Download or read book Tiger Check written by Steven A. Fino and published by JHU Press. This book was released on 2017-11 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The fielding of automated flight controls and weapons systems in fighter aircraft from 1950 to 1980 challenged the significance ascribed to several of the pilots' historical skillsets, such as superb hand-eye coordination--required for aggressive stick-and-rudder maneuvering--and perfect eyesight and crack marksmanship--required for long-range visual detection and destruction of the enemy. Highly automated systems would, proponents argued, simplify the pilot's tasks while increasing his lethality in the air, thereby opening fighter aviation to broader segments of the population. However, these new systems often required new, unique skills, which the pilots struggled to identify and develop. Moreover, the challenges that accompanied these technologies were not restricted to individual fighter cockpits, but rather extended across the pilots' tactical formations, altering the social norms that had governed the fighter pilot profession since its establishment. In the end, the skills that made a fighter pilot great in 1980 bore little resemblance to those of even thirty years prior, despite the precepts embedded within the "myth of the fighter pilot." As such, this history illuminates the rich interaction between human and machine that often accompanies automation in the workplace. It is broadly applicable to other enterprises confronting increased automation, from remotely piloted aviation to Google cars. It should appeal to those interested in the history of technology and automation, as well as the general population of military aviation enthusiasts."--Provided by publisher.
Download or read book Automated Systems in the Aviation and Aerospace Industries written by Shmelova, Tetiana and published by IGI Global. This book was released on 2019-03-22 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air traffic controllers need advanced information and automated systems to provide a safe environment for everyone traveling by plane. One of the primary challenges in developing training for automated systems is to determine how much a trainee will need to know about the underlying technologies to use automation safely and efficiently. To ensure safety and success, task analysis techniques should be used as the basis of the design for training in automated systems in the aviation and aerospace industries. Automated Systems in the Aviation and Aerospace Industries is a pivotal reference source that provides vital research on the application of underlying technologies used to enforce automation safety and efficiency. While highlighting topics such as expert systems, text mining, and human-machine interface, this publication explores the concept of constructing navigation algorithms, based on the use of video information and the methods of the estimation of the availability and accuracy parameters of satellite navigation. This book is ideal for aviation professionals, researchers, and managers seeking current research on information technology used to reduce the risk involved in aviation.
Download or read book Systems Experts and Computers written by Agatha C. Hughes and published by MIT Press. This book was released on 2011-01-21 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book charts the origins and spread of the systems movement. After World War II, a systems approach to solving complex problems and managing complex systems came into vogue among engineers, scientists, and managers, fostered in part by the diffusion of digital computing power. Enthusiasm for the approach peaked during the Johnson administration, when it was applied to everything from military command and control systems to poverty in American cities. Although its failure in the social sphere, coupled with increasing skepticism about the role of technology and "experts" in American society, led to a retrenchment, systems methods are still part of modern managerial practice. This groundbreaking book charts the origins and spread of the systems movement. It describes the major players including RAND, MITRE, Ramo-Wooldrige (later TRW), and the International Institute of Applied Systems Analysis—and examines applications in a wide variety of military, government, civil, and engineering settings. The book is international in scope, describing the spread of systems thinking in France and Sweden. The story it tells helps to explain engineering thought and managerial practice during the last sixty years.
Download or read book Operations ADP 3 0 written by Headquarters Department of the Army and published by Lulu.com. This book was released on 2019-09-27 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: ADP 3-0, Operations, constitutes the Army's view of how to conduct prompt and sustained operations across multiple domains, and it sets the foundation for developing other principles, tactics, techniques, and procedures detailed in subordinate doctrine publications. It articulates the Army's operational doctrine for unified land operations. ADP 3-0 accounts for the uncertainty of operations and recognizes that a military operation is a human undertaking. Additionally, this publication is the foundation for training and Army education system curricula related to unified land operations. The principal audience for ADP 3-0 is all members of the profession of arms. Commanders and staffs of Army headquarters serving as joint task force (JTF) or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will use this publication as well.
Download or read book Automation and Human Performance written by Raja Parasuraman and published by CRC Press. This book was released on 2018-01-29 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is perhaps no facet of modern society where the influence of computer automation has not been felt. Flight management systems for pilots, diagnostic and surgical aids for physicians, navigational displays for drivers, and decision-aiding systems for air-traffic controllers, represent only a few of the numerous domains in which powerful new automation technologies have been introduced. The benefits that have been reaped from this technological revolution have been many. At the same time, automation has not always worked as planned by designers, and many problems have arisen--from minor inefficiencies of operation to large-scale, catastrophic accidents. Understanding how humans interact with automation is vital for the successful design of new automated systems that are both safe and efficient. The influence of automation technology on human performance has often been investigated in a fragmentary, isolated manner, with investigators conducting disconnected studies in different domains. There has been little contact between these endeavors, although principles gleaned from one domain may have implications for another. Also, with a few exceptions, the research has tended to be empirical and only theory-driven. In recent years, however, various groups of investigators have begun to examine human performance in automated systems in general and to develop theories of human interaction with automation technology. This book presents the current theories and assesses the impact of automation on different aspects of human performance. Both basic and applied research is presented to highlight the general principles of human-computer interaction in several domains where automation technologies are widely implemented. The major premise is that a broad-based, theory-driven approach will have significant implications for the effective design of both current and future automation technologies. This volume will be of considerable value to researchers in human
Download or read book Human centered Aircraft Automation A Concept and Guidelines written by Charles E. Billings and published by . This book was released on 1991 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by . This book was released on 1998 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of this this flight stability and controls guide features an unintimidating math level, full coverage of terminology, and expanded discussions of classical to modern control theory and autopilot designs. Extensive examples, problems, and historical notes, make this concise book a vital addition to the engineer's library.
Download or read book Enabling Automation of Composite Manufacturing through the Use of Off The Shelf Solutions written by Andreas Björnsson and published by Linköping University Electronic Press. This book was released on 2014-11-10 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials offer an appealing combination of low weight and high strength that is especially sought after in high-performance applications. The use of composite materials has and is continuing to increase, and the use of the material has been shown to provide substantial weight savings in for example aircraft design. With an increased use of composite materials follows an increased demand for cost-efficient manufacturing methods. Composite products are in many cases manufactured either by manual operations or by the use of complex automated solutions associated with high investment costs. The objective for this research is to explore an approach to develop automated composite manufacturing based on commercially available off-the-shelf solutions as an alternative to the existing automated solutions for composite manufacturing. The research, which was carried out in collaboration with industrial partners within the aerospace sector, is based on a demonstrator-centered research approach. Three conceptual demonstrators, focusing on three different manufacturing methods and a number of physical demonstrators, are used to show that off-the-shelf solutions can be used for automated manufacturing of composite products. Two aspects that affect if it is possible to use off-the-shelf solutions for automated composite manufacturing are the rigorous quality standards used by the aerospace industry and the great variety in product properties and material properties that is associated with composite manufacturing. The advantages in using off-the-shelf solutions has shown to be that the solutions generally are associated with low investments and that published information about the solutions, and the solutions themselves, is generally available for evaluation and testing. When working with the demonstrators it has been shown to be useful to break down a manufacturing system into basic tasks and consider off-the-shelf solutions for each particular task. This approach facilitates the search for a suitable off-the-shelf solution to solve a particular task. However, each of the separate tasks can affect other areas of the manufacturing system, and an overall systems perspective is required to find solutions that are compatible with the entire manufacturing system.
Download or read book Interfaces for Ground and Air Military Robots written by National Research Council and published by National Academies Press. This book was released on 2005-03-21 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early years of robotics and automated vehicles, the fight was against nature and not against a manifestly intelligent opponent. In military environments, however, where prediction and anticipation are complicated by the existence of an intelligent adversary, it is essential to retain human operators in the control loop. Future combat systems will require operators to control and monitor aerial and ground robotic systems and to act as part of larger teams coordinating diverse robotic systems over multiple echelons. The National Research Council organized a workshop to identify the most important human-related research and design issues from both the engineering and human factors perspectives, and develop a list of fruitful research directions. Interfaces for Ground and Air Military Robots summarizes the presentations and discussions from this workshop.
Download or read book The Dangers of Automation in Airliners written by Jack J. Hersch and published by Air World. This book was released on 2020-11-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The award-winning journalist delves “into the confluence of modern airplane technology and pilot behavior to probe how and why flight disasters happen” (BookTrib). Aviation automation has been pushed to its limits, with pilots increasingly relying on it. Autopilot, autothrottle, autoland, flight management systems, air data systems, inertial guidance systems. All these systems are only as good as their inputs which, incredibly, can go rogue. Even the automation itself is subject to unpredictable failure. And what of the pilots? They began flight training with their hands on the throttle and yoke, and feet on the rudder pedals. Then they reached the pinnacle of their careers—airline pilot—and suddenly they were going hours without touching the controls other than for a few minutes on takeoff and landing. Are their skills eroding? Is their training sufficient to meet the demands of today’s planes? The Dangers of Automation in Airliners delves deeply into these questions. You’ll be in the cockpits of the two doomed Boeing 737 MAXs, the Airbus A330 lost over the South Atlantic, and the Bombardier Q400 that stalled over Buffalo. You’ll discover exactly why a Boeing 777 smacked into a seawall, missing the runway on a beautiful summer morning. And you’ll watch pilots battling—sometimes winning and sometimes not—against automation run amok. This book also investigates the human factors at work. You’ll learn why pilots might overlook warnings or ignore cockpit alarms. You’ll observe automation failing to alert aircrews of what they crucially need to know while fighting to save their planes and their passengers. The future of safe air travel depends on automation. This book tells its story.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Army of None Autonomous Weapons and the Future of War written by Paul Scharre and published by W. W. Norton & Company. This book was released on 2018-04-24 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the 2019 William E. Colby Award "The book I had been waiting for. I can't recommend it highly enough." —Bill Gates The era of autonomous weapons has arrived. Today around the globe, at least thirty nations have weapons that can search for and destroy enemy targets all on their own. Paul Scharre, a leading expert in next-generation warfare, describes these and other high tech weapons systems—from Israel’s Harpy drone to the American submarine-hunting robot ship Sea Hunter—and examines the legal and ethical issues surrounding their use. “A smart primer to what’s to come in warfare” (Bruce Schneier), Army of None engages military history, global policy, and cutting-edge science to explore the implications of giving weapons the freedom to make life and death decisions. A former soldier himself, Scharre argues that we must embrace technology where it can make war more precise and humane, but when the choice is life or death, there is no replacement for the human heart.
Download or read book Aviation Automation written by Charles E. Billings and published by CRC Press. This book was released on 2018-01-29 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of very compact, very powerful digital computers has made it possible to automate a great many processes that formerly required large, complex machinery. Digital computers have made possible revolutionary changes in industry, commerce, and transportation. This book, an expansion and revision of the author's earlier technical papers on this subject, describes the development of automation in aircraft and in the aviation system, its likely evolution in the future, and the effects that these technologies have had -- and will have -- on the human operators and managers of the system. It suggests concepts that may be able to enhance human-machine relationships in future systems. The author focuses on the ability of human operators to work cooperatively with the constellation of machines they command and control, because it is the interactions among these system elements that result in the system's success or failure, whether in aviation or elsewhere. Aviation automation has provided great social and technological benefits, but these benefits have not come without cost. In recent years, new problems in aircraft have emerged due to failures in the human-machine relationship. These incidents and accidents have motivated this inquiry into aviation automation. Similar problems in the air traffic management system are predicted as it becomes more fully automated. In particular, incidents and accidents have occurred which suggest that the principle problems with today's aviation automation are associated with its complexity, coupling, autonomy, and opacity. These problems are not unique to aviation; they exist in other highly dynamic domains as well. The author suggests that a different approach to automation -- called "human-centered automation" -- offers potential benefits for system performance by enabling a more cooperative human-machine relationship in the control and management of aircraft and air traffic.
Download or read book Aircraft Technology written by Melih Kushan and published by BoD – Books on Demand. This book was released on 2018-09-12 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well known that improvements in space and aviation are the leader of today's technology, and the aircraft is the most important product of aviation. Because of this fact, the books on aircraft are always at the center of interest. In most cases, technologies designed for the aerospace industry are rapidly extending into other areas. For example, although composite materials are developed for the aerospace industry, these materials are not often used in aircraft. However, composite materials are utilized significantly in many different sectors, such as automotive, marine and civil engineering. And materials science in aviation, reliability and efficiency in aircraft technology have a major importance in aircraft design.
Download or read book No Man s Land written by Kevin Sullivan and published by HarperCollins Australia. This book was released on 2019-06-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: A gripping account of how a major air disaster was averted, by the captain and former Top Gun pilot Instinctively, I release my pressure on the sidestick. Out of my subconscious, a survival technique from a previous life emerges: Neutralise! I'm not in control so I must neutralise controls. I never imagined I'd use this part of my military experience in a commercial airliner ... On routine flight QF72 from Singapore to Perth on 7 October 2008, the primary flight computers went rogue, causing the plane to pitch down, nose first, towards the Indian Ocean - twice. The Airbus A330 carrying 315 passengers and crew was out of control, with violent negative G forces propelling anyone and anything untethered through the cabin roof. It took the skill and discipline of veteran US Navy Top Gun Kevin Sullivan, captain of the ill-fated flight, to wrestle the plane back under control and perform a high-stakes emergency landing at a RAAF base on the WA coast 1200 kilometres north of Perth. In No Man's Land, the captain of the flight tells the full story for the first time. It's a gripping, blow-by-blow account of how, along with his co-pilots, Sullivan relied on his elite military training to land the gravely malfunctioning plane and narrowly avert what could have been a horrific air disaster. As automation becomes the way of the future, and in the aftermath of Ethiopian Airlines flight 302 and Lion Air flight JT610, the story of QF72 raises important questions about how much control we relinquish to computers and whether more checks and balances are needed. A gripping read in the tradition of Sully: Miracle on the Hudson by Chesley B. Sullenberger.
Download or read book Autonomous Horizons written by Greg Zacharias and published by Independently Published. This book was released on 2019-04-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Greg Zacharias, former Chief Scientist of the United States Air Force (2015-18), explores next steps in autonomous systems (AS) development, fielding, and training. Rapid advances in AS development and artificial intelligence (AI) research will change how we think about machines, whether they are individual vehicle platforms or networked enterprises. The payoff will be considerable, affording the US military significant protection for aviators, greater effectiveness in employment, and unlimited opportunities for novel and disruptive concepts of operations. Autonomous Horizons: The Way Forward identifies issues and makes recommendations for the Air Force to take full advantage of this transformational technology.
Download or read book Flight to the Future written by National Research Council and published by National Academies Press. This book was released on 1997-02-28 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the strong safety record of the national airspace system, serious disruptions occasionally occur, often as a result of outdated or failed equipment. Under these circumstances, safety relies on the skills of the controllers and pilots and on reducing the number of aircraft in the air. The current and growing pressures to increase the capacity to handle a greater number of flights has led to a call for faster and more powerful equipment and for equipment that can take over some of the tasks now being performed by humans. Increasing the role of automation in air traffic control may provide a more efficient system, but will human controllers be able to effectively take over when problems occur? This comprehensive volume provides a baseline of knowledge about the capabilities and limitations of humans relative to the variety of functions performed in air traffic control. It focuses on balancing safety with the expeditious flow of air traffic, identifying lessons from past air accidents. The book discusses: The function of the national airspace system and the procedures for hiring, training, and evaluating controllers. Decisionmaking, memory, alertness, vigilance, sleep patterns during shift work, communication, and other factors in controllers' performance. Research on automation and human factors in air traffic control and incorporation of findings into the system. The Federal Aviation Administration's management of the air traffic control system and its dual mandate to promote safety and the development of air commerce. This book also offers recommendations for evaluation the human role in automated air traffic control systems and for managing the introduction of automation into current facilities and operations. It will be of interest to anyone concerned about air safetyâ€"policymakers, regulators, air traffic managers and controllers, airline officials, and passenger advocates.
