Download or read book Ullmann s Polymers and Plastics written by Wiley-VCH and published by John Wiley & Sons. This book was released on 2016-03-18 with total page 1934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your personal Ullmann's: Chemical and physical characteristics, production processes and production figures, main applications, toxicology and safety information are all to be found here in one single resource - bringing the vast knowledge of the Ullmann's Encyclopedia to the desks of industrial chemists and chemical engineers. The ULLMANN’S perspective on polymers and plastics brings reliable information on more than 1500 compounds and products straight to your desktop Carefully selected “best of” compilation of 61 topical articles from the Encyclopedia of Industrial Chemistry on economically important polymers provide a wealth of chemical, physical and economic data on more than 1000 different polymers and hundreds of modifications Contains a wealth of information on the production and use of all industrially relevant polymers and plastics, including organic and inorganic polymers, fibers, foams and resins Extensively updated: more than 30% of the content has been added or updated since the launch of the 7th edition of the Ullmann’s encyclopedia in 2011 and is now available in print for the first time 4 Volumes

Download or read book Polymers Opportunities and Risks I written by Peter Eyerer and published by Springer Science & Business Media. This book was released on 2010-07-31 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their first industrial use polymers have gained a tremendous success. The two volumes of "Polymers - Opportunities and Risks" elaborate on both their potentials and on the impact on the environment arising from their production and applications. Volume 11 "Polymers - Opportunities and Risks I: General and Environmental Aspects" is dedicated to the basics of the engineering of polymers – always with a view to possible environmental implications. Topics include: materials, processing, designing, surfaces, the utilization phase, recycling, and depositing. Volume 12 "Polymers - Opportunities and Risks II: Sustainability, Product Design and Processing" highlights raw materials and renewable polymers, sustainability, additives for manufacture and processing, melt modification, biodegradation, adhesive technologies, and solar applications. All contributions were written by leading experts with substantial practical experience in their fields. They are an invaluable source of information not only for scientists, but also for environmental managers and decision makers.

Download or read book Plastics written by H. Macskásy and published by Elsevier. This book was released on 2012-12-02 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here in detail is a number of generally accepted, standardised inflammability tests. A comprehensive survey of ISO, IEC, ASTN, VL, BS and DIN is given and other standards are also mentioned. The testing of materials, products and full-scale model-testing are described. Furthermore, the book describes methods for reducing the inflammability of plastics, various techniques for fires involving plastics and fire regulations.

Download or read book Phenolic Resins written by A. Gardziella and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vastly expanded 2nd edition contains all the new developments since 1985. It describes significant new phenolic resin chemistry, new applications with up-to-date developments, and includes detailed standardized test methods important for ISO 9001 ff certification.

Download or read book Ullmann s Industrial Toxicology written by Wiley-VCH and published by John Wiley & Sons. This book was released on 2005-10-28 with total page 1193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The one-stop resource for health protection professionals, environmental scientists and safety engineers. Since the entire 40-volume Ullmann's Encyclopedia is inaccessible to many readers - particularly individuals, smaller companies or institutes - all the information on industrial toxicology, ecotoxicology, process safety as well as occupational health and safety has been condensed into this convenient 2-volume set. Based on the latest online edition of Ullmann's containing articles never been before in print, this ready reference provides practical information on applying the science of toxicology in both the occupational and environmental setting, and explains the fundamentals necessary for an understanding of the effects of chemical hazards on humans and ecosystems. The detailed and meticulously edited articles have been written by renowned experts from industry and academia, and much of the information has been thoroughly revised. Alongside explanations of safety regulations and legal aspects, this set covers food additives, toxic agents as well as medical and therapeutical issues. Top-quality illustrations, clear diagrams and charts combined with an extensive use of tables enhance the presentation and provide a unique level of detail. Deeper insights into any given area of interest is offered by referenced contributions, while rapid access to a particular subject is enhanced by both a keyword and author index.

Download or read book Characteristics and Analysis of Non Flammable Polymers written by T.R Crompton and published by Smithers Rapra. This book was released on 2013-03-04 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years there has been an increasing demand for fire retardant versions of a range of plastics. Such applications are fire retardancy in vehicles, aircraft, manned space vehicles, marine and industrial applications such as electronics and a wide range of applications in the building industry including roofing and interior walls. Also in domestic applications such as furniture, clothes, bedding, upholstery and electrical goods. Fire retardancy in polymers can be achieved by either of three ways. Firstly there are forms of polymers, such as polytetrafluoroethylene, which are intrinsically fire retardant. The second type are rendered fire retardant by the inclusion of a suitable additive in the formulation. These include additives based on bromine, antimony, nitrogen phosphorus and silicon. An essential requirement for fire retardant polymers used in enclosed spaces is that they do not release any toxic products upon combustion. In this respect antinomy containing additives are going out of favour due to the release of toxic antimony volatiles upon combustion. Thirdly, introduction of intumescence into polymers by the introduction of suitable compounds is being increasingly used as a means of imparting fire retardancy in polymers. There exists a plethora of methods used to assess fire retardancy in polymers. These are discussed and summarised in this book. The book will be of interest not only to working in industry but also to design engineers and producers in the polymer fabrication industries.

Download or read book Phenolic Resins written by Andre Knop and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Methods of Polymer Analysis written by T.R Crompton and published by Smithers Rapra. This book was released on 2013-01-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the various thermal methods used for the characterisation of polymer properties and composition. All these methods study the properties of polymers as they change with temperature. The methods discussed in this book are: differential photocalorimetry, differential scanning calorimetry, dielectric thermal analysis, differential thermal analysis, dynamic mechanical analysis, evolved gas analysis, gas chromatography, gas chromatography combined with mass spectrometry, mass spectrometry, microthermal analysis, thermal volatilisation, thermogravimetric analysis and thermomechanical analysis. Each technique is discussed in detail and examples of the use of each technique are also given. Each chapter has an extensive list of references so that the reader can follow up topics of interest. This book will be a useful reference for those who already use any of these thermal methods but will also be of interest to undergraduates and those who are just starting to use these techniques.

Download or read book Physical Testing of Plastics written by T. R Crompton and published by Smithers Rapra. This book was released on 2012-01-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the physical rather than the chemical examination of the properties of polymers on the basis of the type of equipment used, examples of the applications of these techniques are given. Techniques examined include thermal analysis (thermogravimetric analysis and evolved gas analysis), dynamic mechanical analysis and thermomechanical analysis, dielectric thermal analysis, ESR, MALDI, luminescence testing, photocalorimetry testing and the full range of equipment for mechanical, thermal, electrical, rheological, particle size, molecular weight.

Download or read book Introduction to Safety Science written by Albert Kuhlmann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years "safety technology" has constituted the essential instrument for the prevention of accidents as a direct result of handling new technology. Its awareness of the interactions prevalent in natural science causes safety technology to act on the basis of actual accidents, and it Ulilizes to their fullest extent any means provided by the engineering sciences. Man proceeds in a general direction towards preselVation and improvement, thus working towards the optimization of the technical design. However. a new set of basic problems presented itself the moment new large-scale technologies were introduced into the areas of processing, energy, and traffic, thereby creating a considerable amount of ad ditional danger potential. This also signified the end of an era when safety technology could be practiced chiefly on the basis of accident statistics. For ethical reasons it became necessary that a credible prognosis as to the type and effect of accidents took the place, or at least supplemented, the hitherto practiced purely reactive methods. The realization that the available means of safety technology were no longer sufficient in a highly technologized environment spurred the demand for entirely new concepts which would eventually lead to a higher degree of safety. A decisive step had to be taken away from a purely technical approach and fOwards and all-encompassing look at accident systems, because man had become aware of the fact that accidents will always be a part of the interaction between man, technology, and environment.

Download or read book Modern Styrenic Polymers written by John Scheirs and published by John Wiley & Sons. This book was released on 2003-03-28 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title addresses the latest developments in the field, covering the major advances that have occurred over the past five years in the polymerization and structure of new generation polystyrenes that are broadening its scope of application. It covers the advent of branched polystyrenes, syndiotactic polystyrene, high-molecular weight general purpose PS, styrenic interpolymers, and clear SBS copolymers Presents voluminous research previously only reported at conferences in one reference Unique coverage of a topic not found in the field

Download or read book Polymer Reference Book written by Thomas Roy Crompton and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to familiarise the reader with all aspects of the techniques used in the examination of polymers, covering chemical, physiochemical and purely physical methods of examination. The types of techniques available to the polymer chemist and technician are described, and their capabilities, limitations and applications are discussed. The book is intended, for all staff who are concerned with instrumentation and methodology in the polymer laboratory including laboratory designers, engineers and chemists, and also those concerned with the implementation of analytical specifications and process control limits.

Download or read book Plastics written by Stephan Engelsmann and published by Walter de Gruyter. This book was released on 2012-11-05 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics are high-performance materials of wide use in the built environment. Their versatile technical properties are particularly fascinating. A broad range of form-giving and finishing processes makes plastic especially interesting for complex geometries in combination with digital planning processes. Following the pioneering plastic structures of the 1970s, a number of spectacular buildings have in recent years highlighted the outstanding technical and aesthetic potential of the material. Until now, however, there has been no systematic treatment of the use of plastic in architecture. This book seeks to fill that gap by providing an introduction to the structural and design possibilities of plastic. It introduces the material and its specific characteristics, describes various types of plastic in terms of their relevance for building, explains processing technologies and presents typical products and components. A concise presentation of twenty-five international built projects – organized by the type of application and the plastic involved – documents the broad range of plastic in architecture. Finally, a look ahead at the future describes the current state of the art in materials research.

Download or read book Ullmann s Encyclopedia of Industrial Chemistry written by and published by . This book was released on 2003 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Polymer Analysis written by T.R. Crompton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to familiarize the reader with the practical aspects of polymer analysis. A wealth of practical detail, including some detailed methods is included. The book covers not only the analysis of the main types of polymers and copolymers now in use commercially, but also the analysis of minor non-polymeric components of the polymer formulation, whether they be deliberately added, such as processing additives, or whether they occur adventitiously, such as moisture and residual monomers and solvent. A broad scheme for the examination of polymers is discussed in Chapter 2. Practically all of the major newer analytical techniques and many of the older classical techniques, have been used to examine polymers and their additive systems. As so many different polymers are now used commercially it is also advisable when attempting to identify a polymer to classify it by first separating it into pure polymeric and gross non polymeric fractions (Chapter Z) and then carrying out at least a qualitative elemental analysis and possible a quantitative analysis (Chapters 3 and 4) and then in some cases, depending on the elements found, to carry out functional group analysis (Chapters 6 and 9).

Download or read book Explosion Protection written by Heinrich Groh and published by Elsevier. This book was released on 2003-12-18 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes Hazardous or Electrical Area Classification simple. In plants processing flammable materials, every effort is made to avoid the escape of such materials and in addition, stringent measures are taken to exclude sources of ignition. A complex array of standards surround this topic which has lead to an overly conservative approach being taken. This type of approach means that much more expensive electrical apparatus than is necessary is installed.To avoid this unnecessary expenditure, Dr Groh clearly explains the relevant standards, so that accurate assessment of the risks associated with hazardous areas is possible. He also identifies possible ignition sources and methods of designing apparatus which do not cause sparks thereby maintaining safety.* Covers must-have information regarding IEC/CENELEC standards in electrical or hazardous area classification* Provides a clear overview of a complex area

Download or read book Blowing Agents and Foaming Processes 2005 written by and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 7th international conference was dedicated to blowing agents and process technology for foamed plastics and rubber. These proceedings provide excellent coverage of the key topics of interest to the industry. There are a good variety of papers on innovations in foaming technology and new applications of blowing agents, with sessions on foaming polyurethane and thermoplastics. There is also a very interesting overview paper on environmental issues and new legislation affecting the industry, particularly in construction applications.