Download or read book Technologies for Basic Needs written by Hans Wolfgang Singer and published by Concept Publishing Company. This book was released on 1982 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: ILO pub-WEP pub. Monograph on the appropriate choice of technology to satisfy basic needs in the economic development of developing countries - proposes use of local level technology rather than technology transfer, discusses the role of research and development, extension services, etc., and refers to the need for education and training of technicians and trainers, and to the role of ILO, etc., and includes a directory of development centres dealing mainly with small-scale and rural area technologies. References.
Download or read book Leonardo s Laptop written by Ben Shneiderman and published by MIT Press. This book was released on 2003 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the inspiration of Leonardo da Vinci to build a new, humanistic computing that focuses on users' needs and goals.
Download or read book Basic Engineering Technology written by R L Timings and published by Elsevier. This book was released on 2014-05-12 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Engineering Technology covers various topics related to engineering, from safety procedures and movement of loads to measurement and dimensional control. Marking out, workholding, and toolholding are also discussed, along with joining, assembly, and dismantling. The interpretation of technical drawings, specifications, and data is considered as well. Comprised of 10 chapters, this book begins with a historical overview of the development of the engineering industry, followed by a discussion on the academic qualifications and training of the various categories of technical personnel employed in the industry. The reader is then introduced to safe practices observed in the engineering industry, with emphasis on health and safety legislation, causes of accidents, and accident prevention. Subsequent chapters focus on safety considerations in the movement of loads; measurement and control of dimensional properties; advantages and disadvantages of marking out; workholding and toolholding applications; and assembly and dismantling. This monograph is intended for undergraduate students and those enrolled in training centers and in industrial apprentice training schemes.
Download or read book Adaptive Technology for Special Human Needs written by Arlene Brett and published by SUNY Press. This book was released on 1995-05-04 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the use of computers to assist individuals who have disabilities. The book provides the reader with a comprehensive introduction to the possibilities and limitations inherent in the emerging field of Adaptive Technology.
Download or read book Science and Technology Education and Future Human Needs written by J. L. Lewis and published by Elsevier. This book was released on 2014-05-17 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology Education and Future Human Needs is a collection of papers that tackle concerns in the education of future scientists, particularly concerns in identifying techniques and resource material. The title first covers the impact of science on society, and then proceeds to tackling the relevance of science. Next, the selection talks about the revision of science curricula. Chapter 4 deals with science education and the needs of developing countries, while Chapter 5 talks about problems in implementation. The sixth chapter covers the balance between technology and environment in development, and the seventh chapter tackles the nutritional concerns in national development. In the last chapter, the text talks about addressing human needs first before developing science and technology. The book will be of great interest to individuals concerned with the progress of science and technology.
Download or read book A Basic Human Needs Strategy of Development written by Charles Paolillo and published by . This book was released on 1976 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Appropriate Technology written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Domestic and International Scientific Planning, Analysis, and Cooperation and published by . This book was released on 1978 with total page 1304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology for Development written by United States. Delegation to the U.N. Conference on Science and Technology for Development, 1979, Vienna, Austria and published by . This book was released on 1979 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neal Schuman Library Technology Companion written by John J. Burke and published by ALA Neal-Schuman. This book was released on 2016-02-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Informed by a large-scale survey of librarians across the spectrum of institution types, this guide will be a true technology companion to novices and seasoned LIS professionals alike.
Download or read book Design User Experience and Usability User Experience Design for Everyday Life Applications and Services written by Aaron Marcus and published by Springer. This book was released on 2014-06-11 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 8517, 8518, 8519 and 8520 constitutes the proceedings of the Third International Conference on Design, User Experience, and Usability, DUXU 2014, held as part of the 16th International Conference on Human-Computer Interaction, HCII 2014, held in Heraklion, Crete, Greece in June 2014, jointly with 13 other thematically similar conferences. The total of 1476 papers and 220 posters presented at the HCII 2014 conferences were carefully reviewed and selected from 4766 submissions. These papers address the latest research and development efforts and highlight the human aspects of design and use of computing systems. The papers accepted for presentation thoroughly cover the entire field of Human-Computer Interaction, addressing major advances in knowledge and effective use of computers in a variety of application areas. The total of 256 contributions included in the DUXU proceedings were carefully reviewed and selected for inclusion in this four-volume set. The 69 papers included in this volume are organized in topical sections on design for health; design for reading and learning; design for mobility, transport and safety; design for rural, low literacy and developing communities; design for environment and sustainability; design for human-computer symbiosis.
Download or read book Perspectives on Ecology written by Koula Mellos and published by Springer. This book was released on 1988-11-24 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology for Development written by Robert P. Morgan and published by Elsevier. This book was released on 2013-10-22 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology for Development: The Role of U.S. Universities examines the role of U.S. universities in helping to build an indigenous science and technology (S&T) base in developing countries. U.S. university involvement in engineering, agriculture, and science is analyzed, along with conditions for success or failure and limitations to involvement. Successful experiences in developing countries are highlighted. This book is comprised of seven chapters and begins with an overview of the past legislative mandate for U.S. university involvement in S&T for development. The reader is then introduced to U.S. university activity in three fields: engineering, agriculture, and science. Within the analysis of each field, specific past involvements, current thinking, and field-specific issues are explored. The subsequent chapters discuss future roles for U.S. universities, including types of involvement, mechanisms for involvement, and forms of cooperation among U. S. institutions. Eight legislative changes are outlined for expanding U.S. university involvement in international S&T cooperation. This monograph will be of interest to S&T policymakers and university officials.
Download or read book Digital Transformation and Industry 4 0 written by Dr. Evren Ersoy and published by Dr. Evren Ersoy. This book was released on with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT There are two major technological revolutions in the history of humanity that have been experienced chronologically and continue until today. These are the society 5.0 and industry 4.0 revolutions. The aim is to carry out professional and academic studies that will enable the invention of related technologies in order to increase the welfare level of humanity and reach the targeted level of welfare within the scope of technology and human values. Therefore, the future of societies will be designed with qualified human resources and innovation paradigm, which are two important factors that will enable humanity to be prosperous and sustainable societies. This study covers the transformation of individuals, societies, businesses and especially government authorities for the society 5.0 and industry 4.0 revolutions that will deeply affect all societies globally. It is explained how qualified human resources will change the future with the effect of new technologies and new jobs in the synthesis of technology and people. In addition, there are propositions about how it will affect the development of societies with science, technology, innovation and R&D studies for the intellectual accumulation of qualified people, and most importantly entrepreneurship ecosystem. There are studies on how societies develop the production economy with the innovation-development model, that classical societies are transformed into learning and rational societies, individuals' learning and development responsibilities change and expectations from them are at a higher level, especially technology and science take place in all areas of business and social life. It has been researched which new talents and skills people should have for new jobs within the scope of child and women entrepreneurs, digital natives, and the future of generation x and y. The innovation paradigm is at the heart of these ability and skill researches in the synthesis of technology and people. It has been determined how to use technology and science power for innovation, local and global effects of innovation, and which mission humanity should lead for the future. In addition, Research has been conducted on the most important agendas of today, including innovative development issues with digitalization and digital transformation technologies, transformation of societies, smart cities, digital countries, the future of societies, digital natives and world citizenship, Turkey's digital transformation roadmap proposition, industry 4.0 technology ecosystem and technology development zones in the digital age. Keywords: technology and human, innovation, digital transformation, industry 4.0, society 5.0, future jobs and technology
Download or read book Poverty in Developing Countries written by World Employment Programme and published by International Labour Organization. This book was released on 1992 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics include agricultural development, basic needs, development strategy and planning, economic development and policy, employment, food production, housing needs, income distribution and industrialization. Indexes are divided by references, authors, corporate authors, subject and geographical aspects.
Download or read book Engineering and Sustainable Community Development written by Juan Lucena and published by Springer Nature. This book was released on 2022-06-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Engineering and Sustainable Community Development, presents an overview of engineering as it relates to humanitarian engineering, service learning engineering, or engineering for community development, often called sustainable community development (SCD). The topics covered include a history of engineers and development, the problems of using industry-based practices when designing for communities, how engineers can prepare to work with communities, and listening in community development. It also includes two case studies -- one of engineers developing a windmill for a community in India, and a second of an engineer "mapping communities" in Honduras to empower people to use water effectively -- and student perspectives and experiences on one curricular model dealing with community development. Table of Contents: Introduction / Engineers and Development: From Empires to Sustainable Development / Why Design for Industry Will Not Work as Design for Community / Engineering with Community / Listening to Community / ESCD Case Study 1: Sika Dhari's Windmill / ESCD Case Study 2: Building Organizations and Mapping Communities in Honduras / Students' Perspectives on ESCD: A Course Model / Beyond Engineers and Community: A Path Forward
Download or read book Introduction to Radiologic Technology E Book written by La Verne Tolley Gurley and published by Elsevier Health Sciences. This book was released on 2010-07-22 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here’s everything a beginning radiography student needs to know! Introduction to Radiologic Technology, 7th Edition offers a solid overview of your exciting career as a radiologic technologist. After covering basic learning skills, this guide provides a historical perspective on radiology and insight into key topics such as the language of medicine, digital and conventional imaging, patient care, and radiation safety. Expert authors LaVerne T. Gurley and William J. Callaway describe the classes you will take in your radiography program, the latest changes in the Registry exam, what will be required in the practice setting, and your opportunities for advancement throughout your career. An introduction to radiologic technology includes a concise overview of what to expect in your coursework. Critical thinking skills are highlighted, with four important steps to take in assessing situations and making informed decisions. Career guidelines discuss customer service, ethics and professionalism, how to join professional organizations, and how to keep up with continuing education requirements after graduation. A clear, easy-to-read style does not assume you have prior knowledge of the subject matter. New photographs accurately depict current equipment and practice standards. An increased focus on digital imaging keeps you on the cutting edge of technology. Updates include: Positioning terminology Program accreditations Demographic information for better communication with culturally diverse patients A closer alignment of the book's topics with ASRT Core Curriculum's section on fundamentals.
Download or read book Open Access and the Public Domain in Digital Data and Information for Science written by National Research Council and published by National Academies Press. This book was released on 2004-06-14 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This symposium, which was held on March 10-11, 2003, at UNESCO headquarters in Paris, brought together policy experts and managers from the government and academic sectors in both developed and developing countries to (1) describe the role, value, and limits that the public domain and open access to digital data and information have in the context of international research; (2) identify and analyze the various legal, economic, and technological pressures on the public domain in digital data and information, and their potential effects on international research; and (3) review the existing and proposed approaches for preserving and promoting the public domain and open access to scientific and technical data and information on a global basis, with particular attention to the needs of developing countries.
