Download or read book Blast Furnace Technology Science and Practice written by Julian Szekely and published by Marcel Dekker. This book was released on 1972 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Iron Blast Furnace written by J. G. Peacey and published by Elsevier. This book was released on 2016-06-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Iron Blast Furnace: Theory and Practice presents theoretical, experimental, and operational evidence about the iron blast furnace as well as a mathematical description of its operation. This book includes a set of equations that accurately describe stoichiometric and enthalpy balances for the process and which are consistent with observed temperatures and compositions in the furnace stack. These equations, which have been devised on the basis of the Rist approach, show the effects of altering any blast-furnace variable on the other operating requirements of the process. This monograph is comprised of 14 chapters and begins with a brief description of the blast-furnace process. The next chapter takes a look inside the furnace, paying particular attention to its behavior in front of the tuyères and the kinetics of the coke gasification reaction. The reader is then introduced to the thermodynamics and stoichiometry of the blast-furnace process; enthalpy balance for the bottom segment of the furnace; the effects of tuyères injectants on blast-furnace operations; and blast-furnace optimization by linear programming. A number of important variables covered by the equations are discussed, including hydrocarbon injection at the tuyères, oxygen enrichment of the blast, moisture, limestone decomposition, coke reactivity, and metalloid reduction. The effects of many of these variables are illustrated numerically in the text while others are demonstrated in sets of problems that follow each chapter. This text will be a valuable resource for metallurgists and materials scientists.
Download or read book Blast Furnace Technology Science and Practice written by Julian Szekely and published by . This book was released on with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Furnace Ironmaking written by Ian Cameron and published by Elsevier. This book was released on 2019-10-22 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blast Furnace Ironmaking: Analysis, Control, and Optimization uses a fundamental first principles approach to prepare a blast furnace mass and energy balance in ExcelTM. Robust descriptions of the main equipment and systems, process technologies, and best practices used in a modern blast furnace plant are detailed. Optimization tools are provided to help the reader find the best blast furnace fuel mix and related costs, maximize output, or evaluate other operational strategies using the ExcelTM model that the reader will develop. The first principles blast furnace ExcelTM model allows for more comprehensive process assessments than the 'rules of thumb' currently used by the industry. This book is suitable for undergraduate and postgraduate science and engineering students in the fields of chemical, mechanical, metallurgical and materials engineering. Additionally, steel company engineers, process technologists, and management will find this book useful with its fundamental approach, best practices description, and perspective on the future. - Provides sample problems, answers and assignments for each chapter - Explores how to optimize the blast furnace operation while maintaining required temperatures and gas flowrates - Describes all major blast furnace equipment and best practices - Features blast furnace operating data from five continents
Download or read book Modern Blast Furnace Ironmaking written by Maarten Geerdes and published by IOS Press. This book was released on 2009 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This publication was and can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management. The latter will benefit to solve operational problems and process optimization issues." --Book Jacket.
Download or read book The Operation of Contemporary Blast Furnaces written by Yuncai Liu and published by Springer Nature. This book was released on 2020-09-15 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on how to keep blast furnaces running stably and smoothly with low consumption and long operating life spans. Assessing and adjusting blast furnace performance are key to operation. The book describes in detail cases of both successful and failed blast furnace operation. It also demonstrates various phenomena and “symptoms” in the smelting process that have rarely been studied before, e.g. abnormal gas distribution, bending loss of tuyere, slag crust fall-off, blast furnace thickening, and hearth accumulation. As such, it will help readers understand internal phenomena in blast furnaces, providing a basis for developing intelligent control and management systems.
Download or read book Science Technology and Development written by and published by . This book was released on 1962 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology for Development written by and published by . This book was released on 1962 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by IOS Press. This book was released on 2020-11-04 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Blast Furnace Ironmaking – An Introduction (Fourth Edition, 2020) describes the principles of the blast furnace process. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background of the blast furnace process is clarified. The book focuses on the control of the process with respect to thermal control, gas flow control and casthouse operation. In this book, all essential process details are described and a special focus is on cost optimization by low coke rates and on management of the process in case of disturbances and upsets. The optimization of the blast furnace is not only based on “best practice transfer”, but also requires conceptual understanding why a measure works in some cases and not in other cases. In other words, operational improvement is not only based on know–how, but as well on know–why. This publication can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management.
Download or read book Chemistry Physics of Carbon written by Walker and published by CRC Press. This book was released on 1975-09-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and critical overview of carbon materials in terms of molecular structure, intermolecular relationships, bulk and surface properties, and their behavior in current and emerging applications. It also presents advances in carbon research and development.
Download or read book Information Sources in Metallic Materials written by M. N. Patten and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-07-24 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of each volume of this series Guides to Information Sources is to reduce the time which needs to be spent on patient searching and to recommend the best starting point and sources most likely to yield the desired information. The criteria for selection provide a way into a subject to those new to the field and assists in identifying major new or possibly unexplored sources to those who already have some acquaintance with it. The series attempts to achieve evaluation through a careful selection of sources and through the comments provided on those sources.
Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by IOS Press. This book was released on 2015-04-07 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the blast furnace process for operators. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background is clarified. Operational observations, challenges and remedies are explained from this perspective. Optimization of the blast furnace process is not only based on “best practice transfer”, but also requires conceptual understanding of what works when. In other words: operational improvement is not only based on know–how, but on know–why as well. With Modern Blast Furnace Ironmaking – An Introduction (Third Edition, 2015) the reader has a compact compendium of the blast furnace process available: by operators and for operators and for those who are preparing to become operators.
Download or read book Kinetics of Metallurgical Processes written by Hem Shanker Ray and published by Springer. This book was released on 2018-08-20 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a text for upper undergraduate and graduate courses on kinetics of metallurgical processes for students of materials science, metallurgical engineering, and chemical engineering. Focusing on basic and essential topics, selected from the authors’ teaching and research, it serves as a comprehensive guide to metallurgical kinetics. Chapters 1–10 discuss the “logic” of various kinetics processes, while Chapter 11 explores the systematic analysis of raw rate data generated from controlled experiments. The final chapters illustrate how the fundamental concept of thermal activation is used to describe the kinetics of rate-dependent plastic deformation and creep fracture. With numerous examples, illustrations, and step-by-step tutorials, it is ideally suited for both self-study and classroom use. The examples were selected from research papers to highlight how the topics discussed can be, and are, used to solve real-world technological problems. Providing a comprehensive list of resources for further study, and end-of-chapter review questions to help students test their knowledge, it can be used for university coursework or as a text for professional development courses.
Download or read book High Temperature Vapors written by John Hastie and published by Academic Press. This book was released on 2012-12-02 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Vapors: Science and Technology focuses on the relationship of the basic science of high-temperature vapors to some areas of discernible practical importance in modern science and technology. The major high-temperature problem areas selected for discussion include chemical vapor transport and deposition; the vapor phase aspects of corrosion, combustion, and energy systems; and extraterrestrial high-temperature species. This book is comprised of seven chapters and begins with an introduction to the nature of the high-temperature vapor state, the scope and literature of high-temperature vapor-phase chemistry, and the role of high-temperature vapors in materials science. The discussion then turns to gas-solid reactions with vapor products; chemical vapor transport and deposition; vapor-phase aspects of corrosion at high temperature; and flames and combustion. High-temperature vapor-phase processes associated with gas turbine systems are also considered. The final chapter is devoted to the chemistry of high-temperature species in space. This monograph should serve as a valuable reference for undergraduate and graduate students, as well as scientists in fields such as chemistry, physics, materials science, and metallurgy.
Download or read book Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2016-09-02 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.
Download or read book Control 84 written by John Arthur Herbst and published by . This book was released on 1984 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of the Imperial Institute written by Imperial Institute (Great Britain) and published by . This book was released on 1926 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt:
