Download or read book Aviation Safety and Automation Implications written by Richard H. Green and published by . This book was released on 2023-12-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research study evaluates the role of policy regarding the use of automation in flight on the safety of aviation in the United States. Specifically, following the investigation of several high-profile aircraft mishaps that identified misuse or overuse of automation at inappropriate times during flight, several best practices have developed among airline operators as to the acceptable use of flight automation. However, there has never been a coordinated governmental policy on the use of automated equipment, procedures, or communication promulgated by the Federal Aviation Administration (FAA), the International Civil Aviation Organisation (CIAO), or industry work groups. While there has been considerable research among social scientists on the impact of human error and misunderstanding on automated systems, and while great progress has been made in the area of human factor consideration in designing air planes and the systems used to control them, there has been little research on the public policy aspect of these considerations. Even though the FAA has established a research group specifically dedicated to the impact of human factor considerations on flying (Chandra & Gray hem, 2012), there has been no subsequent discussion on the policy changes those results should dictate.

Download or read book Report of the Workshop on Aviation Safety Automation Program written by and published by . This book was released on 1990 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aircraft Technology written by Melih Kushan and published by BoD – Books on Demand. This book was released on 2018-09-12 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well known that improvements in space and aviation are the leader of today's technology, and the aircraft is the most important product of aviation. Because of this fact, the books on aircraft are always at the center of interest. In most cases, technologies designed for the aerospace industry are rapidly extending into other areas. For example, although composite materials are developed for the aerospace industry, these materials are not often used in aircraft. However, composite materials are utilized significantly in many different sectors, such as automotive, marine and civil engineering. And materials science in aviation, reliability and efficiency in aircraft technology have a major importance in aircraft design.

Download or read book The Highly Automated Airplane written by Kuo Kuang Liu and published by . This book was released on 1997-06-01 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two Airbus accidents at Nagoya, Japan and Toulouse, France in April and June 1994 highlighted the problem of the highly-automated airplane and its interface with pilots. As technologies in the engineering design progress so quickly in airplane automation, training philosophies toward the 'glass cockpit' may need to be re-evaluated. Many pilots, young and old, praise the advantages brought by the new technology. On the other hand, many have complained about the increasing workload and the danger of automation features which are not in their control. In this thesis, I evaluate the accidents of the highly-automated airplane and the probable solutions which can be applied in the training phase to reduce the accident rates. The training philosophies given to the crewmembers remaining in the cockpit of highly-automated airplanes should guarantee flying safety with limited time and resources in the absence of rigorous regulations. Air transportation surely is the most popular business today and in the future. The machine has been updated to include more automatic controls. Now our concern is to upgrade the human capability to stay abreast of technology and keep flying safe. That is the reason for this thesis, whose contribution to aviation safety is to recommend adequate training philosophies for highly-automated airplane users.

Download or read book Automation and Systems Issues in Air Traffic Control written by John A. Wise and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, increases in the amount and changes in the distribution of air traffic have been very dramatic and are continuing. The need for changes in the current air traffic systems is equally clear. While automation is generally accepted as a method of improving system safety and performance, high levels of automation in complex human-machine systems can have a negative effect on total system performance and have been identified as contributing factors in many accidents and failures. Those responsible for designing the advanced air traffic control systems to be implemented throughout the alliance during the next decade need to be aware of recent progress concerning the most effective application of automation and artificial intelligence in human-computer systems. This volume gives the proceedings of the NATO Advanced Study Institute held in Maratea, Italy, June 18-29, 1990, at which these issues were discussed.

Download or read book Cockpit Automation Flight Systems Complexity and Aircraft Certification written by Bart Elias and published by . This book was released on 2019-10-20 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing complexity and automation of flight control systems pose a challenge to federal policy regarding aircraft certification and pilot training. Despite significant commercial aviation safety improvements over the past two decades, flight control automation and aircraft complexity have been cited as contributing factors in a number of major airline accidents, including two high-profile crashes overseas involving the recently introduced Boeing 737 Max variant in 2018 and 2019. These crashes have directed attention to Federal Aviation Administration (FAA) oversight of aircraft type certification and pilot training practices for transport category aircraft, particularly as they pertain to complex automated flight control systems. As aircraft systems have evolved over the past three decades to incorporate new technologies, Congress has mandated FAA to streamline certification processes, with the primary motivation being to facilitate the development of new safety-enhancing technologies. Modern commercial aircraft rely on "fly-by-wire" flight control technologies, under which pilots' flight control inputs are sent to computers rather than through direct mechanical linkages to flight control systems. The fly-by-wire software contains flight control laws and logic that, in addition to optimizing performance efficiency, protect the aircraft from commanded actions that could put the airplane in an unsafe state. Automated flight control systems have largely been viewed as having a positive effect on safety, and accident rates have improved considerably over the past two decades. However, the increasing complexity of automated flight systems has sometimes caused confusion and uncertainty, contributing to improper pilot actions during critical phases of flight and in some cases leading pilots to unintentionally place an aircraft in an unsafe condition. Besides designing these systems in a manner that minimizes pilot errors and the consequences of those errors, aircraft designers and operators face challenges regarding maintaining piloting skills for flight crews to be able to take over and manually fly the aircraft safely if critical systems fail. They also face challenges regarding documentation and pilot training effectiveness in building accurate mental models of how these complex systems operate. The primary goals of ongoing efforts to address these challenges are to enhance pilot situation awareness when using automation and reduce the likelihood of mode errors and confusion, while at the same time not overburdening pilots with intricate systems knowledge beyond what is necessary. In the ongoing investigations of two Boeing 737 Max crashes, Lion Air flight 610 and Ethiopian Airlines flight 302, concerns have been raised about the design of an automated feature called the Maneuvering Characteristics Augmentation System (MCAS) and its reliance on a single angle-of-attack sensor even though the aircraft is equipped with two such sensors. These concerns led to the worldwide grounding of all Boeing 737 Max aircraft until the MCAS safety concerns can be resolved, significantly impacting both U.S. and foreign airlines that operate the aircraft. These recent aviation accidents have prompted reviews of the manner in which modern transport category aircraft are certified by FAA and its foreign counterparts, and in particular, the roles of regulators and manufacturers in the certification process. The challenges of certifying increasingly complex aircraft are largely being met by delegating more of FAA's certification functions to aircraft designers and manufacturers. This raises potential conflicts between safety and quality assurance on the one hand and competitive pressures to market and deliver aircraft on the other. Under Organization Designation Authorization (ODA), FAA can designate companies to carry out delegated certification functions on its behalf.

Download or read book The Dangers of Automation in Airliners written by Jack J. Hersch and published by Air World. This book was released on 2020-11-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The award-winning journalist delves “into the confluence of modern airplane technology and pilot behavior to probe how and why flight disasters happen” (BookTrib). Aviation automation has been pushed to its limits, with pilots increasingly relying on it. Autopilot, autothrottle, autoland, flight management systems, air data systems, inertial guidance systems. All these systems are only as good as their inputs which, incredibly, can go rogue. Even the automation itself is subject to unpredictable failure. And what of the pilots? They began flight training with their hands on the throttle and yoke, and feet on the rudder pedals. Then they reached the pinnacle of their careers—airline pilot—and suddenly they were going hours without touching the controls other than for a few minutes on takeoff and landing. Are their skills eroding? Is their training sufficient to meet the demands of today’s planes? The Dangers of Automation in Airliners delves deeply into these questions. You’ll be in the cockpits of the two doomed Boeing 737 MAXs, the Airbus A330 lost over the South Atlantic, and the Bombardier Q400 that stalled over Buffalo. You’ll discover exactly why a Boeing 777 smacked into a seawall, missing the runway on a beautiful summer morning. And you’ll watch pilots battling—sometimes winning and sometimes not—against automation run amok. This book also investigates the human factors at work. You’ll learn why pilots might overlook warnings or ignore cockpit alarms. You’ll observe automation failing to alert aircrews of what they crucially need to know while fighting to save their planes and their passengers. The future of safe air travel depends on automation. This book tells its story.

Download or read book Aviation Safety Human Factors System Engineering Flight Operations Economics Strategies Management written by Hans M. Soekkha and published by CRC Press. This book was released on 2020-03-26 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Questions concerning safety in aviation attract a great deal of attention, due to the growth in this industry and the number of fatal accidents in recent years. The aerospace industry has always been deeply concerned with the permanent prevention of accidents and the conscientious safeguarding of all imaginable critical factors surrounding the organization of processes in aeronautical technology. However, the developments in aircraft technology and control systems require further improvements to meet future safety demands. This book embodies the proceedings of the 1997 International Aviation Safety Conference, and contains 60 talks by internationally recognized experts on various aspects of aviation safety. Subjects covered include: Human interfaces and man-machine interactions; Flight safety engineering and operational control systems; Aircraft development and integrated safety designs; Safety strategies relating to risk insurance and economics; Corporate aspects and safety management factors --- including airlines services and airport security environment.

Download or read book Automation and Human Performance written by Raja Parasuraman and published by CRC Press. This book was released on 2018-01-29 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is perhaps no facet of modern society where the influence of computer automation has not been felt. Flight management systems for pilots, diagnostic and surgical aids for physicians, navigational displays for drivers, and decision-aiding systems for air-traffic controllers, represent only a few of the numerous domains in which powerful new automation technologies have been introduced. The benefits that have been reaped from this technological revolution have been many. At the same time, automation has not always worked as planned by designers, and many problems have arisen--from minor inefficiencies of operation to large-scale, catastrophic accidents. Understanding how humans interact with automation is vital for the successful design of new automated systems that are both safe and efficient. The influence of automation technology on human performance has often been investigated in a fragmentary, isolated manner, with investigators conducting disconnected studies in different domains. There has been little contact between these endeavors, although principles gleaned from one domain may have implications for another. Also, with a few exceptions, the research has tended to be empirical and only theory-driven. In recent years, however, various groups of investigators have begun to examine human performance in automated systems in general and to develop theories of human interaction with automation technology. This book presents the current theories and assesses the impact of automation on different aspects of human performance. Both basic and applied research is presented to highlight the general principles of human-computer interaction in several domains where automation technologies are widely implemented. The major premise is that a broad-based, theory-driven approach will have significant implications for the effective design of both current and future automation technologies. This volume will be of considerable value to researchers in human

Download or read book Autonomy Research for Civil Aviation written by National Research Council and published by National Academies Press. This book was released on 2014-07-23 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development and application of increasingly autonomous (IA) systems for civil aviation is proceeding at an accelerating pace, driven by the expectation that such systems will return significant benefits in terms of safety, reliability, efficiency, affordability, and/or previously unattainable mission capabilities. IA systems range from current automatic systems such as autopilots and remotely piloted unmanned aircraft to more highly sophisticated systems that are needed to enable a fully autonomous aircraft that does not require a pilot or human air traffic controllers. These systems, characterized by their ability to perform more complex mission-related tasks with substantially less human intervention for more extended periods of time, sometimes at remote distances, are being envisioned for aircraft and for air traffic management and other ground-based elements of the national airspace system. Civil aviation is on the threshold of potentially revolutionary improvements in aviation capabilities and operations associated with IA systems. These systems, however, face substantial barriers to integration into the national airspace system without degrading its safety or efficiency. Autonomy Research for Civil Aviation identifies key barriers and suggests major elements of a national research agenda to address those barriers and help realize the benefits that IA systems can make to crewed aircraft, unmanned aircraft systems, and ground-based elements of the national airspace system. This report develops a set of integrated and comprehensive technical goals and objectives of importance to the civil aeronautics community and the nation. Autonomy Research for Civil Aviation will be of interest to U.S. research organizations, industry, and academia who have a role in meeting these goals.

Download or read book Aviation safety and automation technology for subsonic transports written by and published by DIANE Publishing. This book was released on with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Improving Air Safety through Organizational Learning written by José Sánchez-Alarcos Ballesteros and published by Routledge. This book was released on 2016-05-13 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key theme of this book is organizational learning and its consequences for the field of aviation safety. Air safety rates have been improving for a long time, demonstrating the effects of a good learning model at work. However, the pace of improvement has almost come to a standstill. Why is this? Many safety improvements have been embodied in technology. New devices and procedures appear almost daily, yet the rate of air safety improvement has dragged in recent years. Improving Air Safety through Organizational Learning explains this situation as being the consequence of a development model supported chiefly by information technology being introduced as an alternative to human operators. This is not a book about the convenience of including or not including IT in aviation, but an open discussion about the adequacy and risks of some practices in the field. Two different but complementary issues emerge. Firstly, a real improvement in air safety requires a different approach, since the present one seems now to be exhausted. Secondly, the current approach has powerful economic roots, and any new approach must deal with this fact, improving safety rates without becoming financially damaging. Consequently the book is divided into two parts. Part one deals with the issue of the present learning model organizing the conclusions around accident reports that show themselves the existence of a problem: the present use of technology makes the system better at doing things already known, while at the same time it makes the whole system worse at dealing with unplanned situations. Part two suggests a new development model, one that makes strong use of technology but at the same time questions every step: what knowledge will disappear from the system and what is the potential effect of that loss?

Download or read book Commercial Aviation Safety Sixth Edition written by Stephen K. Cusick and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-To-Date Coverage of Every Aspect of Commercial Aviation Safety Completely revised edition to fully align with current U.S. and international regulations, this hands-on resource clearly explains the principles and practices of commercial aviation safety—from accident investigations to Safety Management Systems. Commercial Aviation Safety, Sixth Edition, delivers authoritative information on today's risk management on the ground and in the air. The book offers the latest procedures, flight technologies, and accident statistics. You will learn about new and evolving challenges, such as lasers, drones (unmanned aerial vehicles), cyberattacks, aircraft icing, and software bugs. Chapter outlines, review questions, and real-world incident examples are featured throughout. Coverage includes: • ICAO, FAA, EPA, TSA, and OSHA regulations • NTSB and ICAO accident investigation processes • Recording and reporting of safety data • U.S. and international aviation accident statistics • Accident causation models • The Human Factors Analysis and Classification System (HFACS) • Crew Resource Management (CRM) and Threat and Error Management (TEM) • Aviation Safety Reporting System (ASRS) and Flight Data Monitoring (FDM) • Aircraft and air traffic control technologies and safety systems • Airport safety, including runway incursions • Aviation security, including the threats of intentional harm and terrorism • International and U.S. Aviation Safety Management Systems

Download or read book Aviation Automation written by Charles E. Billings and published by CRC Press. This book was released on 2018-01-29 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of very compact, very powerful digital computers has made it possible to automate a great many processes that formerly required large, complex machinery. Digital computers have made possible revolutionary changes in industry, commerce, and transportation. This book, an expansion and revision of the author's earlier technical papers on this subject, describes the development of automation in aircraft and in the aviation system, its likely evolution in the future, and the effects that these technologies have had -- and will have -- on the human operators and managers of the system. It suggests concepts that may be able to enhance human-machine relationships in future systems. The author focuses on the ability of human operators to work cooperatively with the constellation of machines they command and control, because it is the interactions among these system elements that result in the system's success or failure, whether in aviation or elsewhere. Aviation automation has provided great social and technological benefits, but these benefits have not come without cost. In recent years, new problems in aircraft have emerged due to failures in the human-machine relationship. These incidents and accidents have motivated this inquiry into aviation automation. Similar problems in the air traffic management system are predicted as it becomes more fully automated. In particular, incidents and accidents have occurred which suggest that the principle problems with today's aviation automation are associated with its complexity, coupling, autonomy, and opacity. These problems are not unique to aviation; they exist in other highly dynamic domains as well. The author suggests that a different approach to automation -- called "human-centered automation" -- offers potential benefits for system performance by enabling a more cooperative human-machine relationship in the control and management of aircraft and air traffic.

Download or read book A Method for Evaluating the Safety Impacts of Air Traffic Automation written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-02 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes a methodology for analyzing the safety and operational impacts of emerging air traffic technologies. The approach integrates traditional reliability models of the system infrastructure with models that analyze the environment within which the system operates, and models of how the system responds to different scenarios. Products of the analysis include safety measures such as predicted incident rates, predicted accident statistics, and false alarm rates; and operational availability data. The report demonstrates the methodology with an analysis of the operation of the Center-TRACON Automation System at Dallas-Fort Worth International Airport. Kostiuk, Peter and Shapiro, Gerald and Hanson, Dave and Kolitz, Stephan and Leong, Frank and Rosch, Gene and Bonesteel, Charles Ames Research Center...

Download or read book Advances in Human Aspects of Aviation written by Steven J. Landry and published by CRC Press. This book was released on 2012-07-11 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the very earliest years of aviation, it was clear that human factors were critical to the success and safety of the system. As aviation has matured, the system has become extremely complex. Bringing together the most recent human factors work in the aviation domain, Advances in Human Aspects of Aviation covers the design of aircrafts for the comfort and well being of the passenger. The book discusses strategies and guidelines for maximizing comfort, the design of aircrafts including cockpit design, and the training and work schedules for flight attendants and pilots. It is becoming increasingly important to view problems not as isolated issues that can be extracted from the system environment, but as embedded issues that can only be understood as a part of an overall system. In keeping with a system that is vast in its scope and reach, the chapters in this book cover a wide range of topics, including: Interface and operations issues from the perspectives of pilots and air traffic controllers, respectively. Specific human performance issues, studied from within the context of the air transportation system Issues related to automation and the delineation of function between automation and human within the current and future system The U.S. air traffic modernization effort, called NextGen Diverse modeling perspectives and methods Safety and ethics as driving factors for change Cognition and work overload Empirical research and evaluation of the air transportation domain As air traffic modernization efforts begin to vastly increase the capacity of the system, the issues facing engineers, scientists, and other practitioners of human factors are becoming more challenging and more critical. Reflecting road themes and trends in this field, the book documents the latest research in this area.

Download or read book The Future of Air Traffic Control written by National Research Council and published by National Academies Press. This book was released on 1998-01-26 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation in air traffic control may increase efficiency, but it also raises questions about adequate human control over automated systems. Following on the panel's first volume on air traffic control automation, Flight to the Future (NRC, 1997), this book focuses on the interaction of pilots and air traffic controllers, with a growing network of automated functions in the airspace system. The panel offers recommendations for development of human-centered automation, addressing key areas such as providing levels of automation that are appropriate to levels of risk, examining procedures for recovery from emergencies, free flight versus ground-based authority, and more. The book explores ways in which technology can build on human strengths and compensate for human vulnerabilities, minimizing both mistrust of automation and complacency about its abilities. The panel presents an overview of emerging technologies and trends toward automation within the national airspace systemâ€"in areas such as global positioning and other aspects of surveillance, flight information provided to pilots an controllers, collision avoidance, strategic long-term planning, and systems for training and maintenance. The book examines how to achieve better integration of research and development, including the importance of user involvement in air traffic control. It also discusses how to harmonize the wide range of functions in the national airspace system, with a detailed review of the free flight initiative.