Download or read book Automatic Manufacturing Systems II written by Run Hua Tan and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 1560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This work on the topic of automatic manufacturing systems consists of 302 peer-reviewed papers. The papers are grouped into ten chapters: Virtual Manufacturing and Sustainable Manufacturing; Digital Manufacture and Quality Monitoring; Systems Analysis and Industrial Engineering; Supply Chain and E-Commerce Systems; Computer-Aided Manufacturing Engineering; Mechatronics; Transmission and Control of Fluid; Mechanical Control and Information Processing Technology; Micro-Electronic Packaging Technology and Equipment; Computer Application Technology.

Download or read book Automating Manufacturing Systems with Plcs written by Hugh Jack and published by Lulu.com. This book was released on 2009-08-27 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in depth examination of manufacturing control systems using structured design methods. Topics include ladder logic and other IEC 61131 standards, wiring, communication, analog IO, structured programming, and communications.Allen Bradley PLCs are used extensively through the book, but the formal design methods are applicable to most other PLC brands.A full version of the book and other materials are available on-line at http://engineeronadisk.com

Download or read book Automated Manufacturing Systems written by S. Brian Morriss and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1995 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text, which requires no prerequisites examines the components used in automated systems. It provides a balanced coverage of sensors, actuators, controllers and control theory and discusses some special-purpose automation components, automation systems and automation concepts. The text is unique in its clear, complete coverage of servosystems.

Download or read book PERFORMANCE MODELING OF AUTOMATED SYSTEMS written by VISWANADHAM, N. and published by PHI Learning Pvt. Ltd.. This book was released on 2015-06-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text is designed for engineering students at the senior undergraduate level and first-year students at graduate level, and professionals (R&D engineers in the industry and factory managers). The authors offer a unique effort in presenting a unified and systematic treatment of various modeling methodologies and analysis techniques for performance evaluation of automated manufacturing systems. The text begins with an overview of automated manufacturing systems, and then provides a clear and comprehensive discussion of three principal analytical modeling paradigms: Markov Chains, Queues and Queuing Networks, and Petri Nets. Salient Features • Present the first ever treatment of the mathematical modeling of manufacturing systems. • Offers a unified study of principal analytical modeling paradigms for automated manufacturing systems. • Discusses many recent research contributions in the area of modeling of automated manufacturing systems. • Discusses many recent research contributions in the area of modeling of automated manufacturing systems, including deadlock modeling, transient analysis, queuing network approximations, Petri Net modeling, and integrated analytical modeling. • Provides a large number of exercises and problems.

Download or read book Optimal Supervisory Control of Automated Manufacturing Systems written by Yufeng Chen and published by CRC Press. This book was released on 2013-01-23 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents the state-of-the-art developments in the design of behaviorally and structurally optimal livenessen-forcing Petri net supervisors with computationally tractable approaches. It details optimal supervisory control problems arising in automated production systems and outlines a methodology to achieve the optimality purposes of deadlock prevention via converting a variety of problems under consideration into integer linear programming models. The book includes a reference bibliography at the end of each chapter and a complete index.

Download or read book Controlling Automated Manufacturing Systems written by P.J. O'Grady and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master production scheduling II 60 On-line scheduling 65 Specific data requirements 69 Mailbox approaches 70 Conclusion 72 Chapter 7: Cell Level Control 75 Introduction 75 CCS classification 77 What is a cell? 78 CCS operational modes 80 Conclusion 86 Chapter 8: Equipment Level Control 89 Introduction 89 What is meant by equipment? 90 Equipment level control structure 92 Conclusion 94 Chapter 9: Conclusion and Future Trends 95 Overall production planning and control functions 98 Future trends 100 Conclusion 102 Appendix I: Master Production Scheduling II 103 References 107 Index 109 Preface This book is intended as an introduction to production planning and control of automated manufacturing systems. As such, it links together two diverse fields of interest: in the area of production planning and control there is a large body of work completed in analytical models, computer structures and overall systems; equally, for the hardware and detailed control aspects of the equipment used (for example, NC machines, robots, etc), comprehensive studies have also been completed. To cover each area fully would result in a work of several volumes. Instead, this book stresses the important elements of both areas that are vital to effective production planning and control of the whole automated manufacturing system.

Download or read book Automatic Manufacturing Systems II written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Systems Engineering written by Katsundo Hitomi and published by CRC Press. This book was released on 1996-10-30 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the classic textbook has been written to provide a completely up-to-date text for students of mechanical, industrial, manufacturing and production engineering, and is an indispensable reference for professional industrial engineers and managers. In his outstanding book, Professor Katsundo Hitomi integrates three key themes into the text: * manufacturing technology * production management * industrial economics Manufacturing technology is concerned with the flow of materials from the acquisition of raw materials, through conversion in the workshop to the shipping of finished goods to the customer. Production management deals with the flow of information, by which the flow of materials is managed efficiently, through planning and control techniques. Industrial economics focuses on the flow of production costs, aiming to minimise these to facilitate competitive pricing. Professor Hitomi argues that the fundamental purpose of manufacturing is to create tangible goods, and it has a tradition dating back to the prehistoric toolmakers. The fundamental importance of manufacturing is that it facilitates basic existence, it creates wealth, and it contributes to human happiness - manufacturing matters. Nowadays we regard manufacturing as operating in these other contexts, beyond the technological. It is in this unique synthesis that Professor Hitomi's study constitutes a new discipline: manufacturing systems engineering - a system that will promote manufacturing excellence. Key Features: * The classic textbook in manufacturing engineering * Fully revised edition providing a modern introduction to manufacturing technology, production managment and industrial economics * Includes review questions and problems for the student reader

Download or read book Balanced Automation Systems II written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2013-06-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: xiv box for Balanced Automation, research in this area is still young and emerging. In our opinion, the development of hybrid balanced solutions to cope with a variety of automation levels and manual approaches, is a much more challenging research problem than the search for a purely automatic solution. Various research activities described in this book illustrate some of these challenges through the development proposals, assisting tools, and initial results. In certain chapters however, the balancing aspects are not yet achieved in the research area, but their inclusion in this book is intended to give a broader and more comprehensive perspective of the multiple areas involved. One important aspect to be noticed is the extension and application of the concept of balanced automation to all areas of the manufacturing enterprise. Clearly, the need for a "balanced" approach is not restricted to the shop floor components, rather it applies to all other areas, as illustrated by the wide spectrum of research contributions found in this book. For instance, the need for an appropriate integration of multiple systems and their perspectives is particularly important for the implantation of virtual enterprises. Although both the BASYS'95 and the BASYS'96 conferences have provided important contributions, approaches, and tools for the implantation of balanced automation systems, there are a number of areas that require further research: .

Download or read book Deadlock Resolution in Automated Manufacturing Systems written by ZhiWu Li and published by Springer Science & Business Media. This book was released on 2009-03-04 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deadlock problems in flexible manufacturing systems (FMS) have received more and more attention in the last two decades. Petri nets are one of the more promising mathematical tools for tackling deadlocks in various resource allocation systems. In a system modeled with Petri nets, siphons are tied to the occurrence of deadlock states as a structural object. The book systematically introduces the novel theory of siphons, traps, and elementary siphons of Petri nets as well as the deadlock control strategies for FMS developed from it. Deadlock prevention methods are examined comparatively. The many FMS examples presented to demonstrate the concepts and results of this book range from the simple to the complex. Importantly, to inspire and motive the reader’s interest in further research, a number of interesting and open problems in this area are proposed at the end of each chapter.

Download or read book Performance Modeling of Automated Manufacturing Systems written by N. Viswanadham and published by . This book was released on 1992 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Economics of Advanced Manufacturing Systems written by Hamid R. Parsaei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1980s have witnessed a tremendous growth in the field of computer integrated manufacturing systems. The other major areas of development have been computer-aided design, computer-aided manufacturing, industrial robotics, automated assembly, cellular and modular material handling, computer networking and office automation to name just a few. These new technologies are generally capital intensive and do not conform to traditional cost structures. The net result is a tremendous change in the way costs should be estimated and economic analyses performed. The majority of existing engineering economy texts still profess application of traditional analysis methods. But, as was men tioned above, it is clear that the basic trend in manufacturing industries is itself changing. So it is quite obvious that the practice of traditional economic analysis methods should change too. This book is an attempt to address the various issues associated with non-traditional methods for evaluation of advanced computer-integrated technologies. This volume consists of twenty refereed articles which are grouped into five parts. Part one, Economic Justification Methods, consists of six articles. In the first paper, Soni et at. present a new classification for economic justification methods for advanced automated manufacturing systems. In the second, Henghold and LeClair look at strengths and weaknesses of expert systems in general and more specifically, an ap plication aimed at investment justification in advanced technology. The third paper, by Carrasco and Lee, proposes an enhanced economic methodology to improve the needs analysis, conceptual design and de tailed design activities associated with technology modernization.

Download or read book Modeling and Control of Automated Manufacturing Systems written by Alan A. Desrochers and published by . This book was released on 1990 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control and Dynamic Systems V46 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Academic Press. This book was released on 2012-12-02 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 46: Manufacturing and Automation Systems: Techniques and Technologies, Part 2 of 5 covers the significant advances and issues on the utilization of techniques and technologies in the manufacturing industries. This volume is divided into nine chapters and starts with the essential issue of software in manufacturing systems, particularly the aspects of the control software that are active in the time-critical or real time portions of the machine's operation. The succeeding chapters deal with the interactions between material-handling systems and other components of manufacturing systems; the principles of flexible manufacturing systems; the various views on the contributions of mechatronics; and the techniques for machine layout optimization in manufacturing and automation systems. These topics are followed by discussions of the application of a real-time control system to address issues of safety, productivity advances, and production cost reductions. Other chapters consider the influence of human supervisory control of predominantly automated manufacturing processes and the techniques for the manufacturing systems integration. The final chapter examines the major importance of the assembly line balancing to manufacturing systems. This book is of great value to process and mechanical engineers, as well as process control workers and researchers.

Download or read book Microprocessors in Robotic and Manufacturing Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprocessors play a dominant role in computer technology and have contributed uniquely in the development of many new concepts and design techniques for modem industrial systems. This contribution is excessively high in the area of robotic and manufacturing systems. However, it is the editor's feeling that a reference book describing this contribution in a cohesive way and covering the major hardware and software issues is lacking. The purpose of this book is exactly to fill in this gap through the collection and presentation of the experience of a number of experts and professionals working in different academic and industrial environments. The book is divided in three parts. Part 1 involves the first four chapters and deals with the utilization of microprocessors and digital signal processors ( DSPs ) for the computation of robot dynamics. The emphasis here is on parallel computation with particular problems attacked being task granularity, task allocation/scheduling and communication issues. Chapter I, by Zheng and Hemami, is concerned with the real-time multiprocessor computation of torques in robot control systems via the Newton-Euler equations. This reduces substantially the height of the evaluation tree which leads to more effective parallel processing. Chapter 2, by D'Hollander, examines thoroughly the automatic scheduling of the Newton-Euler inverse dynamic equations. The automatic program decomposition and scheduling techniques developed are embedded in a tool used to generate multiprocessor schedules from a high-level language program.

Download or read book Automating Manufacturing Systems with Plcs written by Hugh Jack and published by Lulu.com. This book was released on 2009-08-27 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in depth examination of manufacturing control systems using structured design methods. Topics include ladder logic and other IEC 61131 standards, wiring, communication, analog IO, structured programming, and communications.Allen Bradley PLCs are used extensively through the book, but the formal design methods are applicable to most other PLC brands.A full version of the book and other materials are available on-line at http://engineeronadisk.com

Download or read book Advances in Manufacturing Technology II written by Peter F. McGoldrick and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: EN Corlett Joint-Chairman - COPED, University of Nottingham, Nottingham, UK The contributions offered to this Third National Conference demonstrate that research in production is very much alive. The considerable numbers of papers on robotics, automation and flexible manufacturing systems, together with those in production control and quality matters, demonstrate that there is much work going on in our colleges, polytechnics and universities related to modern methods of manufacture. The future of manufacture undoubtedly hinges on better control. Control over the supply and movement of materials is now keenly sought. Control over manufacturing equipment is also a goal, not just to maintain quality but to give flexibility in sequence and quantity. None of these objectives for improved performance is entirely a technical matter, although there is an increasing technical ability to influence all of them. To achieve their potential, they depend on competent people at all levels. Discussion with alert managers soon reveals that this is one of their major concerns. Either the people they have require more training, or they cannot hire the people with the abilities they need. This applies at all levels, and the availability of people with competence in manufacture is particularly low.