Download or read book Boron Nitride Nanostructures Special Issue Editors Philippe Miele Mikhael Bechelany MDPI written by Philippe Miele and published by MDPI. This book was released on 2019-01-08 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Boron Nitride Nanostructures" that was published in Nanomaterials
Download or read book Boron Nitride Nanostructures written by Mikhael Bechelany and published by . This book was released on 2018 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research topic of this Special Issue will consider (i) the design of nanostructured boron nitride nanostructures with controlled crystal structures, porosity, and dimensionality, (ii) the functionalization of boron nitride, and (iii) prospective applications of boron nitride nanostructures and materials. It contains six papers dealing with (i) the exfoliation of hexagonal Boron Nitride (h-BN) in liquid phase by ion intercalation, (ii) effective mechanical properties and thickness determinations of Boron Nitride nanosheets using molecular dynamics simulation, (iii) direct observation of inner-layer inward contractions of multiwalled Boron Nitride nanotubes upon in situ heating, (iv) the alignment of Boron Nitride nanofibers in epoxy composite films for thermal conductivity and dielectric breakdown strength improvement, (v) the effect of Boron Nitride on the thermal and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and (vi) hexagonal Boron Nitride functionalized with Au nanoparticles—properties and potential biological applications
Download or read book Handbook of Nanofibers written by Ahmed Barhoum and published by Springer. This book was released on 2019-09-10 with total page 1300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers all aspects related to Nanofibers, from the experimental set-up for their fabrication to their potential industrial applications. It describes several kinds of nanostructured fibers such as metal oxides, natural polymers, synthetic polymers and hybrid inorganic-polymers or carbon-based materials. The first part of the Handbook covers the fundamental aspects, experimental setup, synthesis, properties and physico-chemical characterization of nanofibers. Specifically, this part details the history of nanofibers, different techniques to design nanofibers, self-assembly in nanofibers, critical parameters of synthesis, fiber alignment, modeling and simulation, types and classifications of nanofibers, and signature physical and chemical properties (i.e. mechanical, electrical, optical and magnetic), toxicity and regulations, bulk and surface functionalization and other treatments to allow them to a practical use. Characterization methods are also deeply discussed here. The second part of the Handbook deals with global markets and technologies and emerging applications of nanofibers, such as in energy production and storage, aerospace, automotive, sensors, smart textile design, energy conversion, tissue engineering, medical implants, pharmacy and cosmetics. Attention is given to the future of research in these areas in order to improve and spread the applications of nanofibers and their commercialization.
Download or read book Microplastics in Water and Wastewater written by Hrissi K. Karapanagioti and published by IWA Publishing. This book was released on 2019-09-15 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the topic of microplastics in water and wastewater. The chapters start with introductory issues related to the growing interest in the scientific community on microplastics and the human water cycle and point out where the microplastics could interact with water. The subsequent chapters examine evidence of the microplastic presence in freshwater, such as in both rivers and lakes, in freshwater biota, and hazardous chemicals associated with microplastics in such systems. Another set of chapters discuss the presence of microplastics in wastewater: their sources; their transfer through a wastewater treatment plant; the concentration of microplastics in effluents throughout the world; the plastic biomedia used in wastewater treatment plants and the effect on the surrounding environment of effluent wastewater pipes. These chapters also discuss the sampling methods, the sample treatment and analysis techniques used so far for microplastics in wastewater. Additionally, the presence of microplastics in sewage sludge and in soils irrigated with wastewater or fertilized with sludge are discussed. The possible impact of plastics and their additives on plants, microalgae, and humans are reviewed and presented in a critical way. Finally, a chapter summarizes all the relevant regulations and initiatives that point to the necessity of a global directive for the protection of the environment from plastic and microplastic pollution. The topic of microplastics in freshwater systems and in wastewater has scarcely been studied and requires more attention. Microplastics in Water and Wastewater aims to bring these initial findings to the attention of a broader audience and especially to operators and managers of freshwater and wastewater systems. It will also be helpful to people already aware of the marine debris problem to understand the sources of microplastics in the oceans, from freshwater systems and wastewater treatment plants.
Download or read book Carbon Nanotubes written by M. Meyyappan and published by CRC Press. This book was released on 2004-07-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary mechanical and unique electronic properties, have garnered much attention in the past five years. With a broad range of potential applications including nanoelectronics, composites, chemical sensors, biosensors, microscopy, nanoelectromechanical systems, and many more, the scientific community is more moti
Download or read book Physics Chemistry and Technology of Solid State Gas Sensor Devices written by Andreas Mandelis and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and development of solid state gas sensor devices began in the 1950s with several uncoordinated independent efforts. The number and pace of these investigations later accelerated in response to increasing pressure placed on the environment and public health by industrial activities. Since 1970, several thousand articles have been written on the subject, and laboratories around the globe have introduced novel methodologies and devices to address needs associated with particular technological developments. Despite the rapid development of this important new technology, very little has been done to review and coordinate data related to sensor science and technology itself. Physics, Chemistry and Technology of Solid State Gas Sensor Devices focuses on the underlying principles of solid state sensor operation and reveals the rich fabric of interdisciplinary science that governs modern sensing devices. Beginning with some historical and scientific background, the text proceeds to a study of the interactions of gases with surfaces. Subsequent chapters present detailed information on the fabrication, performance, and application of a variety of sensors. Types of sensor devices discussed include: Gas-sensitive solid state semiconductor sensors Photonic and photoacoustic gas sensors Fiber optic sensors Piezoelectric quartz crystal microbalance sensors Surface acoustic wave sensors Pyroelectric and thermal sensors For analytical chemists using solid state sensors in environment-related analysis, and for electrical engineers working with solid state sensors, this book will expand and unify their understanding of these devices, both in theory and practice.
Download or read book High Temperature Ceramic Matrix Composites written by R. Naslain and published by Woodhead Publishing Limited. This book was released on 1993 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inorganic and Organometallic Oligomers and Polymers written by J.F. Harrod and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although, carbon is only one of one hundred plus elements, the polymer science lit erature consists primarily of studies on carbon based polymers. In part, this reflects the varied feedstock sources and in part, the type of bonds and bond forming reactions avail able to form organic polymers that are not available to the inorganic and organometallic chemist. However, recent intense interest in polymers with novel optical, electronic or magnetic properties or polymers that can serve as precursors to ceramic, semiconductor, metallic or superconductor materials has served as a driver for the development of novel synthetic routes and characterization techniques that have launched many new inorganic and organometallic oligomers and polymer systems. The following chapters represent an effort to provide an overview of several new and continuing areas of development in inorganic and organometallic polymer science. This book represents the second in a series of books we have edited on inorganic and organometallic polymer chemistry (1. Transformation of Organo-metallics into Common and Exotic Materials, NATO ASI Series Vol 141. 3. Inorganic and Organometallic Polymers with Special Properties, NATO ASI Series in press). In this series, we attempt to develop, for the reader, an understanding of the breadth, depth and potential of inorganic and organometallic polymer science.
Download or read book Aligned Carbon Nanotubes written by Zhifeng Ren and published by Springer Science & Business Media. This book was released on 2012-09-05 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a survey of the physics and fabrication of carbon nanotubes and their applications in optics, electronics, chemistry and biotechnology. It focuses on the structural characterization of various carbon nanotubes, fabrication of vertically or parallel aligned carbon nanotubes on substrates or in composites, physical properties for their alignment, and applications of aligned carbon nanotubes in field emission, optical antennas, light transmission, solar cells, chemical devices, bio-devices, and many others. Major fabrication methods are illustrated in detail, particularly the most widely used PECVD growth technique on which various device integration schemes are based, followed by applications such as electrical interconnects, nanodiodes, optical antennas, and nanocoax solar cells, whereas current limitations and challenges are also be discussed to lay the foundation for future developments.
Download or read book Carbon Nanofibers written by Madhuri Sharon and published by John Wiley & Sons. This book was released on 2021-02-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals and applications of Carbon Nanofiber (CNF). In the first section, the initial chapter on the fundamentals of CNF is by Professor Maheshwar Sharon, the recognized “Father of Carbon Nanotechnology in India”, which powerfully provides a succinct overview of CNFs. This is followed by a chapter on biogenics that have produced unique morphologies of CNF that makes them suitable to various applications. This is followed by a chapter that mainly focuses on nanocomposites, especially those involving nanocomposites of CNF. The role of nanocatalysts and composites in promoting and enhancing the synthesis and application of CNF is then covered, followed by an important chapter on the characterization of CNF. The second section of the book encompasses the various applications of CNF, such as its use as a possible superconductor to adsorb and store hydrogen, and as a microwave absorber. The application of CNF for environmental concerns is also detailed by assessing its usefulness in dye and heavy metal removal from polluted water. The applications that are addressed include lithium-ion battery, solar cell, antenna, cosmetics, usefulness in regenerative medicine, as well as various aspects of agrotechnology.
Download or read book Handbook of Nanocelluloses written by Ahmed Barhoum and published by Springer Nature. This book was released on 2022-07-15 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamental aspects, experimental setup, synthesis, properties, and characterization of different nanocelluloses. It also explores the technology challenges of nanocelluloses and the emerging applications and the global markets of nanocelluloses-based systems. In particular, this book: · Covers the history of nanocelluloses, types and classifications, fabrication techniques, critical processing parameters, physical and chemical properties, surface functionalization, and other treatments to allow practical applications. · Covers all recent aspects of nanocelluloses technologies, from experimental set-up to industrial applications. · Includes new physical, chemical and biological techniques for nanocelluloses fabrication, in-depth treatment of their surface functionalization, and characterization. · Discusses the unique properties of nanocelluloses that can be obtained by modifying their diameter, morphology, composition and dispersion in other materials. · Discusses the properties and morphology of several kinds of dispersion in polymeric materials, such as micro/nanofiberlated cellulose, cellulose nanofibers, cellulose nanocrystals, amorphous cellulose nanoparticles, and hybrid cellulose nanomaterials. · Presents the different techniques for dispersion, and self-assembly of polymeric materials, critical parameters of synthesis, modelling and simulation, and characterization methods. · Highlights a wide range of emerging applications of nanocelluloses, e.g. drug delivery, tissue engineering, medical implants, medical diagnostics and therapy, biosensors, catalysis, energy harvesting, energy storage, water/waste treatment, papermaking, textiles, construction industry, automotive, aerospace and many more. · Provides an outlook on the opportunities and challenges for the fabrication and manufacturing of nanocelluloses in industry. · Provides an in-depth look at the nature of nanocelluloses in terms of their applicability for industrial uses. · Provides in-depth insight and review on most recent types of nanocelluloses-based systems of unique structures and compositions. · Highlights the challenges and interdisciplinary perspective of nanocelluloses-based systems in science, biology, engineering, medicine, and technology, incorporating both fundamentals and applications. - Demonstrates how cutting-edge developments in nanofibers translate into real-world innovations in a range of industry sectors. This Handbook is a valuable reference for materials scientists, biologists, physicians, chemical, biomedical, manufacturing and mechanical engineers working in R&D industry and academia, who want to learn more about how nanocelluloses-based systems are commercially applied.
Download or read book Acrylate Polymers for Advanced Applications written by Ángel Serrano-Aroca and published by BoD – Books on Demand. This book was released on 2020-05-06 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents five chapters, organised into two sections, on the latest developments in acrylate polymers materials in terms of properties, new ideas in design, synthesis and detailed applications. Section I presents three chapters on acrylate polymer properties and advanced applications such as pH dependence acrylate-derivative polyelectrolyte properties and polymer material classification as acrylic heat resistant glass and polycarbonate antiballistic glass. Section II includes two chapters on acrylic-based materials in the form of hydrogels, interpenetrated polymer networks, composites and nanocomposites for biomedical and bioengineering applications such as tissue engineering, antimicrobial therapy, orthopaedics and ophthalmologic devices.
Download or read book An Introduction to Electrospinning and Nanofibers written by Seeram Ramakrishna and published by World Scientific. This book was released on 2005 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research and development of nanofibers has gained much prominence in recent years due to the heightened awareness of its potential applications in the medical, engineering and defense fields. Among the most successful methods for producing nanofibers is the electrospinning process. In this timely book, the areas of electrospinning and nanofibers are covered for the first time in a single volume. The book can be broadly divided into two parts: the first comprises descriptions of the electrospinning process and modeling to obtain nanofibers while the second describes the characteristics and applications of nanofibers. The material is aimed at both newcomers and experienced researchers in the area.
Download or read book Bamboo Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2020-11-18 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes many of the recent developments in the area of bamboo composites with emphasis on new challenges for the synthesis characterization, properties of bamboo composites and practical applications. The book provides an update of all the important areas of (synthesis, processing, properties and application) bamboo fibers and its composites in a comprehensive manner. The chapters contributed by leading researchers from industry, academy, government and private research institutions across the globe benefit academics, researchers, scientists, engineers and students in the field of natural fiber composites.
Download or read book Nanofibers written by Brajesh Kumar and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofibers are well known for their vast range of applications in sensors, catalysts, conductors, tissue engineering, and so on, owing to their high surface-area-to-volume ratio, high porosity, and the ease of tuning their structures, functionalities, and properties This book is a comprehensive overview of the synthesis, characterization, and application of nanofibers. Written by experts in the field, chapters cover such topics as green synthesis of nanofibers, electrospinning of carbon nanofibers, applications of ceramic nanofibers, transparent electrodes for flexible and stretchable electronics, nanoribbons, and much more.
Download or read book Advances in Manufacturing Processes written by Harshit K. Dave and published by Springer Nature. This book was released on 2020-11-30 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Recent Advances in Manufacturing (RAM 2020). This volume, in particular, provides insights into current research trends and opportunities within the manufacturing processes domain such as conventional and unconventional manufacturing, micro and nano manufacturing, chemical and biochemical manufacturing, and computer-integrated manufacturing (CIM). The topics covered include emerging areas of the fourth industrial revolution such as additive manufacturing, sustainable and energy-efficient manufacturing, smart manufacturing, artificial intelligence in manufacturing application, and computer-integrated manufacturing. This book will be useful for to researchers and practitioners alike.
Download or read book Materials Design and Applications written by Lucas F. M. da Silva and published by Springer. This book was released on 2017-03-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features fundamental research and applications in the field of the design and application of engineering materials, predominantly within the context of mechanical engineering applications. This includes a wide range of materials engineering and technology, including metals, e.g., polymers, composites, and ceramics. Advanced applications would include manufacturing in the new or newer materials, testing methods, multi-scale experimental and computational aspects. This book features fundamental research and applications in the design of engineering materials, predominantly within the context of mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. It covers a wide range of materials, including metals, polymers, composites, and ceramics. Advanced applications include the manufacturing of new materials, testing methods, multi-scale experimental and computational aspects. p>