Download or read book The Boundary Element Method for Engineers and Scientists written by John T. Katsikadelis and published by Academic Press. This book was released on 2016-10-10 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Element Method for Engineers and Scientists: Theory and Applications is a detailed introduction to the principles and use of boundary element method (BEM), enabling this versatile and powerful computational tool to be employed for engineering analysis and design. In this book, Dr. Katsikadelis presents the underlying principles and explains how the BEM equations are formed and numerically solved using only the mathematics and mechanics to which readers will have been exposed during undergraduate studies. All concepts are illustrated with worked examples and problems, helping to put theory into practice and to familiarize the reader with BEM programming through the use of code and programs listed in the book and also available in electronic form on the book’s companion website. Offers an accessible guide to BEM principles and numerical implementation, with worked examples and detailed discussion of practical applications This second edition features three new chapters, including coverage of the dual reciprocity method (DRM) and analog equation method (AEM), with their application to complicated problems, including time dependent and non-linear problems, as well as problems described by fractional differential equations Companion website includes source code of all computer programs developed in the book for the solution of a broad range of real-life engineering problems
Download or read book The Boundary Element Method with Programming written by Gernot Beer and published by Springer Science & Business Media. This book was released on 2008-09-03 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thorough yet understandable introduction to the boundary element method presents an attractive alternative to the finite element method. It not only explains the theory but also presents the implementation of the theory into computer code, the code in FORTRAN 95 can be freely downloaded. The book also addresses the issue of efficiently using parallel processing hardware in order to considerably speed up the computations for large systems. The applications range from problems of heat and fluid flow to static and dynamic elasto-plastic problems in continuum mechanics.
Download or read book The Isogeometric Boundary Element Method written by Gernot Beer and published by Springer Nature. This book was released on 2019-09-21 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the introduction of isogeometric technology to the boundary element method (BEM) in order to establish an improved link between simulation and computer aided design (CAD) that does not require mesh generation. In the isogeometric BEM, non-uniform rational B-splines replace the Lagrange polynomials used in conventional BEM. This may seem a trivial exercise, but if implemented rigorously, it has profound implications for the programming, resulting in software that is extremely user friendly and efficient. The BEM is ideally suited for linking with CAD, as both rely on the definition of objects by boundary representation. The book shows how the isogeometric philosophy can be implemented and how its benefits can be maximised with a minimum of user effort. Using several examples, ranging from potential problems to elasticity, it demonstrates that the isogeometric approach results in a drastic reduction in the number of unknowns and an increase in the quality of the results. In some cases even exact solutions without refinement are possible. The book also presents a number of practical applications, demonstrating that the development is not only of academic interest. It then elegantly addresses heterogeneous and non-linear problems using isogeometric concepts, and tests them on several examples, including a severely non-linear problem in viscous flow. The book makes a significant contribution towards a seamless integration of CAD and simulation, which eliminates the need for tedious mesh generation and provides high-quality results with minimum user intervention and computing.
Download or read book Dual Reciprocity Boundary Element Method written by P.W. Partridge and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is now a well-established numerical technique which provides an efficient alternative to the prevailing finite difference and finite element methods for the solution of a wide range of engineering problems. The main advantage of the BEM is its unique ability to provide a complete problem solution in terms of boundary values only, with substantial savings in computer time and data preparation effort. An initial restriction of the BEM was that the fundamental solution to the original partial differential equation was required in order to obtain an equivalent boundary in tegral equation. Another was that non-homogeneous terms accounting for effects such as distributed loads were included in the formulation by means of domain integrals, thus making the technique lose the attraction of its "boundary-only" character. Many different approaches have been developed to overcome these problems. It is our opinion that the most successful so far is the dual reciprocity method (DRM), which is the subject matter of this book. The basic idea behind this approach is to employ a fundamental solution corresponding to a simpler equation and to treat the remaining terms, as well as other non-homogeneous terms in the original equation, through a procedure which involves a series expansion using global approximating functions and the application of reciprocity principles.
Download or read book The Boundary Element Method for Plate Analysis written by John T. Katsikadelis and published by Elsevier. This book was released on 2014-07-16 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boundary Element Method for Plate Analysis offers one of the first systematic and detailed treatments of the application of BEM to plate analysis and design. Aiming to fill in the knowledge gaps left by contributed volumes on the topic and increase the accessibility of the extensive journal literature covering BEM applied to plates, author John T. Katsikadelis draws heavily on his pioneering work in the field to provide a complete introduction to theory and application. Beginning with a chapter of preliminary mathematical background to make the book a self-contained resource, Katsikadelis moves on to cover the application of BEM to basic thin plate problems and more advanced problems. Each chapter contains several examples described in detail and closes with problems to solve. Presenting the BEM as an efficient computational method for practical plate analysis and design, Boundary Element Method for Plate Analysis is a valuable reference for researchers, students and engineers working with BEM and plate challenges within mechanical, civil, aerospace and marine engineering. One of the first resources dedicated to boundary element analysis of plates, offering a systematic and accessible introductory to theory and application Authored by a leading figure in the field whose pioneering work has led to the development of BEM as an efficient computational method for practical plate analysis and design Includes mathematical background, examples and problems in one self-contained resource
Download or read book Programming the Boundary Element Method written by Gernot Beer and published by Wiley. This book was released on 2001-04-24 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. The book covers two-andthree-dimensional linear and non-linear analysis in potential flow (heat flow and seepage) and static elasticity. Several computer programs are listed in the book and may be downloaded free of charge via the Internet. They include programs and subroutines for: * 2-D analysis of potential problems using the Trefftz method * 2-D and 3-D linear analysis of potential and static elasticity problems using isoparametric elements (single and multiple regions) * implementation of non-linear problems * coupling to finite elements The programs (written in FORTRAN 90) are well documented, and can be employed by the user to gain experience with the method through the solution of small test examples. Furthermore, readers may use them as a starting point for developing their own boundary element package. In addition, exercises are included in most chapters involving the use of the programs with answers given in an Appendix, and a number of interesting industrial applications in the areas of mechanical, civil and geotechnical engineering are presented.
Download or read book Boundary Element Methods in Heat Transfer written by Wrobel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer problems in industry are usually of a very complex nature, simultaneously involving different transfer modes such as conduction, convection, radiation and others. Because of this, very few problems can be solved analytically and one generally has to resort to numerical analysis. The boundary element method is a numerical technique which has been receiving growing attention for solving heat transfer problems because of its unique ability to confine the discretization process to the boundaries of the problem region. This allows major reductions in the data preparation and computer effort necessary to solve complex industrial problems. The purpose of this book is to present efficient algorithms used in conjunction with the boundary element method for the solution of steady and transient, linear and non-linear heat transfer problems. It represents the state-of-the-art of boundary element applications in the field of heat transfer, and constitutes essential reading for researchers and practising engineers involved with this important topic.
Download or read book MATLAB and C Programming for Trefftz Finite Element Methods written by Qing-Hua Qin and published by CRC Press. This book was released on 2008-07-21 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the Trefftz finite element method (FEM) has become a powerful computational tool in the analysis of plane elasticity, thin and thick plate bending, Poisson's equation, heat conduction, and piezoelectric materials, there are few books that offer a comprehensive computer programming treatment of the subject. Collecting results scattered in t
Download or read book The Scaled Boundary Finite Element Method written by John P. Wolf and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel computational procedure called the scaled boundary finite-element method is described which combines the advantages of the finite-element and boundary-element methods : Of the finite-element method that no fundamental solution is required and thus expanding the scope of application, for instance to anisotropic material without an increase in complexity and that singular integrals are avoided and that symmetry of the results is automatically satisfied. Of the boundary-element method that the spatial dimension is reduced by one as only the boundary is discretized with surface finite elements, reducing the data preparation and computational efforts, that the boundary conditions at infinity are satisfied exactly and that no approximation other than that of the surface finite elements on the boundary is introduced. In addition, the scaled boundary finite-element method presents appealing features of its own : an analytical solution inside the domain is achieved, permitting for instance accurate stress intensity factors to be determined directly and no spatial discretization of certain free and fixed boundaries and interfaces between different materials is required. In addition, the scaled boundary finite-element method combines the advantages of the analytical and numerical approaches. In the directions parallel to the boundary, where the behaviour is, in general, smooth, the weighted-residual approximation of finite elements applies, leading to convergence in the finite-element sense. In the third (radial) direction, the procedure is analytical, permitting e.g. stress-intensity factors to be determined directly based on their definition or the boundary conditions at infinity to be satisfied exactly. In a nutshell, the scaled boundary finite-element method is a semi-analytical fundamental-solution-less boundary-element method based on finite elements. The best of both worlds is achieved in two ways: with respect to the analytical and numerical methods and with respect to the finite-element and boundary-element methods within the numerical procedures. The book serves two goals: Part I is an elementary text, without any prerequisites, a primer, but which using a simple model problem still covers all aspects of the method and Part II presents a detailed derivation of the general case of statics, elastodynamics and diffusion.
Download or read book Boundary Element Methods in Engineering Science written by P. K. Banerjee and published by McGraw-Hill (UK). This book was released on 1981 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Elements in Dynamics written by J. Dominguez and published by WIT Press. This book was released on 1993 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference for those who need to acquire detailed knowledge of the formulation, implementation, and practical applications of BEM in dynamics. The author presents research on BEM in dynamics of continua. The main emphasis is on the development of the different boundary element formulations.
Download or read book Boundary Elements Theory and Applications written by John T. Katsikadelis and published by Elsevier. This book was released on 2002-05-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author's ambition for this publication was to make BEM accessible to the student as well as to the professional engineer. For this reason, his maintask was to organize and present the material in such a way so that the book becomes "user-friendly" and easy to comprehend, taking into account only the mathematics and mechanics to which students have been exposed during their undergraduate studies. This effort led to an innovative, in many aspects, way of presentingBEM, including the derivation of fundamental solutions, the integral representation of the solutions and the boundary integral equations for various governing differentialequations in a simple way minimizing a recourse to mathematics with which the student is not familiar. The indicial and tensorial notations, though they facilitate the author's work and allow to borrow ready to use expressions from the literature, have been avoided in the present book. Nevertheless, all the necessary preliminary mathematical concepts have been included in order to make the book complete and self-sufficient. Throughout the book, every concept is followed by example problems, which have been worked out in detail and with all the necessary clarifications. Furthermore, each chapter of the book is enriched with problems-to-solve. These problems serve a threefold purpose. Some of them are simple and aim at applying and better understanding the presented theory, some others are more difficult and aim at extending the theory to special cases requiring a deeper understanding of the concepts, and others are small projects which serve the purpose of familiarizing the student with BEM programming and the programs contained in the CD-ROM. The latter class of problems is very important as it helps students to comprehend the usefulness and effectiveness of the method by solving real-life engineering problems. Through these problems students realize that the BEM is a powerful computational tool and not an alternative theoretical approach for dealing with physical problems. My experience in teaching BEM shows that this is the students' most favorite type of problems. They are delighted to solve them, since they integrate their knowledge and make them feel confident in mastering BEM. The CD-ROM which accompanies the book contains the source codes of all the computer programs developed in the book, so that the student or the engineer can use them for the solution of a broad class of problems. Among them are general potential problems, problems of torsion, thermal conductivity,deflection of membranes and plates, flow of incompressible fluids, flow through porous media, in isotropic or anisotropic, homogeneous or composite bodies, as well as plane elastostatic problems in simply or multiply connected domains. As one can readily find out from the variety of the applications, the book is useful for engineers of all disciplines. The author is hopeful that the present book will introduce the reader to BEM in an easy, smooth and pleasant way and also contribute to itsdissemination as a modern robust computational tool for solving engineering problems.
Download or read book Boundary Element Techniques written by C. A. Brebbia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: VI SOCRATES: I think that we ought to stress that we will write only about things that we have first hand experience in, in a coherent way that will be useful to engineers and other scientists and stressing the formulation without being too mathematical. We should write with integrity and honesty, giving reference to other authors where reference is due, but avoiding mentioning everybody just to be certain that our book is widely advertised. Above all, the book should be clear and useful. PLATO: I think we should include a good discussion of fundamental ideas, of how integral equations are formed, pointing out that they are like two dimensional shadows of three dimensional objects, ... SOCRATES: Stop there! Remember you are not 'the' Plato! PLATO: Sorry, I was carried away. ARISTOTLE: I think that the book should have many applications so that the reader can learn by looking at them how to use the method. SOCRATES: I agree. But we should be careful. It is easy to include many illustra tions and examples in a book in order to disguise its meagre contents. All examples should be relevant. ARISTOTLE: And we should also include a full computer program to give the reader if so he wishes, a working experience of the technique.
Download or read book Boundary Element Technology VI written by C. A. Brebbia and published by . This book was released on 1991 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Approximation Methods for Elliptic Boundary Value Problems written by Olaf Steinbach and published by Springer Science & Business Media. This book was released on 2007-12-22 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unified theory of the Finite Element Method and the Boundary Element Method for a numerical solution of second order elliptic boundary value problems. This includes the solvability, stability, and error analysis as well as efficient methods to solve the resulting linear systems. Applications are the potential equation, the system of linear elastostatics and the Stokes system. While there are textbooks on the finite element method, this is one of the first books on Theory of Boundary Element Methods. It is suitable for self study and exercises are included.
Download or read book Introduction to Finite and Spectral Element Methods Using MATLAB written by Constantine Pozrikidis and published by CRC Press. This book was released on 2014-06-20 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporating new topics and original material, Introduction to Finite and Spectral Element Methods Using MATLAB, Second Edition enables readers to quickly understand the theoretical foundation and practical implementation of the finite element method and its companion spectral element method. Readers gain hands-on computational experience by using
Download or read book Boundary Elements written by C. A. Brebbia and published by WIT Press. This book was released on 1994-05-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This best-selling text provides a simple introduction to the Boundary Element Method. Based on the authors' long teaching experience it is designed to convey in the most effective manner the fundamentals of the method. The book is presented in a way which makes it accessible to both undergraduate and graduate students as well as to practising engineers who want to learn the foundations of the technique. Of particular interest is the way in which Boundary Element concepts are introduced and immediately applied in simple, but useful, computer codes to facilitate understanding. A CD with the complete listing of program codes in Fortran is also included.