Download or read book Practical Balancing of Rotating Machinery written by Derek Norfield and published by Elsevier. This book was released on 2011-04-18 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating machinery (eg pumps, motors, compressors) is normally manufactured to precise measurements but there comes a point when the costs of manufacture mean that further precision is not cost-effective and thus any slight imbalance inherent in the machine will need to be attended to after manufacture. When such machinery is in operation, often at very high speeds of thousands of revs per minute, any imbalance will set up vibration and often noise. In addition, such imbalance will cause extra wear and loss of efficiency in the machine. The answer is to balance the affected parts of the machine so that it operates smoothly and efficiently. This book is a practical account of such balancing techniques e.g how to balance a rotor, how to set up and verify performance of a balancing machine, and procedures for on-site balancing. In addition, other common causes of vibration will be covered e.g. misalignment, bad bearings and looseness. This book is the distillation of a successful course run by the author and developed over 20 years. University engineering departments do not teach balancing techniques beyond the very basic, and there is a need for educators and engineers to have a practical book available on the topic. · A practical book which will help the reader understand the importance of balance in today's high technology world · Outlines the history of dynamic balancing and other vibration reduction techniques · Profusely illustrated throughout
Download or read book Balancing of High Speed Machinery written by Mark S. Darlow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern rotating machinery, particularly turbomachinery, is frequently being designed to operate at higher speeds than in the past. Consequently, there is an increased need to balance high-speed rotors. The purpose of this book is to provide the engineering student or practicing engineer with a single, complete reference on high-speed rotor balancing. To this end, a detailed analytical background and practical application procedures are presented for each of the principal high-speed rotor balancing methods, i.e. modal balancing, influence coefficient balancing and the Unified Balancing Approach. This information is supplemented and supported through a presentation of the theoretical development of synchronous rotor vibration and a brief overview of rigid rotor balancing techniques and machines. This is the first time this material is available in a single, concise volume, together with detailed descriptions of application procedures.
Download or read book Dynamic and Static Balancing written by Edward K. Hammond and published by . This book was released on 1921 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machinery Vibration Measurement and Analysis written by Victor Wowk and published by McGraw Hill Professional. This book was released on 1991-07-22 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how to use state-of-the-art instrumentation - transducers and fast fourier transform (FFT) specturm analyzers - to monitor machine conditions using the vibration signature.
Download or read book Dynamic Balancing of Rotating Machinery written by John Bernard Wilcox and published by . This book was released on 1967 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machinery Vibration Balancing Special Reprint Edition written by Victor Wowk and published by McGraw Hill Professional. This book was released on 1998-10-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables you to measure, isolate, and reduce rotating component's vibration, resonance, or misalignment problem. This book helps you to balance everything from ceiling fans to turbine engines, and select and apply balancing sensors and systems for single-plane and two-plane balancing and overhung and flexible-rotor balancing.
Download or read book Mechanics of Machinery written by Mahmoud A. Mostafa and published by CRC Press. This book was released on 2012-11-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Machinery describes the analysis of machines, covering both the graphical and analytical methods for examining the kinematics and dynamics of mechanisms with low and high pairs. This text, developed and updated from a version published in 1973, includes analytical analysis for all topics discussed, allowing for the use of math software
Download or read book Rotating Machinery written by Robert B. McMillan and published by CRC Press. This book was released on 2020-11-26 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A theoretical and practical understanding of unbalance and misalignment in rotating equipment is presented here. These two conditions account for the vast majority of problems with rotating equipment encountered in the real world.;Numerous examples and solutions are included to assist in understanding the various concepts. Included is information on vibration and how it is used to determine the operational integrity of rotating machinery. Also detailed are the relationships between various vibration characteristics which provide an understanding of the forces generated within operating machinery when conditions of unbalance and misalignment are present. Resonance and beat frequencies are detailed along with sources and cures.;Also covered are proper inspection procedures, single plane and dual plane methods of balancing rotating equipment, the three circle method of balancing slow speed fans, advanced rim and face method of precision alignment, and the reverse indicator method of alignment plus much more to fortify the learning experience.
Download or read book Smart Devices and Machines for Advanced Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2008-02-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of quality chapters on the state-of-the-art of research efforts in the area of smart devices and novel machine design, as well as their practical applications to enable advanced manufacturing. The first section presents a broad-based review of several key areas of research in smart devices and machines. The second section is focused on presenting an in-depth treatment of a particular device or machine. The book will be of interest to a broad readership.
Download or read book Dynamics of Machinery written by Anup Goel and published by Technical Publications. This book was released on 2021-01-01 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of machinery is concerned with the motion of the parts of the machines and the forces acting on these parts. Dynamic loads and undesired oscillations increase with higher speed of machines. At the same time, industrial safety standards require better vibration isolation. This book covers balancing of mechanisms, torsion vibrations, vibration isolation and the dynamic behaviour of drives and machine frames as complex systems. Typical dynamic effects such as the gyroscopic effect, damping and absorption, shocks are explained using practical examples. The substantial benefit of this dynamics of machinery lies in the combination of theory and practical applications and the numerous descriptive examples based on practical data. Our hope is that this book, through its careful explanations of concepts, practical examples and figures bridges the gap between knowledge and proper application of that knowledge.
Download or read book Major Process Equipment Maintenance and Repair written by Heinz P. Bloch and published by Elsevier. This book was released on 1997-01-10 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition is an invaluable source of practical cost-effective maintenance, repair, installation, and field verification procedures for machinery engineers. It is filled with step-by-step instructions and quick-reference checklists that describe preventive and predictive maintenance for major process units such as vertical, horizontal, reciprocating, and liquid ring vacuum pumps, fans and blowers, compressors, turboexpanders, turbines, and more. Also included are sections on machinery protection, storage, lubrication, and periodic monitoring. A new section examines centrifugal pumps and explains how and why they continue to fail. More new information focuses on maintenance for aircraft derivative gas turbines. This revised edition gives special attention throughout to maintenance and repair procedures needed to ensure efficiency, performance, and long life.
Download or read book Theory of Machines Kinematics and Dynamics written by Sadhu Singh and published by Pearson Education India. This book was released on 2012 with total page 1393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Theory of Machines: Kinematics and Dynamics comprehensively covers theory of machines for undergraduate students of Mechanical and Civil Engineering. The main objective of the book is to present the concepts in a logical, innovative and lucid manner with easy to understand illustrations and diagrams; the book is a treasure in itself for Mechanical Engineers.
Download or read book Dynamics of Machinery written by Hans Dresig and published by Springer Science & Business Media. This book was released on 2010-07-27 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic loads and undesired oscillations increase with higher speed of machines. At the same time, industrial safety standards require better vibration reduction. This book covers model generation, parameter identification, balancing of mechanisms, torsional and bending vibrations, vibration isolation, and the dynamic behavior of drives and machine frames as complex systems. Typical dynamic effects, such as the gyroscopic effect, damping and absorption, shocks, resonances of higher order, nonlinear and self-excited vibrations are explained using practical examples. These include manipulators, flywheels, gears, mechanisms, motors, rotors, hammers, block foundations, presses, high speed spindles, cranes, and belts. Various design features, which influence the dynamic behavior, are described. The book includes 60 exercises with detailed solutions. The substantial benefit of this "Dynamics of Machinery" lies in the combination of theory and practical applications and the numerous descriptive examples based on real-world data. The book addresses graduate students as well as engineers.
Download or read book Dynamics and Balancing of Multibody Systems written by Himanshu Chaudhary and published by Springer Science & Business Media. This book was released on 2008-09-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has evolved from the passionate desire of the authors in using the modern concepts of multibody dynamics for the design improvement of the machineries used in the rural sectors of India and The World. In this connection, the first author took up his doctoral research in 2003 whose findings have resulted in this book. It is expected that such developments will lead to a new research direction MuDRA, an acronym given by the authors to “Multibody Dynamics for Rural Applications. ” The way Mu- DRA is pronounced it means ‘money’ in many Indian languages. It is hoped that practicing MuDRA will save or generate money for the rural people either by saving energy consumption of their machines or making their products cheaper to manufacture, hence, generating more money for their livelihood. In this book, the initial focus was to improve the dynamic behavior of carpet scrapping machines used to wash newly woven hand-knotted c- pets of India. However, the concepts and methodologies presented in the book are equally applicable to non-rural machineries, be they robots or - tomobiles or something else. The dynamic modeling used in this book to compute the inertia-induced and constraint forces for the carpet scrapping machine is based on the concept of the decoupled natural orthogonal c- plement (DeNOC) matrices. The concept is originally proposed by the second author for the dynamics modeling and simulation of serial and - rallel-type multibody systems, e. g.
Download or read book Rotordynamics 2 written by Neville F. Rieger and published by Springer. This book was released on 2014-05-04 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Mechanism and Machine Science written by Tadeusz Uhl and published by Springer. This book was released on 2019-06-13 with total page 4248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Advances on Analysis and Control of Vibrations written by Mauricio Zapateiro and published by BoD – Books on Demand. This book was released on 2012-09-05 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a phenomenon that we can perceive in many systems. Their effects are as diverse as the personal discomfort that can produce the unevenness of a road or the collapse of a building or a bridge during an earthquake. This book is a compendium of research works on vibration analysis and control. It goes through new methodologies that help us understand and mitigate this phenomenon. This book is divided into two sections. The first one is devoted to new advances on vibration analysis while the second part is a series of case studies that illustrate novel techniques on vibration control. The applications are varied and include areas such as vehicle suspension systems, wind turbines and civil engineering structures.
