Download or read book Biological Wastewater Treatment Process Design Calculations written by Harlan Bengtson and published by . This book was released on 2017-01-07 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Description of three biological wastewater treatment processes, activated sludge, MBBR (moving bed biofilm reactor), and MBR (membrane bioreactor). Each of these processes is described and discussed in turn. For each of them there is background information about the process, a general description of the process, and description of the process design calculations for that process along with examples illustrating those calculations. Use of spreadsheets for the calculations is covered also, including numerous screenshots of spreadsheets set up to make the various calculations discussed in the book.

Download or read book Design Guides for Biological Wastewater Treatment Processes written by Joseph F. Malina and published by . This book was released on 1972 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report provides a set of guidelines for the design of biological processes for the treatment of municipal wastewater. The equations and factors which must be considered in the design of the activated sludge system, the contact stabilization system, trickling filter plants, aerated lagoons, and waste stabilization ponds are identified. The applicability and limitations of each system and mathematical model of each process are established. Operating data from treatment plants where sufficient applicable data were recorded were used to develop rate constants and other coefficients required for application of the mathematical models and other design of treatment plants. The significant design considerations are discussed, design procedures are outlined and design calculations are developed.

Download or read book Handbook of Biological Wastewater Treatment written by Adrianus van Haandel and published by IWA Publishing. This book was released on 2012-02-20 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this comprehensive new edition of Handbook of Biological Wastewater Treatment ranges from the design of the activated sludge system, final settlers, auxiliary units (sludge thickeners and digesters) to pre-treatment units such as primary settlers and UASB reactors. The core of the book deals with the optimized design of biological and chemical nutrient removal. The book presents the state-of-the-art theory concerning the various aspects of the activated sludge system and develops procedures for optimized cost-based design and operation. It offers a truly integrated cost-based design method that can be easily implemented in spreadsheets and adapted to the particular needs of the user. Handbook of Biological Wastewater Treatment: Second Edition incorporates valuable new material that improves the instructive qualities of the first edition. The book has a new structure that makes the material more readily understandable and the numerous additional examples clarify the text. On the website www.wastewaterhandbook.com three free excel design spreadsheets for different configurations (secondary treatment with and without primary settling and nitrogen removal) can be downloaded to get the reader started with their own design projects. New sections have been added throughout: to explain the difference between true and apparent yield while the section on the F/M ratio, and especially the reasons not to use it, has been expanded; to demonstrate the effect of the oxygen recycle to the anoxic zones on both the denitrification capacity and the concept of available nitrate is explained in more detail. the latest developments on the causes and solution to sludge bulking and scum formation to show the rapid developments of innovative nitrogen removal and sludge separation problems the anaerobic pre-treatment section is completely rewritten based on the experiences obtained from an extensive review of large full-scale UASB based sewage treatment plants a new section on industrial anaerobic wastewater treatment three new appendices have been added. These deal with the calibration of the denitrification model, empirical design guidelines for final settler design (STORA/STOWA and ATV) and with the potential for development of denitrification in the final settler. A new chapter on moving bed biofilm reactors Handbook of Biological Wastewater Treatment: Second Edition is written for post graduate students and engineers in consulting firms and environmental protection agencies. It is an invaluable resource for everybody working in the field of wastewater treatment. Lecturer support material is available when adopted for university courses. This includes course material for the first 7 modules in the form of PDF printouts and an exercise file with questions and answers and a symbol list. Authors: Prof. dr. ir. A.C. van Haandel, Federal University of Campina Grande - Brazil and Ir. J.G.M. van der Lubbe, Biothane Systems International - Veolia, The Netherlands

Download or read book Spreadsheets for MBBR Process Design Calculations written by Harlan Bengtson and published by . This book was released on 2017-01-17 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Background description of MBBR (moving bed biofilm reactor) wastewater treatment process as an attached growth process using plastic carriers on which the biofilm grows. Flow diagrams are shown for BOD removal and for nitrification, including single stage and two stage processes. Discussion of process design calculations, including the surface area loading rate (SALR) and its use to calculate the carrier surface area needed and the MBBR tank volume needed. Example process design calculations are included for a single stage BOD removal MBBR process, a two stage BOD removal MBBR process, a two stage MBBR process for BOD removal and nitrification and for a single stage nitrification MBBR process. Each of the example calculations includes a screenshot of a spreadsheet for carrying out the MBBR process design calculation for that example.

Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.

Download or read book Biological Process Design for Wastewater Treatment written by Larry D. Benefield and published by Prentice Hall. This book was released on 1980 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biological Wastewater Treatment in Warm Climate Regions written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2005-09-30 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological Wastewater Treatment in Warm Climate Regions gives a state-of-the-art presentation of the science and technology of biological wastewater treatment, particularly domestic sewage. The book covers the main treatment processes used worldwide with wastewater treatment in warm climate regions given a particular emphasis where simple, affordable and sustainable solutions are required. This comprehensive book presents in a clear and informative way the basic principles of biological wastewater treatment, including theory and practice, and covering conception, design and operation. In order to ensure the practical and didactic view of the book, 371 illustrations, 322 summary tables and 117 examples are included. All major wastewater treatment processes are covered by full and interlinked design examples which are built up throughout the book, from the determination of wastewater characteristics, the impact of discharge into rivers and lakes, the design of several wastewater treatment processes and the design of sludge treatment and disposal units. The 55 chapters are divided into 7 parts over two volumes: Volume One: (1) Introduction to wastewater characteristics, treatment and disposal; (2) Basic principles of wastewater treatment; (3) Stabilisation ponds; (4) Anaerobic reactors; Volume Two: (5) Activated sludge; (6) Aerobic biofilm reactors; (7) Sludge treatment and disposal. As well as being an ideal textbook, Biological Wastewater Treatment in Warm Climate Regions is an important reference for practising professionals such as engineers, biologists, chemists and environmental scientists, acting in consulting companies, water authorities and environmental agencies.

Download or read book The MBR Book written by Simon Judd and published by Elsevier. This book was released on 2011-04-18 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of membranes is increasing throughout industry, and particularly the water industry.The municipal water industry, which is concerned with the provision of clean drinking water to the population, is a big user and developer of membrane technology which helps it to provide water free of pathogens, chemicals, odours and unwanted tastes. Municipal authorities also have to process sewage and waste water, and membranes are used extensively in these processes. The MBR Book covers all important aspects of Membrane BioReactors in water and waste water treatment, from the fundamentals of the processes via design principles to MBR technologies. Industrial case studies help interpret actual results and give pointers for best practice. Useful appendices provide data on commercial membranes and international membrane organisations. * Major growth area in the water industries * Internationally-known author * Principles and practice, backed by case studies

Download or read book Biological Wastewater Treatment Principles Modeling and Design written by Guang-Hao Chen and published by IWA Publishing. This book was released on 2020-07-15 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book was published in 2008 and it went on to become IWA Publishing’s bestseller. Clearly there was a need for it because over the twenty years prior to 2008, the knowledge and understanding of wastewater treatment had advanced extensively and moved away from empirically-based approaches to a fundamental first-principles approach based on chemistry, microbiology, physical and bioprocess engineering, mathematics and modelling. However the quantity, complexity and diversity of these new developments was overwhelming for young water professionals, particularly in developing countries without readily available access to advanced-level tertiary education courses in wastewater treatment. For a whole new generation of young scientists and engineers entering the wastewater treatment profession, this book assembled and integrated the postgraduate course material of a dozen or so professors from research groups around the world who have made significant contributions to the advances in wastewater treatment. This material had matured to the degree that it had been codified into mathematical models for simulation with computers. The first edition of the book offered, that upon completion of an in-depth study of its contents, the modern approach of modelling and simulation in wastewater treatment plant design and operation could be embraced with deeper insight, advanced knowledge and greater confidence, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks, or biofilm systems. However, the advances and developments in wastewater treatment have accelerated over the past 12 years since publication of the first edition. While all the chapters of the first edition have been updated to accommodate these advances and developments, some, such as granular sludge, membrane bioreactors, sulphur conversion-based bioprocesses and biofilm reactors which were new in 2008, have matured into new industry approaches and are also now included in this second edition. The target readership of this second edition remains the young water professionals, who will still be active in the field of protecting our precious water resources long after the aging professors who are leading some of these advances have retired. The authors, all still active in the field, are aware that cleaning dirty water has become more complex but that it is even more urgent now than 12 years ago, and offer this second edition to help the young water professionals engage with the scientific and bioprocess engineering principles of wastewater treatment science and technology with deeper insight, advanced knowledge and greater confidence built on stronger competence.

Download or read book Basic Principles of Wastewater Treatment written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Principles of Wastewater Treatment is the second volume in the series Biological Wastewater Treatment, and focusses on the unit operations and processes associated with biological wastewater treatment. The major topics covered are: microbiology and ecology of wastewater treatment reaction kinetics and reactor hydraulics conversion of organic and inorganic matter sedimentation aeration The theory presented in this volume forms the basis upon which the other books of the series are built. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Wastewater Characteristics, Treatment and Disposal; Volume 3: Waste Stabilisation Ponds; Volume 4: Anaerobic Reactors; Volume 5: Activated Sludge and Aerobic Biofilm Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book Dynamical Modelling Estimation in Wastewater Treatment Processes written by D. Dochain and published by IWA Publishing. This book was released on 2001-12-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental quality is becoming an increasing concern in our society. In that context, waste and wastewater treatment, and more specifically biological wastewater treatment processes play an important role. In this book, we concentrate on the mathematical modelling of these processes. The main purpose is to provide the increasing number of professionals who are using models to design, optimise and control wastewater treatment processes with the necessary background for their activities of model building, selection and calibration. The book deals specifically with dynamic models because they allow us to describe the behaviour of treatment plants under the highly dynamic conditions that we want them to operate (e.g. Sequencing Batch Reactors) or we have to operate them (e.g. storm conditions, spills). Further extension is provided to new reactor systems for which partial differential equation descriptions are necessary to account for their distributed parameter nature (e.g. settlers, fixed bed reactors). The model building exercise is introduced as a step-wise activity that, in this book, starts from mass balancing principles. In many cases, different hypotheses and their corresponding models can be proposed for a particular process. It is therefore essential to be able to select from these candidate models in an objective manner. To this end, structure characterisation methods are introduced. Important sections of the book deal with the collection of high quality data using optimal experimental design, parameter estimation techniques for calibration and the on-line use of models in state and parameter estimators. Contents Dynamical Modelling Dynamical Mass Balance Model Building and Analysis Structure Characterisation (SC) Structural Identifiability Practical Identifiability and Optimal Experiment Design for Parameter Estimation (OED/PE) Estimation of Model Parameters Recursive State and Parameter Estimation Glossary Nomenclature

Download or read book Wastewater Treatment Plants written by Syed R. Qasim and published by Routledge. This book was released on 2017-11-22 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.

Download or read book Design and Retrofit of Wastewater Treatment Plants for Biological Nutritient Removal written by Clifford W. Randall and published by CRC Press. This book was released on 1998-05-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents information that can be used for the design and operation of wastewater treatment plants that utilize biological nutrient removal processes, i.e., processes that utilize biological mechanisms instead of chemical mechanisms, to remove phosphorus and nitrogen from wastewaters. The book provides: basic fundamentals, concepts, and theories; design of prefermentation units, various types of BNR systems, and secondary clarifiers; retrofitting conventional activated sludge plants; modeling considerations; and special considerations for BNR systems. It includes full-scale and pilot plant case histories, design examples, and retrofit of existing plants.

Download or read book Biological Wastewater Treatment written by Mogens Henze and published by IWA Publishing (International Water Assoc). This book was released on 1881 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: For information on the online course in Biological Wastewater Treatment from UNESCO-IHE, visit: http://www.iwapublishing.co.uk/books/biological-wastewater-treatment-online-course-principles-modeling-and-design Over the past twenty years, the knowledge and understanding of wastewater treatment have advanced extensively and moved away from empirically-based approaches to a first principles approach embracing chemistry, microbiology, physical and bioprocess engineering, and mathematics. Many of these advances have matured to the degree that they have been codified into mathematical models for simulation with computers. For a new generation of young scientists and engineers entering the wastewater treatment profession, the quantity, complexity and diversity of these new developments can be overwhelming, particularly in developing countries where access is not readily available to advanced level tertiary education courses in wastewater treatment. Biological Wastewater Treatment addresses this deficiency. It assembles and integrates the postgraduate course material of a dozen or so professors from research groups around the world that have made significant contributions to the advances in wastewater treatment. The book forms part of an internet-based curriculum in biological wastewater treatment which also includes: Summarized lecture handouts of the topics covered in book Filmed lectures by the author professors Tutorial exercises for students self-learning Upon completion of this curriculum the modern approach of modelling and simulation to wastewater treatment plant design and operation, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks or biofilm systems, can be embraced with deeper insight, advanced knowledge and greater confidence.

Download or read book Activated Sludge and Aerobic Biofilm Reactors written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book Biological Wastewater Treatment written by C. P. Leslie Grady Jr. and published by CRC Press. This book was released on 2011-05-09 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following in the footsteps of previous highly successful and useful editions, Biological Wastewater Treatment, Third Edition presents the theoretical principles and design procedures for biochemical operations used in wastewater treatment processes. It reflects important changes and advancements in the field, such as a revised treatment of the micr

Download or read book Sludge Treatment and Disposal written by Cleverson Vitorio Andreoli and published by IWA Publishing. This book was released on 2007-03-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Treatment and Disposal is the sixth volume in the series Biological Wastewater Treatment. The book covers in a clear and informative way the sludge characteristics, production, treatment (thickening, dewatering, stabilisation, pathogens removal) and disposal (land application for agricultural purposes, sanitary landfills, landfarming and other methods). Environmental and public health issues are also fully described. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 5: Activated Sludge and Aerobic Biofilm Reactors