Download or read book Basic Electric Machines written by Vincent Del Toro and published by . This book was released on 1990 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: For core courses in Electric Machinery. Focuses on all aspects of steady-state performance, control and applications. (vs. Fitzgerald, Chapman, Nasar, Lindsay/Rashid).
Download or read book Electrical Machines and Drives written by Jan A. Melkebeek and published by Springer. This book was released on 2018-01-20 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to offer a thorough study and reference textbook on electrical machines and drives. The basic idea is to start from the pure electromagnetic principles to derive the equivalent circuits and steady-state equations of the most common electrical machines (in the first parts). Although the book mainly concentrates on rotating field machines, the first two chapters are devoted to transformers and DC commutator machines. The chapter on transformers is included as an introduction to induction and synchronous machines, their electromagnetics and equivalent circuits. Chapters three and four offer an in-depth study of induction and synchronous machines, respectively. Starting from their electromagnetics, steady-state equations and equivalent circuits are derived, from which their basic properties can be deduced. The second part discusses the main power-electronic supplies for electrical drives, for example rectifiers, choppers, cycloconverters and inverters. Much attention is paid to PWM techniques for inverters and the resulting harmonic content in the output waveform. In the third part, electrical drives are discussed, combining the traditional (rotating field and DC commutator) electrical machines treated in the first part and the power electronics of part two. Field orientation of induction and synchronous machines are discussed in detail, as well as direct torque control. In addition, also switched reluctance machines and stepping motors are discussed in the last chapters. Finally, part 4 is devoted to the dynamics of traditional electrical machines. Also for the dynamics of induction and synchronous machine drives, the electromagnetics are used as the starting point to derive the dynamic models. Throughout part 4, much attention is paid to the derivation of analytical models. But, of course, the basic dynamic properties and probable causes of instability of induction and synchronous machine drives are discussed in detail as well, with the derived models for stability in the small as starting point. In addition to the study of the stability in the small, a chapter is devoted to large-scale dynamics as well (e.g. sudden short-circuit of synchronous machines). The textbook is used as the course text for the Bachelor’s and Master’s programme in electrical and mechanical engineering at the Faculty of Engineering and Architecture of Ghent University. Parts 1 and 2 are taught in the basic course ’Fundamentals of Electric Drives’ in the third bachelor. Part 3 is used for the course ’Controlled Electrical Drives’ in the first master, while Part 4 is used in the specialised master on electrical energy.
Download or read book Electrical Machines written by Slobodan N. Vukosavic and published by Springer Science & Business Media. This book was released on 2012-10-26 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Machines primarily covers the basic functionality and the role of electrical machines in their typical applications. The effort of applying coordinate transforms is justified by obtaining a more intuitive, concise and easy-to-use model. In this textbook, mathematics is reduced to a necessary minimum, and priority is given to bringing up the system view and explaining the use and external characteristics of machines on their electrical and mechanical ports. Covering the most relevant concepts relating to machine size, torque and power, the author explains the losses and secondary effects, outlining cases and conditions in which some secondary phenomena are neglected. While the goal of developing and using machine mathematical models, equivalent circuits and mechanical characteristics persists through the book, the focus is kept on physical insight of electromechanical conversion process. Details such as the slot shape and the disposition of permanent magnets and their effects on the machine parameters and performance are also covered.
Download or read book Electrical Machines written by S. K. Sahdev and published by Cambridge University Press. This book was released on 2017-11-24 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers key concepts of electrical machines embedded with solved examples, review questions, illustrations and open book questions.
Download or read book Electric Machines and Power Systems written by Vincent Del Toro and published by Prentice Hall. This book was released on 1985 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Electric Machines A Primer with MATLAB written by Warsame Hassan Ali and published by CRC Press. This book was released on 2019-06-12 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: An electric machine is a device that converts mechanical energy into electrical energy or vice versa. It can take the form of an electric generator, electric motor, or transformer. Electric generators produce virtually all electric power we use all over the world. Electric machine blends the three major areas of electrical engineering: power, control and power electronics. This book presents the relation of power quantities for the machine as the current, voltage power flow, power losses, and efficiency. This book will provide a good understanding of the behavior and its drive, beginning with the study of salient features of electrical dc and ac machines.
Download or read book Electrical Machines written by Jacek F. Gieras and published by CRC Press. This book was released on 2016-10-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book endeavors to break the stereotype that basic electrical machine courses are limited only to transformers, DC brush machines, induction machines, and wound-field synchronous machines. It is intended to serve as a textbook for basic courses on Electrical Machines covering the fundamentals of the electromechanical energy conversion, transformers, classical electrical machines, i.e., DC brush machines, induction machines, wound-field rotor synchronous machines and modern electrical machines, i.e., switched reluctance machines (SRM) and permanent magnet (PM) brushless machines. In addition to academic research and teaching, the author has worked for over 18 years in US high-technology corporative businesses providing solutions to problems such as design, simulation, manufacturing and laboratory testing of large variety of electrical machines for electric traction, energy generation, marine propulsion, and aerospace electric systems.
Download or read book Design of Rotating Electrical Machines written by Juha Pyrhonen and published by John Wiley & Sons. This book was released on 2013-09-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machines An expanded section on the design of permanent magnet synchronous machines, now reporting on the design of tooth-coil, high-torque permanent magnet machines and their properties Large updates and new material on synchronous reluctance machines, air-gap inductance, losses in and resistivity of permanent magnets (PM), operating point of loaded PM circuit, PM machine design, and minimizing the losses in electrical machines> End-of-chapter exercises and new direct design examples with methods and solutions to real design problems> A supplementary website hosts two machine design examples created with MATHCAD: rotor surface magnet permanent magnet machine and squirrel cage induction machine calculations. Also a MATLAB code for optimizing the design of an induction motor is provided Outlining a step-by-step sequence of machine design, this book enables electrical machine designers to design rotating electrical machines. With a thorough treatment of all existing and emerging technologies in the field, it is a useful manual for professionals working in the diagnosis of electrical machines and drives. A rigorous introduction to the theoretical principles and techniques makes the book invaluable to senior electrical engineering students, postgraduates, researchers and university lecturers involved in electrical drives technology and electromechanical energy conversion.
Download or read book Electrical Machines Drives and Power Systems written by Theodore Wildi and published by Pearson Educación. This book was released on 2006 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: The HVDC Light[trademark] method of transmitting electric power. Introduces students to an important new way of carrying power to remote locations. Revised, reformatted Instructor's Manual. Provides instructors with a tool that is much easier to read. Clear, practical approach.
Download or read book Electric Machines written by Ion Boldea and published by CRC Press. This book was released on 2021-10-08 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its comprehensive coverage of the state of the art, this Second Edition introduces basic types of transformers and electric machines. Classifications and characterization—modeling and performance—of power electric transformers (single and multiphase), motors and generators, commercial machines (dc brush, induction dc excited synchronous, PM synchronous, reluctance synchronous) and some new ones (multiphase ac machines, switched reluctance machines) with great potential for industry with rotary or linear motion are all treated in the book. The book covers, in detail, circuit modeling characteristics and performance characteristics under steady state, testing techniques and preliminary electromagnetic-thermic dimensioning with lots of solved numerical examples and special cases to illustrate new electric machines with strong industrialization potential. All formulae used to characterize parameters and performance may be safely used in industry for preliminary designs and have been applied in the book through numerical solved examples of industrial interest. Numerous computer simulation programs in MATLAB® and Simulink® that illustrate performance characteristics present in the chapters are included and many be used as homework to facilitate a deeper understanding of fundamental issues. This book is intended for a first-semester course covering electric transformers, rotary and linear machines, steady-state modeling and performance computation, preliminary dimensioning, and testing standardized and innovative techniques. The textbook may be used by R&D engineers in industry as all machine parameters and characteristics are calculated by ready-to-use industrial design mathematical expressions.
Download or read book Control of Electric Machine Drive Systems written by Seung-Ki Sul and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique approach to sensorless control and regulator design of electric drives Based on the author's vast industry experience and collaborative works with other industries, Control of Electric Machine Drive Systems is packed with tested, implemented, and verified ideas that engineers can apply to everyday problems in the field. Originally published in Korean as a textbook, this highly practical updated version features the latest information on the control of electric machines and apparatus, as well as a new chapter on sensorless control of AC machines, a topic not covered in any other publication. The book begins by explaining the features of the electric drive system and trends of development in related technologies, as well as the basic structure and operation principles of the electric machine. It also addresses steady state characteristics and control of the machines and the transformation of physical variables of AC machines using reference frame theory in order to provide a proper foundation for the material. The heart of the book reviews several control algorithms of electric machines and power converters, explaining active damping and how to regulate current, speed, and position in a feedback manner. Seung-Ki Sul introduces tricks to enhance the control performance of the electric machines, and the algorithm to detect the phase angle of an AC source and to control DC link voltages of power converters. Topics also covered are: Vector control Control algorithms for position/speed sensorless drive of AC machines Methods for identifying the parameters of electric machines and power converters The matrix algebra to model a three-phase AC machine in d-q-n axes Every chapter features exercise problems drawn from actual industry experience. The book also includes more than 300 figures and offers access to an FTP site, which provides MATLAB programs for selected problems. The book's practicality and realworld relatability make it an invaluable resource for professionals and engineers involved in the research and development of electric machine drive business, industrial drive designers, and senior undergraduate and graduate students. To obtain instructor materials please send an email to [email protected] To visit this book's FTP site to download MATLAB codes, please click on this link: ftp://ftp.wiley.com/public/sci_tech_med/electric_machine/ MATLAB codes are also downloadable from Wiley Booksupport Site at http://booksupport.wiley.com
Download or read book Electrical Machine Drives written by Claiton Moro Franchi and published by CRC Press. This book was released on 2019-01-14 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was developed based on the author's experience of more than 10 years working in research and industry in the areas of electrical drives and industrial automation. Seeking the connection between theory and its applications, the author presents a detailed conceptual description with lots of figures and illustrative examples that harmonize the theoretical approach with the practice. Composed of eleven chapters and three appendices, the book describes in a dynamic and didactic way the fundamental concepts related to the drives of electric machines. At the end of each chapter is a set of exercises to ease the fixation of the presented content.
Download or read book Electric Machines written by Charles A. Gross and published by CRC Press. This book was released on 2006-10-20 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two major broad applications of electrical energy are information processing and energy processing. Hence, it is no wonder that electric machines have occupied a large and revered space in the field of electrical engineering. Such an important topic requires a careful approach, and Charles A. Gross' Electric Machines offers the most balanced, application-oriented, and modern perspective on electromagnetic machines available. Written in a style that is both accessible and authoritative, this book explores all aspects of electromagnetic-mechanical (EM) machines. Rather than viewing the EM machine in isolation, the author treats the machine as part of an integrated system of source, controller, motor, and load. The discussion progresses systematically through basic machine physics and principles of operation to real-world applications and relevant control issues for each type of machine presented. Coverage ranges from DC, induction, and synchronous machines to specialized machines such as transformers, translational machines, and microelectromechanical systems (MEMS). Stimulating example applications include electric vehicles, wind energy, and vertical transportation. Numerous example problems illustrate and reinforce the concepts discussed. Along with appendices filled with unit conversions and background material, Electric Machines is a succinct, in-depth, and complete guide to understanding electric machines for novel applications.
Download or read book Design and Testing of Electrical Machines written by M. V. Deshpande and published by PHI Learning Pvt. Ltd.. This book was released on 2009-12 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basic theory, principle of operation and characteristics of transformers, three-phase induction motors, single-phase induction motors, synchronous machines and dc machines are dealt with in Appendices to provide the background for the design of these machines. The initial chapters of the book are devoted to basic parameters of design of electrical apparatus, characteristics of magnetic, electric and insulating materials, construction of electrical machines, and basic design requirements of magnetic and electrical circuits of machines. Detailed procedures for designing transformers, three-phase induction motors, single-phase induction motors, synchronous machines and dc machines are explained in a simple and logical way. Several sample designs have been wroked out in detail. Methods of carrying out various tests and maintaining test records are discussed in detail. The use of computers in designing electrical machines has been illustrated. An exclusive chapter on special machines explains the basic theory and applications of stepper motors, rotating phase converters, pole amplitude modulated (PAM) motors, reluctance motors and energy efficient motors. This book is intended for degree and diploma students of electrical engineering and professional examinations of the Institution of Engineers (India). It will be useful for electrical engineers in industry engaged in design, manufacture and testing of electrical machines.
Download or read book Electric Machinery Fundamentals written by Stephen J. Chapman and published by . This book was released on 2005 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Machinery Fundamentals continues to be a best-selling machinery text due to its accessible, student-friendly coverage of the important topics in the field. Chapman’s clear writing persists in being one of the top features of the book. Although not a book on MATLAB, the use of MATLAB has been enhanced in the fourth edition. Additionally, many new problems have been added and remaining ones modified. Electric Machinery Fundamentals is also accompanied by a website the provides solutions for instructors, as well as source code, MATLAB tools, and links to important sites for students.
Download or read book Electric Machines and Drives written by Ned Mohan and published by Wiley Global Education. This book was released on 2012-04-13 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a three-book series. Ned Mohan has been a leader in EES education and research for decades, as author of the best-selling text/reference Power Electronics. This book emphasizes applications of electric machines and drives that are essential for wind turbines and electric and hybrid-electric vehicles. The approach taken is unique in the following respects: A systems approach, where Electric Machines are covered in the context of the overall drives with applications that students can appreciate and get enthusiastic about; A fundamental and physics-based approach that not only teaches the analysis of electric machines and drives, but also prepares students for learning how to control them in a graduate level course; Use of the space-vector-theory that is made easy to understand. They are introduced in this book in such a way that students can appreciate their physical basis; A unique way to describe induction machines that clearly shows how they go from the motoring-mode to the generating-mode, for example in wind and electric vehicle applications, and how they ought to be controlled for the most efficient operation.
Download or read book A Text book of Electrical Technology in S I System of Units written by A. K. Theraja and published by . This book was released on 1988 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
