Download or read book Build a Solar Hydrogen Fuel Cell System written by Phillip Hurley and published by . This book was released on 2004 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to construct and operate the components of a solar hydrogen fuel cell system: the fuel cell stack, the electrolyzer to generate hydrogen fuel, simple hydrogen storage, and solar panels designed specifically to run electrolyzers for hydrogen production. Complete, clear, illustrated instructions to build all the major components make it easy for the non-engineer to understand and work with this important new technology.--from publisher description

Download or read book Solar Hydrogen Production written by Francesco Calise and published by Academic Press. This book was released on 2019-08-15 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Hydrogen Production: Processes, Systems and Technologies presents the most recent developments in solar-driven hydrogen generation methods. The book covers different hydrogen production routes, from renewable sources, to solar harvesting technologies. Sections focus on solar energy, presenting the main thermal and electrical technologies suitable for possible integration into solar-based hydrogen production systems and present a thorough examination of solar hydrogen technologies, ranging from solar-driven water electrolysis and solar thermal methods, to photo-catalytic and biological processes. All hydrogen-based technologies are covered, including data regarding the state-of-the art of each process in terms of costs, efficiency, measured parameters, experimental analyses, and demonstration projects. In the last part of the book, the role of hydrogen in the integration of renewable sources in electric grids, transportation sector, and end-user applications is assessed, considering their current status and future perspectives. The book includes performance data, tables, models and references to available standards. It is thus a key-resource for engineering researchers and scientists, in both academic and industrial contexts, involved in designing, planning and developing solar hydrogen systems. - Offers a comprehensive overview of conventional and advanced solar hydrogen technologies, including simulation models, cost figures, R&D projects, demonstration projects, test standards, and safety and handling issues - Encompasses, in a single volume, information on solar energy and hydrogen systems - Includes detailed economic data on each technology for feasibility assessment of different systems

Download or read book Assessment of Hydrogen Energy for Sustainable Development written by John W. Sheffield and published by Springer. This book was released on 2009-03-16 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuel prices continue to rise and, at the same time, environmental policies are demanding a reduction in greenhouse gases and toxic emissions. A coherent energy strategy is needed: one that addresses both energy supply and demand and takes into account the whole energy lifecycle, from fuel production to the end-users of energy systems. This book examines hydrogen energy technologies and infrastructure development.

Download or read book The Hype About Hydrogen written by Joseph J. Romm and published by Island Press. This book was released on 2013-04-10 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lately it has become a matter of conventional wisdom that hydrogen will solve many of our energy and environmental problems. Nearly everyone -- environmentalists, mainstream media commentators, industry analysts, General Motors, and even President Bush -- seems to expect emission-free hydrogen fuel cells to ride to the rescue in a matter of years, or at most a decade or two. Not so fast, says Joseph Romm. In The Hype about Hydrogen, he explains why hydrogen isn't the quick technological fix it's cracked up to be, and why cheering for fuel cells to sweep the market is not a viable strategy for combating climate change. Buildings and factories powered by fuel cells may indeed become common after 2010, Joseph Romm argues, but when it comes to transportation, the biggest source of greenhouse-gas emissions, hydrogen is unlikely to have a significant impact before 2050. The Hype about Hydrogen offers a hype-free explanation of hydrogen and fuel cell technologies, takes a hard look at the practical difficulties of transitioning to a hydrogen economy, and reveals why, given increasingly strong evidence of the gravity of climate change, neither government policy nor business investment should be based on the belief that hydrogen cars will have meaningful commercial success in the near or medium term. Romm, who helped run the federal government's program on hydrogen and fuel cells during the Clinton administration, provides a provocative primer on the politics, business, and technology of hydrogen and climate protection.

Download or read book The Hydrogen Economy written by National Academy of Engineering and published by National Academies Press. This book was released on 2004-09-05 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The announcement of a hydrogen fuel initiative in the President's 2003 State of the Union speech substantially increased interest in the potential for hydrogen to play a major role in the nation's long-term energy future. Prior to that event, DOE asked the National Research Council to examine key technical issues about the hydrogen economy to assist in the development of its hydrogen R&D program. Included in the assessment were the current state of technology; future cost estimates; CO2 emissions; distribution, storage, and end use considerations; and the DOE RD&D program. The report provides an assessment of hydrogen as a fuel in the nation's future energy economy and describes a number of important challenges that must be overcome if it is to make a major energy contribution. Topics covered include the hydrogen end-use technologies, transportation, hydrogen production technologies, and transition issues for hydrogen in vehicles.

Download or read book Solar II written by Phillip Hurley and published by . This book was released on 2012 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrates how to build, set up and configure a variety of photovoltaic system components. It is a presentation of basic concepts of design for small solar electric power systems, and an introduction to the tools and components needed. -- from preface.

Download or read book Poor Man Hydrogen Generator on Demand written by Stephen A. Michael and published by AuthorHouse. This book was released on 2011-03-08 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am

Download or read book Hydrogen and Fuel Cell written by Johannes Töpler and published by Springer. This book was released on 2015-12-20 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to hydrogen as an essential energy carrier for use with renewable sources of primary energy. It provides an overview of the state of the art, while also highlighting the developmental and market potential of hydrogen in the context of energy technologies; mobile, stationary and portable applications; uninterruptible power supplies and in the chemical industry. Written by experienced practitioners, the book addresses the needs of engineers, chemists and business managers, as well as graduate students and researchers.

Download or read book Hydrogen and Fuel Cells written by International Energy Agency and published by Simon and Schuster. This book was released on 2004 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen and fuel cells are vital technologies to ensure a secure and CO2-free energy future. Their development will take decades of extensive public and private effort to achieve technology breakthroughs and commercial maturity. Government research programs are indispensable for catalyzing the development process. This report maps the IEA countries' current efforts to research, develop and deploy the interlocking elements that constitute a "hydrogen economy", including CO2 capture and storage when hydrogen is produced out of fossil fuels. It provides an overview of what is being done, and by whom, covering an extensive complexity of national government R & D programs. The survey highlights the potential for exploiting the benefits of the international cooperation. This book draws primarily upon information contributed by IEA governments. In virtually all the IEA countries, important R & D and policy efforts on hydrogen and fuel cells are in place and expanding. Some are fully-integrated, government-funded programs, some are a key element in an overall strategy spread among multiple public and private efforts. The large amount of information provided in this publication reflects the vast array of technologies and logistics required to build the "hydrogen economy."--Publisher description.

Download or read book Hydrogen and Fuel Cells written by Bent Sørensen and published by Academic Press. This book was released on 2011-11-14 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hydrogen economy, in which this one gas provides the source of all energy needs, is often touted as the long-term solution to the environmental and security problems associated with fossil fuels. However, before hydrogen can be used as fuel on a global scale we must establish cost effective means of producing, storing, and distributing the gas, develop cost efficient technologies for converting hydrogen to electricity (e.g. fuel cells), and creating the infrastructure to support all this. Sorensen is the only text available that provides up to date coverage of all these issues at a level appropriate for the technical reader. The book not only describes the "how" and "where" aspects of hydrogen fuels cells usage, but also the obstacles and benefits of its use, as well as the social implications (both economically and environmental). Written by a world-renowned researcher in energy systems, this thoroughly illustrated and cross-referenced book is an excellent reference for researchers, professionals and students in the field of renewable energy. Updated sections on PEM fuel cells, Molten carbonate cells, Solid Oxide cells and Biofuel cells Updated material to reflect the growing commercial acceptance of stationary and portable fuel cell systems, while also recognizing the ongoing research in automotive fuel cell systems A new example of a regional system based on renewable energy sources reflects the growing international attention to uses of renewable energy as part of the energy grid Examples of life cycle analysis of environmental and social impacts

Download or read book Converted written by Richie Waddell and published by CreateSpace. This book was released on 2011-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Converted! is much more than an installation manual - although it serves as that as well. You will learn everything you need to know to take water and put it through a process called electrolysis to separate the hydrogen from the oxygen as you drive. It silently flows into your vehicle's combustion system and give better economy, a quieter cooler engine and less engine wear. This process, properly installed and tuned, is safe and effective because it creates hydrogen on demand and radically improves the fuel economy of a vehicle. In language understandable by virtually anyone the book explains the process. There are many photos and illustrations to guide you through. You can purchase the parts you need on your own but Richie has done all the work for you and will send you a complete kit at a very reasonable price if you decide to go ahead and save money while you reduce the pollution in the environment.

Download or read book Modeling and Control of Fuel Cells written by M. H. Nehrir and published by John Wiley & Sons. This book was released on 2009-03-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book available on fuel cell modeling and control with distributed power generation applications The emerging fuel cell (FC) technology is growing rapidly in its applications from small-scale portable electronics to large-scale power generation. This book gives students, engineers, and scientists a solid understanding of the FC dynamic modeling and controller design to adapt FCs to particular applications in distributed power generation. The book begins with a fascinating introduction to the subject, including a brief history of the U.S. electric utility formation and restructuring. Next, it provides coverage of power deregulation and distributed generation (DG), DG types, fuel cell DGs, and the hydrogen economy. Building on that foundation, it covers: Principle operations of fuel cells Dynamic modeling and simulation of PEM and solid-oxide fuel cells Principle operations and modeling of electrolyzers Power electronic interfacing circuits for fuel cell applications Control of grid-connected and stand-alone fuel cell power generation systems Hybrid fuel cell–based energy system case studies Present challenges and the future of fuel cells MATLAB/SIMULINK-based models and their applications are available via a companion Web site. Modeling and Control of Fuel Cells is an excellent reference book for students and professionals in electrical, chemical, and mechanical engineering and scientists working in the FC area.

Download or read book 52 Random Weekend Projects written by The King of Random and published by St. Martin's Griffin. This book was released on 2020-03-10 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: From one of the most popular project channels on YouTube comes a how-to book on building things that go boom. Grant Thompson, "The King of Random," has created one of the most popular project channels on YouTube, featuring awesome videos such as How to Make a Laser Assisted Blowgun and Assassin’s Micro Crossbow. He currently has almost 10 million subscribers, posts 5 times a week, and averages over 40 million views a month. Partnering with Grant is Ted Slampyak, the artist behind the #1 New York Times bestseller 100 Deadly Skills. 52 Random Weekend Projects: For Budding Inventors and Backyard Builders is a guide that enables ordinary folks to build an impressive arsenal of projects. These crafts combine some of Grant’s most popular projects—Matchbox Rockets, Pocket Slingshot Super Shooters, Proto-Putty, Ninja Balls, Mini Matchstick Guns, The Clothespin Pocket Pistol—with many new ones, providing clear instructions on how to build them step-by-step. Broken down into Beginner, Intermediate, and Advanced sections, 52 Random Weekend Projects is loaded with truly amazing projects, including: - Mousetrap Handgun - Mini Solar Scorcher - Air Vortex Canon - Air Mounted Skewer Shooter - Paracord Bullwhip - Bottle Cap Party Whistle - Ninja Stress Balls - Tablecloth Parachute - Skyblaster Slingshot And many more!

Download or read book Hydrogen Fuel Cell Technology for Stationary Applications written by Badea, Gheorghe and published by IGI Global. This book was released on 2021-04-30 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional energy sources have gained and will continue to gain an increasing share of energy systems around the world. Today, hydrogen is recognized as a non-polluting energy carrier because it does not contribute to global warming if it is produced from renewable sources. Hydrogen is already part of today's chemical industry, but as an energy source, its rare advantages can only be obtained with the help of technologies. Currently, the fuel cell is considered the cleanest sustainable energy. With the development of fuel cells, hydrogen-based energy generation becomes a reality. Hydrogen Fuel Cell Technology for Stationary Applications is an essential publication that focuses on the advantages of hydrogen as a primary energy center and addresses its use in the sustainable future of stationary applications. While highlighting a broad range of topics including cost expectations, production methods, and social impact, this publication explores all aspects of the implementation and dissemination of fuel cell technology in the hope of establishing a sustainable marketplace for it. This book is ideally designed for fuel cell manufacturers, architects, electrical engineers, civil engineers, environmental engineers, advocates, manufacturers, mechanics, researchers, academicians, and students.

Download or read book Integration of Alternative Sources of Energy written by Felix A. Farret and published by John Wiley & Sons. This book was released on 2006-04-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique electrical engineering approach to alternative sources ofenergy Unlike other books that deal with alternative sources of energyfrom a mechanical point of view, Integration of Alternative Sourcesof Energy takes an electrical engineering perspective. Moreover,the authors examine the full spectrum of alternative and renewableenergy with the goal of developing viable methods of integratingenergy sources and storage efficiently. Readers become thoroughlyconversant with the principles, possibilities, and limits ofalternative and renewable energy. The book begins with a general introduction and then reviewsprinciples of thermodynamics. Next, the authors explore both commonand up-and-coming alternative energy sources, including hydro,wind, solar, photovoltaic, thermosolar, fuel cells, and biomass.Following that are discussions of microturbines and inductiongenerators, as well as a special chapter dedicated to energystorage systems. After setting forth the fundamentals, the authorsfocus on how to integrate the various energy sources for electricalpower production. Discussions related to system operation,maintenance, and management, as well as standards forinterconnection, are also set forth. Throughout the book, diagrams are provided to demonstrate theelectrical operation of all the systems that are presented. Inaddition, extensive use of examples helps readers better grasp howintegration of alternative energy sources can beaccomplished. The final chapter gives readers the opportunity to learn about theHOMER Micropower Optimization Model. This computer model, developedby the National Renewable Energy Laboratory (NREL), assists in thedesign of micropower systems and facilitates comparisons of powergeneration techniques. Readers can download the software from theNREL Web site. This book is a must-read for engineers, consultants, regulators,and environmentalists involved in energy production and delivery,helping them evaluate alternative energy sources and integrate theminto an efficient energy delivery system. It is also a superiortextbook for upper-level undergraduates and graduate students.

Download or read book Bifacial Photovoltaics written by Joris Libal and published by Institution of Engineering and Technology. This book was released on 2018-10-19 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bifacial photovoltaic (PV) modules are able to utilize light from both sides and can therefore significantly increase the electric yield of PV power plants, thus reducing the cost and improving profitability. Bifacial PV technology has a huge potential to reach a major market share, in particular when considering utility scale PV plants. Accordingly, bifacial PV is currently attracting increasing attention from involved engineers, scientists and investors.

Download or read book Photoelectrochemical Hydrogen Production written by Roel van de Krol and published by Springer Science & Business Media. This book was released on 2011-11-09 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrochemical Hydrogen Production describes the principles and materials challenges for the conversion of sunlight into hydrogen through water splitting at a semiconducting electrode. Readers will find an analysis of the solid state properties and materials requirements for semiconducting photo-electrodes, a detailed description of the semiconductor/electrolyte interface, in addition to the photo-electrochemical (PEC) cell. Experimental techniques to investigate both materials and PEC device performance are outlined, followed by an overview of the current state-of-the-art in PEC materials and devices, and combinatorial approaches towards the development of new materials. Finally, the economic and business perspectives of PEC devices are discussed, and promising future directions indicated. Photoelectrochemical Hydrogen Production is a one-stop resource for scientists, students and R&D practitioners starting in this field, providing both the theoretical background as well as useful practical information on photoelectrochemical measurement techniques. Experts in the field benefit from the chapters on current state-of-the-art materials/devices and future directions.