Download or read book Bearing Bronzes With Additions of Zinc Phosphorus Nickel and Antimony Classic Reprint written by E. M. Staples and published by Forgotten Books. This book was released on 2018-09-07 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Bearing Bronzes With Additions of Zinc, Phosphorus, Nickel, and Antimony In some specifications lead and zinc are classed as impurities, while in others of a similar nature they are listed as essential constituents. Some of the present specifications for bronze-bearing metals are given in Table 1. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Bearing Bronzes With and Without Zinc Classic Reprint written by H. J. French and published by Forgotten Books. This book was released on 2018-09-28 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Bearing Bronzes With and Without Zinc An adequate testing technique has not yet been developed for wear. Of bearing bronzes in the presence of lubricants, and while the indi Vidual differences shown in Table 4 were disregarded and the average wear rates of groups of bronzes made the basis of the smooth contours of the solid model shown in Figure 11, some definite trends are shown which can justly be considered along with the results of the dry-wear tests. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Copper Alloys written by Luca Collini and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper has been used for thousands of years. In the centuries, both handicraft and industry have taken advantage of its easy castability and remarkable ductility combined with good mechanical and corrosion resistance. Although its mechanical properties are now well known, the simple f.c.c. structure still makes copper a model material for basic studies of deformation and damage mechanism in metals. On the other hand, its increasing use in many industrial sectors stimulates the development of high-performance and high-efficiency copper-based alloys. After an introduction to classification and casting, this book presents modern techniques and trends in processing copper alloys, such as the developing of lead-free alloys and the role of severe plastic deformation in improving its tensile and fatigue strength. Finally, in a specific section, archaeometallurgy techniques are applied to ancient copper alloys. The book is addressed to engineering professionals, manufacturers and materials scientists.
Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Download or read book Materials Handbook written by John A. Vaccari and published by McGraw Hill Professional. This book was released on 2002-07-09 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Materials Handbook is an encyclopedic, A-to-Z organization of all types of materials, featuring their key performance properties, principal characteristics and applications in product design. Materials include ferrous and nonferrous metals, plastics, elastomers, ceramics, woods, composites, chemicals, minerals, textiles, fuels, foodstuffs and natural plant and animal substances --more than 13,000 in all. Properties are expressed in both U.S. customary and metric units and a thorough index eases finding details on each and every material. Introduced in 1929 and often known simply as "Brady's," this comprehensive, one-volume, 1244 page encyclopedia of materials is intended for executives, managers, supervisors, engineers, and technicians, in engineering, manufacturing, marketing, purchasing and sales as well as educators and students. Of the dozens of families of materials updated in the 15th Edition, the most extensive additions pertain to adhesives, activated carbon, aluminides, aluminum alloys, catalysts, ceramics, composites, fullerences, heat-transfer fluids, nanophase materials, nickel alloys, olefins, silicon nitride, stainless steels, thermoplastic elastomers, titanium alloys, tungsten alloys, valve alloys and welding and hard-facing alloys. Also widely updated are acrylics, brazing alloys, chelants, biodegradable plastics, molybdenum alloys, plastic alloys, recyclate plastics, superalloys, supercritical fluids and tool steels. New classes of materials added include aliphatic polyketones, carburizing secondary-hardening steels and polyarylene ether benzimidazoles. Carcinogens and materials likely to be cancer-causing in humans are listed for the first time.
Download or read book The Disappearing Spoon written by Sam Kean and published by Little, Brown. This book was released on 2010-07-12 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: From New York Times bestselling author Sam Kean comes incredible stories of science, history, finance, mythology, the arts, medicine, and more, as told by the Periodic Table. Why did Gandhi hate iodine (I, 53)? How did radium (Ra, 88) nearly ruin Marie Curie's reputation? And why is gallium (Ga, 31) the go-to element for laboratory pranksters? The Periodic Table is a crowning scientific achievement, but it's also a treasure trove of adventure, betrayal, and obsession. These fascinating tales follow every element on the table as they play out their parts in human history, and in the lives of the (frequently) mad scientists who discovered them. The Disappearing Spoon masterfully fuses science with the classic lore of invention, investigation, and discovery -- from the Big Bang through the end of time. Though solid at room temperature, gallium is a moldable metal that melts at 84 degrees Fahrenheit. A classic science prank is to mold gallium spoons, serve them with tea, and watch guests recoil as their utensils disappear.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Mineral Commodity Summaries 2020 written by Government Publishing Office and published by . This book was released on 2020-05-30 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Commodity Summaries 2019
Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.
Download or read book Effect of Heavy Metal Pollution on Plants written by N. W. Lepp and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trace metals occur as natural constituents of the earth's crust, and are ever present constituents of soils, natural waters and living matter. The biological significance of this disparate assemblage of elements has gradually been uncovered during the twentieth century; the resultant picture is one of ever-increasing complexity. Several of these elements have been demonstrated to be essential to the functions of living organisms, others appear to only interact with living matter in a toxic manner, whilst an ever-decreasing number do not fall conveniently into either category. When the interactions between trace metals and plants are considered, one must take full account of the known chemical properties of each element. Consideration must be given to differences in chemical reactivity, solubility and to interactions with other inorganic and organic molecules. A clear understanding of the basic chemical properties of an element of interest is an essential pre-requisite to any subsequent consideration of its biological significance. Due consideration to basic chemical considerations is a theme which runs through the collection of chapters in both volumes.
Download or read book Corrosion Science and Technology written by David E.J. Talbot and published by CRC Press. This book was released on 2018-01-29 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years after its first publication, Corrosion Science and Technology continues to be a relevant practical guide for students and professionals interested in material science. This Third Edition thoroughly covers the basic principles of corrosion science in the same reader-friendly manner that made the previous edition invaluable, and enlarges the scope of the content with expanded chapters on processes for various metals and new technologies for limiting costs and metal degradation in a variety of commercial enterprises not explored in previous editions. This book also presents expertly developed methods of corrosion testing and prediction.
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book Historical Painting Techniques Materials and Studio Practice written by Arie Wallert and published by Getty Publications. This book was released on 1995-08-24 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the fields of conservation, art history, and museum curating, this volume contains the principal papers from an international symposium titled "Historical Painting Techniques, Materials, and Studio Practice" at the University of Leiden in Amsterdam, Netherlands, from June 26 to 29, 1995. The symposium—designed for art historians, conservators, conservation scientists, and museum curators worldwide—was organized by the Department of Art History at the University of Leiden and the Art History Department of the Central Research Laboratory for Objects of Art and Science in Amsterdam. Twenty-five contributors representing museums and conservation institutions throughout the world provide recent research on historical painting techniques, including wall painting and polychrome sculpture. Topics cover the latest art historical research and scientific analyses of original techniques and materials, as well as historical sources, such as medieval treatises and descriptions of painting techniques in historical literature. Chapters include the painting methods of Rembrandt and Vermeer, Dutch 17th-century landscape painting, wall paintings in English churches, Chinese paintings on paper and canvas, and Tibetan thangkas. Color plates and black-and-white photographs illustrate works from the Middle Ages to the 20th century.
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
