Download or read book Boundary Scan Test written by Harry Bleeker and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ever-increasing miniaturization of digital electronic components is hampering the conventional testing of Printed Circuit Boards (PCBs) by means of bed-of-nails fixtures. Basically this is caused by the very high scale of integration of ICs, through which packages with hundreds of pins at very small pitches of down to a fraction of a millimetre, have become available. As a consequence the trace distances between the copper tracks on a printed circuit board cmne down to the same value. Not only the required small physical dimensions of the test nails have made conventional testing unfeasible, but also the complexity to provide test signals for the many hundreds of test nails has grown out of limits. Therefore a new board test methodology had to be invented. Following the evolution in the IC test technology. Boundary-Scan testing hm; become the new approach to PCB testing. By taking precautions in the design of the IC (design for testability), testing on PCB level can be simplified 10 a great extent. This condition has been essential for the success of the introduction of Boundary-Sc,m Test (BST) at board level.
Download or read book The Boundary Scan Handbook written by Kenneth P. Parker and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boundary-Scan, formally known as IEEE/ANSI Standard 1149.1-1990, is a collection of design rules applied principally at the Integrated Circuit (IC) level that allow software to alleviate the growing cost of designing, producing and testing digital systems. A fundamental benefit of the standard is its ability to transform extremely difficult printed circuit board testing problems that could only be attacked with ad-hoc testing methods into well-structured problems that software can easily deal with. IEEE standards, when embraced by practicing engineers, are living entities that grow and change quickly. The Boundary-Scan Handbook, Second Edition: Analog and Digital is intended to describe these standards in simple English rather than the strict and pedantic legalese encountered in the standards. The 1149.1 standard is now over eight years old and has a large infrastructure of support in the electronics industry. Today, the majority of custom ICs and programmable devices contain 1149.1. New applications for the 1149.1 protocol have been introduced, most notably the `In-System Configuration' (ISC) capability for Field Programmable Gate Arrays (FPGAs). The Boundary-Scan Handbook, Second Edition: Analog and Digital updates the information about IEEE Std. 1149.1, including the 1993 supplement that added new silicon functionality and the 1994 supplement that formalized the BSDL language definition. In addition, the new second edition presents completely new information about the newly approved 1149.4 standard often termed `Analog Boundary-Scan'. Along with this is a discussion of Analog Metrology needed to make use of 1149.1. This forms a toolset essential for testing boards and systems of the future.
Download or read book The Boundary Scan Handbook written by Kenneth P. Parker and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boundary-Scan, formally known as IEEE/ANSI Standard 1149.1-1990, is a collection of design rules applied principally at the integrated circuit (IC) level that allow software to alleviate the growing cost of designing and producing digital systems. The primary benefit of the standard is its ability to transform extremely printed circuit board testing problems that could only be attacked with ad-hoc testing methods into well-structured problems that software can easily and swiftly deal with. The Boundary-Scan Handbook is for professionals in the electronics industry who are concerned with the practical problems of competing successfully in the face of rapid-fire technological change. Since many of these changes affect our ability to do testing and hence cost-effective production, the advent of the 1149.1 standard is rightly looked upon as a major breakthrough. However, there is a great deal of misunderstanding about what to expect of 1149.1 and how to use it. Because of this, The Boundary-Scan Handbook is not a rehash of the 1149.1 standard, nor does it intend to be a tutorial on the basics of its workings. The standard itself should always be consulted for this, being careful to follow supplements issued by the IEEE that clarify and correct it. Rather, The Boundary-Scan Handbook motivates proper expectations and explains how to use the standard successfully.
Download or read book The Boundary Scan Handbook written by Kenneth P. Parker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: In February of 1990, the balloting process for the IEEE proposed standard P1149.1 was completed creating IEEE Std 1149.1-1990. Later that summer, in record time, the standard won ratification as an ANSI standard as well. This completed over six years of intensive cooperative effort by a diverse group of people who share a vision on solving some of the severe testing problems that exist now and are steadily getting worse. Early in this process, someone asked me if 1 thought that the P1l49.l effort would ever bear fruit. 1 responded somewhat glibly that "it was anyone's guess". Well, it wasn't anyone's guess, but rather the faith of a few individuals in the proposition that many testing problems could be solved if a multifaceted industry could agree on a standard for all to follow. Four of these individuals stand out; they are Harry Bleeker, Colin Maunder, Rodham Tulloss, and Lee Whetsel. In that I am convinced that the 1149.1 standard is the most significant testing development in the last 20 years, I personally feel a debt of gratitude to them and all the people who labored on the various Working Groups in its creation.
Download or read book The Test Access Port and Boundary scan Architecture written by Colin M. Maunder and published by . This book was released on 1990 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Standard Test Access Port and Boundary scan Architecture written by IEEE Standards Board and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Advanced System on Chip Test Design and Optimization written by Erik Larsson and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOC test design and its optimization is the topic of Introduction to Advanced System-on-Chip Test Design and Optimization. It gives an introduction to testing, describes the problems related to SOC testing, discusses the modeling granularity and the implementation into EDA (electronic design automation) tools. The book is divided into three sections: i) test concepts, ii) SOC design for test, and iii) SOC test applications. The first part covers an introduction into test problems including faults, fault types, design-flow, design-for-test techniques such as scan-testing and Boundary Scan. The second part of the book discusses SOC related problems such as system modeling, test conflicts, power consumption, test access mechanism design, test scheduling and defect-oriented scheduling. Finally, the third part focuses on SOC applications, such as integrated test scheduling and TAM design, defect-oriented scheduling, and integrating test design with the core selection process.
Download or read book VLSI Test Principles and Architectures written by Laung-Terng Wang and published by Elsevier. This book was released on 2006-08-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to new DFT methods that will show the readers how to design a testable and quality product, drive down test cost, improve product quality and yield, and speed up time-to-market and time-to-volume. Most up-to-date coverage of design for testability. Coverage of industry practices commonly found in commercial DFT tools but not discussed in other books. Numerous, practical examples in each chapter illustrating basic VLSI test principles and DFT architectures.
Download or read book An Introduction to Logic Circuit Testing written by Parag K. Lala and published by Springer Nature. This book was released on 2022-06-01 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Logic Circuit Testing provides a detailed coverage of techniques for test generation and testable design of digital electronic circuits/systems. The material covered in the book should be sufficient for a course, or part of a course, in digital circuit testing for senior-level undergraduate and first-year graduate students in Electrical Engineering and Computer Science. The book will also be a valuable resource for engineers working in the industry. This book has four chapters. Chapter 1 deals with various types of faults that may occur in very large scale integration (VLSI)-based digital circuits. Chapter 2 introduces the major concepts of all test generation techniques such as redundancy, fault coverage, sensitization, and backtracking. Chapter 3 introduces the key concepts of testability, followed by some ad hoc design-for-testability rules that can be used to enhance testability of combinational circuits. Chapter 4 deals with test generation and response evaluation techniques used in BIST (built-in self-test) schemes for VLSI chips. Table of Contents: Introduction / Fault Detection in Logic Circuits / Design for Testability / Built-in Self-Test / References
Download or read book Designing Embedded Hardware written by John Catsoulis and published by "O'Reilly Media, Inc.". This book was released on 2002 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent readers who want to build their own embedded computer systems-- installed in everything from cell phones to cars to handheld organizers to refrigerators-- will find this book to be the most in-depth, practical, and up-to-date guide on the market. Designing Embedded Hardware carefully steers between the practical and philosophical aspects, so developers can both create their own devices and gadgets and customize and extend off-the-shelf systems. There are hundreds of books to choose from if you need to learn programming, but only a few are available if you want to learn to create hardware. Designing Embedded Hardware provides software and hardware engineers with no prior experience in embedded systems with the necessary conceptual and design building blocks to understand the architectures of embedded systems. Written to provide the depth of coverage and real-world examples developers need, Designing Embedded Hardware also provides a road-map to the pitfalls and traps to avoid in designing embedded systems. Designing Embedded Hardware covers such essential topics as: The principles of developing computer hardware Core hardware designs Assembly language concepts Parallel I/O Analog-digital conversion Timers (internal and external) UART Serial Peripheral Interface Inter-Integrated Circuit Bus Controller Area Network (CAN) Data Converter Interface (DCI) Low-power operation This invaluable and eminently useful book gives you the practical tools and skills to develop, build, and program your own application-specific computers.
Download or read book Digital Circuit Testing written by Francis C. Wong and published by Elsevier. This book was released on 2012-12-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent technological advances have created a testing crisis in the electronics industry--smaller, more highly integrated electronic circuits and new packaging techniques make it increasingly difficult to physically access test nodes. New testing methods are needed for the next generation of electronic equipment and a great deal of emphasis is being placed on the development of these methods. Some of the techniques now becoming popular include design for testability (DFT), built-in self-test (BIST), and automatic test vector generation (ATVG). This book will provide a practical introduction to these and other testing techniques. For each technique introduced, the author provides real-world examples so the reader can achieve a working knowledge of how to choose and apply these increasingly important testing methods.
Download or read book Design to Test written by John Turino and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second edition of Design to Test. The first edition, written by myself and H. Frank Binnendyk and first published in 1982, has undergone several printings and become a standard in many companies, even in some countries. Both Frank and I are very proud of the success that our customers have had in utilizing the information, all of it still applicable to today's electronic designs. But six years is a long time in any technology field. I therefore felt it was time to write a new edition. This new edition, while retaining the basic testability prin ciples first documented six years ago, contains the latest material on state-of-the-art testability techniques for electronic devices, boards, and systems and has been completely rewritten and up dated. Chapter 15 from the first edition has been converted to an appendix. Chapter 6 has been expanded to cover the latest tech nology devices. Chapter 1 has been revised, and several examples throughout the book have been revised and updated. But some times the more things change, the more they stay the same. All of the guidelines and information presented in this book deal with the three basic testability principles-partitioning, control, and visibility. They have not changed in years. But many people have gotten smarter about how to implement those three basic test ability principles, and it is the aim of this text to enlighten the reader regarding those new (and old) testability implementation techniques.
Download or read book System on Chip Test Architectures written by Laung-Terng Wang and published by Morgan Kaufmann. This book was released on 2010-07-28 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronics testing has a legacy of more than 40 years. The introduction of new technologies, especially nanometer technologies with 90nm or smaller geometry, has allowed the semiconductor industry to keep pace with the increased performance-capacity demands from consumers. As a result, semiconductor test costs have been growing steadily and typically amount to 40% of today's overall product cost. This book is a comprehensive guide to new VLSI Testing and Design-for-Testability techniques that will allow students, researchers, DFT practitioners, and VLSI designers to master quickly System-on-Chip Test architectures, for test debug and diagnosis of digital, memory, and analog/mixed-signal designs. Emphasizes VLSI Test principles and Design for Testability architectures, with numerous illustrations/examples. Most up-to-date coverage available, including Fault Tolerance, Low-Power Testing, Defect and Error Tolerance, Network-on-Chip (NOC) Testing, Software-Based Self-Testing, FPGA Testing, MEMS Testing, and System-In-Package (SIP) Testing, which are not yet available in any testing book. Covers the entire spectrum of VLSI testing and DFT architectures, from digital and analog, to memory circuits, and fault diagnosis and self-repair from digital to memory circuits. Discusses future nanotechnology test trends and challenges facing the nanometer design era; promising nanotechnology test techniques, including Quantum-Dots, Cellular Automata, Carbon-Nanotubes, and Hybrid Semiconductor/Nanowire/Molecular Computing. Practical problems at the end of each chapter for students.
Download or read book Essentials of Electronic Testing for Digital Memory and Mixed Signal VLSI Circuits written by M. Bushnell and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.
Download or read book Mastering SoapUI written by Pranai Nandan and published by Packt Publishing Ltd. This book was released on 2016-08-30 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the art of testing and automating your SOA using SoapUI About This Book Design real-time test automation frameworks for Enterprise applications using SoapUI Learn how to solve test automation issues for complex systems A complete guide to understanding SOA automation from quality assurance to business assurance Who This Book Is For The book is intended for test architects, SOA test specialists, automation testers, test managers, and software developers who have a good understanding of SOA, web services, Groovy Scripting, and the SOAP UI tool. What You Will Learn Familiarize yourself with Test Web services from functional, nonfunctional, and security aspects Learn to test real-time service orchestrations Design test automation solutions for SOA-based Enterprise applications Learn multilayer test automation Selenium plus SoapUI under a single umbrella Integrate your SoapUI framework with Jenkins In Detail SoapUI is an open-source cross-platform testing application that provides complete test coverage and supports all the standard protocols and technologies. This book includes real-time examples of implementing SoapUI to achieve quality and business assurance. Starting with the features and functionalities of SoapUI, the book will then focus on functional testing, load testing, and security testing of web services. Furthermore, you will learn how to automate your services and then design data-driven, keyword-driven, and hybrid-driven frameworks in SoapUI. Then the book will show you how to test UIs and services using SoapUI with the help of Selenium. You will also learn how to integrate SoapUI with Jenkins for CI and SoapUI test with QC with backward- and forward-compatibility. The final part of the book will show you how to virtualize a service response in SoapUI using Service Mocking. You will finish the journey by discovering the best practices for SoapUI test automation and preparing yourself for the online certification of SoapUI. Style and approach Filled with real-time examples, this book will help readers take their knowledge to the next level. This book is a comprehensive guide that will cover the end-to-end life cycle of implementing SoapUI in various phases of software testing and the software development life cycle.
Download or read book Test and Measurement Know It All written by Jon S. Wilson and published by Newnes. This book was released on 2008-09-26 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Newnes Know It All Series takes the best of what our authors have written to create hard-working desk references that will be an engineer's first port of call for key information, design techniques and rules of thumb. Guaranteed not to gather dust on a shelf! Field Application engineers need to master a wide area of topics to excel. The Test and Measurement Know It All covers every angle including Machine Vision and Inspection, Communications Testing, Compliance Testing, along with Automotive, Aerospace, and Defense testing. A 360-degree view from our best-selling authors Topics include the Technology of Test and Measurement, Measurement System Types, and Instrumentation for Test and Measurement The ultimate hard-working desk reference; all the essential information, techniques and tricks of the trade in one volume
Download or read book Principles of Testing Electronic Systems written by Samiha Mourad and published by John Wiley & Sons. This book was released on 2000-07-25 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: A pragmatic approach to testing electronic systems As we move ahead in the electronic age, rapid changes in technology pose an ever-increasing number of challenges in testing electronic products. Many practicing engineers are involved in this arena, but few have a chance to study the field in a systematic way-learning takes place on the job. By covering the fundamental disciplines in detail, Principles of Testing Electronic Systems provides design engineers with the much-needed knowledge base. Divided into five major parts, this highly useful reference relates design and tests to the development of reliable electronic products; shows the main vehicles for design verification; examines designs that facilitate testing; and investigates how testing is applied to random logic, memories, FPGAs, and microprocessors. Finally, the last part offers coverage of advanced test solutions for today's very deep submicron designs. The authors take a phenomenological approach to the subject matter while providing readers with plenty of opportunities to explore the foundation in detail. Special features include: * An explanation of where a test belongs in the design flow * Detailed discussion of scan-path and ordering of scan-chains * BIST solutions for embedded logic and memory blocks * Test methodologies for FPGAs * A chapter on testing system on a chip * Numerous references
