Download or read book Advances in Building Construction Technology written by Mohammad Arif Kamal and published by . This book was released on 2021-04-20 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building construction technology is concerned with the technical performance of buildings, building materials, and building construction systems. Technological progress has introduced many innovations in the field of construction industry. The building construction technology covers a wide range of modern techniques and practices that encompass the latest developments in materials technology and their applications, design procedures, quantity surveying, structural analysis and design, the functioning of components and systems, procedures and details of building assembly; operating strategies and so on. The adoption of advanced construction technology requires an appropriate design, commitment from the whole project team, suitable procurement strategies, good quality control, appropriate training and careful commissioning. There is a difference between new and old traditional construction methods. The use of machinery and automation has made its way through the civil engineering and construction industry. Most of the building components such as columns, roofs and concrete blocks are available as prefabricated forms that increase the speed of construction process greatly. In the rapidly changing scenario of building sector, architects, engineers and builders should search for new construction technologies to adopt in future constructions that benefits like energy efficiency, resources and water conservation, improved indoor air quality, life cycle cost reduction, durability and low maintenance. Therefore, to attain these objectives, application and knowledge of latest advancements in various technologies are of prime concern. This book 'Advances in Building Construction Technology' contains six chapters which introduces various scientific methods and state-of-the-art building constriction technologies and systems that may be beneficial to architects, engineers, building scientists and construction industry professionals.
Download or read book Building Construction and Technology written by Vijayalaxmi J. and published by Springer Nature. This book was released on 2023-07-24 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights various aspects of building construction industry based on data from field studies. It discusses the challenges, methodologies, technological applications in building construction, technology, and management. The book presents new approaches to effective building construction and an understanding of the impact of applications of latest technologies. This book is aimed at researchers and professionals in civil engineering and building engineering management to assist in understanding the domain along with recent applications, the advantages, and practical limitations through real-life case studies. This book is useful for building engineers in understanding the effective use of technology, construction methods, and project delivery systems.
Download or read book Sustainable Construction Technologies written by Vivian Y. Tam and published by Butterworth-Heinemann. This book was released on 2019-01-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Construction Technologies: Life-Cycle Assessment provides practitioners with a tool to help them select technologies that are financially advantageous even though they have a higher initial cost. Chapters provide an overview of LCA and how it can be used in conjunction with other indicators to manage construction. Topics covered include indoor environment quality, energy efficiency, transport, water reuse, materials, land use and ecology, and more. The book presents a valuable tool for construction professionals and researchers that want to apply sustainable construction techniques to their projects. Practitioners will find the international case studies and discussions of worldwide regulation and standards particularly useful. Provides a framework for analyzing sustainable construction technologies and economic viability Introduces key credit criteria for different sustainable construction technologies Covers the most relevant construction areas Includes technologies that can be employed during the process of construction, or to the product of the construction process, i.e. buildings Analyzes international rating systems and provides supporting case studies
Download or read book Construction Technology 2 Industrial and Commercial Building written by Mike Riley and published by Bloomsbury Publishing. This book was released on 2018-02-20 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed in a structured, directed format to help develop understanding, rather than just providing a simple source of information, this popular undergraduate textbook offers comprehensive coverage of industrial and commercial building technology. It builds on material in the first volume in the series Construction Technology 1: House Construction but it is also valuable as a standalone text. The most student-friendly textbook in the area, it uses a wealth of features to reinforce understanding and test knowledge, including case studies and comparative studies. Case studies include photographs and commentary on specific aspects of the technology of framed buildings, while comparative studies allow the reader to make a critical evaluation, comparing and contrasting design details and solutions. This textbook is aimed at undergraduates in Construction Management, Quantity Surveying and Building Surveying, and HNC/D students in the same areas. It is also ideal for associated Built Environment courses e.g. Land Management, Civil Engineering, where the basic technologies need to be understood. New to this Edition: - Thoroughly revised throughout - New material on sustainable construction incorporated as a key theme in each aspect of technology - A new chapter on building services installations - A new section of the highly topical subject of Building Information Modelling (BIM)
Download or read book Building Construction Illustrated written by Francis D. K. Ching and published by John Wiley & Sons. This book was released on 2011-03-10 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic visual guide to the basics of building construction, now with the most current information For nearly three decades, Building Construction Illustrated has offered an outstanding introduction to the principles of building construction. This new edition of the revered classic remains as relevant as ever-providing the latest information in Francis D.K. Ching's signature style. Its rich and comprehensive approach clearly presents all of the basic concepts underlying building construction and equips readers with useful guidelines for approaching virtually any new materials or techniques they may encounter. Laying out the material and structural choices available, it provides a full under-standing of how these choices affect a building's form and dimensions. Complete with more than 1,000 illustrations, the book moves through each of the key stages of the design process, from site selection to building components, mechanical systems, and finishes. Illustrated throughout with clear and accurate drawings that present the state of the art in construction processes and materials Updated and revised to include the latest knowledge on sustainability, incorporation of building systems, and use of new materials Archetypal drawings offer clear inspiration for designers and drafters Reflects the most current building codes and CSI Master Format numbering scheme With its comprehensive and lucid presentation of everything from foundations and floor systems to finish work, Building Construction Illustrated, Fourth Edition equips students and professionals in all areas of architecture and construction with useful guidelines for approaching virtually any new materials or techniques they may encounter in building planning, design, and construction.
Download or read book Robot Oriented Design written by Thomas Bock and published by Cambridge University Press. This book was released on 2015-05-05 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cambridge Handbooks on Construction Robotics series focuses on the implementation of automation and robot technology to renew the construction industry and to arrest its declining productivity. The series is intended to give professionals, researchers, lecturers, and students basic conceptual and technical skills and implementation strategies to manage, research, or teach the implementation of advanced automation and robot-technology-based processes and technologies in construction. Currently, the implementation of modern developments in product structures (modularity and design for manufacturing), organizational strategies (just in time, just in sequence, and pulling production), and informational aspects (computer-aided design/manufacturing or computer-integrated manufacturing) are lagging because of the lack of modern integrated machine technology in construction. The Cambridge Handbooks on Construction Robotics books discuss progress in robot systems theory and demonstrate their integration using real systematic applications and projections for off-site as well as on-site building production. Robot-Oriented Design and Management introduces the design, innovation, and management methodologies that are key to the realization and implementation of the advanced concepts and technologies presented in the subsequent volumes. This book describes the efficient deployment of advanced construction and building technology. It is concerned with the coadaptation of construction products, processes, organization, and management, and with automated/robotic technology, so that the implementation of modern technology becomes easier and more efficient. It is also concerned with technology and innovation management methodologies and the generation of life cycle-oriented views related to the use of advanced technologies in construction.
Download or read book Building Construction written by Denis Walton and published by . This book was released on 1995 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text has been designed to assist students who are studying building construction and technology as part of their technical education. It has been specially prepared to match the typical syllabuses found in senior secondary schools and colleges where technical and vocational studies form part of the curriculum.
Download or read book Building Construction Handbook written by Roy Chudley and published by Routledge. This book was released on 2016-04-14 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal for students on all construction courses Topics presented concisely in plain language and with clear drawings Updated to include revisions to Building and Construction regulations The Building Construction Handbook is THE authoritative reference for all construction students and professionals. Its detailed drawings clearly illustrate the construction of building elements, and have been an invaluable guide for builders since 1988. The principles and processes of construction are explained with the concepts of design included where appropriate. Extensive coverage of building construction practice, techniques, and regulations representing both traditional procedures and modern developments are included to provide the most comprehensive and easy to understand guide to building construction. This new edition has been updated to reflect recent changes to the building regulations, as well as new material on the latest technologies used in domestic construction. Building Construction Handbook is the essential, easy-to-use resource for undergraduate and vocational students on a wide range of courses including NVQ and BTEC National, through to Higher National Certificate and Diploma, to Foundation and three-year Degree level. It is also a useful practical reference for building designers, contractors and others engaged in the construction industry.
Download or read book Fundamentals of Building Construction written by Edward Allen and published by . This book was released on 1990 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the art of building, it has been revised and updated to reflect changes in the industry. Describes the materials used since ancient times—wood, stone, brick and the techniques by which they are made into buildings today—before proceeding to structural steel, reinforced and prestressed concrete, float glass, extruded aluminum, advanced gypsum products, synthetic rubber compounds and plastics. Deals with whole systems of building including foundations, framing, roofing, interiors, electrical and mechanical systems. Each chapter contains a summary, list of key terms and concepts, review questions and references. Illustrated with over 300 line drawings and 700 photographs.
Download or read book Advances and Technologies in Building Construction and Structural Analysis written by Alireza Kaboli and published by BoD – Books on Demand. This book was released on 2021-12-22 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Edited Volume “Advances and Technologies in Building Construction and Structural Analysis” is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of advances and technologies in building construction and structural analysis. The book comprises single chapters authored by various researchers and edited by an expert active in the alternative medicine research area. All chapters are complete in themselves but united under a common research study topic. This publication aims at providing a thorough overview of the latest research efforts by international authors on advances and technologies in building construction and structural analysis and opening new possible research paths for further novel developments.
Download or read book Construction Technology for Tall Buildings written by M. Y. L. Chew and published by World Scientific. This book was released on 2001 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study describes current construction practices and processes for tall buildings from foundation to roof. It discusses the construction sequence of the various proprietary systems and their merits and disadvantages.
Download or read book Ancient Building Technology Volume 3 Construction 2 vols written by G.R.H. Wright and published by BRILL. This book was released on 2009-11-23 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building construction is the subject of this third part of the Ancient Building Technology set (TCH 4 and TCH 7 dealing with the history of building and building materials). Beginning with the formulation of a project (drawings, specifications and estimates of quantities) it goes on to discuss preliminary site surveying and setting out, followed by building site development and its attendant installations, and then examines the disposition of the various building materials (wood, stone, brick, and concrete) in building construction from pre-history to the end of antiquity. The work is intended as a ready reference compendium of information which otherwise would require extended research to come by. It should be of service to all students of antiquity, and a particular convenience to have on hand during archaeological field work. This volume is published in two parts, the first containing the discussion and the second more than 400 illustrations, completing the discussion.
Download or read book Building Construction Estimating written by Stephen D. Schuette and published by McGraw-Hill Companies. This book was released on 1994 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Construction Estimating furnishes readers with specific details on how a general building contractor derives the cost of a project before it begins, and how the estimate fits into the total construction process. The book provides coverage of such areas as determining labor productivity and wages, selecting equipment and assigning productivity rates and costs, acquiring specialty contractor prices, and assigning overhead costs and profit. The material is presented from the point of view of a general contractor working on a competitively bid stipulated-sum (lump-sum) contract. However, other contract methods and the effects they have on the estimating process are also discussed. Furthermore, the principles of estimating for the specialty trades are discussed from the reference of a general building contractor, and how the subcontractor's bid will affect the total project cost is presented. Of special note is the book's introduction and utilization of computers in the estimating process - enabling readers to utilize new technology in an effective and efficient manner. The book is organized in a way that first teaches the reader to perform many of the estimating activities manually, then guides them in developing a computer spreadsheet. The use of spreadsheets empowers the reader to go beyond the manual calculations and develop new and more proficient solutions to estimating problems.
Download or read book Building Construction written by Madan Mehta and published by Prentice Hall. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science of building construction and design is evolving more quickly than ever before. The second edition of this outstanding text builds on the previous version. It incorporates the latest updates available, features hundreds of new pieces of artwork, and is now in FULL COLOR! Written by an author team with decades of experience in architecture, building construction, engineering, and teaching, Building Construction: Principles, Materials & Systems 2nd Edition is a comprehensive and fully illustrated introduction to construction methods and materials. Continuing on with the books unique organization, Principles of Construction are covered in Part One and Materials and Systems of Construction are covered in Part Two. Emphasizing a visual approach to learning, it includes more than 1,400 original illustrations and an extra large trim size (9" x 12") that provides an open and inviting layout that readers are sure to appreciate. Plus! A completely revamped and expanded companion website, "MyConstructionKit", is also available!
Download or read book Chudley and Greeno s Building Construction Handbook written by Roy Chudley and published by Taylor & Francis. This book was released on 2024-05-31 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 13th edition of Chudley and Greeno’s Building Construction Handbook remains THE authoritative reference for all construction students and professionals. The principles and processes of construction are explained with the concepts of design included where appropriate. Extensive coverage of building construction practice, techniques and regulations representing both traditional procedures and modern developments are included to provide the most comprehensive and easy-to-understand guide to building construction. This new edition has been updated to reflect recent changes to the Building Regulations, as well as including new material on modern methods of construction, greater emphasis on sustainability, health and safety, and coverage of heat pumps, photovoltaics, underfloor heating and rainwater harvesting. Chudley and Greeno’s Building Construction Handbook is the essential, easy-to-use resource for undergraduate and vocational students on a wide range of courses including NVQ and BTEC National, through to Higher National Certificate and Diploma, to Foundation and three-year degree level. It is also a useful practical reference for building designers, contractors and others engaged in the construction industry.
Download or read book Construction Methods And Technology Penerbit USM written by Hanizzam Awang and published by Penerbit USM. This book was released on 2015 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the most up-to-date and common construction methods and technologies for different types of buildings, alongside the key construction materials and properties needed to carry them out. The book offers comprehensive coverage of the necessary topics for students, engineers, contractors and other professionals in the field of construction. It presents the topics in a logical, well-structured format that follows the natural sequence of a construction project. It also emphasizes in providing the most innovative information available in site investigation and planning, safety, Industrialised Building System (IBS), construction materials, and so forth. This book provides general and specific information for all types of building construction, therefore, can be a reference book for all practitioners in the industry. Relevant building codes, particularly Malaysian Codes, are frequently referenced, rounding out this need-to-know coverage that is critical to success in the industry. Keywords: Universiti Sains Malaysia, Penerbit Universiti Sains Malayia, Penerbit USM
Download or read book Construction and Building Research written by Carmen Llinares-Millán and published by Springer Science & Business Media. This book was released on 2014-01-31 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many areas of knowledge converge in the building industry and therefore research in this field necessarily involves an interdisciplinary approach. Effective research requires strong relation between a broad variety of scientific and technological domains and more conventional construction or craft processes, while also considering advanced management processes, where all the main actors permanently interact. This publication takes an interdisciplinary approach grouping various studies on the building industry chosen from among the works presented for the 2nd International Conference on Construction and Building Research. The papers examine aspects of materials and building systems; construction technology; energy and sustainability; construction management; heritage, refurbishment and conservation. The information contained within these pages may be of interest to researchers and practitioners in construction and building activities from the academic sphere, as well as public and private sectors.
