Download or read book Basic Vacuum Technology 2nd edition written by A. Chambers and published by CRC Press. This book was released on 1998-01-01 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum technology is widely used in many manufacturing and developmental processes and its applications grow in scope and sophistication. It is an inter-disciplinary subject, embracing aspects of mechanical, electrical and chemical engineering, chemistry, and materials science while having a broad foundation in physics. In spite of its technological importance, and perhaps because of its cross-disciplinary nature, substantial teaching and training is not widely available. Basic Vacuum Technology aims to give readers a firm foundation of fundamental knowledge about the subject and the ability to apply it. This book is an introductory text on how to use vacuum techniques. It provides a good grounding in the basic scientific principles and concepts that underlie the production and measurement of vacua. The authors describe how these are applied in representative low, medium, high, and ultra-high vacuum systems and explain the most important practical aspects of the operation of a large variety of pumps, components, and measuring instrumentation. The book introduces numerical methods for analysis and prediction of the behavior of vacuum systems in terms of the properties of their individual elements and enables readers to recognize and resolve problems with malfunctioning systems.
Download or read book High Vacuum Technology written by Marsbed H. Hablanian and published by Routledge. This book was released on 2017-11-13 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a basic understanding of each important topic in vacuum science and technology, this book concentrates on pumping issues, emphasizes the behavior of vacuum pumps and vacuum systems, and explains the relationships between pumps, instrumentation and high-vacuum system performance. The book delineates the technical and theoretical aspects of the subject without getting in too deep. It leads readers through the subtleties of vacuum technology without using a dissertation on mathematics to get them there. An interesting blend of easy-to-understand technician-level information combined with engineering data and formulae, the book provides a non-analytical introduction to high vacuum technology.
Download or read book Introduction to Vacuum Technology written by David M. Hata and published by Prentice Hall. This book was released on 2008 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approach taken in this book is to approach vacuum systems from a pressure regime viewpoint. That is, after covering some basic chemistry, the first pressure regime covered is the rough vacuum regime. Within the study of rough vacuum systems, the following topics are covered: the gas load, the pumping mechanism, pressure measurement and vacuum system construction. The discussion of rough vacuum is then followed by the study of high-vacuum systems. The same topics are revisited, but this time from a high vacuum perspective. Once both rough vacuum and high vacuum systems are covered, then the topics of leak detection and residual gas analysis are introduced. This approach lends itself to laboratory experimentation. During the review of gas laws from chemistry, there are a number of experiments and demonstrations that can be performed to reinforce basic laws and concepts. Then, during the study of rough vacuum systems, pumpdown times can be calculated and pumpdowns performed in the laboratory. Likewise, during the study of high-vacuum systems, pumpdowns as well as other lab exercises, such as outgassing and residual gas analysis, can be conducted. Coverage of vacuum systems from a pressure regime viewpoint, rather than from a topical viewpoint. Focus on the fundamental science behind vacumm system components. This book is written for users of vacuum systems, especially the technicians that are responsible for maintaining them.
Download or read book Handbook of Vacuum Technology written by Karl Jousten and published by John Wiley & Sons. This book was released on 2016-06-14 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, standard work has been updated to remain an important resource for all those needing detailed knowledge of the theory and applications of vacuum technology. The text covers the existing knowledge on all aspects of vacuum science and technology, ranging from fundamentals to components and operating systems. It features many numerical examples and illustrations to help visualize the theoretical issues, while the chapters are carefully cross-linked and coherent symbols and notations are used throughout the book. The whole is rounded off by a user-friendly appendix of conversion tables, mathematical tools, material related data, overviews of processes and techniques, equipment-related data, national and international standards, guidelines, and much more. As a result, engineers, technicians, and scientists will be able to develop and work successfully with the equipment and environment found in a vacuum.
Download or read book A User s Guide to Vacuum Technology written by John F. O'Hanlon and published by John Wiley & Sons. This book was released on 2005-02-18 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade and a half since the publication of the Second Edition of A User?s Guide to Vacuum Technology there have been many important advances in the field, including spinning rotor gauges, dry mechanical pumps, magnetically levitated turbo pumps, and ultraclean system designs. These, along with improved cleaning and assembly techniques have made contamination-free manufacturing a reality. Designed to bridge the gap in both knowledge and training between designers and end users of vacuum equipment, the Third Edition offers a practical perspective on today?s vacuum technology. With a focus on the operation, understanding, and selection of equipment for industrial processes used in semiconductor, optics, packaging, and related coating technologies, A User?s Guide to Vacuum Technology, Third Edition provides a detailed treatment of this important field. While emphasizing the fundamentals and touching on significant topics not adequately covered elsewhere, the text avoids topics not relevant to the typical user.
Download or read book Vacuum Technology written by Roger Fabian and published by ASM International. This book was released on 1993-01-01 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Modern Vacuum Technology written by Steve Borichevsky and published by Createspace Independent Publishing Platform. This book was released on 2017-09-02 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical information about today's vacuum technology The purpose of this book is to help scientists, engineers and technicians learn about and better understand the vacuum technology found in science and industry today. It is written so that anyone, whether new to the art or an experienced practitioner, who wishes to learn about vacuum engineering can do so quickly and easily. It provides an undercut to the many classic texts that are still available today. Armed with the information contained within, the technologist will be able to go to the more advanced materials, if needed, and absorb that knowledge quickly and efficiently. This second edition contains the absolute latest technology, some not found in any vacuum technology book to date. It has updated information about pressure measurement, pumping and residual gas analysis. You will find information about the cutting edge research being done by NIST to develop quantum based standards. Understanding Modern Vacuum Technology explains concepts and methods by presenting the historical background of the development of the technology and how it has evolved into the technology we use today. It draws on historical papers and patents to show how the technology was conceived and then brings the topic up to modern times. In this way the reader will gain full conceptual understandings so that he or she will be able to then create sound vacuum solutions for the technical challenges that they face. A partial list of topics: Gas Laws Microscopic Description of a Gas Flows and Conductance Pressure Measurement Partial Pressure and Mass Analysis Vapor Pressure Photonic Pressure Measurement Flow Characteristics in Vacuum Rough Vacuum Pumps Diffusion Pumps Turbomolecular Pumps Cryopumps Ion Pumps Getter Pumps Calibrated Leaks Leaks and their Detection In order to learn more, visit www.ModernVacuumTechnology.com.
Download or read book Vacuum written by Pramod K. Naik and published by CRC Press. This book was released on 2018-03-22 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum plays an important role in science and technology. The study of interaction of charged particles, neutrals and radiation with each other and with solid surfaces requires a vacuum environment for reliable investigations. Vacuum has contributed to major advancements made in nuclear science, space, metallurgy, electrical/electronic technology, chemical engineering, transportation, robotics and many other fields. This book is intended to assist students, scientists, technicians and engineers with understanding the basics of vacuum science and technology for application in their projects. The fundamental theories, concepts, devices, applications, and key inventions are discussed.
Download or read book Modern Vacuum Physics written by Austin Chambers and published by CRC Press. This book was released on 2004-08-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Vacuum Physics presents the principles and practices of vacuum science and technology along with a number of applications in research and industrial production. The first half of the book builds a foundation in gases and vapors under rarefied conditions, The second half presents examples of the analysis of representative systems and describe
Download or read book Vacuum Physics and Technology written by and published by Academic Press. This book was released on 1980-01-18 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum Physics and Technology
Download or read book Vacuum and Ultravacuum written by Igor Bello and published by CRC Press. This book was released on 2017-11-02 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum technology has enormous impact on human life in many aspects and fields, such as metallurgy, material development and production, food and electronic industry, microelectronics, device fabrication, physics, materials science, space science, engineering, chemistry, technology of low temperature, pharmaceutical industry, and biology. All decorative coatings used in jewelries and various daily products—including shiny decorative papers, the surface finish of watches, and light fixtures—are made using vacuum technological processes. Vacuum analytical techniques and vacuum technologies are pillars of the technological processes, material synthesis, deposition, and material analyses—all of which are used in the development of novel materials, increasing the value of industrial products, controlling the technological processes, and ensuring the high product quality. Based on physical models and calculated examples, the book provides a deeper look inside the vacuum physics and technology.
Download or read book Handbook of Physical Vapor Deposition PVD Processing written by D. M. Mattox and published by Cambridge University Press. This book was released on 2014-09-19 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of physical vapor deposition (PVD) process technology from the characterizing and preparing the substrate material, through deposition processing and film characterization, to post-deposition processing. The emphasis of the book is on the aspects of the process flow that are critical to economical deposition of films that can meet the required performance specifications. The book covers subjects seldom treated in the literature: substrate characterization, adhesion, cleaning and the processing. The book also covers the widely discussed subjects of vacuum technology and the fundamentals of individual deposition processes. However, the author uniquely relates these topics to the practical issues that arise in PVD processing, such as contamination control and film growth effects, which are also rarely discussed in the literature. In bringing these subjects together in one book, the reader can understand the interrelationship between various aspects of the film deposition processing and the resulting film properties. The author draws upon his long experience with developing PVD processes and troubleshooting the processes in the manufacturing environment, to provide useful hints for not only avoiding problems, but also for solving problems when they arise. He uses actual experiences, called ""war stories"", to emphasize certain points. Special formatting of the text allows a reader who is already knowledgeable in the subject to scan through a section and find discussions that are of particular interest. The author has tried to make the subject index as useful as possible so that the reader can rapidly go to sections of particular interest. Extensive references allow the reader to pursue subjects in greater detail if desired. The book is intended to be both an introduction for those who are new to the field and a valuable resource to those already in the field. The discussion of transferring technology between R&D and manufacturing provided in Appendix 1, will be of special interest to the manager or engineer responsible for moving a PVD product and process from R&D into production. Appendix 2 has an extensive listing of periodical publications and professional societies that relate to PVD processing. The extensive Glossary of Terms and Acronyms provided in Appendix 3 will be of particular use to students and to those not fully conversant with the terminology of PVD processing or with the English language.
Download or read book The Foundations of Vacuum Coating Technology written by Donald M. Mattox and published by William Andrew. This book was released on 2018-08-21 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Foundations of Vacuum Coating Technology, Second Edition, is a revised and expanded version of the first edition, which was published in 2003. The book reviews the histories of the various vacuum coating technologies and expands on the history of the enabling technologies of vacuum technology, plasma technology, power supplies, and low-pressure plasma-enhanced chemical vapor deposition. The melding of these technologies has resulted in new processes and products that have greatly expanded the application of vacuum coatings for use in our everyday lives. The book is unique in that it makes extensive reference to the patent literature (mostly US) and how it relates to the history of vacuum coating. The book includes a Historical Timeline of Vacuum Coating Technology and a Historical Timeline of Vacuum/Plasma Technology, as well as a Glossary of Terms used in the vacuum coating and surface engineering industries. - History and detailed descriptions of Vacuum Deposition Technologies - Review of Enabling Technologies and their importance to current applications - Extensively referenced text - Patents are referenced as part of the history - Historical Timelines for Vacuum Coating Technology and Vacuum/Plasma Technology - Glossary of Terms for vacuum coating
Download or read book Vacuum Deposition onto Webs Films and Foils written by Charles Bishop and published by William Andrew. This book was released on 2015-08-15 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum Deposition onto Webs: Films and Foils, Third Edition, provides the latest information on vacuum deposition, the technology that applies an even coating to a flexible material that can be held on a roll, thereby offering a much faster and cheaper method of bulk coating than deposition onto single pieces or non-flexible surfaces such as glass. This technology has been used in industrial-scale applications for some time, including a wide range of metalized packaging. Its potential as a high-speed, scalable process has seen an increasing range of new products emerging that employ this cost-effective technology, including solar energy products that are moving from rigid panels onto cheaper and more versatile flexible substrates, flexible electronic circuit 'boards', and flexible displays. In this third edition, all chapters are thoroughly revised with a significant amount of new information added, including newly developed barrier measurement techniques, improved in-vacuum monitoring technologies, and the latest developments in Atomic Layer Deposition (ALD). - Provides the know-how to maximize productivity of vacuum coating systems - Thoroughly revised with a significant amount of new information added, including newly developed barrier measurement techniques, improved in-vacuum monitoring technologies, and the latest on Atomic Layer Deposition (ALD) - Presents the latest information on vacuum deposition, the technology that applies an even coating to a flexible material that can be held on a roll, thereby offering a much faster and cheaper method of bulk coating - Enables engineers to specify systems more effectively and enhances dialogue between non-specialists and suppliers/engineers - Empowers those in rapidly expanding fields such as solar energy, display panels, and flexible electronics to unlock the potential of vacuum coating to transform their processes and products
Download or read book Vacuum Science and Technology written by Paul A. Redhead and published by Springer Science & Business Media. This book was released on 1997-05-27 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market: Researchers and technicians in vacuum science, and those interested in the field. This comprehensive overview of the groundbreaking work in vacuum science from 1910 to 1960 presents original biographies of the scientists and engineers at the vanguard of vacuum technology. It also features papers now regarded as milestones. Among these are Saul Dushman's "Theory and Use of the Molecular Gauge" (1915), Pieter Clausing's "The Flow of Highly Rarefied Gases through Tubes of Arbitrary Length" (1932), and L.D. Hall's "Electronic Ultra-High Vacuum Pump" (1932).
Download or read book Vacuum Science and Technology written by Dr. V.V. Rao and published by Allied Publishers. This book was released on 1998-10-17 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a modern and balanced approach while discussing the conceptual and practical aspects of vacuum science and technology. The chapters in the book are planned in systematic fashion from basic concepts through vacuum production and measurement, vacuum components, trouble shooting and then providing applications. It would be useful to students, both at the under-graduate and graduate levels in physics and also in various branches of engineering. In addition, it would be of value to practicing scientists and engineers who have to deal will vacuum science and technology.
Download or read book Technology and Society written by Deborah G. Johnson and published by MIT Press. This book was released on 2008-10-17 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: An anthology of writings by thinkers ranging from Freeman Dyson to Bruno Latour that focuses on the interconnections of technology, society, and values and how these may affect the future. Technological change does not happen in a vacuum; decisions about which technologies to develop, fund, market, and use engage ideas about values as well as calculations of costs and benefits. This anthology focuses on the interconnections of technology, society, and values. It offers writings by authorities as varied as Freeman Dyson, Laurence Lessig, Bruno Latour, and Judy Wajcman that will introduce readers to recent thinking about technology and provide them with conceptual tools, a theoretical framework, and knowledge to help understand how technology shapes society and how society shapes technology. It offers readers a new perspective on such current issues as globalization, the balance between security and privacy, environmental justice, and poverty in the developing world. The careful ordering of the selections and the editors' introductions give Technology and Society a coherence and flow that is unusual in anthologies. The book is suitable for use in undergraduate courses in STS and other disciplines. The selections begin with predictions of the future that range from forecasts of technological utopia to cautionary tales. These are followed by writings that explore the complexity of sociotechnical systems, presenting a picture of how technology and society work in step, shaping and being shaped by one another. Finally, the book goes back to considerations of the future, discussing twenty-first-century challenges that include nanotechnology, the role of citizens in technological decisions, and the technologies of human enhancement.
