, over the years, there has been a regular appearance of books dealing with the fundamentals of fluid mechanics, fluid flow, hydraulics and related topics. What is surprising is that there has been no parallel development of the related discipline of Bulk Solids Handling, despite its increasing importance in modern industry across the world. It is only very recently that a structured approach to the teaching, and learning, of the subject has begun to evolve. A reason for the slow emergence of Bulk Solids Handling as an accepted topic of study in academic courses on mechanical, agricultural, chemical, mining and civil engineering is perhaps that the practice is so often taken for granted. Certainly the variety of materials being handled in bulk is almost endless, ranging in size from fine dust to rocks, in value from refuse to gold, and in temperature from deep-frozen peas to near-molten metal.
Download or read book Handling of Bulk Solids written by P. A. Shamlou and published by Elsevier. This book was released on 2013-10-22 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-materials handling and processing along with their prevention. Worked-out examples are included at the end of each chapter to familiarize the reader with the numerical manipulations and orders of magnitude of various parameters which occur in the subject of bulk solids handling. Because of the complicated form of most of the design equations involved, the computer is an ideal vehicle for the solution of many design problems in bulk solids handling. This book is suitable for advanced undergraduate and postgraduate levels as well as for practitioners in industry.
Download or read book Bulk Solids Handling written by Don McGlinchey and published by Wiley-Blackwell. This book was released on 2008-04-28 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Bulk Solids Handling: Equipment Selection and Operation provides an overview of the major technologies involved in the storage and handling of particulate materials from large grains to fine cohesive materials. - Topics covered include characterisation of individual particles and bulk particulate materials, silo design for strength and flow, pneumatic conveying systems, mechanical conveying, and small scale operations. - Guidance is given on appropriate equipment choices depending on the type of material to be handled, and applications and limitations of current bulk solids handling equipment are discussed."--Jacket.
Download or read book Bulk Solids Handling written by C.R. Woodcock and published by Springer Science & Business Media. This book was released on 1988-08-31 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding ofthe properties and the handling characteristics of liquids and gases has long been regarded as an essential requirement for most practising engineers. It is therefore not surprising that, over the years, there has been a regular appearance of books dealing with the fundamentals of fluid mechanics, fluid flow, hydraulics and related topics. What is surprising is that there has been no parallel development of the related discipline of Bulk Solids Handling, despite its increasing importance in modern industry across the world. It is only very recently that a structured approach to the teaching, and learning, of the subject has begun to evolve. A reason for the slow emergence of Bulk Solids Handling as an accepted topic of study in academic courses on mechanical, agricultural, chemical, mining and civil engineering is perhaps that the practice is so often taken for granted. Certainly the variety of materials being handled in bulk is almost endless, ranging in size from fine dust to rocks, in value from refuse to gold, and in temperature from deep-frozen peas to near-molten metal.
Download or read book Simulations in Bulk Solids Handling written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2023-04-24 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulations in Bulk Solids Handling Valuable resource for engineers and professionals dealing with bulk granular or powdered materials across industries using Discrete Element Methods (DEM) In many traditional university engineering programmes, no matter whether undergraduate or postgraduate, the behavior of granular materials is not covered in depth or at all. This omission leaves recent engineering graduates with little formal education in the major industrial area of bulk solids handling. This book teaches young professionals and engineers to find appropriate solutions for handling granular and powdered materials. It also provides valuable information for experienced engineers to gain an understanding and appreciation of the most significant simulation methods–DEM chief amongst them. For any student or professional involved with bulk solids handling, this book is a key resource to understand the most efficient and effective stimulation methods that are available today. Its comprehensive overview of the topic allows for upcoming professionals to ensure they have adequate knowledge in the field and for experienced professionals to improve their skills and processes.
Download or read book Powder and Bulk Solids Handling Processes written by Koichi Iinoya and published by CRC Press. This book was released on 1988-07-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some key points in the instrumentation of powder handling processes and provides readers with sufficient knowledge of instrumentation to act as a base for the development of new instruments. It is helpful for instrumentation engineers in powder and bulk solid processes.
Download or read book Unit Operations of Particulate Solids written by Enrique Ortega-Rivas and published by CRC Press. This book was released on 2016-04-19 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for practicing engineers and engineers in training, this book covers the most important operations involving particulate solids. Through clear explanations of theoretical principles and practical laboratory exercises, the text provides an understanding of the behavior of powders and pulverized systems. It also helps readers develop skills for operating, optimizing, and innovating particle processing technologies and machinery in order to carry out industrial operations. The author explores common bulk solids processing operations, including milling, agglomeration, fluidization, mixing, and solid-fluid separation.
Download or read book Solid State Properties written by Mildred Dresselhaus and published by Springer. This book was released on 2018-01-17 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a gap between many of the basic solid state physics and materials sciencebooks that are currently available. It is written for a mixed audience of electricalengineering and applied physics students who have some knowledge of elementaryundergraduate quantum mechanics and statistical mechanics. This book, based on asuccessful course taught at MIT, is divided pedagogically into three parts: (I) ElectronicStructure, (II) Transport Properties, and (III) Optical Properties. Each topic is explainedin the context of bulk materials and then extended to low-dimensional materials whereapplicable. Problem sets review the content of each chapter to help students to understandthe material described in each of the chapters more deeply and to prepare them to masterthe next chapters.
Download or read book Guidelines for Safe Handling of Powders and Bulk Solids written by Stanley S. Grossel and published by Wiley-AIChE. This book was released on 2005 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.
Download or read book Structures and Granular Solids written by Jian-Fei Chen and published by CRC Press. This book was released on 2008-06-23 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features 29 invited papers presented at the Royal Society of Edinburgh on 1-2 July 2008 by colleagues, collaborators, students and friends of Professor J. Michael Rotter (FREng, FRSE, FICE, FASCE, FIStructE, FIEAust) in honour of his 60th birthday.The articles published in this volume will be of great value to readers as it contains con
Download or read book Grain Handling and Storage written by G. Boumans and published by Elsevier. This book was released on 2012-12-02 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, for the first time, is a single source of ordered, coherent information about the handling and storage of grain, grain derivatives and substitutes. The author has had a lifetime's experience in this field and the book is the culmination of six years spent compiling the valuable technical information gained from his extensive know-how. The book surveys various techniques and practical engineering options for the study, design, construction, safety, operation and maintenance of grain handling and storage facilities. An extensive bibliography permits direct access to the primary literature and the text is supplemented throughout by numerous illustrations, line drawings and photographs.With its complete and comprehensive coverage and systematic layout, the book provides a wealth of information on the basic technology and the latest developments in this field. It will be welcomed by a wide readership, including general managers, plant and engineers, manufacturers, insurance companies and all technicians and professionals involved in the daily operation, maintenance and safety of such facilities.
Download or read book Handbook of Conveying and Handling of Particulate Solids written by A. Levy and published by Elsevier. This book was released on 2001-10-22 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents comprehensive coverage of the technology for conveying and handling particulate solids. Each chapter covers a different topic and contains both fundamentals and applications. Usually, each chapter, or a topic within a chapter, starts with one of the review papers. Chapter 1 covers the characterization of the particulate materials. Chapter 2 covers the behaviour of particulate materials during storage, and presents recent developments in storage and feeders design and performance. Chapter 3 presents fundamental studies of particulate flow, while Chapters 4 and 5 present transport solutions, and the pitfalls of pneumatic, slurry, and capsule conveying. Chapters 6, 7 and 8 cover both the fundamentals and development of processes for particulate solids, starting from fluidisation and drying, segregation and mixing, and size-reduction and enlargement. Chapter 9 presents environmental aspects and the classification of the particulate materials after they have been handled by one of the above-mentioned processes. Finally, Chapter 10 covers applications and developments of measurement techniques that are the heart of the analysis of any conveying or handling system.
Download or read book Bulk Materials Handling Handbook written by Jacob Fruchtbaum and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handling of bulk materials is a continuously completed projects. Much of the nomenclature has been changing science. Since very few schools teach the han brought up to date. dling of bulk materials, it is necessary for practicing en Publication of the material contained herein is not in gineers to develop their own training manuals. This book tended as a representation or warranty on the part of the is an abbreviated version of a manual used for that pur author, publisher, editors, or any other person or firm pose in our office, and developed over a period of more named herein that it is suitable for any particular use, or than 50 years. While some industrial firms follow their free from infringement of any patent or patents. own practices, the trend in the past few years has been The text is intended as a guide. When used for any to adopt the standards of equipment manufacturers' as specific project, a competent professional engineer sociations and similar organizations. The selection of should be retained to verify the assumptions, applica material and the use of drawiugs instead of photographs bility, calculations, and accuracy of the particular de is based on our experience. sign.
Download or read book Fluidization Solids Handling and Processing written by Wen-Ching Yang and published by Elsevier. This book was released on 1998-12-31 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, Fluidization, Solids Handling, and Processing, is the first of a series of volumes on "Particle Technology". Particles are important products of chemical process industries spanning the basic and specialty chemicals, agricultural products, pharmaceuticals, paints, dyestuffs and pigments, cement, ceramics, and electronic materials. Solids handling and processing technologies are thus essential to the operation and competitiveness of these industries. Fluidization technology is employed not only in chemical production, it also is applied in coal gasification and combustion for power generation, mineral processing, food processing, soil washing and other related waste treatment, environmental remediation, and resource recovery processes. The FCC (Fluid Catalytic Cracking) technology commonly employed in the modern petroleum refineries is also based on fluidization principles.
Download or read book Particle Technology and Engineering written by Jonathan P.K. Seville and published by Butterworth-Heinemann. This book was released on 2016-05-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Technology and Engineering presents the basic knowledge and fundamental concepts that are needed by engineers dealing with particles and powders. The book provides a comprehensive reference and introduction to the topic, ranging from single particle characterization to bulk powder properties, from particle-particle interaction to particle-fluid interaction, from fundamental mechanics to advanced computational mechanics for particle and powder systems. The content focuses on fundamental concepts, mechanistic analysis and computational approaches. The first six chapters present basic information on properties of single particles and powder systems and their characterisation (covering the fundamental characteristics of bulk solids (powders) and building an understanding of density, surface area, porosity, and flow), as well as particle-fluid interactions, gas-solid and liquid-solid systems, with applications in fluidization and pneumatic conveying. The last four chapters have an emphasis on the mechanics of particle and powder systems, including the mechanical behaviour of powder systems during storage and flow, contact mechanics of particles, discrete element methods for modelling particle systems, and finite element methods for analysing powder systems. This thorough guide is beneficial to undergraduates in chemical and other types of engineering, to chemical and process engineers in industry, and early stage researchers. It also provides a reference to experienced researchers on mathematical and mechanistic analysis of particulate systems, and on advanced computational methods. Provides a simple introduction to core topics in particle technology: characterisation of particles and powders: interaction between particles, gases and liquids; and some useful examples of gas-solid and liquid-solid systems Introduces the principles and applications of two useful computational approaches: discrete element modelling and finite element modelling Enables engineers to build their knowledge and skills and to enhance their mechanistic understanding of particulate systems
Download or read book Solids Level Measurement and Detection Handbook written by Joe Lewis and published by Momentum Press. This book was released on 2012-02-21 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive reference on state-of-the art controls and systems for measuring and monitoring bulk solid materials. "Solids Level Measurement and Detection Handbook" features: * Definitions of standard terms and overview of typical problems and solutions in automated bulk materials handling * In-depth coverage of Point Level Detection Technology and Instrumentation * In-depth coverage of Continuous Level Technology and Instrumentation * Explains how automated solids materials can be integrated into inventory management Storing, handling, and processing of bulk solid materials is fundamental to nearly every manufacturing and processing industry, from the food industry and agribusiness, to the plastics industry, to the mining and cement industries, to coal-fired electric utilities. Automating the handling and processing of solids is rapidly growing, but heretofore little has been published on the latest in sensors and controls used in such applications. This book is intended to meet that need, with full coverage, from principles of measuring solid bulk materials to controlling their flow and movement to help with choosing the right equipment for specific applications. Nowhere else in the current literature will industrial engineers, controls engineers, and manufacturing technicians find a better resource on current sensor controls and systems used to automate the handling and process of bulk solid materials.
