Download or read book Automotive Gear Lubricants for Commercial and Military Use written by Fuels and Lubricants TC 3 Driveline and Chassis Lubrication and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gear lubricants covered by this standard exceed American Petroleum Institute (API) Service Classification API GL-5 and are intended for hypoid-type, automotive gear units, operating under conditions of high-speed/shock load and low-speed/high-torque. These lubricants may be appropriate for other gear applications where the position of the shafts relative to each other and the type of gear flank contact involve a large percentage of sliding contact. Such applications typically require extreme pressure (EP) additives to prevent the adhesion and subsequent tearing away of material from the loaded gear flanks. These lubricants are not appropriate for the lubrication of worm gears.Appendix A is a mandatory part of this standard. The information contained in Appendix A is intended for the demonstration of compliance with the requirements of this standard and for listing on the Qualified Products List (QPL) administered by the Lubricant Review Institute (LRI). Appendix A contains a summary of key qualification requirements. A complete listing of qualification requirements and procedures can be found in the Program Document (PD4000), Gear Lubricant Review Program, available on the Performance Review Institute (PRI) website, www.p-r-i.org. This SAE J2360 standard has been revised to incorporate three additional requirements for gear lubricants intended for military procurement and use. These requirements have been placed in Appendix A.1 and are not compulsory for commercial gear lubricants covered by this standard. This revision also includes an update to the review cirteria for ASTM D7038 (L-33-1 Test) which the LRI Review Committee has been using for Qualified Products List (QPL) approvals since 2018.
Download or read book Lubrication Fundamentals Revised and Expanded written by Don M. Pirro and published by CRC Press. This book was released on 2017-07-31 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Careful selection of the right lubricant(s) is required to keep a machine running smoothly. Lubrication Fundamentals, Third Edition, Revised and Expanded describes the need and design for the many specialized oils and greases used to lubricate machine elements and builds on the tribology and lubrication basics discussed in previous editions. Utilizing knowledge from leading experts in the field, the third edition covers new lubrication requirements, crude oil composition and selection, base stock manufacture, lubricant formulation and evaluation, machinery and lubrication fundamentals, and environmental stewardship. The book combines lubrication theory with practical knowledge, and provides many useful illustrations to highlight key industrial, commercial, marine, aviation, and automotive lubricant applications and concepts. All previous edition chapters have been updated to include new technologies, applications, and specifications that have been introduced in the past 15 years. What’s New in the Third Edition: Adds three new chapters on the growing renewable energy application of wind turbines, the impact of lubricants on energy efficiency, and best practice guidelines on establishing an in-service lubricant analysis program Updates API, SAE, and ACEA engine oil specifications, descriptions of new engine oil tests, impact of engine and fuel technology trends on engine oil Includes the latest environmental lubricant tests, definitions, and labelling programs Compiles expert information from ExxonMobil publications and the foremost international equipment builders and industry associations Covers key influences impacting lubricant formulations and technology Offers data on global energy demand and interesting statistics such as the worldwide population of nuclear reactors, wind turbines, and output of hydraulic turbines Presents new sections on the history of synthetic lubricants and hazardous chemical labeling for lubricants Whether used as a training guide for industry novices, a textbook for students to understand lubrication principles, or a technical reference for experienced lubrication and tribology professionals, Lubrication Fundamentals, Third Edition, Revised and Expanded is a "must read" for maintenance professionals, lubricant formulators and marketers, chemists, and lubrication, surface, chemical, mechanical, and automotive engineers.
Download or read book Lubricating Oil Gear Multipurpose Metric Military Use written by Fuels and Lubricants TC 3 Driveline and Chassis Lubrication and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard covers multipurpose gear lubricating military oils (see 6.1). This document is equivalent to MIL-PRF-2105 when all requirements are met.
Download or read book The Performance of Mil L 2105B Gear Oils in Military Equipment written by C. F. Schwarz and published by . This book was released on 1963 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 15 years the Army has been very active in the field of extremepressure gear lubricants. The requirements of military ground vehicles cover a broad range, from passenger cars through the heaviest types of both over-the-highway and cross-country or off-road vehicles. The need for simplified logistics dictates that, where possible, a single, multipurpose gear oil should be used in all types of gear boxes and rear axles where extreme-pressure properties are normally required. This paper reviews the progress that has been made to achieve this goal.
Download or read book Investigating Automotive Gear Lubricant Copper Corrosivity written by and published by . This book was released on 1973 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation was initiated to identify relationships between copper strip ratings and organic acidity/alkalinity values for gear oils meeting both military and commercial factory-fill specifications. No correlation was found to exist between organic acidity and copper strip ratings. As no other trends were evidenced, further modifications to the D130 technique were considered in an attempt to define gear oil corrosivity towards other ferrous and non-ferrous materials.
Download or read book Laboratory Performance Tests for Automotive Gear Lubricants Intended for API GL 5 Service written by and published by ASTM International. This book was released on 1987 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laboratory Performance Tests for Automotive Gear Lubricants Intended for API GL 4 GL 5 and GL 6 Services written by ASTM Committee D-2 Staff and published by . This book was released on 1972-01-01 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubricating Oil Automotive Engine Api Service Sm for Military Administrative Service written by Fuels and Lubricants TC 1 Engine Lubrication and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard describes lubricating oils meeting the API SJ performance category, SAE J300, the International Lubricant Standardization and Approval Committee (ILSAC) GF-2 Standard, and bear the API Certification Mark (starburst symbol) in accordance with API 1509. These oils are suitable for the lubrication of spark-ignition engines (gasoline engines). This document is equivalent to the military's Commercial Item Description A-A-52039 when all requirements are met.
Download or read book Fuels and Lubricants Handbook written by and published by ASTM International. This book was released on with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Symposium on Lubricants for Automotive Equipment written by and published by ASTM International. This book was released on 1963 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthetic Lubricants And High Performance Functional Fluids Revised And Expanded written by Leslie R. Rudnick and published by CRC Press. This book was released on 1999-03-10 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers state-of-the-art information on all the major synthetic fluids, describing established products as well as highly promising experimental fluids with commercial potential. This second edition contains chapters on polyinternalolefins, polymer esters, refrigeration lubes, polyphenyl ethers, highly refined mineral oils, automotive gear oils and industrial gear oils. The book also assesses automotive, industrial, aerospace, environmental, and commercial trends in Europe, Asia, South America, and the US.
Download or read book Military Engine Oils as Hydraulic Power Transmission Fluids in Army Commercial Construction Equipment written by H. W Marbach (Jr) and published by . This book was released on 1979 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1971, the Army adopted a policy of procuring commercial-type construction and other off-highway equipment, referred to as CCE. With this equipment comes the equipment builder's warranty which requires use of hydraulic power transmission fluid (HPTF) which meets his specification. The fact that many different equipment suppliers will ultimately furnish their products to the military under this arrangement leads to the possible proliferation of proprietary fluids in the government supply system. To counteract this possibility, and hopefully eliminate such proprietary fluids, MERADCOM/AFLRL undertook an extensive experimental program aimed at determining the feasibility of using existing government-stocked lubricants in CCE HPTF systems. Fourteen test oils were compared against the John Deere proprietary reference oil in laboratory bench, wet-brake, and full-scale wear tests. Lubricants included nine qualified Military Specification engine oils, three commercial automatic transmission fluids (ATF), and two commercial type tractor hydraulic fluids. The military specification automotive engine lubricants, namely MIL-L-2104C OE/HDO-10, MIL-L-46167 OEA, and MIL-L-46152 grade 10W-30 proved to be equal or better in regards to gear wear than the John Deere proprietary fluid.
Download or read book Synthetics Mineral Oils and Bio Based Lubricants written by Leslie R. Rudnick and published by CRC Press. This book was released on 2013-02-04 with total page 1037 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the major economic and industrial changes in the lubrication industry since the first edition, Synthetics, Mineral Oils, and Bio-Based Lubricants, Second Edition outlines the state of the art in each major lubricant application area. Chapters cover trends in the major industries, such as the use of lubricant fluids, growth or decline of market areas and applications, potential new applications, production capacities, and regulatory issues, including biodegradability, toxicity, and food production equipment lubrication. In a single, unique volume, Synthetics, Mineral Oils, and Bio-Based Lubricants, Second Edition offers property and performance information of fluids, theoretical and practical background to their current applications, and strong indicators for global market trends that will influence the industry for years to come.
Download or read book The Code of Federal Regulations of the United States of America written by and published by . This book was released on 1963 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Code of Federal Regulations is the codification of the general and permanent rules published in the Federal Register by the executive departments and agencies of the Federal Government.
Download or read book Army R D A written by and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthetic Automotive Gear Lubricants written by W. F. Olszewski and published by . This book was released on 1988 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Lubrication written by United States. War Department and published by . This book was released on 1940 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
