Download or read book Expansion Joints in Buildings written by National Research Council and published by National Academies Press. This book was released on 1974-02-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.

Download or read book Building Movements and Joints written by and published by . This book was released on 1982 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Anatomy and Physiology written by J. Gordon Betts and published by . This book was released on 2013-04-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cracks Movements and Joints in Buildings written by National Research Council Canada. Division of Building Research and published by . This book was released on 1976 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Anatomy Physiology written by Lindsay Biga and published by . This book was released on 2019-09-26 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A version of the OpenStax text

Download or read book Architectural Graphic Standards for Residential Construction written by American Institute of Architects and published by John Wiley & Sons. This book was released on 2010-04-26 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The residential construction market may have its ups and downs, but the need to keep your construction knowledge current never lets up. Now, with the latest edition of Architectural Graphic Standards for Residential Construction, you can keep your practice at the ready. This edition was expertly redesigned to include all-new material on current technology specific to residential projects for anyone designing, constructing, or modifying a residence. With additional, new content covering sustainable and green designs, sample residential drawings, residential construction code requirements, and contemporary issues in residential construction, it’s a must-have resource. And now it's easier to get the information you need when you need it with references to the relevant building codes built right into the details and illustrations. These new "smart" details go beyond dimensions with references to the International Residential Building Code—presenting all the information you need right at your fingertips. New features and highlights include: Loads of previously unpublished content—over 80% is either new or entirely revised Sustainable/ green design information in every chapter—a must today's practicing building and construction professionals Coverage of contemporary issues in residential construction—aging in place, new urbanism, vacation and small homes, historic residences…it’s all here. Coverage of single- and multi-family dwellings—complete coverage of houses, row homes and quadraplexes as dictated by the International Residential Building Codes.

Download or read book Fundamentals of Building Construction written by Edward Allen and published by John Wiley & Sons. This book was released on 2011-10-24 with total page 1674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Fifth Edition, this essential textbook has been used by thousands of students annually in schools of architecture, engineering, and construction technology. The bestselling reference focuses on the basic materials and methods used in building construction, emphasizing common construction systems such as light wood frames, masonry bearing walls, steel frames, and reinforced concrete. New introductory material on the processes, organization, constraints, and choices in construction offers a better look at the management of construction. New sections covering the building envelope uncover the secrets to designing enclosures for thermal insulation, vapor retarders, air barriers, and moisture control. The Fifth Edition also features more axonometric detail drawings and revised photographs for a thoroughly illustrated approach and the latest IBC 2006, CSI MasterFormat, ASTM references, and LEED information.

Download or read book Science and Technology of Building Seals Sealants Glazing and Waterproofing written by Charles J. Parise and published by ASTM International. This book was released on 1992 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Durability of Building Sealants written by RILEM Technical Committee 139-DBS, Durability of Building Sealants and published by RILEM Publications. This book was released on 1999 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Construction of Joints in Concrete Structures written by M. N. Bussell and published by Thomas Telford. This book was released on 1995 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides advice on provision, specification and construction of joints in in-situ concrete construction. It aims to help structural designers make informed decisions about the provision of joints in concrete structures.

Download or read book Barry s Advanced Construction of Buildings written by Stephen Emmitt and published by John Wiley & Sons. This book was released on 2018-08-31 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated edition of the authoritative and comprehensive guide to construction practice The revised fourth edition of Barry's Advanced Construction of Buildings expands on the resource that has become a standard text on the construction of buildings. The fourth edition covers the construction of larger-scale buildings (primarily residential, commercial and industrial) constructed with load bearing frames in timber, concrete and steel; supported by chapters on offsite construction, piling, envelopes to framed buildings, fit-out and second fix, lifts and escalators, building pathology, upgrading and demolition. The author covers the functional and performance requirements of the main building elements as well as building efficiency and information on meeting the challenges of limiting the environmental impact of buildings. Each chapter includes new "at a glance" summaries that introduce the basic material giving a good understanding of the main points quickly and easily. The text is fully up to date with the latest building regulations and construction technology. This important resource: Covers design, technology, offsite construction, site assembly and environmental issues of larger-scale buildings including primarily residential, commercial and industrial buildings constructed with load bearing frames Highlights the concept of building efficiency, with better integration of the topics throughout the text Offers new "at a glance" summaries at the beginning of each chapter Is a companion to Barry's Introduction to Construction of Buildings, fourth edition Written for undergraduate students and those working towards similar NQF level 5 and 6 qualifications in building and construction, Barry's Advanced Construction of Buildings is a practical and highly illustrated guide to construction practice. It covers the materials and technologies involved in constructing larger scale buildings.

Download or read book Concrete and Masonry Movements written by Jeffrey Brooks and published by Butterworth-Heinemann. This book was released on 2014-08-23 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely used in the construction of bridges, dams and pavements, concrete and masonry are two of the world’s most utilized construction materials. However, many engineers lack a proper understanding of the methods for predicting and mitigating their movements within a structure. Concrete and Masonry Movements provides practical methods for predicting and preventing movement in concrete and masonry, saving time and money in retrofitting and repair cost. With this book in hand, engineers will discover new prediction models for masonry such as: irreversible moisture expansion of clay bricks, elasticity, creep and shrinkage. In addition, the book provides up-to-date information on the codes of practice. Provides mathematical modelling tools for predicting movement in masonry Up-to-date knowledge of codes of practice methods Clearly explains the factors influencing all types of concrete and masonry movement Fully worked out examples and set problems are included at the end of each chapter

Download or read book An Introduction to Building Joint Sealing for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2023-09-27 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and construction managers interested in joints for building construction. Here is what is discussed: 1. TERMS, 2. JOINT MOVEMENT, 3. BUTT AND SHEAR JOINTS, 4. WIDTH TO DEPTH RATIO, 5. TEMPERATURE, 6. APPROXIMATE JOINT DIMENSIONS, 7. CALCULATION OF JOINT SIZE, 8. MATERIALS, 9. ELASTOMERIC SEALANTS., 10. STRUCTURAL SILICONE SEALANTS, 11. PREFORMED SEALANTS, 12. WOOL FELT, 13. RESILIENT FOAM, 14. ACOUSTIC SEALANTS, 15. BUTYL SEALANTS, 16. CHLOROSULFONATED POLYETHYLENE (CSPE) AND POLYCHLOROPRENE SEALANTS, 17. CURING, 18. SELECTION OF SEALANTS, 19. RADON, 20. FIRE RESISTANCE, 21. JOINT DETAILS.

Download or read book Science and Technology of Building Seals Sealants Glazing and Waterproofing written by Michael A. Lacasse and published by ASTM International. This book was released on 1996 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Sealants written by Thomas F. O'Connor and published by ASTM International. This book was released on 1990 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concerned with sealants for buildings (not with constructing sealant material). The 24 papers from a symposium in Fort Lauderdale, Florida, January to February 1990, address such major concerns of the industry as the identification and quantification of the effects of movement on sealants, laborator

Download or read book The Natural Building Companion written by Jacob Deva Racusin and published by Chelsea Green Publishing. This book was released on 2012-05-01 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural buildings not only bring satisfaction to their makers and joy to their occupants, they also leave the gentlest footprint on the environment. In this complete reference to natural building philosophy, design, and technique, Jacob Deva Racusin and Ace McArleton walk builders through planning and construction, offering step-by-step instructions on: siting and site analysis choosing materials integrating basic structural considerations into a design strategies for heating/cooling efficiency and moisture management planning for acoustics developing an integrative design navigating budgeting, code compliance, and project management creating the foundation, wall system, roof, and floors selecting and making plasters and paints evaluating options for mechanical and utility systems protecting against fire and insects integrating structures within landscape, climate, and human communities ...and more Applicable to building in climates that are cold and wet, hot and dry, or somewhere in-between, The Natural Building Companion provides the tools necessary to understand basic principles of building science, including structural and thermal engineering, and hydrodynamics. This guide offers thorough, up-to-date, and advanced installation details and performance characteristics of straw-bale, straw-clay, woodchip-clay, and cellulose wall systems, as well as earthen and stone wall systems and a variety of framing, roofing, flooring, mechanical system, and finishing options. This fully-illustrated volume informs professionals making the transition from conventional building, homeowners embarking on their own construction, or green builders who want comprehensive guidance on natural-building options. A State-of-the-Art Resource for Natural Builders The Natural Building Companion is a part of The Yestermorrow Design/Build Library and includes an instructional DVD.

Download or read book Movements in Buildings written by D. Lenczner and published by Elsevier. This book was released on 2014-06-28 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been extensively revised and expanded to include an additional chapter on dynamic movements in buildings, and new material concerning movements in buildings caused by shrinkage and swelling due to seasonal changes in the soil moisture content. The chief causes for movements in buildings: elastic deformations, creep, temperature changes, moisture movements, dynamic loads, consolidation and mining subsidence are examined in detail and useful examples with solutions are included. Whilst essentially a text for undergraduate students of civil and structural engineering building technology and architecture, this clear and concise introduction will also be of interest to the practising engineer. In SI units