Download or read book Blow Molding Design Guide written by Norman C. Lee and published by . This book was released on 2008 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Guide To Injection Blow Molding written by Samuel L. Belcher and published by CRC Press. This book was released on 2007-03-05 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking a straight-forward approach, the Practical Guide to Injection Blow Molding explores the entire industry from conception, design, costing, tooling, and machinery, to trouble-shooting, testing, and daily production. With information for both the novice investor and the plastic industry expert, this concise text is reinforced with pictures, charts, and figures. The author, a highly knowledgeable industry insider, and a member ofThe Plastics Hall of Fame, discusses the history of the industry, as well as its daily workings. He instructs in product and tooling design, as well as material and machine selection, explaining advantages and disadvantages, elaborating on efficiencies that can be realized.
Download or read book Practical Guide to Blow Moulding written by N. C. Lee and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blow moulding is a manufacturing process used to form hollow plastic parts. It evolved from the ancient art of glass blowing and it is used to particular advantage with plastic materials. Celluloid was used first to blow mould baby rattles and novelties in the 1930s, linear low-density polyethylene was used in the 1940s for high production bottles and these days polyethylene terephthalate is used to make anything from soda bottles, to highly sophisticated multilayered containers and automotive fuel tanks in the last decade. When designing a product it is important to consider aspects such as a material's characteristics, the processing methods available, the assembly and finishing procedures, and the life cycle and expected performance of the product. This book presents the basics of blow moulding as well as the latest state-of-the-art and science of the industry. A key feature is the approach of discussing the 'basics' and then taking the reader through the entire process from design development through to final production.
Download or read book Stretch Blow Molding written by Ottmar Brandau and published by William Andrew. This book was released on 2016-08-10 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stretch Blow Molding, Third Edition, provides the latest on the blow molding process used to produce bottles of the strength required for carbonated drinks. In this updated handbook, Ottmar Brandau introduces the technology of stretch blow molding, explores practical aspects of designing and running a production line, and looks at practical issues for quality control and troubleshooting. As an experienced engineer, manager, and consultant, Brandau’s focus is on optimizing the production process, improving quality, and reducing cycle time. In this new edition, the author has thoroughly reviewed the content of the book, providing updates on new developments in stretch blow molding, including neck sizes, new equipment and processes, and the economics of the process. The book is a thoroughly practical handbook which provides engineers and managers with the toolkit to improve production and engineering aspects in their own businesses, allowing them to save money, increase output, and improve competitiveness by adopting new technologies. Provides knowledge and understanding of the latest technological and best practice developments in stretch blow molding Includes money saving, practical strategies to optimize the production process, improve quality, and reduce cycle times Provides a guide to the training of operators, as well as tactics on how to troubleshoot when products are faulty, productivity is low, or machinery is not operating as expected
Download or read book Practical Extrusion Blow Molding written by SamuelL. Belcher and published by Routledge. This book was released on 2017-10-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outline proven methods from planning and manufacture to product testing, this work reports on the most effective means of producing plastics by the extrusion blow moulding process. It supplies data on materials, performance standards and testing methodologies developed in industry with proven reliability and cost effectiveness.
Download or read book Understanding Blow Molding written by Norman C. Lee and published by Hanser Gardner Publications. This book was released on 2007 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines hands-on practical applications, which will benefit those new to the plastic blow molding industry, as well as those who are experienced but may not have been exposed to all facets of a blow molding plant. People from various disciplines such as product and manufacturing engineering, marketing, design, research and development, as well as operation personnel, will also gain insight into solving the everyday problems of a blow molding operation. This revised second edition is expanded by a comprehensive troubleshooting guide that will prove particularly helpful to any practitioner.
Download or read book SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc written by Michael L. Berins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in the United States had reached almost 60 billion pounds annually. Indeed, the story of the U.S. plastics industry always has been one of phenomenal growth and unparalleled innovation. While these factors make compilation of a book such as this difficult, they also make it necessary. Thus I acknowledge all those who worked to gather and relate the information included in this 1991 edition and thank them for the effort it took to make the Plastics Engineering Handbook a definitive source and invaluable tool for our industry. Larry L. Thomas President The Society of the Plastics Industry, Inc.
Download or read book Plastics Institute of America Plastics Engineering Manufacturing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified, practical, and innovative approach to understanding the design and manufacture of plastic products in the World of Plastics. The concise and comprehensive information defines and focuses on past, current, and future technical trends. The handbook reviews over 20,000 different subjects; and contains over 1,000 figures and more than 400 tables. Various plastic materials and their behavior patterns are reviewed. Examples are provided of different plastic products and relating to them critical factors that range from meeting performance requirements in different environments to reducing costs and targeting for zero defects. This book provides the reader with useful pertinent information readily available as summarized in the Table of Contents, List of References and the Index.
Download or read book Bottles Preforms and Closures written by Ottmar Brandau and published by William Andrew. This book was released on 2012-06-19 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few decades, there have been great advances in the phylogenetic classification of infectious diseases of man. Taxonomic Guide to Infectious Diseases organizes this information into a standard biological classification and provides a short, clinically-oriented description of every genus (class) of infectious organism. It covers an overview of modern taxonomy, including a description of the kingdoms of life and the evolutionary principles underlying the class hierarchy, and each following chapter will describe one phylum and the genera that contain infectious species. Taxonomic Guide to Infectious Diseases is written in an engaging, narrative style, providing the reader with an easy to digest yet clinically-oriented story of the pathogenic features of each genus. Designed for researchers, clinicians and students of infectious diseases, medical microbiology and pathology. Offers genus-by-genus classification of infectious diseases along with short, clinically-oriented descriptions of each genusPresents comprehensive lists of infectious species for each genera and identifies diseases caused by each species. Compiled and written by a well-known pathologist with extensive experience in diagnosing human infectious diseases.
Download or read book Plastic Conversion Processes written by Eric Cybulski and published by CRC Press. This book was released on 2009-05-28 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explosion of plastic material development continues to generate a proliferation of conversion processes and variants of these methods. Unfortunately, most books on plastics conversion focus on a single process, such as injection molding, limiting their usefulness to readers without prior knowledge of the field. Few, if any, single-source texts adequately describe and compare each of the plastic conversion processes together. Plastic Conversion Processes: A Concise and Applied Guide addresses that need. It provides a basic overview of each of the seven major conversion processes, which account for the creation of more than 97 percent of all plastics products today. This detailed guide assembles and integrates the wealth of information scattered throughout various literature, to provide a basic yet complete illustration of plastic conversion processes. Learn Methods to Compare, Evaluate, and Select the Best Process for Your Product This book is unique in that it employs an all-encompassing approach, offering more than a mere overview of basic theory and application related to each major process. Chapters begin with a process-attribute table to serve as a quick guide, and then briefly describe a particular conversion process. To ensure comprehensive understanding of each method and how it works, sections include a short history and detailed explanation of the particular equipment, tooling, and materials used, as well as general piece part design guidelines and case studies gleaned from real-life experience. There is a plastic term for every letter of the alphabet, making it one of the most complex fields in science. A "quick reference" section at the end of the book includes an exhaustive collection of more than 350 terms, definitions, acronyms, and a key process characteristics comparison chart. Supplemented with photos, diagrams, and illustrations that bolster understanding of the material, this book characterizes the plastics industry in a way that makes it less intimidating, to help those new to the field fully grasp the entire spectrum of the field. With its uncommon consolidation of information, this volume quickly and effectively brings readers up to speed on plastic conversion processes.
Download or read book Extrusion Blow Molding written by Michael Thielen and published by Hanser Gardner Publications. This book was released on 2001 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bottles, canisters, drums, tanks, and ducts—hollow articles made from plastic are indispensable parts of life in the 21st century! This powerful tool will provide you with an overview of extrusion blow molding technology: from equipment and fundamentals to process details and design guidelines. Problems with your parison? Defects in your parts? Turn to the troubleshooting guide! Pocket-sized and condensed, yet clear and comprehensive! Plastics Power in the Palm of your Hand!
Download or read book Practical Extrusion Blow Molding written by SamuelL. Belcher and published by Routledge. This book was released on 2017-10-06 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outline proven methods from planning and manufacture to product testing, this work reports on the most effective means of producing plastics by the extrusion blow moulding process. It supplies data on materials, performance standards and testing methodologies developed in industry with proven reliability and cost effectiveness.
Download or read book Plastic Blow Molding Handbook written by N.C. Lee and published by Springer. This book was released on 1990-05-31 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the years, numerous handbooks and design guides on the subject of plastics have been published. None of these dealt in any depth with the subject of this handbook-blow molding. The recent growth of blow molding as an economically feasible process has been rapid in many areas. This growth, coupled with the lack of technical publications relating to blow molding, prompted the Board of Directors of the Blow Molding Division of the Society of Plastic Engineers to undertake the assimilation of available information and the editing of this milestone publication. We believe that this Plastic Blow Molding Handbook will provide the reader with a greater understanding of the unique process characteristics of blow molding, enable the reader to apply proven techniques in developing new products and applications for blow molding, and will serve as a valuable reference for all who are interested in the plastics industry. Our thanks are heartily extended to the various authors for their con tributions to this pioneering effort in blow molding. J. H. Moran Chairman Blow Molding Division Society of Plastic Engineers xi Preface The blow molding of plastic articles has in the past had an aura of the mystic around it. As a result, little comprehensive work on the subject has been published. Advances in the technology of polymeric materials, machine controls, computer science, and management techniques have made it nec essary to correct the myths and magic.
Download or read book Blow Molding Handbook written by Dominick V. Rosato and published by . This book was released on 2004 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every successful manufacturer of blow molded products faces the challenge of utilizing advanced techniques which demand an understanding of the different plastic melt flow behaviors, operational monitoring and control systems, testing and quality control, statistical analysis, and so on. However, these techniques are only helpful if the basic operations of molding are understood to ensure the elimination or a significant reduction of potential problems. This second edition of Blow Molding Handbook - an industry standard for more than a decade - provides insight to critical areas such as: product design meeting performance requirements reducing costs zero defect targets The information contained in this volume is of value to even the most experienced fabricators, designers, and engineers; it also provides a firm basis for the beginner. The intent is to provide a complete review of the important aspects of the blow molding process that goes from the practical to the theoretical, and from the elementary to the advanced.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.
Download or read book Plastics Design Handbook written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.
Download or read book Blow Molding Handbook written by Donald V. Rosato and published by Oxford University Press, USA. This book was released on 1989 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blow molding is a rapidly growing technology, and this comprehensive new volume provides a practical aid and reference for those already involved in the process as well as for those who need to take advantage of this low-cost technique. Blow Molding Handbook covers the entire blow molding process, discussing technological, performance, marketing and financial aspects. Unique in the field, this is a dual sourcebook--both a step-by-step guide to design and processing methods and a practical reference filled with trouble-shooting tips, techniques, and advice. Encyclopedic in detail and encompassing the latest technical advancements, the Handbook will benefit design and production professionals, quality control, purchasing and sales specialists, and R & D managers.
