Download or read book Axial and Radial Turbines written by Hany Moustapha and published by Concepts Eti. This book was released on 2003 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering Design and Analysis of Axlal and Radial Turbines.
Download or read book Turbine Aerodynamics written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2006 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough description of actual, working aerodynamic design and analysis systems, for both axial-flow and radial-flow turbines. It describes the basic fluid dynamic and thermodynamic principles, empirical models and numerical methods used for the full range of procedures and analytical tools that an engineer needs for virtually any type of aerodynamic design or analysis activity for both types of turbine. The book includes sufficient detail for readers to implement all or part of the systems. The author provides practical and effective design strategies for applying both turbine types, which are illustrated by design examples. Comparisons with experimental results are included to demonstrate the prediction accuracy to be expected. This book is intended for practicing engineers concerned with the design and development of turbines and related machinery.
Download or read book Axial and Radial Turbines written by Hany Mustapha and published by . This book was released on 2003 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Axial Turbine Aerodynamics for Aero engines written by Zhengping Zou and published by Springer. This book was released on 2018-01-11 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a monograph on aerodynamics of aero-engine gas turbines focusing on the new progresses on flow mechanism and design methods in the recent 20 years. Starting with basic principles in aerodynamics and thermodynamics, this book systematically expounds the recent research on mechanisms of flows in axial gas turbines, including high pressure and low pressure turbines, inter-turbine ducts and turbine rear frame ducts, and introduces the classical and innovative numerical evaluation methods in different dimensions. This book also summarizes the latest research achievements in the field of gas turbine aerodynamic design and flow control, and the multidisciplinary conjugate problems involved with gas turbines. This book should be helpful for scientific and technical staffs, college teachers, graduate students, and senior college students, who are involved in research and design of gas turbines.
Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Fundamentals of Turbomachines written by Erik Dick and published by Springer. This book was released on 2015-03-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the working principles of all kinds of turbomachines. The same theoretical framework is used to analyse the different machine types. Fundamentals are first presented and theoretical concepts are then elaborated for particular machine types, starting with the simplest ones.For each machine type, the author strikes a balance between building basic understanding and exploring knowledge of practical aspects. Readers are invited through challenging exercises to consider how the theory applies to particular cases and how it can be generalised. The book is primarily meant as a course book. It teaches fundamentals and explores applications. It will appeal to senior undergraduate and graduate students in mechanical engineering and to professional engineers seeking to understand the operation of turbomachines. Readers will gain a fundamental understanding of turbomachines. They will also be able to make a reasoned choice of turbomachine for a particular application and to understand its operation. Basic design of the simplest turbomachines as a centrifugal fan, an axial steam turbine or a centrifugal pump, is also possible using the topics covered in the book.
Download or read book Turbocharging the Internal Combustion Engine written by Neil Watson and published by . This book was released on 1982 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design of High Efficiency Turbomachinery and Gas Turbines second edition with a new preface written by David Gordon Wilson and published by MIT Press. This book was released on 2014-09-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive textbook that introduces turbomachinery and gas turbines through design methods and examples. This comprehensive textbook is unique in its design-focused approach to turbomachinery and gas turbines. It offers students and practicing engineers methods for configuring these machines to perform with the highest possible efficiency. Examples and problems are based on the actual design of turbomachinery and turbines. After an introductory chapter that outlines the goals of the book and provides definitions of terms and parts, the book offers a brief review of the basic principles of thermodynamics and efficiency definitions. The rest of the book is devoted to the analysis and design of real turbomachinery configurations and gas turbines, based on a consistent application of thermodynamic theory and a more empirical treatment of fluid dynamics that relies on the extensive use of design charts. Topics include turbine power cycles, diffusion and diffusers, the analysis and design of three-dimensional free-stream flow, and combustion systems and combustion calculations. The second edition updates every chapter, adding material on subjects that include flow correlations, energy transfer in turbomachines, and three-dimensional design. A solutions manual is available for instructors. This new MIT Press edition makes a popular text available again, with corrections and some updates, to a wide audience of students, professors, and professionals.
Download or read book Axial Flow Turbines written by J. H. Horlock and published by . This book was released on 1973 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.
Download or read book Design of Radial Turbomachines written by A. Whitfield and published by Longman. This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past three decades advances have been made in the fluid dynamic and thermodynamic design and understanding of radial flow turbomachines. Radial turbomachines possess their own distinctive characteristics, and present the engineer with as full a range of complexities as any fluid flow problem. This book describes the current technology and design methods for centrifugal compressors and radial turbines working in compressible flow. These are of particular relevance to gas turbine engines, internal combustion engine turbochargers, process compressors and cryogenic expanders. The aerodynamic design of the turbomachine is preliminary design to the specification of blade forms and computational fluid dynamic analysis of vane and blade passage flows. The treatment throughout is modern, with full recognition of current computer-aided design methods. However throughout the book a clear separation is made between the fundamental gas dynamics and the empiricism necessary to close the gap between theory and practice in situations of such complexity. Computer program listings for preliminary design are included. The problems posed by specific applications are dealt with in details: for example, techniques for the suppression of surge in centrifugal compressors and a consequent widening of the operating range, and the problems of pulse operation of radial turbines as encountered in turbocharger applications. The book contains comprehensive surveys of the literature in all these fields.
Download or read book Principles of Turbomachinery in Air Breathing Engines written by Erian A. Baskharone and published by Cambridge University Press. This book was released on 2006-07-31 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for advanced undergraduate and graduate students in mechanical and aerospace engineering taking a course commonly called Principles of Turbomachinery or Aerospace Propulsion. The book begins with a review of basic thermodynamics and fluid mechanics principles to motive their application to aerothermodynamics and real-life design issues. This approach is ideal for the reader who will face practical situations and design decisions in the gas turbine industry. The text is fully supported by over 200 figures, numerous examples, and homework problems.
Download or read book Aerodynamics of Turbines and Compressors HSA 1 Volume 1 written by William R. Hawthorne and published by Princeton University Press. This book was released on 2017-03-14 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume X of the High Speed Aerodynamics and Jet Propulsion series. Contents include: Theory of Two-Dimensional Flow through Cascades; Three-Dimensional Flow in Turbomachines; Experimental Techniques; Flow in Cascades; The Axial Compressor Stage; The Supersonic Compressor; Aerodynamic Design of Axial Flow Turbines; The Radial Turbine; The Centrifugal Compressor; Intermittent Flow Effects. Originally published in 1964. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Pounder s Marine Diesel Engines and Gas Turbines written by Doug Woodyard and published by Butterworth-Heinemann. This book was released on 2009-08-18 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its first appearance in 1950, Pounder's Marine Diesel Engines has served seagoing engineers, students of the Certificates of Competency examinations and the marine engineering industry throughout the world. Each new edition has noted the changes in engine design and the influence of new technology and economic needs on the marine diesel engine. Now in its ninth edition, Pounder's retains the directness of approach and attention to essential detail that characterized its predecessors. There are new chapters on monitoring control and HiMSEN engines as well as information on developments in electronic-controlled fuel injection. It is fully updated to cover new legislation including that on emissions and provides details on enhancing overall efficiency and cutting CO2 emissions. After experience as a seagoing engineer with the British India Steam Navigation Company, Doug Woodyard held editorial positions with the Institution of Mechanical Engineers and the Institute of Marine Engineers. He subsequently edited The Motor Ship journal for eight years before becoming a freelance editor specializing in shipping, shipbuilding and marine engineering. He is currently technical editor of Marine Propulsion and Auxiliary Machinery, a contributing editor to Speed at Sea, Shipping World and Shipbuilder and a technical press consultant to Rolls-Royce Commercial Marine. * Helps engineers to understand the latest changes to marine diesel engineers * Careful organisation of the new edition enables readers to access the information they require * Brand new chapters focus on monitoring control systems and HiMSEN engines. * Over 270 high quality, clearly labelled illustrations and figures to aid understanding and help engineers quickly identify what they need to know.
Download or read book Turbochargers written by Hugh MacInnes and published by Penguin. This book was released on 1987-01-01 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides instruction in installing turbochargers, surveys the design, manufacture, and testing of turbocharger kits, and explains the economy and other advantages of turbocharging small engines
Download or read book Computer Program for Preliminary Design Analysis of Axial flow Turbines written by Arthur J. Glassman and published by . This book was released on 1972 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The program method is based on a mean-diameter flow analysis. Input design requirements include power or pressure ratio, flow, temperature, pressure, and speed. Turbine designs are generated for any specified number of stages and for any of three types of velocity diagrams (symmetrical, zero exit swirl, or impulse). Exit turning vanes can be included in the design. Program output includes inlet and exit annulus dimensions, exit temperature and pressure, total and static efficiencies, blading angles, and last-stage critical velocity ratios. The report presents the analysis method, a description of input and output with sample cases, and the program listing.
