Download or read book Benchmarking for Validation and Verification of THM Simulators with Special Regard to Fluid Dynamic Processes in Repository Systems written by Oliver Czaikowski and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GeomInt Discontinuities in Geosystems From Lab to Field Scale written by Olaf Kolditz and published by Springer Nature. This book was released on 2023-05-02 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. In view of growing conflicts over strategic georesources, the use of the geological subsurface in the sense of a regional resource is becoming increasingly important. In this context, georeservoirs are playing an important role for the energy transition not only as a source of energy but also as a storage facility and deep geological disposal for energy waste. The success of the energy transition also depends to a large extent on the efficient and safe use of underground resources. This book complements the previous basic book (GeomInt—Integrity of Host Rocks) with a series of application examples in different rock formations, clay, salt, and crystalline. The methodology developed in GeomInt is used, among others, in the Mont Terri underground research laboratory (Opalinus Clay), in the large borehole test in Springen (salt rock) and in the “Reiche Zeche” teaching and research mine (crystalline rock). In addition, new methodological developments are also taken up in experiments and models and embedded in workflows for geotechnical system analyses. The present book summarizes the results of the collaborative project “GeomInt2: Geomechanical integrity of host and barrier rocks - experiment, modeling and analysis of discontinuities” within the program: Geo Research for Sustainability (GEO: N) of the Federal Ministry of Education and Research (BMBF).
Download or read book Verification and Validation for Modeling and Simulation written by Jeffrey Strickland and published by Lulu.com. This book was released on 2014-12-08 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work began when I was appointed as a Technical Director for Modeling and Simulation (M&S) Verification and Validation (V&V) for a major defense system in 2008. It is intended to provide the nuts and bolts of performing M&S V&V in one volume. It is not intended to provide a holistic approach to M&S V&V, as that can be derived from other sources. As such, this book assumes a basic understanding of V&V, including its place in the lifecycle, its purpose and its scope for ensuring the quality of models and simulations. During the process of developing this text, the Simulation Interoperability Standards Organization (SISO) completed SISO-GUIDE-001.2-2013, Guide for Generic Methodology for Verification and Validation (GM-VV) to Support Acceptance of Models, Simulations, and Data, 2 Volumes, June 2013. The guide does serve the purpose not covered by this book. This text provides procedural details for performing V&V. The procedures are static, dynamic and informal.
Download or read book System Validation and Verification written by Jeffrey O. Grady and published by CRC Press. This book was released on 1997-11-25 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historically, the terms validation and verification have been very loosely defined in the system engineering world, with predictable confusion. Few hardware or software testing texts even touch upon validation and verification, despite the fact that, properly employed, these test tools offer system and test engineers powerful techniques for identifying and solving problems early in the design process. Together, validation and verification encompass testing, analysis, demonstration, and examination methods used to determine whether a proposed design will satisfy system requirements. System Validation and Verification clear definitions of the terms and detailed information on using these fundamental tools for problem solving. It smoothes the transition between requirements and design by providing methods for evaluating the ability of a given approach to satisfy demanding technical requirements. With this book, system and test engineers and project managers gain confidence in their designs and lessen the likelihood of serious problems cropping up late in the program. In addition to explanations of the theories behind the concepts, the book includes practical methods for each step of the process, examples from the author's considerable experience, and illustrations and tables to support the ideas. Although not primarily a textbook, System Validation and Verification is based in part on validation and verification courses taught by the author and is an excellent supplemental reference for engineering students. In addition to its usefulness to system engineers, the book will be valuable to a wider audience including manufacturing, design, software , and risk management project engineers - anyone involved in large systems design projects.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AIAA Guide for the Verification and Validation of Computational Fluid Dynamics Simulations written by American Institute of Aeronautics and Astronautics and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document defines a number of key terms, discusses fundamental concepts, and specifies general procedures for conducting verification and validation of computational fluid dynamics simulations. It's goal is to provide a foundation for the major issues and concepts in verification and validation. However, it does not recommend standards in these areas because a number of important issues are not yet resolved.
Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2014-11-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book provides guidance to understanding complicated coupled processes based on the experimental data available and implementation of developed algorithms in numerical codes. Results of selected test cases in the fields of closed-form solutions (e.g., deformation processes), single processes (such as groundwater flow) as well as coupled processes are presented. It is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation with the community.
Download or read book Transport Phenomena in Porous Media II written by I. Pop and published by Elsevier. This book was released on 2002-06-20 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport phenomena in porous media continues to be a field which attracts intensive research activity. This is primarily due to the fact that it plays an important and practical role in a large variety of diverse scientific applications. Transport Phenomena in Porous Media II covers a wide range of the engineering and technological applications, including both stable and unstable flows, heat and mass transfer, porosity, and turbulence.Transport Phenomena in Porous Media II is the second volume in a series emphasising the fundamentals and applications of research in porous media. It contains 16 interrelated chapters of controversial, and in some cases conflicting, research, over a wide range of topics. The first volume of this series, published in 1998, met with a very favourable reception. Transport Phenomena in Porous Media II maintains the original concept including a wide and diverse range of topics, whilst providing an up-to-date summary of recent research in the field by its leading practitioners.
Download or read book Recent Advances and Applications of Hybrid Simulation written by Wei Song and published by Frontiers Media SA. This book was released on 2021-01-13 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.
Download or read book Predictive Theoretical and Computational Approaches for Additive Manufacturing written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-12-21 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have great potential for promoting transformative research in many fields across the vast spectrum of engineering and materials science. AM is one of the leading forms of advanced manufacturing which enables direct computer-aided design (CAD) to part production without part-specific tooling. In October 2015 the National Academies of Sciences, Engineering, and Medicine convened a workshop of experts from diverse communities to examine predictive theoretical and computational approaches for various AM technologies. While experimental workshops in AM have been held in the past, this workshop uniquely focused on theoretical and computational approaches and involved areas such as simulation-based engineering and science, integrated computational materials engineering, mechanics, materials science, manufacturing processes, and other specialized areas. This publication summarizes the presentations and discussions from the workshop.
Download or read book Strengthening Forensic Science in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-07-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scores of talented and dedicated people serve the forensic science community, performing vitally important work. However, they are often constrained by lack of adequate resources, sound policies, and national support. It is clear that change and advancements, both systematic and scientific, are needed in a number of forensic science disciplines to ensure the reliability of work, establish enforceable standards, and promote best practices with consistent application. Strengthening Forensic Science in the United States: A Path Forward provides a detailed plan for addressing these needs and suggests the creation of a new government entity, the National Institute of Forensic Science, to establish and enforce standards within the forensic science community. The benefits of improving and regulating the forensic science disciplines are clear: assisting law enforcement officials, enhancing homeland security, and reducing the risk of wrongful conviction and exoneration. Strengthening Forensic Science in the United States gives a full account of what is needed to advance the forensic science disciplines, including upgrading of systems and organizational structures, better training, widespread adoption of uniform and enforceable best practices, and mandatory certification and accreditation programs. While this book provides an essential call-to-action for congress and policy makers, it also serves as a vital tool for law enforcement agencies, criminal prosecutors and attorneys, and forensic science educators.
Download or read book Durability of Geosynthetics written by National Research Council (U.S.). Transportation Research Board and published by Transportation Research Board National Research. This book was released on 1994 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Poromechanics written by Olivier Coussy and published by John Wiley & Sons. This book was released on 2004-03-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and predicting how porous media deform when subjected to external actions and physical phenomena, including the effect of saturating fluids, are of importance to the understanding of geophysics and civil engineering (including soil and rock mechanics and petroleum engineering), as well as in newer areas such as biomechanics and agricultural engineering. Starting from the highly successful First Edition, Coussy has completely re-written Mechanics of Porous Continua/Poromechanics to include: New material for: Partially saturated porous media Reactive porous media Macroscopic electrical effects A single theoretical framework to the subject to explain the interdisciplinary nature of the subject Exercises at the end of each chapter to aid understanding The unified approach taken by this text makes it a valuable addition to the bookshelf of every PhD student and researcher in civil engineering, petroleum engineering, geophysics, biomechanics and material science.
Download or read book The Coding Manual for Qualitative Researchers written by Johnny Saldana and published by SAGE. This book was released on 2009-02-19 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Coding Manual for Qualitative Researchers is unique in providing, in one volume, an in-depth guide to each of the multiple approaches available for coding qualitative data. In total, 29 different approaches to coding are covered, ranging in complexity from beginner to advanced level and covering the full range of types of qualitative data from interview transcripts to field notes. For each approach profiled, Johnny Saldaña discusses the method’s origins in the professional literature, a description of the method, recommendations for practical applications, and a clearly illustrated example.
Download or read book Launch Vehicle Design Process Characterization Technical Integration and Lessons Learned written by J. C. Blair and published by . This book was released on 2001 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clays in Natural and Engineered Barriers for Radioactive Waste Confinement written by S. Norris and published by Geological Society of London. This book was released on 2014-10-24 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Publication contains 43 scientific studies presented at the 5th conference on ‘Clays in natural and engineered barriers for radioactive waste confinement’ held in Montpellier, France in 2012. The conference and this resulting volume cover all the aspects of clay characterization and behaviour considered at various temporal and spatial scales relevant to the confinement of radionuclides in clay, from basic phenomenological process descriptions to the global understanding of performance and safety at repository and geological scales. Special emphasis has been given to the modelling of processes occurring at the mineralogical level within the clay barriers. The papers in this Special Publication consider research into argillaceous media under the following topic areas: large-scale geological characterization; clay-based concept/large-scale experiments; hydrodynamical modelling; geochemistry; geomechanics; mass transfer/gas transfer; mass transfer mechanisms. The collection of different topics presented in this Special Publication demonstrates the diversity of geological repository research.
