Download or read book Automating Manufacturing Operations written by William M. Hawkins and published by Momentum Press. This book was released on 2013-11-08 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial automation has gone from simple pre-programmed machine instructions to complex general manufacturing, rules-based automation procedures. Unlike other books on industrial automation, this book focuses in on "Manufacturing Operations Systems" (MOPS) in general. It describes their development, implementation and successful management. The book especially addresses the all-important human-machine interface: computer-based manufacturing procedures that are understandable to both computers and humans. Consequently, a language for writing procedures is discussed. It is a language based on Chinese grammar, which is the simplest of all complex human languages. Finally, the design of procedures is discussed as a hierarchy of complexity, along with exception handling at each level. Readers with basic experience using non-procedural automation can greatly benefit from the productivity gains possible from procedural-based automation. They will learn how to create procedural language that is as close to natural language as possible. The reader also will benefit from * A brief overview and history of Manufacturing Operations (MOPS) * Coverage of manufacturing units and regulatory and sequential control * Discussion of Data recording from MOPs and tasks * An overview of Automating Manufacturing Tasks with DCS, PLC, and PCS * Guidelines for setting up an Automated MOPS (AMOPS) project * Guidelines for validating an AMOPS for regulated industries * Examples of applications for both continuous and batch manufacturing

Download or read book Manufacturing Automation Management written by Roger W. Bolz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation has been employed for many years to provide a multitude of reasonably priced products for the American consumer. However, it has become evident that its real character as a manufacturing systems approach needs to be examined carefully for a better appreciation. In this book the purpose is to examine automation technology in its broadest sense and develop not only an understanding but also present some of the engineering and organization "know-how" by which manufacturing management can more effectively utilize automation to improve pro ductivity and combat rising costs in the years ahead. Fundamentally, this book is addressed to manufacturing managers, and the material presented in a manner that will provide the knowledge for assuring success in automating. In addition, it highlights the man ufacturing research and long-range planning that will be required for creating the new manufacturing technology so necessary for assuring success in future automation efforts. One of the important facts emphasized in this text is that automation is not merely robotics ar another kind or type of machinery. To effect true productivity improvement requires a fresh look at the entire pro duction process or facility-as a completely integrated system. With the developments of the past few years, rapid advances in the technology and the "tools of automation" have brought this imperative goal within the reasonable grasp of manufacturing management in almost every segment of industry. However, to utilize this progress, it is necessary to acquire a working understanding of all facets of automation.

Download or read book Manufacturing Automation written by Yusuf Altintas and published by Cambridge University Press. This book was released on 2012-01-16 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting is widely used in producing manufactured products. The technology has advanced considerably along with new materials, computers and sensors. This new edition considers the scientific principles of metal cutting and their practical application to manufacturing problems. It begins with metal cutting mechanics, principles of vibration and experimental modal analysis applied to solving shop floor problems. There is in-depth coverage of chatter vibrations, a problem experienced daily by manufacturing engineers. Programming, design and automation of CNC (computer numerical control) machine tools, NC (numerical control) programming and CAD/CAM technology are discussed. The text also covers the selection of drive actuators, feedback sensors, modelling and control of feed drives, the design of real time trajectory generation and interpolation algorithms and CNC-oriented error analysis in detail. Each chapter includes examples drawn from industry, design projects and homework problems. This is ideal for advanced undergraduate and graduate students and also practising engineers.

Download or read book Automated Manufacturing Systems written by S. Brian Morriss and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1995 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text, which requires no prerequisites examines the components used in automated systems. It provides a balanced coverage of sensors, actuators, controllers and control theory and discusses some special-purpose automation components, automation systems and automation concepts. The text is unique in its clear, complete coverage of servosystems.

Download or read book Advanced Manufacturing and Automation V written by K. Wang and published by WIT Press. This book was released on 2016-02-03 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Manufacturing and Automation V contains the proceedings of the 5th International Workshop of Advanced Manufacturing and Automation (IWAMA 2015). This meeting continues the success of this important international workshop series and disseminates the works of academic and industrial experts, from around the world, in the areas of advanced manufacturing and automation. The disciplines of manufacturing and automation have attained paramount importance and are vital factors for the maintenance and improvement of the economy of a nation and the quality of life. Manufacturing and automation are advancing at a rapid pace and new technologies are constantly emerging in the fields. The challenges faced by today’s engineers are forcing them to keep on top of the emerging trends through continuous research and development. The papers comprising these proceedings cover various topics including: Robotics and automation; Computational intelligence; Design and optimization; Product life-cycle management; Integration of CAD/CAPP/CAM/CIMS; Advanced manufacturing systems; Manufacturing operations management; Knowledge-based manufacturing; Manufacturing quality control and management; Sustainable production; Diagnosis and prognosis of machines; Lean and agile manufacturing; Virtual and grid manufacturing; Resource and asset management; Logistics and supply chain management; RFID applications; Predictive maintenance; Reliability and maintainability in manufacturing; Project management; Renewable energy development; Environment protection; Intelligent detection.

Download or read book Manufacturing Processes written by John Barry DuVall and published by Goodheart-Wilcox Publisher. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Processes provides an excellent introduction to today's manufacturing processes, as well as an overview of automated manufacturing systems. The text concentrates on the five major types of industrial materials: metals, plastics, ceramics, woods, and composites. It providesthorough coverage of the forming, separating, fabricating, conditioning, and finishing processes related to each material. The text includes a chapter covering the materials and manufacturing processes used in packaging finished goods.

Download or read book Controlling Automated Manufacturing Systems written by P.J. O'Grady and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master production scheduling II 60 On-line scheduling 65 Specific data requirements 69 Mailbox approaches 70 Conclusion 72 Chapter 7: Cell Level Control 75 Introduction 75 CCS classification 77 What is a cell? 78 CCS operational modes 80 Conclusion 86 Chapter 8: Equipment Level Control 89 Introduction 89 What is meant by equipment? 90 Equipment level control structure 92 Conclusion 94 Chapter 9: Conclusion and Future Trends 95 Overall production planning and control functions 98 Future trends 100 Conclusion 102 Appendix I: Master Production Scheduling II 103 References 107 Index 109 Preface This book is intended as an introduction to production planning and control of automated manufacturing systems. As such, it links together two diverse fields of interest: in the area of production planning and control there is a large body of work completed in analytical models, computer structures and overall systems; equally, for the hardware and detailed control aspects of the equipment used (for example, NC machines, robots, etc), comprehensive studies have also been completed. To cover each area fully would result in a work of several volumes. Instead, this book stresses the important elements of both areas that are vital to effective production planning and control of the whole automated manufacturing system.

Download or read book Overview of Industrial Process Automation written by K.L.S. Sharma and published by Elsevier. This book was released on 2016-10-25 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of Industrial Process Automation, Second Edition, introduces the basics of philosophy, technology, terminology, and practices of modern automation systems through the presentation of updated examples, illustrations, case studies, and images. This updated edition adds new developments in the automation domain, and its reorganization of chapters and appendixes provides better continuity and seamless knowledge transfer. Manufacturing and chemical engineers involved in factory and process automation, and students studying industrial automation will find this book to be a great, comprehensive resource for further explanation and study. - Presents a ready made reference that introduces all aspects of automation technology in a single place with day-to-day examples - Provides a basic platform for the understanding of industry literature on automation products, systems, and solutions - Contains a guided tour of the subject without the requirement of any previous knowledge on automation - Includes new topics, such as factory and process automation, IT/OT Integration, ISA 95, Industry 4.0, IoT, etc., along with safety systems in process plants and machines

Download or read book Automation in Garment Manufacturing written by Rajkishore Nayak and published by Woodhead Publishing. This book was released on 2017-11-10 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation in Garment Manufacturing provides systematic and comprehensive insights into this multifaceted process. Chapters cover the role of automation in design and product development, including color matching, fabric inspection, 3D body scanning, computer-aided design and prototyping. Part Two covers automation in garment production, from handling, spreading and cutting, through to finishing and pressing techniques. Final chapters discuss advanced tools for assessing productivity in manufacturing, logistics and supply-chain management. This book is a key resource for all those engaged in textile and apparel development and production, and is also ideal for academics engaged in research on textile science and technology. - Delivers theoretical and practical guidance on automated processes that benefit anyone developing or manufacturing textile products - Offers a range of perspectives on manufacturing from an international team of authors - Provides systematic and comprehensive coverage of the topic, from fabric construction, through product development, to current and potential applications

Download or read book Planning for Factory Automation written by Peter G. Vanderspek and published by McGraw-Hill Companies. This book was released on 1993 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.

Download or read book Computer Automation in Manufacturing written by Thomas O. Boucher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: o Computer Automation in Manufacturing provide instruction in computer architecture, interfacing to mechanical systems, and software development for continuous control and discrete event systems. This is accomplished by presenting theoretical material and hands-on laboratory experiments.

Download or read book Enabling Automation of Composite Manufacturing through the Use of Off The Shelf Solutions written by Andreas Björnsson and published by Linköping University Electronic Press. This book was released on 2014-11-10 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials offer an appealing combination of low weight and high strength that is especially sought after in high-performance applications. The use of composite materials has and is continuing to increase, and the use of the material has been shown to provide substantial weight savings in for example aircraft design. With an increased use of composite materials follows an increased demand for cost-efficient manufacturing methods. Composite products are in many cases manufactured either by manual operations or by the use of complex automated solutions associated with high investment costs. The objective for this research is to explore an approach to develop automated composite manufacturing based on commercially available off-the-shelf solutions as an alternative to the existing automated solutions for composite manufacturing. The research, which was carried out in collaboration with industrial partners within the aerospace sector, is based on a demonstrator-centered research approach. Three conceptual demonstrators, focusing on three different manufacturing methods and a number of physical demonstrators, are used to show that off-the-shelf solutions can be used for automated manufacturing of composite products. Two aspects that affect if it is possible to use off-the-shelf solutions for automated composite manufacturing are the rigorous quality standards used by the aerospace industry and the great variety in product properties and material properties that is associated with composite manufacturing. The advantages in using off-the-shelf solutions has shown to be that the solutions generally are associated with low investments and that published information about the solutions, and the solutions themselves, is generally available for evaluation and testing. When working with the demonstrators it has been shown to be useful to break down a manufacturing system into basic tasks and consider off-the-shelf solutions for each particular task. This approach facilitates the search for a suitable off-the-shelf solution to solve a particular task. However, each of the separate tasks can affect other areas of the manufacturing system, and an overall systems perspective is required to find solutions that are compatible with the entire manufacturing system.

Download or read book Automating Quality Systems written by J.D. Tannock and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality is a topical issue in manufacturing. Competitive quality performance still eludes many manufacturers in the traditional industrialized countries. A lack of quality competitiveness is one of the root causes of the relative industrial decline and consequent trade imbalances which plague some Western economies. Many explanations are advanced for poor quality performance. Inadequate levels of investment in advanced technology, together with insufficient education and training of the workforce, are perhaps the most prominent. Some believe these problems are caused by a lack of awareness and commitment from top management, while others point to differences between industrial cultures. The established remedy is known as Total Quality Management (TQM). TQM requires a corporate culture change, driven from the top, and involving every employee in a process of never-ending quality improvement aimed at internal as well as external customers. The techniques deployed to achieve TQM include measures to improve motivation, training in problem-solving and statistical process control (SPC). Quality is, however, only one of the competitive pressures placed It is also upon the manufacturer by the modem global economy. imperative to remain economical and efficient, while increasing the flexibility and responsiveness of the design and manufacturing functions. Here the reduction or elimination of stock is of great importance, particularly as financial interest rates in the less successful manufacturing nations are frequently high. Product life cycles must become ever more compressed in response to the phenomenal design to-manufacture performance of some Pacific rim economies.

Download or read book CAD CAM Robotics and Factories of the Future written by Birendra Prasad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is about automation - automation in design, automation in manufacturing, and automation in production. Automation is essen tial for increased productivity of quality products at reduced costs. That even partial or piecemeal automation of a production facility can deliver dramatic improvements in productivity has been amply demon strated in many a real-life situation. Hence, currently, great ef forts are being devoted to research and development of general as well special methodologies of and tools for automation. This volume re ports on some of these methodologies and tools. In general terms, methodologies for automation can be divided into two groups. There are situations where a process, whether open-loop or closed-loop, is fairly clearly understood. In such a situation, it is possible to create a mathematical model and to prescribe a mathe matical procedure to optimize the output. If such mathematical models and procedures are computationally tractable, we call the correspond ing automation - algorithmic or parametric programming. There is, however, a second set of situations which include process es that are not well understood and the available mathematical models are only approximate and discrete. While there are others for which mathematical procedures are so complex and disjoint that they are computationally intractable. These are the situations for which heuristics are quite suitable for automation. We choose to call such automation, knowledge-based automation or heuristic programming.

Download or read book PERFORMANCE MODELING OF AUTOMATED SYSTEMS written by VISWANADHAM, N. and published by PHI Learning Pvt. Ltd.. This book was released on 2015-06-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text is designed for engineering students at the senior undergraduate level and first-year students at graduate level, and professionals (R&D engineers in the industry and factory managers). The authors offer a unique effort in presenting a unified and systematic treatment of various modeling methodologies and analysis techniques for performance evaluation of automated manufacturing systems. The text begins with an overview of automated manufacturing systems, and then provides a clear and comprehensive discussion of three principal analytical modeling paradigms: Markov Chains, Queues and Queuing Networks, and Petri Nets. Salient Features • Present the first ever treatment of the mathematical modeling of manufacturing systems. • Offers a unified study of principal analytical modeling paradigms for automated manufacturing systems. • Discusses many recent research contributions in the area of modeling of automated manufacturing systems. • Discusses many recent research contributions in the area of modeling of automated manufacturing systems, including deadlock modeling, transient analysis, queuing network approximations, Petri Net modeling, and integrated analytical modeling. • Provides a large number of exercises and problems.

Download or read book Advances in Industrial Automation and Smart Manufacturing written by A. Arockiarajan and published by Springer Nature. This book was released on 2020-10-20 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected peer-reviewed proceedings of the International Conference on Advances in Industrial Automation and Smart Manufacturing (ICAIASM) 2019. The contents focus on innovative manufacturing processes, standards and technologies used to implement Industry 4.0, and industrial IoT based environment for smart manufacturing. The book particularly emphasizes on emerging industrial concepts like industrial IoT and cyber physical systems, advanced simulation and digital twin, wireless instrumentation, rapid prototyping and tooling, augmented reality, analytics and manufacturing operations management. Given the range of topics covered, this book will be useful for students, researchers as well as industry professionals.

Download or read book Control and Dynamic Systems V47 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 47: Manufacturing and Automation Systems: Techniques and Technologies, Part 3 of 5 deals with techniques and technologies in manufacturing and automation systems. This book discusses techniques in modeling and control policies for production networks; effective planning and control of day-to-day operations; evaluation of automated manufacturing systems; the use of Petri Nets in modeling, control and performance analysis of automated manufacturing systems; and concurrent engineering and evaluation of concurrency in engineering design. The final chapter discusses the algorithm for solving allocation problems. This book will provide a uniquely significant reference source for practitioners in the field who want a comprehensive source of techniques with significant applied implications.