Download or read book Bond Characteristics of Micro Composite Multi Structural Formable Steel Used in Reinforced Concrete Structures written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The bond performance of a unique type of reinforcing steel rebars, claimed to have high corrosion resistance as well as high tensile strength, with concrete was studied. The objective was to investigate the bond behavior of straight rebars made out of this steel, named MMFX, embedded in concrete flexural members and to examine the applicability of the current expressions for bond force to predict the bond capacity of the MMFX bars embedded in concrete. Two phases of experimental investigation was conducted. In the first phase, four beam end specimens were tested and in the second phase eight splice beams were studied. The bond behavior of the MMFX steel bars was found to be similar to that of carbon steel. The bond strength of the MMFX is significantly reduced as the tensile stresses developed in the bar went beyond the proportional limit. Both the ACI code 318-02 equation for bond force and the current equation proposed by the ACI committee 408 for bond force gave conservative prediction for bond force for low stress levels. However, at high stress levels, the prediction of the two equations went to the unconservative side. The non linear behavior of the MMFX stress-strain curve was the reason behind the unconservative prediction. The above two equations were modified to ensure conservative prediction at high stress levels. A second degree best fitting curve was found to be the best to describe the relationship between the splice length and the bond force capacity for both # 6 and # 8 MMFX bars.
Download or read book Bond Characteristics of Micro composite Multi structural Formable Steel Used in Reinforced Concrete Structures written by Hossam Aly Elagroudy and published by . This book was released on 2003 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keywords: MMFX, Splice Length, Splice Specimens, Bond.
Download or read book Behavior of Concrete Bridges Reinforced with High Performance Steel Reinforcing Bars written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance (HP) steel reinforcing bars are characterized by their high tensile strength and enhanced corrosion resistance in comparison to conventional ASTM A 615 Grade 60 steel. Use of HP steel in concrete bridges could lead to potential savings by reducing the amount of steel required based on its higher strength characteristics and expanding the service life of bridges due to its enhanced corrosion resistance. A commercially available steel know Micro-Composite Multi-Structural Formable (MMFX) steel which is conforming to ASTM A 1035, was selected for this study because of its high tensile strength and enhanced corrosion resistance. Comprehensive experimental and analytical programs were carried out to evaluate the mechanical properties of the HP steel bars, its bond characteristics, and the behavior of concrete bridge decks reinforced with HP steel. Research findings showed that HP steel used in this study exhibited much higher tensile strength than that of conventional Grade 60. In addition, the HP steel bars had much lower corrosion rate than Grade 60 bars. Bending HP steel bars reduce its ultimate strength and strain by 6 and 70 percent, respectively. However, when HP steel bent bars are bonded to concrete they develop their full stress-strain capacity. Bond test results indicated that a stress level up to 90 ksi can be developed in #8 HP steel bars without the use of transverse reinforcement. The use of transverse reinforcement increases the bond strength of HP steel reinforcing bars, consequently reaching stress levels in the bars up to 150 ksi. When possible, it is recommended to use a minimum amount of transverse reinforcement to confine spliced bars to ensure ductile behavior and provide warning prior to failure. Direct replacement of Grade 60 with HP steel bars in bridge decks is a conservative approach. However, reducing the amount of HP steel by 33 percent does not impair the ultimate-load carrying capacity or alter the serviceability behavior o.
Download or read book Strengthening of Concrete Structures written by Amr Abdelrahman and published by Springer Nature. This book was released on 2023-01-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents unified design approach for strengthening concrete members with different techniques such as concrete, steel, and FRP jacketing. Preference between the various techniques is explained in light of strengthening limits, procedures, and application for each case. Examples for evaluation of existing structures and design equations for strengthening concrete elements are presented based on the ACI design codes and standards. Numerical examples are also given for different strengthening techniques with illustrations for the construction methodology and detailing for each case.Several case studies are explained starting from problem diagnosis, structure analysis, proposal for different strengthening methodologies, and implementation procedure for the selected scheme. The case studies include structures subjected to gravity loads, lateral loads, elevated temperature, and differential settlement of the foundations. It addresses design and construction errors, environmental impact, and soil movement. The case studies include conventional reinforced concrete, post-tensioned, and precast concrete members.
Download or read book Bond Behavior of High Performance Reinforcing Bars for Concrete Structures written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Bond between the concrete and the reinforcing steel is a major factor affecting the performance of reinforced concrete structures. Advances in material science led to the production of High Performance Steel that has enhanced corrosion resistance and higher strength compared to conventional Grade 60 steel. Such material can lead to more economical design reducing the material requirements for a particular project and expanding its life span. The objective of this research is to study the bond behavior of High Performance reinforcing bars for concrete structures and to evaluate the effect of different parameters believed to affect the bond characteristics. Twenty-two large scale reinforced concrete splice beams were constructed using No. 8 and No. 11 reinforcing bars, having different cross-sections with varying concrete compressive strengths and development lengths. The beams were tested using four point bending setup to provide a constant moment region over the splice zone. Test results indicate that stresses up 90 ksi can be achieved in the No. 8 bars and up to 70 ksi in the No. 11 bars without confinement; however, it is recommended to use transverse reinforcement to confine the High Performance bars in order to ensure ductility. These stresses can be evaluated at failure using a simple proposed equation. Test results were used to extend the current ACI Committee 408 equations to better predict the stresses in the High Performance Steel.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonconventional Concrete Technologies written by Committee on Nonconventional Concrete Technologies for Renewal of the Highway Infrastructure and published by National Academies Press. This book was released on 1997-04-08 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure identifies research and development opportunities in innovative, nonconventional materials and processes that have the potential to accelerate the construction process, improve the durability of highway pavement and bridges, and enhance the serviceability and longevity of new construction under adverse conditions.
Download or read book Fibrous and Composite Materials for Civil Engineering Applications written by R Fangueiro and published by Elsevier. This book was released on 2011-04-19 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles, is an important and interesting development. Fibrous and composite materials for civil engineering applications analyses the types and properties of fibrous textile and structures and their applications in reinforcement and civil engineering. Part one introduces different types of fibrous textiles and structures. Chapters cover the properties of natural and man-made fibres and of yarns, as well as an overview of textile structures. Part two focuses on fibrous material use in concrete reinforcement, with chapters on the properties and applications of steel fibre reinforced concrete, natural fibre reinforced concrete and the role of fibre reinforcement in mitigating shrinkage cracks. In part three, the applications of fibrous material-based composites in civil engineering are covered. Chapters concentrate on production techniques and applications such as reinforcement of internal structures, structural health monitoring and textile materials in architectural membranes. With its distinguished editor and international team of contributors, Fibrous and composite materials for civil engineering applications is a standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field. Explores the development of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles Key topics include short fibre reinforced concrete, natural fibre reinforced concrete and high performance fibre reinforced cementitious composites A standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field
Download or read book ACI Materials Journal written by and published by . This book was released on 1999 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia and Handbook of Materials Parts and Finishes written by Mel Schwartz and published by CRC Press. This book was released on 2016-07-06 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: A great deal of progress has been made in the development of materials, their application to structures, and their adaptation to a variety of systems and integrated across a wide range of industrial applications. This encyclopedia serves the rapidly expanding demand for information on technological developments. In addition to providing information
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Abstracts written by and published by . This book was released on 1998 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1995 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
