Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. Includes a critical review of the current key fundamental and technical issues of Ti PM. Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys

Download or read book Advances in powder metallurgy written by C. Suryanarayana and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter introduces the novel method of mechanochemical synthesis as an effective method for synthesizing metal powders in the nanocrystalline state. After introducing the basic principles of the process, process parameters that affect the constitution and microstructure of the processed powders are discussed. The mechanisms of alloying and grain refinement are also described. Methods for achieving the smallest possible grain size are highlighted. Current problems associated with the consolidation of powders to bulk shape are described. The ubiquitous problem of powder contamination during milling and solutions to eliminate or minimize this are also emphasized.

Download or read book Powder Metallurgy of Titanium written by Ma Qian and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference upon which this work is based fully achieved its objectives and turned out to be the largest international gathering dedicated solely to the topic of titanium processing via powder metallurgy. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 50 peer-reviewed papers are grouped into 8 chapters: PM titanium alloy design and processing developments; Powder Production; Effect of Impurities; Metal Injection Moulding of Titanium; Biomedical Titanium Alloys; Titanium Composites; Forging and Equal-Channel Angular Pressing of Titanium; Laser Cladding, Welding, Slip Casting and Other Processing Developments.

Download or read book Powder Metallurgy of Titanium Alloys written by American Institute of Mining, Metallurgical, and Petroleum Engineers and published by . This book was released on 1980 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Powder Metallurgy Processing written by Howard Kuhn and published by Elsevier. This book was released on 2012-12-02 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Metallurgy Processing: New Techniques and Analyses covers the application of advanced analytical techniques in metallurgy, mechanics, and economics to the fundamentals of powder fabrication processes. The book discusses powder production by gas and water atomization of liquid metals; the triaxial stress state compaction of powders; and the diffusional homogenization of compacted blends of powders. The text also describes the deformation processing of sintered powder materials; the analysis of mechanical property-structure relations in powder forgings; and the economic risk analysis of a miniplant for production of steel strip from powder. Chemical engineers and metallurgists and students taking related courses will find the book invaluable.

Download or read book Powder Metallurgy Technology written by G. S. Upadhyaya and published by Cambridge Int Science Publishing. This book was released on 1997 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Contents1 INTRODUCTION; 2 METAL POWDER PRODUCTION; 3 METAL POWDER CHARACTERISTICS; 4 METAL POWDER TRE-AMENT; 5 METAL POWDER COMPACT-ION; 6 SINTERING; 7 HOT CONSOLIDATION; 8 SECONDARY TREATMENT; 9 POWDER INJECTION MOULDING; 10 QUALITY CONTROL OF POWDER METALLURGY MATERIALS.

Download or read book Powder Metallurgy written by S. A. Tsukerman and published by Elsevier. This book was released on 2013-10-22 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Metallurgy discusses the production of metal powders and other materials made from it. It defines the meaning of metal powders with some illustrations. The book also identifies the processes similar between the production of metal powder and ceramic products. The technology involved and the variation in the process of metallurgy are covered in some chapters of the book. The book enumerates certain advantages in using powder metallurgy over other processes. Methods such as the reduction of the oxides of metals, electrolysis, thermal dissociation, and chemical disintegration are explained. The origin and improvement made on the method are discussed in detail. The goods created using the process are also explained, as well as the types of metals that are being used. A chapter of the book focuses on the flaws of powder metallurgy. The book will provide useful information to metal smiths, chemists, students, and researchers in the field of chemistry.

Download or read book Powder Metallurgy written by G. Dowson and published by Springer. This book was released on 1990 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy, commonly designated by its initial letters asPM or PM, may be defined as the production of useful artefacts from metal powder without passing through the molten state. This introductory text examines the processes by which these powders are produced, and explores their behaviour in the subsequent consolidation stages.

Download or read book Advances in powder metallurgy written by F.H. Froes and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major reason that there is not more widespread use of titanium and its alloys is the high cost. In this paper, developments in one cost effective approach to fabrication of titanium components – powder metallurgy – is discussed with respect to various aspects of this technology. These aspects are the blended elemental approach, prealloyed techniques, additive layer manufacturing, metal injection molding, spray deposition, far from equilibrium processing (rapid solidification mechanical alloying and vapor deposition) and porous materials. Use of titanium powder for sputtering targets, coating, as a grain refiner in aluminium alloys and fireworks are not addressed.

Download or read book Reactivity of Titanium with Oxygen written by W. A. Riehl and published by . This book was released on 1963 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study was undertaken to develop information on which a knowledgeable decision could be based concerning the use of titanium for construction of thin walled LOX tanks. The primary goals were to investigate the reactions of titanium alloys with oxygen under a variety of conditions associated with space vehicles, and to determine if the titanium could be treated or coated in some fashion to eliminate such hazards.

Download or read book Powder Metallurgy written by P. Ramakrishnan and published by New Age International. This book was released on 2007 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the International Conference on Powder Metallurgy for Automotive and Engineering Industry, held at Mumbai during 3-6 February 2005.

Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques

Download or read book Source Book on Powder Metallurgy written by Samuel Bradbury and published by . This book was released on 1979 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book INFLUENCE OF BLENDED ELEMENTAL ALUMINUM AND TITANIUM ALUMINUM MASTER ALLOY ADDITIONS ON THE SINTERING BEHAVIOUR OF TITANIUM 6 ALUMINUM ALLOY written by Joannie Lapointe and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite their attractive properties Titanium alloys have limited use in automotive applications due to their high cost. Processing low-cost Ti powder sources through a blended elemental or master alloy powder metallurgy route can reduce cost. This work focuses on the study of the effect of blended elemental and master alloyed Aluminum additions on homogeneity and density during sintering of a Ti6Al alloy. Differential scanning calorimetry, dilatometry, and microscopy are used to study the impact of the Al powder source, size and chemical purity. The combined analysis techniques show that the homogenization is faster with fine blended elemental powder reaching the full homogenized stage after 15 minutes. The densification is better with fine TiAl addition, with an axial shrinkage of over 4%, resulting in an overall densification of more than 12%. These results will help to increase the usage of Titanium alloys and the development of new alloys.

Download or read book Processing and Fabrication of Advanced Materials VIII written by K. A. Khor and published by World Scientific. This book was released on 2000 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the technical papers presented at the international symposium entitled OC Processing and Fabrication of Advanced Materials VIIIOCO, held in Singapore in 1999. This was the eighth in a series of symposia bringing together engineers and researchers from industry, academia and national laboratories, working on aspects related to the processing, fabrication and characterization of advanced materials, to present and discuss their latest findings. The proceedings also contain technical papers presented at two special symposia on biomaterials and magnesium technology. Contents: Advanced Metallics; Biomaterials; Advanced Ceramics; Intermetallics; Magnesium Technology; Metal Matrix Composites (MMC); Polymer and Composites; Powder Injection Molding. Readership: Mechanical and production engineers."

Download or read book Advances in Powder Metallurgy Particulate Materials written by and published by . This book was released on 2005 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Powder Metallurgy written by Franz Skaupy and published by . This book was released on 1944 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: