Download or read book Body Flow written by Scott Sonnon and published by . This book was released on 2003-05-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Time dependent Method for Calculating Supersonic Blunt body Flow Fields with Sharp Corners and Embedded Shock Waves written by Richard W. Barnwell and published by . This book was released on 1970 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On Hypersonic Blunt Body Flow Fields Obtained with a Time dependent Technique written by John David Anderson (Jr.) and published by . This book was released on 1968 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: New results are presented for inviscid, supersonic and hypersonic blunt-body flow fields obtained with a numerical time-dependent method patterned after that of Moretti and Abbett. In addition, important comments are made with regard to the physical and numerical nature of the method. Specifically, numerical results are presented for two-dimensional and axisymmetric parabolic and cubic blunt bodies as well as blunted wedges and cones; these results are presented for zero degrees angle of attack and for a calorically perfect gas with gamma = 1.4. The numerical results are compared with other existing theoretical and experimental data. Also, the effects of initial conditions and boundary conditions are systematically examined with regard to the convergence of the time-dependent numerical solutions, and the point is made that the initial conditions can not be completely arbitrary. Finally, in order to learn more about the performance of the time-dependent method, a numerical experiment is conducted to examine the unsteady propagation and region of influence of a slight pressure disturbance introduced at a point on the surface of a blunt body.
Download or read book Inviscid Hypersonic Flow Over a Blunt Body with High Rates of Mass and Heat Transfer written by Elmer Dale Martin and published by . This book was released on 1968 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vortical Flows written by Jie-Zhi Wu and published by Springer. This book was released on 2015-06-23 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive and intensive book for graduate students in fluid dynamics as well as scientists, engineers and applied mathematicians. Offering a systematic introduction to the physical theory of vortical flows at graduate level, it considers the theory of vortical flows as a branch of fluid dynamics focusing on shearing process in fluid motion, measured by vorticity. It studies vortical flows according to their natural evolution stages,from being generated to dissipated. As preparation, the first three chapters of the book provide background knowledge for entering vortical flows. The rest of the book deals with vortices and vortical flows, following their natural evolution stages. Of various vortices the primary form is layer-like vortices or shear layers, and secondary but stronger form is axial vortices mainly formed by the rolling up of shear layers. Problems are given at the end of each chapter and Appendix, some for helping understanding the basic theories, and some involving specific applications; but the emphasis of both is always on physical thinking.
Download or read book Mechanics of Fluids written by Uche Oteh and published by AuthorHouse. This book was released on 2008 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow written by Mihaly Csikszent and published by Harper Collins. This book was released on 1991-03-13 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to "flow," a new field of behavioral science that offers life-fulfilling potential, explains its principles and shows how to introduce flow into all aspects of life, avoiding the interferences of disharmony.
Download or read book Understanding Aerodynamics written by Doug McLean and published by John Wiley & Sons. This book was released on 2012-12-26 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much-needed, fresh approach that brings a greater insight into the physical understanding of aerodynamics Based on the author’s decades of industrial experience with Boeing, this book helps students and practicing engineers to gain a greater physical understanding of aerodynamics. Relying on clear physical arguments and examples, Mclean provides a much-needed, fresh approach to this sometimes contentious subject without shying away from addressing "real" aerodynamic situations as opposed to the oversimplified ones frequently used for mathematical convenience. Motivated by the belief that engineering practice is enhanced in the long run by a robust understanding of the basics as well as real cause-and-effect relationships that lie behind the theory, he provides intuitive physical interpretations and explanations, debunking commonly-held misconceptions and misinterpretations, and building upon the contrasts provided by wrong explanations to strengthen understanding of the right ones. Provides a refreshing view of aerodynamics that is based on the author’s decades of industrial experience yet is always tied to basic fundamentals. Provides intuitive physical interpretations and explanations, debunking commonly-held misconceptions and misinterpretations Offers new insights to some familiar topics, for example, what the Biot-Savart law really means and why it causes so much confusion, what “Reynolds number” and “incompressible flow” really mean, and a real physical explanation for how an airfoil produces lift. Addresses "real" aerodynamic situations as opposed to the oversimplified ones frequently used for mathematical convenience, and omits mathematical details whenever the physical understanding can be conveyed without them.
Download or read book Federal Register written by and published by . This book was released on 1973 with total page 1306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coastal Engineering Waves Beaches Wave Structure Interactions written by T. Sawaragi and published by Elsevier. This book was released on 1995-04-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science and technology of coastal and ocean engineering are closely related to harbour and fishery engineering, because they share a common basic knowledge. However, whereas various publications of coastal engineering, harbour engineering, and ocean engineering have described just the knowledge in their own respective fields, an interrelated and systematic presentation linking them together has yet to be attempted. This book is the first attempt to systematically combine the fields of coastal, ocean, harbour, and fishery engineering from an engineering viewpoint backed by hydrodynamics. Understanding the interaction of waves with structures and sediment, and predicting the associated responses of interest, underlie nearly every problem in coastal and ocean engineering. This is precisely the goal of this book. Although primarily intended for use as a special textbook for graduate students and senior practising engineers, it is hoped that this book will also serve as a useful reference and assist in the further development of this field. With these objectives in mind, each chapter deals with important problems to be solved in the near future. The references included in each chapter should aid students and practising engineers in further broadening their knowledge. This book is the English translation of the original Japanese version published in May, 1991, commemorating the author's retirement from Osaka University. ``Elsevier will be named copyright holder of the English translated publication of the Work. This grant by Gihodo Publishers Ltd. (GP) only pertains to the English language version of the Work and no other rights, except to publish the Work in the English language, are granted to Elsevier Science (ES) by GP, which is acknowledged by ES to be the original copyright holder in the Work.''
Download or read book NASA Technical Note written by and published by . This book was released on 1971 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wear written by Gwidon W. Stachowiak and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is emerging from the realm of steam engines and crank-case lubricants and becoming key to vital new technologies such as nanotechnology and MEMS. Wear is an integral part of tribology, and an effective understanding and appreciation of wear is essential in order to achieve the reliable and efficient operation of almost any machine or device. Knowledge in the field has increased considerably over recent years, and continues to expand: this book is intended to stimulate its readers to contribute towards the progress of this fascinating subject that relates to most of the known disciplines in physical science. Wear – Materials, Mechanisms and Practice provides the reader with a unique insight into our current understanding of wear, based on the contributions of numerous internationally acclaimed specialists in the field. Offers a comprehensive review of current knowledge in the field of wear. Discusses latest topics in wear mechanism classification. Includes coverage of a wide variety of materials such as metals, polymers, polymer composites, diamonds, and diamond-like films and ceramics. Discusses the chemo-mechanical linkages that control tribology, providing a more complete treatment of the subject than just the conventional mechanical treatments. Illustrated throughout with carefully compiled diagrams that provide a unique insight into the controlling mechanisms of tribology. The state of the art research on wear and the mechanisms of wear featured will be of interest to post-graduate students and lecturers in engineering, materials science and chemistry. The practical applications discussed will appeal to practitioners across virtually all sectors of engineering and industry including electronic, mechanical and electrical, quality and reliability and design.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Powder and Grains 2001 written by Y. Kishino and published by CRC Press. This book was released on 2020-12-17 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics discussed in this text range from quasi-static problems to dynamic problems, and are divided into 15 groups, such as: cohesion/cracking; wave propagation; and quasi-static behaviour. Each group contains theoretical, experimental and computational approaches by researchers.
Download or read book Architectural Graphic Standards written by American Institute of Architects and published by John Wiley & Sons. This book was released on 2017-03-16 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: ARCHITECTURAL GRAPHIC STANDARDS THE LANDMARK UPDATE OF THE MOST RECOGNIZED STUDENT RESOURCE IN ARCHITECTURE The Student Edition of the iconic Architectural Graphic Standards has been a rite of passage for architecture, building, and engineering students for more than eighty years. Thoughtfully distilled from the Twelfth Edition of Architectural Graphic Standards and reorganized to meet the specific needs of today’s students, this fully updated Student Edition shows you how to take a design idea through the entire planning and documentation process. This potent resource stays with you through your academic experience and into your first years as a professional with thousands of useful illustrations and hundreds of architectural elements conveniently placed at your fingertips. Presented in a format closely resembling an architect’s actual workflow, this Twelfth Edition student handbook features: Completely new material on resiliency in buildings A versatile treatment written for the design studio setting and aligned with the most current curricular trends, including new and updated coverage on topics related to sustainability, digital fabrication, and building information modeling (BIM) A proven pedagogy that saves students time and ensures young professionals avoid the most common pitfalls Develop a state-of-the-art mastery of design best practices with Architectural Graphic Standards, Twelfth Edition, Student Edition.
Download or read book Unsteady Combustor Physics written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2021-10-21 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore a unified treatment of the dynamics of combustor systems, including acoustics, fluid mechanics, and combustion in a single rigorous text. This updated new edition features an expansion of data and experimental material, updates the coverage of flow stability, and enhanced treatment of flame dynamics. Addresses system dynamics of clean energy and propulsion systems used in low emissions systems. Synthesizing the fields of fluid mechanics and combustion into a coherent understanding of the intrinsically unsteady processes in combustors. This is a perfect reference for engineers and researchers in fluid mechanics, combustion, and clean energy.
Download or read book An Investigation of Several NACA 1 series Nose Inlets with and Without Protruding Central Bodies at High subsonic Mach Numbers and at a Mach Number of 1 2 written by Robert E. Pendley and published by . This book was released on 1950 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation of three NACA 1-series nose inlets, two of which were fitted with protruded central bodies, was conducted in the Langley 8-foot high-speed tunnel. An elliptical-nose body, which had a critical Mach number approximately equal to that of one of the nose inlets, was also tested. Tests were made near zero angle of attack for a Mach number range from 0.4 to 0.925 and for the supersonic Mach number of 1.2. The inlet-velocity-ratio range extended from zero to a maximum value of 1.34. Measurements included pressure distribution, external drag, and total-pressure loss of the internal flow near the inlet. Drag was not measured for the tests at the supersonic Mach number.
