Download or read book Biocompatibility Protocols for Medical Devices and Materials written by Prakash Srinivasan Timiri Shanmugam and published by Elsevier. This book was released on 2023-04-07 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocompatibility Protocols for Medical Devices and Materials provides comprehensive coverage of the basic science and toxicological testing protocols necessary for the risk assessment and safety analysis of medical devices and materials which are based on the ISO guidelines for body contact and duration of contact. The book begins with device/component selection for toxicological experiments and provides an introduction to topics such as sensitization, irritation tests, material-mediated pyrogenicity, and bacterial-mediated pyrogenicity. Toxicology-related chapters explain the protocols for cytotoxicity, acute systemic toxicity, repeated-exposure systemic toxicity, genotoxicity, carcinogenicity, and reproductive toxicity testing. Biocompatibility Protocols for Medical Devices and Materials is a practical guide that provides step-by-step toxicological protocols ranging from materials selection to data interpretation for toxicologists, biomedical researchers, healthcare professionals, product developers, and others working in risk assessment and safety analysis of medical devices. - Explains the biocompatibility test protocols for medical devices - Provides an overview about chemical characterization - Describes toxicokinetic, carcinogenicity, and reproductive toxicity studies - Discusses the basic points needed to leverage the data from another device

Download or read book Toxicity Testing in the 21st Century written by National Research Council and published by National Academies Press. This book was released on 2007-10-05 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in molecular biology and toxicology are paving the way for major improvements in the evaluation of the hazards posed by the large number of chemicals found at low levels in the environment. The National Research Council was asked by the U.S. Environmental Protection Agency to review the state of the science and create a far-reaching vision for the future of toxicity testing. The book finds that developing, improving, and validating new laboratory tools based on recent scientific advances could significantly improve our ability to understand the hazards and risks posed by chemicals. This new knowledge would lead to much more informed environmental regulations and dramatically reduce the need for animal testing because the new tests would be based on human cells and cell components. Substantial scientific efforts and resources will be required to leverage these new technologies to realize the vision, but the result will be a more efficient, informative and less costly system for assessing the hazards posed by industrial chemicals and pesticides.

Download or read book Biocompatibility and Performance of Medical Devices written by Jean-Pierre Boutrand and published by Woodhead Publishing. This book was released on 2019-11-21 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocompatibility and Performance of Medical Devices, Second Edition, provides an understanding of the biocompatibility and performance tests for ensuring that biomaterials and medical devices are safe and will perform as expected in the biological environment. Sections cover key concepts and challenges faced in relation to biocompatibility in medical devices, discuss the evaluation and characterization of biocompatibility in medical devices, describe preclinical performance studies for bone, dental and soft tissue implants, and provide information on the regulation of medical devices in the European Union, Japan and China. The book concludes with a review of histopathology principles for biocompatibility and performance studies. - Presents diverse insights from experts in government, industry and academia - Delivers a comprehensive overview of testing and interpreting medical device performance - Expanded to include new information, including sections on managing extractables, accelerating and simplifying medical device development through screening and alternative biocompatibility methods, and quality strategies which fasten device access to market

Download or read book Biomedical Product and Materials Evaluation written by P.V. Mohanan and published by Woodhead Publishing. This book was released on 2022-01-22 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical Product and Materials Evaluation: Standards and Ethics provides a much-needed overview of the procedures, issues, standards and ethical issues in the early development of biomedical products. The book covers a range of key biomedical products, from 3D printed organs and blood derived products, to stem calls and decellularized tissue products. Each chapter reviews a single product type, associated materials, biomedical applications, proven development strategies, and potential challenges. The core focus of the book is on the standardization and ethical aspects of biomedical product development, with these elements addressed and discussed in chapters dedicated to product evaluation. This is a useful reference for academics, researchers and industry professionals in R&D groups with an interest in biomaterial research and production, as well as those working in the fields of biomedical engineering, biotechnology and toxicology. - Covers a variety of biomedical products, including specific biomaterials, organs-on-chips, wound care products, combinational products, and more - Delves into strategies and considerations for product evaluation, including cytotoxicity assays, microbial and blood compatibility studies - Discusses standardization and ethical hurdles in biomedical product development and how to overcome them

Download or read book Password Book Include Alphabetical Index with Cute Flowers Seamless written by Shamrock Logbook and published by Independently Published. This book was released on 2019-02-15 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organize all your website account logins and passwords. No need to use Post-it notes or scraps of paper. This notebook contains more 300 places to store your password. The notebook contains spaces for website address, user name, email, password.

Download or read book WHO Expert Committee on Specifications for Pharmaceutical Preparations written by World Health Organization and published by World Health Organization. This book was released on 2024-04-26 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines and provision of global regulatory tools. The Expert Committee develops standards through worldwide consultation and an international consensus-building process. The following new guidance texts were adopted and recommended for use: WHO good manufacturing practices for excipients used in pharmaceutical products (revision); IAEA/WHO good manufacturing practices for in-house cold kits for radiopharmaceutical preparations (new); WHO good practices for pharmaceutical quality control laboratories (revision); WHO/UNFPA female condom generic specification (new); WHO Biowaiver List: proposal to waive in vivo bioequivalence requirements for WHO Model List of Essential Medicines immediate-release (updated), solid oral dosage forms; WHO guideline on Biopharmaceutics Classification System-based biowaivers (revision); and Multisource (generic) pharmaceutical products: guidelines on registration requirements to establish interchangeability (republished). All of the above are included in this report and recommended for implementation.

Download or read book Plastics in Medical Devices written by Vinny R. Sastri and published by William Andrew. This book was released on 2021-11-24 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics in Medical Devices: Properties, Requirements, and Applications, Third Edition provides a comprehensive overview on the main types of plastics used in medical device applications. The book focuses on the applications and properties that are most important in medical device design, such as chemical resistance, sterilization capability and biocompatibility. The roles of additives, stabilizers and fillers as well as the synthesis and production of polymers are covered and backed up with a wealth of data tables. The book also covers other key aspects in detail, including regulations, compliance, purchasing controls and supplier controls, and process validation. This updated edition has been thoroughly revised with regard to new plastic materials, applications and requirements. This is a valuable resource for engineers, scientists and managers involved in the design and manufacture of medical devices. - Presents detailed coverage of commercially available plastics used in medical device applications, organized by polymer type and supported by data - Includes up-to-date regulatory requirements and practical information on purchasing and supplier controls, process validation and risk management - Supports the development, marketing and commercialization of medical devices and materials for use in medical devices

Download or read book Federal Register written by and published by . This book was released on 1990-05 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book GB T GBT Product Catalog Translated English of Chinese Standard GB T GBT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB/T; GBT.

Download or read book Technical specifications for pre market assessment of medical masks written by World Health Organization and published by World Health Organization. This book was released on 2023-10-19 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook Of Biomaterials Evaluation written by Andreas F von Recum and published by CRC Press. This book was released on 1998-12-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook addresses the needs of those who are involved in inventing, developing, and testing implants and are concerned about the interactions between biomaterial and body tissue. The authors explore the physical, chemical, mechanical and regulatory considerations of synthetic materials used in surgical and implant procedures, and how these factors impact the latest developments and new approaches. This updated edition provides the biomaterials professional with necessary information on a range of issues, including bulk characterization, surface evaluations, toxicological evaluations, in vitro methods for safety evaluation, methods for evaluating materials in special applications, surgical considerations, systems implantology, soft and hard tissue history, regulatory aspects, and clinical trials.

Download or read book Planning Writing and Reviewing Medical Device Clinical and Performance Evaluation Reports CERs PERs written by Joy Frestedt and published by Elsevier. This book was released on 2024-09-27 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Planning, Writing, and Reviewing Medical Device Clinical Evaluation Reports guides readers through clinical data evaluation of medical devices, in compliance with the EU MDR requirements and other similar regulatory requirements throughout the world. This book brings together knowledge learned as the author constructed hundreds of CERs and taught thousands of learners on how to conduct clinical data evaluations. This book will support training for clinical engineers, clinical evaluation scientists, and experts reviewing medical device CERs, and will help individual writers, teams and companies to develop stronger, more robust CERs. Identifies and explains data analysis for clinical evaluation of medical devices Teaches readers how to understand and evaluate medical device performance and safety in the context of new regulations Provides analysis of new clinical evaluation criteria in the context of medical device design as well as in-hospital deployment and servicing

Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.

Download or read book Immunotoxicity Testing written by Jamie C. DeWitt and published by Humana. This book was released on 2019-06-22 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated volume utilizes the expertise of scientists currently engaged in immunotoxicity testing to provide the reader with lab-ready procedures and the background information needed to identify effective testing approaches. Dedicated to identifying and describing exogenous agents that can modify immune function, uncovering modes and mechanisms of action for such agents, and translating data from the laboratory and from the clinic to better predict health risks as well as benefits to those who are exposed to immunomodulatory agents, immunotoxicity testing continues to be a vital field of study, and this collection highlights both the “tried and true” methods as well as alternative protocols that have been more recently developed. Written in the highly successful Methods in Molecular Biology format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and tips on troubleshooting and avoiding known pitfalls. Authoritative and practical, Immunotoxicity Testing: Methods and Protocols, Second Edition serves as a valuable contribution to the continued evolution and the application of immunotoxicity testing.

Download or read book Integrated Safety and Risk Assessment for Medical Devices and Combination Products written by Shayne C. Gad and published by Springer Nature. This book was released on 2020-02-24 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the safety assessment (“biocompatibility”) of medical devices has been focused on issues of local tissue tolerance (irritation, sensitization, cytotoxicity) and selected quantal effects (genotoxicity and acute lethality) since first being regulated in the late 1950s, this has changed as devices assumed a much more important role in healthcare and became more complex in both composition and in their design and operation. Add to this that devices now frequently serve as delivery systems for drugs, and that drugs may be combined with devices to improve device performance, and the problems of ensuring patient safety with devices has become significantly more complex. A part of this, requirements for ensuring safety (once based on use of previously acceptable materials – largely polymers and metals) have come to requiring determining which chemical entities are potentially released from a device into patients (and how much is released). Then an appropriate and relevant (yet also conservative) risk assessment must be performed for each identified chemical structure. The challenges inherent in meeting the current requirements are multifold, and this text seeks to identify, understand, and solve all of them. • Identify and verify the most appropriate available data. • As in most cases such data is for a different route of exposure, transform it for use in assessing exposure by the route of interest. • As the duration (and rate) of exposure to moieties released from a device are most frequently different (longer) than what available data speaks to, transformation across tissue is required. • As innate and adaptive immune responses are a central part of device/patient interaction, assessing potential risks on this basis are required. • Incorporating assessments for special populations such as neonates. • Use of (Q)SAR (Quantitative Structure Activity Relationships) modeling in assessments. • Performance and presentation of integrative assessments covering all potential biologic risks. Appendices will contain summarized available biocompatibility data for commonly used device materials (polymers and metals) and safety assessments on the frequently seen moieties in extractions from devices.

Download or read book GB T 2023 GB 2023 Chinese National Standard PDF English Catalog year 2023 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-04-12 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2023.

Download or read book How Tobacco Smoke Causes Disease written by United States. Public Health Service. Office of the Surgeon General and published by . This book was released on 2010 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report considers the biological and behavioral mechanisms that may underlie the pathogenicity of tobacco smoke. Many Surgeon General's reports have considered research findings on mechanisms in assessing the biological plausibility of associations observed in epidemiologic studies. Mechanisms of disease are important because they may provide plausibility, which is one of the guideline criteria for assessing evidence on causation. This report specifically reviews the evidence on the potential mechanisms by which smoking causes diseases and considers whether a mechanism is likely to be operative in the production of human disease by tobacco smoke. This evidence is relevant to understanding how smoking causes disease, to identifying those who may be particularly susceptible, and to assessing the potential risks of tobacco products.