Download or read book Feedstock and Conversion Supply System Design and Analysis written by and published by . This book was released on 2014 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The success of the earlier logistic pathway designs (Biochemical and Thermochemical) from a feedstock perspective was that it demonstrated that through proper equipment selection and best management practices, conventional supply systems (referred to in this report as "conventional designs," or specifically the 2012 Conventional Design) can be successfully implemented to address dry matter loss, quality issues, and enable feedstock cost reductions that help to reduce feedstock risk of variable supply and quality and enable industry to commercialize biomass feedstock supply chains. The caveat of this success is that conventional designs depend on high density, low-cost biomass with no disruption from incremental weather. In this respect, the success of conventional designs is tied to specific, highly productive regions such as the southeastern U.S. which has traditionally supported numerous pulp and paper industries or the Midwest U.S for corn stover.
Download or read book Biomass Feedstock and Conversion Supply System Design and Analysis written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Idaho National Laboratory (INL) supports the U.S. Department of Energy's bioenergy research program. As part of the research program INL investigates the feedstock logistics economics and sustainability of these fuels. A series of reports were published between 2000 and 2013 to demonstrate the feedstock logistics cost. Those reports were tailored to specific feedstock and conversion process. Although those reports are different in terms of conversion, some of the process in the feedstock logistic are same for each conversion process. As a result, each report has similar information. A single report can be designed that could bring all commonality occurred in the feedstock logistics process while discussing the feedstock logistics cost for different conversion process. Therefore, this report is designed in such a way that it can capture different feedstock logistics cost while eliminating the need of writing a conversion specific design report. Previous work established the current costs based on conventional equipment and processes. The 2012 programmatic target was to demonstrate a delivered biomass logistics cost of $55/dry ton for woody biomass delivered to fast pyrolysis conversion facility. The goal was achieved by applying field and process demonstration unit-scale data from harvest, collection, storage, preprocessing, handling, and transportation operations into INL's biomass logistics model. The goal of the 2017 Design Case is to enable expansion of biofuels production beyond highly productive resource areas by breaking the reliance of cost-competitive biofuel production on a single, low-cost feedstock. The 2017 programmatic target is to supply feedstock to the conversion facility that meets the in-feed conversion process quality specifications at a total logistics cost of $80/dry T. The $80/dry T. target encompasses total delivered feedstock cost, including both grower payment and logistics costs, while meeting all conversion in-feed quality targets. The 2012 $55/dry T. programmatic target included only logistics costs with a limited focus on biomass quantity, quality and did not include a grower payment. The 2017 Design Case explores two approaches to addressing the logistics challenge: one is an agronomic solution based on blending and integrated landscape management and the second is a logistics solution based on distributed biomass preprocessing depots. The concept behind blended feedstocks and integrated landscape management is to gain access to more regional feedstock at lower access fees (i.e., grower payment) and to reduce preprocessing costs by blending high quality feedstocks with marginal quality feedstocks. Blending has been used in the grain industry for a long time; however, the concept of blended feedstocks in the biofuel industry is a relatively new concept. The blended feedstock strategy relies on the availability of multiple feedstock sources that are blended using a least-cost formulation within an economical supply radius, which, in turn, decreases the grower payment by reducing the amount of any single biomass. This report will introduce the concepts of blending and integrated landscape management and justify their importance in meeting the 2017 programmatic goals.
Download or read book Advancements in Biomass Feedstock Preprocessing Conversion Ready Feedstocks written by J. Richard Hess and published by Frontiers Media SA. This book was released on 2020-03-12 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The success of lignocellulosic biofuels and biochemical industries depends upon an economic and reliable supply of quality biomass. However, research and development efforts have historically focused on the utilization of agriculturally-derived, cellulosic feedstocks without consideration of their low energy density, high variations in physical and chemical characteristics and potential supply risks in terms of availability and affordability. This Research Topic will explore strategies that enable supply chain improvements in biomass quality and consistency through blending, preprocessing, diversity and landscape design for development of conversion-ready, lignocellulosic feedstocks for production of biofuels and bio-products. Biomass variability has proven a formidable challenge to the emerging biorefining industry, impeding continuous operation and reducing yields required for economical production of lignocellulosic biofuels at scale. Conventional supply systems lack the preprocessing capabilities necessary to ensure consistent biomass feedstocks with physical and chemical properties that are compatible with supply chain operations and conversion processes. Direct coupling of conventional feedstock supply systems with sophisticated conversion systems has reduced the operability of biorefining processes to less than 50%. As the bioeconomy grows, the inherent variability of biomass resources cannot be managed by passive means alone. As such, there is a need to fully recognize the magnitude of biomass variability and uncertainty, as well as the cost of failing to design feedstock supply systems that can mitigate biomass variability and uncertainty. A paradigm shift is needed, from biorefinery designs using raw, single-resource biomass, to advanced feedstock supply systems that harness diverse biomass resources to enable supply chain resilience and development of conversion-ready feedstocks. Blending and preprocessing (e.g., drying, sorting, sizing, fractionation, leaching, densification, etc.) can mitigate variable quality and performance in diverse resources when integrated with downstream conversion systems. Decoupling feedstock supply from biorefining provides an opportunity to manage supply risks and incorporate value-added upgrading to develop feedstocks with improved convertibility and/ or market fungibility. Conversion-ready feedstocks have undergone the required preprocessing to ensure compatibility with conversion and utilization prior to delivery at the biorefinery and represent lignocellulosic biomass with physical and chemical properties that are tailored to meet the requirements of industrially-relevant handling and conversion systems.
Download or read book Biomass Supply Chains for Bioenergy and Biorefining written by Jens Bo Holm-Nielsen and published by Woodhead Publishing. This book was released on 2016-02-23 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass Supply Chains for Bioenergy and Biorefining highlights the emergence of energy generation through the use of biomass and the ways it is becoming more widely used. The supply chains that produce the feedstocks, harvest, transport, store, and prepare them for combustion or refinement into other forms of fuel are long and complex, often differing from feedstock to feedstock. Biomass Supply Chains for Bioenergy and Biorefining considers every aspect of these supply chains, including their design, management, socioeconomic, and environmental impacts. The first part of the book introduces supply chains, biomass feedstocks, and their analysis, while the second part looks at the harvesting, handling, storage, and transportation of biomass. The third part studies the modeling of supply chains and their management, with the final section discussing, in minute detail, the supply chains involved in the production and usage of individual feedstocks, such as wood and sugar starches, oil crops, industrial biomass wastes, and municipal sewage stocks. Focuses on the complex supply chains of the various potential feedstocks for biomass energy generation Studies a wide range of biomass feedstocks, including woody energy crops, sugar and starch crops, lignocellulosic crops, oil crops, grass crops, algae, and biomass waste Reviews the modeling and optimization, standards, quality control and traceability, socioeconomic, and environmental impacts of supply chains
Download or read book Biomass to Biofuel Supply Chain Design and Planning under Uncertainty written by Mir Saman Pishvaee and published by Academic Press. This book was released on 2020-11-25 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass to Biofuel Supply Chain Design and Planning under Uncertainty: Concepts and Quantitative Methods explores the design and optimization of biomass-to-biofuel supply chains for commercial-scale implementation of biofuel projects by considering the problems and challenges encountered in real supply chains. By offering a fresh approach and discussing a wide range of quantitative methods, the book enables researchers and practitioners to develop hybrid methods that integrate the advantages and features of two or more methods in one decision-making framework for the efficient optimization of biofuel supply chains, especially for complex supply chain models. Combining supply chain management and modeling techniques in a single volume, the book is beneficial for graduate students who no longer need to consult subject-specific books alongside mathematical modeling textbooks. The book consists of two main parts. The first part describes the key components of biofuel supply chains, including biomass production, harvesting, collection, storage, preprocessing, conversion, transportation, and distribution. It also provides a comprehensive review of the concepts, problems, and opportunities associated with biofuel supply chains, such as types and properties of the feedstocks and fuel products, decision-making levels, sustainability concepts, uncertainty analysis and risk management, as well as integration of biomass supply chain with other supply chains. The second part focuses on modeling and optimization of biomass-to-biofuel supply chains under uncertainty, using different quantitative methods to determine optimal design. Proposes a general multi-level framework for the optimal design and operation of biomass-to-biofuel supply chains through quantitative analysis and modeling, including different biomass and waste biomass feedstock, production pathways, technology options, transportation modes, and final products Explores how modeling and optimization tools can be utilized to address sustainability issues in biofuel supply chains by simultaneously assessing and identifying sustainable solutions Presents several case studies with different regional constraints to evaluate the practical applicability of different optimization methods and compares their performance in real-world situations Includes General Algebraic Modeling System (GAMS) codes for solving biomass supply chain optimization problems discussed in different chapters
Download or read book Feedstock Supply System Design and Economics for Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy promotes the production of a range of liquid fuels and fuel blendstocks from lignocellulosic biomass feedstocks by funding fundamental and applied research that advances the state of technology in biomass collection, conversion, and sustainability. As part of its involvement in this program, the Idaho National Laboratory (INL) investigates the feedstock logistics economics and sustainability of these fuels. Between 2000 and 2012, INL conducted a campaign to quantify the economics and sustainability of moving biomass from standing in the field or stand to the throat of the biomass conversion process. The goal of this program was to establish the current costs based on conventional equipment and processes, design improvements to the current system, and to mark annual improvements based on higher efficiencies or better designs. The 2012 programmatic target was to demonstrate a delivered biomass logistics cost of $35/dry ton. This goal was successfully achieved in 2012 by implementing field and process demonstration unit-scale data from harvest, collection, storage, preprocessing, handling, and transportation operations into INL's biomass logistics model. Looking forward to 2017, the programmatic target is to supply biomass to the conversion facilities at a total cost of $80/dry ton and on specification with in-feed requirements. The goal of the 2017 Design Case is to enable expansion of biofuels production beyond highly productive resource areas by breaking the reliance of cost-competitive biofuel production on a single, abundant, low-cost feedstock. If this goal is not achieved, biofuel plants are destined to be small and/or clustered in select regions of the country that have a lock on low-cost feedstock. To put the 2017 cost target into perspective of past accomplishments of the cellulosic ethanol pathway, the $80 target encompasses total delivered feedstock cost, including both grower payment and logistics costs, while meeting all conversion in-feed quality targets. The 2012 $35 programmatic target included only logistics costs with a limited focus on biomass quality.
Download or read book Process Design Strategies for Biomass Conversion Systems written by Denny K. S. Ng and published by John Wiley & Sons. This book was released on 2016-01-19 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent developments in process systems engineering (PSE) for efficient resource use in biomass conversion systems. It provides an overview of process development in biomass conversion systems with focus on biorefineries involving the production and coproduction of fuels, heating, cooling, and chemicals. The scope includes grassroots and retrofitting applications. In order to reach high levels of processing efficiency, it also covers techniques and applications of natural-resource (mass and energy) conservation. Technical, economic, environmental, and social aspects of biorefineries are discussed and reconciled. The assessment scales vary from unit- to process- and life-cycle or supply chain levels. The chapters are written by leading experts from around the world, and present an integrated set of contributions. Providing a comprehensive, multi-dimensional analysis of various aspects of bioenergy systems, the book is suitable for both academic researchers and energy professionals in industry.
Download or read book Process Design Strategies for Biomass Conversion Systems written by Denny K. S. Ng and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent developments in process systems engineering (PSE) for efficient resource use in biomass conversion systems. It provides an overview of process development in biomass conversion systems with focus on biorefineries involving the production and coproduction of fuels, heating, cooling, and chemicals. The scope includes grassroots and retrofitting applications. In order to reach high levels of processing efficiency, it also covers techniques and applications of natural-resource (mass and energy) conservation. Technical, economic, environmental, and social aspects of biorefineries are discussed and reconciled. The assessment scales vary from unit- to process- and life-cycle or supply chain levels. The chapters are written by leading experts from around the world, and present an integrated set of contributions. Providing a comprehensive, multi-dimensional analysis of various aspects of bioenergy systems, the book is suitable for both academic researchers and energy professionals in industry.
Download or read book Research and evaluation of biomass resources conversion utilization systems market experimental analysis for development data base for a fuels from biomass model written by Gilbert Associates and published by . This book was released on 1979 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass for Renewable Energy Fuels and Chemicals written by Donald L. Klass and published by Elsevier. This book was released on 1998-07-06 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass for Renewable Energy, Fuels, and Chemicals serves as a comprehensive introduction to the subject for the student and educator, and is useful for researchers who are interested in the technical details of biomass energy production. The coverage and discussion are multidisciplinary, reflecting the many scientific and engineering disciplines involved. The book will appeal to a broad range of energy professionals and specialists, farmers and foresters who are searching for methods of selecting, growing, and converting energy crops, entrepreneurs who are commercializing biomass energy projects, and those involved in designing solid and liquid waste disposal-energy recovery systems. Presents a graduated treatment from basic principles to the details of specific technologies Includes a critical analysis of many biomass energy research and commercialization activities Proposes several new technical approaches to improve efficiencies, net energy production, and economics Reviews failed projects, as well as successes, and methods for overcoming barriers to commercialization Written by a leader in the field with 40 years of educational, research, and commercialization experience
Download or read book Model Based Biomass System Design of Feedstock Supply Systems for Bioenergy Production written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering feedstock supply systems that deliver affordable, high-quality biomass remains a challenge for the emerging bioenergy industry. Cellulosic biomass is geographically distributed and has diverse physical and chemical properties. Because of this feedstock supply systems that deliver cellulosic biomass resources to biorefineries require integration of a broad set of engineered unit operations. These unit operations include harvest and collection, storage, preprocessing, and transportation processes. Design decisions for each feedstock supply system unit operation impact the engineering design and performance of the other system elements. These interdependencies are further complicated by spatial and temporal variances such as climate conditions and biomass characteristics. This paper develops an integrated model that couples a SQL-based data management engine and systems dynamics models to design and evaluate biomass feedstock supply systems. The integrated model, called the Biomass Logistics Model (BLM), includes a suite of databases that provide 1) engineering performance data for hundreds of equipment systems, 2) spatially explicit labor cost datasets, and 3) local tax and regulation data. The BLM analytic engine is built in the systems dynamics software package PowersimTM. The BLM is designed to work with thermochemical and biochemical based biofuel conversion platforms and accommodates a range of cellulosic biomass types (i.e., herbaceous residues, short- rotation woody and herbaceous energy crops, woody residues, algae, etc.). The BLM simulates the flow of biomass through the entire supply chain, tracking changes in feedstock characteristics (i.e., moisture content, dry matter, ash content, and dry bulk density) as influenced by the various operations in the supply chain. By accounting for all of the equipment that comes into contact with biomass from the point of harvest to the throat of the conversion facility and the change in characteristics, the BLM evaluates economic performance of the engineered system, as well as determining energy consumption and green house gas performance of the design. This paper presents a BLM case study delivering corn stover to produce cellulosic ethanol. The case study utilizes the BLM to model the performance of several feedstock supply system designs. The case study also explores the impact of temporal variations in climate conditions to test the sensitivity of the engineering designs. Results from the case study show that under certain conditions corn stover can be delivered to the cellulosic ethanol biorefinery for $35/dry ton.
Download or read book Biomass Densification written by Jaya Shankar Tumuluru and published by Springer Nature. This book was released on 2021-01-26 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph discusses the various biomass feedstocks currently available for biofuels production, and mechanical preprocessing technologies to reduce the feedstock variability for biofuels applications. Variability in the properties of biomass—in terms of moisture, particle size distribution, and low-density—results in storage, transportation, handling, and feeding issues. Currently, biorefineries face serious particle bridging issues, uneven discharge, jamming of equipment, and transportation problems. These issues must be solved in order for smooth operations to be possible. Mechanical preprocessing technologies, such as size reduction, densification, and moisture management using drying and dewatering, can help to overcome these issues. Many densification systems exist that will assist in converting low-density biomass to a high-density commodity type feedstock. In 6 chapters, the impact of densification process variables, such as temperature, pressure, moisture, etc., on biomass particle agglomeration, the quality of the densified products, and the overall energy consumption of the process are discussed, as are the various compression models for powders that can be used for biomass particles agglomeration behavior and optimization of the densification process using statistical and evolutionary methods. The suitability of these densified products for biochemical and thermochemical conversion pathways is also discussed, as well as the various international standards (CEN and ISO) they must adhere to. The author has worked on biomass preprocessing at Idaho National Laboratory for the last ten years. He is the principal investigator for the U.S. Department of Energy Bioenergy Technologies Office-funded “Biomass Size Reduction and Densification” project. He has developed preprocessing technologies to reduce cost and improve quality. The author has published many papers and books focused on biomass preprocessing and pretreatments. Biomass process engineers and biorefinery managers can benefit from this book. Students in chemical, mechanical, biological, and environmental engineering can also use the book to understand preprocessing technologies, which greatly assist in improving the biomass critical material attributes. The book can help policymakers and energy systems planners to understand the biomass properties limitations and technologies to overcome the same.
Download or read book Feedstock Supply System Design and Economics for Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels Conversion Pathway written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy promotes the production of liquid fuels from lignocellulosic biomass feedstocks by funding fundamental and applied research that advances the state of technology in biomass sustainable supply, logistics, conversion, and overall system sustainability. As part of its involvement in this program, Idaho National Laboratory (INL) investigates the feedstock logistics economics and sustainability of these fuels. Between 2000 and 2012, INL quantified and the economics and sustainability of moving biomass from the field or stand to the throat of the conversion process using conventional equipment and processes. All previous work to 2012 was designed to improve the efficiency and decrease costs under conventional supply systems. The 2012 programmatic target was to demonstrate a biomass logistics cost of $55/dry Ton for woody biomass delivered to fast pyrolysis conversion facility. The goal was achieved by applying field and process demonstration unit-scale data from harvest, collection, storage, preprocessing, handling, and transportation operations into INL's biomass logistics model.
Download or read book CBTL Design Case Summary Conventional Feedstock Supply System Woody written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A conventional woody feedstock design has been developed that represents supply system technologies, costs, and logistics that are achievable today for supplying woody biomass as a blendstock with coal for energy production. Efforts are made to identify bottlenecks and optimize the efficiency and capacities of this supply system, within the constraints and consideration of existing local feedstock supplies, equipment, and permitting requirements. The feedstock supply system logistics operations encompass all of the activities necessary to move woody biomass from the production location to the conversion reactor ready for blending and insertion. This supply system includes operations that are currently available such that costs and logistics are reasonable and reliable. The system modeled for this research project includes the use of the slash stream since it is a more conservative analysis and represents the material actually used in the experimental part of the project.
Download or read book Integration of Feedstock Assembly System and Cellulosic Ethanol Conversion Models to Analyze Bioenergy System Performance written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Research barriers continue to exist in all phases of the emerging cellulosic ethanol biorefining industry. These barriers include the identification and development of a sustainable and abundant biomass feedstock, the assembly of viable assembly systems formatting the feedstock and moving it from the field (e.g., the forest) to the biorefinery, and improving conversion technologies. Each of these phases of cellulosic ethanol production are fundamentally connected, but computational tools used to support and inform analysis within each phase remain largely disparate. This paper discusses the integration of a feedstock assembly system modeling toolkit and an Aspen Plus® conversion process model. Many important biomass feedstock characteristics, such as composition, moisture, particle size and distribution, ash content, etc. are impacted and most effectively managed within the assembly system, but generally come at an economic cost. This integration of the assembly system and the conversion process modeling tools will facilitate a seamless investigation of the assembly system conversion process interface. Through the integrated framework, the user can design the assembly system for a particular biorefinery by specifying location, feedstock, equipment, and unit operation specifications. The assembly system modeling toolkit then provides economic valuation, and detailed biomass feedstock composition and formatting information. This data is seamlessly and dynamically used to run the Aspen Plus® conversion process model. The model can then be used to investigate the design of systems for cellulosic ethanol production from field to final product.
Download or read book Uniform format Solid Feedstock Supply System written by J. Richard Hess and published by . This book was released on 2009 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Bioenergy Supply Chains written by Yuanzhe Li and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofuels have been promoted by governmental policies for reducing fossil fuel dependency and greenhouse gas emissions, as well as facilitating regional economic growth. Comprehensive model analysis is needed to assess the economic and environmental impacts of developing bioenergy production systems. For cellulosic biofuel production and supply in particular, existing studies have not accounted for the inter-dependencies between multiple participating decision makers and simultaneously incorporated uncertainties and risks associated with the linked production systems. This dissertation presents a methodology that incorporates uncertainty element to the existing integrated modeling framework specifically designed for advanced biofuel production systems using dedicated energy crops as feedstock resources. The goal of the framework is to support the bioenergy industry for infrastructure and supply chain development. The framework is flexible to adapt to different topological network structures and decision scopes based on the modeling requirements, such as on capturing the interactions between the agricultural production system and the multi-refinery bioenergy supply chain system with regards to land allocation and crop adoption patterns, which is critical for estimating feedstock supply potentials for the bioenergy industry. The methodology is also particularly designed to incorporate system uncertainties by using stochastic programming models to improve the resilience of the optimized system design. The framework is used to construct model analyses in two case studies. The results of the California biomass supply model estimate that feedstock pretreatment via combined torrefaction and pelletization reduces delivered and transportation cost for long-distance biomass shipment by 5% and 15% respectively. The Pacific Northwest hardwood biofuels application integrates full-scaled supply chain infrastructure optimization with agricultural economic modeling and estimates that bio-jet fuels can be produced at costs between 4 to 5 dollars per gallon, and identifies areas suitable for simultaneously deploying a set of biorefineries using adopted poplar as the dedicated energy crop to produce biomass feedstocks. This application specifically incorporates system uncertainties in the crop market and provides an optimal system design solution with over 17% improvement in expected total profit compared to its corresponding deterministic model.