Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 2007-12-21 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
Download or read book Coal Waste Impoundments written by National Research Council and published by National Academies Press. This book was released on 2002-01-07 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 11, 2000, a breakthrough of Martin County Coal Corporation's coal waste impoundment released 250 million gallons of slurry in near Inez, Kentucky. The 72-acre surface impoundment for coal processing waste materials broke through into a nearby underground coal mine. Although the spill caused no loss of human life, environmental damage was significant, and local water supplies were disrupted. This incident prompted Congress to request the National Research Council to examine ways to reduce the potential for similar accidents in the future. This book covers the engineering practices and standards for coal waste impoundments and ways to evaluate, improve, and monitor them; the accuracy of mine maps and ways to improve surveying and mapping of mines; and alternative technologies for coal slurry disposal and utilization. The book contains advice for multiple audiences, including the Mine Safety and Health Administration, the Office of Surface Mining, and other federal agencies; state and local policymakers and regulators; the coal industry and its consultants; and scientists and engineers.
Download or read book Use of Waste Materials in Hot mix Asphalt written by H. Fred Waller and published by ASTM International. This book was released on 1993 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: In light of requirements that rubber be mixed with any asphalt used in projects receiving federal aid beginning in 1994, and the general increase in the problem of what to do with waste material, 17 papers from a December 1992 symposium in Miami discuss some of the technical and economic considerati
Download or read book The Coal Handbook Towards Cleaner Production written by Dave Osborne and published by Elsevier. This book was released on 2013-10-31 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal is an important fossil fuel resource for many nations due to its large remaining resources, relatively low production and processing cost and potential high energy intensity. Certain issues surround its utilisation, however, including emissions of pollutants and growing concern about climate change. The coal handbook: Towards cleaner production Volume 1 reviews the coal production supply chain from analysis to extraction and distribution.Part one explores coal characterisation and introduces the industrial use of coal as well as coal formation, petrography, reserves, sampling and analysis. Part two moves on to review coal extraction and preparation. Chapters highlight advances in coal mining technology, underground coal gas extraction, coal sizing, comminution and cleaning, and solid-liquid separation technologies for coal. Further chapters focus on economic factors affecting coal preparation, post-treatment of coal, coal tailings treatment, and the optimisation, simulation and control of coal preparation plants. Finally, part three considers aspects of the coal supply chain including the management approach and individual functions such as coal blending and homogenisation, transportation and handling along the entire supply chain.With its distinguished editor and international team of expert contributors, The coal handbook Volumes 1 and 2 is a comprehensive and invaluable resource for professionals in the coal mining, preparation, and utilisation industry, those in the power sector, including plant operators and engineers, and researchers and academics interested in this field. - Reviews the coal production supply chain from analysis to extraction and distribution - Explores coal characterisation, formation, petrography, reserves, sampling and analysis - Examines coal extraction and preparation and highlights advances in coal mining technology, underground coal gas extraction, coal sizing, comminution and cleaning, and solid-liquid separation technologies
Download or read book The Coal Handbook Towards Cleaner Production written by Dave Osborne and published by Elsevier. This book was released on 2013-10-31 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal remains an important fossil fuel resource for many nations due to its large remaining resources, relatively low production and processing cost and potential high energy intensity. Certain issues surround its utilisation, however, including emissions of pollutants and growing concern about climate change. The coal handbook: Towards cleaner production Volume 2 explores global coal use in industry.Part one is an introductory section which reviews the social and economic value of coal, emissions from coal utilisation, the handling, impact and utilisation of coal waste, and an exploration of emerging and future issues around industrial coal utilization. Chapters in part two highlight coal resources, production and use in established markets as well as the emerging markets of Brazil, the Russian Federation, India, Indonesia, and China. Part three focuses specifically on coal utilisation in industry. Chapters consider thermal coal utilisation, coal use in iron and steel metallurgy, advances in pulverised fuel technology, and the evaluation of coal for thermal and metallurgical applications. Further chapters explore coal utilisation in the cement and concrete industries, coal gasification and conversion, and value-in-use assessment for thermal and metallurgical coal. A final chapter summarises the anticipated future pathway towards sustainable, long-term coal use, suggesting transitions that will be needed to ensure cleaner utilisation for many decades to come.With its distinguished editor and international team of expert contributors, The coal handbook Volumes 1 and 2 is a comprehensive and invaluable resource for professionals in the coal mining, preparation, and utilisation industry, those in the power sector, including plant operators and engineers, and researchers and academics interested in this field. - Reviews the social and economic value of coal, emissions from coal utilisation, and the handling, impact and utilisation of coal waste - Explores emerging and future issues around industrial coal utilization - Highlights coal resources, production and use in established markets, as well as emerging markets such as Brazil, the Russian Federation, India, Indonesia, and China
Download or read book AASHTO Guide for Design of Pavement Structures 1993 written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
Download or read book Coal Refuse Inspection Manual written by United States. Mining Enforcement and Safety Administration and published by . This book was released on 1976 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 1977 ERDA authorization fossil fuels written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Research, Development, and Demonstration (Fossil Fuels) and published by . This book was released on 1976 with total page 3192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Pavement Design and Management written by Robert L. Lytton and published by Transportation Research Board National Research. This book was released on 1975 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Information Circular written by and published by . This book was released on with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. - Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies - Reviews the current status and future developments of key technologies involved in IGCC plants - Provides several case studies of existing IGCC plants around the world
Download or read book Economic Evaluation of a Method to Regenerate Waste Chromic Acid sulfuric Acid Etchants written by Deborah A. Spotts and published by . This book was released on 1983 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Total Transition written by Sandeep Pai and published by Rocky Mountain Books Ltd. This book was released on 2018-10-23 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Follow the journey of a Canadian and Indian couple, Savannah and Sandeep, as they travel the world to capture the human side of one of the biggest energy transitions of our times - the global shift from fossil fuels to renewables. In this exciting and provocative new book, readers are taken into the homes of the coal miners who live and work in Jharia, a town in India that has been on fire for the past 100 years due to poor coal mining practices. Life in Jharia is a version of Dante's inferno - 700,000 people live in the most unimaginable conditions. Yet even though residents of Jharia say they are dying slowly every day, they also say they'll never leave. Almost 11,000 kilometres away, in the Canadian oil sands, workers and indigenous people similarly describe their complex relationship with the industry that employs them. Although fossil fuel extraction is harming the environment and impacting people's way of life in the oil sands region, a much-needed shift to renewable energy could also leave communities without their livelihoods. Written in the form of a travelogue, Total Transition provides a whirlwind look at the global growth of renewable energy - highlighting exciting developments in solar and wind energy in Canada, India, Africa and Europe, and discussing hurdles standing in the way of a total transition. Energy experts and leaders of innovative renewable energy projects share hope and optimism about the future of fossil fuel workers and their communities in an increasingly renewable world.
Download or read book Coal Remining Best Management Practices Guidance Manual written by and published by . This book was released on 2000 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuels and Fuel Technology written by Wilfrid Francis and published by Elsevier. This book was released on 2016-01-22 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuels and Fuel Technology, Volume One: A Summarized Manual provides information pertinent to the fundamental aspects of fuels and fuel technology. This book presents a reasonably accurate summary of the existing knowledge and literature relating to fuel technology. Organized into two sections encompassing 72 data sheets, this volume begins with an overview of fuels as organic combustible substances used mainly or solely for the production of useful heat that are divided into three classes, namely, solid, liquid, and gaseous fuels. This text then examines the main chemical components of wood. This book discusses as well the commercial production of peat. The final section deals with the calculations of theoretical and actual air requirements, dry and wet flue gases, and carbon dioxide in flue gases. This book is a valuable resource for chemists and fuel technologists. Students who are interested to obtain a qualification in the subject of fuels or fuel technology will also find this book useful.
Download or read book Decisions written by United States. Federal Mine Safety and Health Review Commission and published by . This book was released on 1996 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 1977 ERDA Authorization Fossil Fuels written by Fusion Advisory Panel (U.S.) and published by . This book was released on 1976 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
