Download or read book Automatic Assembly written by Geoffrey Boothroyd and published by . This book was released on 1982 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assembly Automation written by Frank J. Riley and published by Industrial Press Inc.. This book was released on 1996 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Success in automatic assembly design and operation comes from an awareness and sensitivity to a multitude of small design details, and only Frank Riley could pack so much knowledge and experience into a practical and authoritative guide to the selection and application of automatic assembly machinery. A vast amount of practical information about all aspects of automated assembly can be found in this important revised edition.
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Theory of Automatic Robot Assembly and Programming written by B. O. Nnaji and published by Springer Science & Business Media. This book was released on 1993 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machines will gradually become programmed using computers which have the knowledge of how the objects in the world relate to one another. This book capitalizes on the fact that products which are manufactured can be designed on the computer and that information about the product such as its physical shape provide powerful information to reason about how to develop the process plan for their manufacture. This book explores the whole aspect of using the principles of how parts behave naturally to automatically generate programs that govern how to produce them. The last decade saw tremendous work on how machines can be programmed to perform a variety of tasks automatically. Robotics has witnessed the most work on programming techniques. But it was not until the emergence of the advanced CAD system as a proper source of information representation about objects which are to be manipulated by the robot that it became viable for automated processors to generate robot programs without human interface. It became possible for objects to be described and for principles about how they interact in the world to be developed. The functions which the features designed into the objects serve for the objects can be adequately represented and used in reasoning about the manufacturing of the parts using the robot. This book describes the necessary principles which must be developed for a robot to generate its own programs with the knowledge of the world in the CAD system.
Download or read book Assembly Automation and Product Design written by Geoffrey Boothroyd and published by CRC Press. This book was released on 1991-08-30 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Text for professional seminars and upper-level undergraduate and graduate courses on assembly automation in manufacturing and product design, and/or reference guide for manufacturing, product, design, industrial, and mechanical engineers seeking to improve productivity and competitiveness while redu
Download or read book Assembly Automation and Product Design written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2005-06-22 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing design for automated and manual assembly processes, Assembly Automation and Product Design, Second Edition examines assembly automation in parallel with product design. The author enumerates the components, processes, performance, and comparative economics of several types of automatic assembly systems. He provides information on equipme
Download or read book Product Design for Manufacture and Assembly Second Edition Revised and Expanded written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2002 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing more than 300 equations and the extensive data, necessary to estimate manufacturing and assembly cost during product design, benchmarking, and should cost analysis, this textbook gives students modern and effective tools for analysing injection moulding, sheet metalworking, die casting, powder metal processing costs, sand and investment casting, and hot forging. It includes discussions of the influence of the application of design for manufacture and assembly, material selection and economic ranking of processes, the effect of reduced assembly difficulties on product quality, the links between computer-aided design solid models and design analysis tools, and more.
Download or read book Software Design for Automated Assembly of Truss Structures written by and published by . This book was released on 1992 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Fastening Joining and Assembly written by James A. Speck and published by CRC Press. This book was released on 2018-10-08 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain a Deeper Understanding of Mechanical Fastening: Assemble More Efficient and Competitive Products A good design, quality parts, and properly executed assembly procedures and processes result in well-fastened assemblies. Utilizing a combined knowledge of mechanical assembly engineering and fastening technology, Mechanical Fastening, Joining, and Assembly, Second Edition provides readers with a solid understanding of mechanical fastening, joining, and assembly information. Based on the author’s experience in the field, this updated mechanical arts guide and reference chronicles the technical progress since the first edition was published more than a decade ago. Provides Case Studies Showing Real-World Applications for Commonly Used Assemblies The second edition addresses recent trends in the industry, and looks at new fastening technologies used in aerospace, automotive, and other key areas. It explains the fastening function in depth, and describes the types of fastening approaches that can be used effectively. The revised text expands on the presentation and review of fastened components, detailing the assembly, design, manufacturing, and installation of fastener products and procedures. It covers specific joining applications, including vibration, standard, and special materials; details environmental factors; and provides useful reference charts for future use. What’s New in the Second Edition: Provides an up-to-date selection of technologies Contains practical approaches to modern fastener technology Reviews engineering fundamentals with a focus on their application in the fastener industry Includes a section on fastener statics Expands on fastener manufacturing processes, most specifically cold heading and roll threading Adds fastener dynamics to draw attention to forces in motion (wind turbine hub turning in strong winds) and fastener strength of materials Extends review of the economics of fastening and provides some tools for engineering economics Examines the difference in static and dynamic strengths Considers fastener materials in this new century, provides some observations about the fastener laboratory, and discusses electrical theory Addresses sustainability, application product management, thermodynamics, energy systems, and new thought maps for application analysis Takes a look at a favorite application, D&D 100, and more Mechanical Fastening, Joining, and Assembly, Second Edition is accessible to novices and experienced technologists and engineers, and covers the latest in fastener technology and assembly training.
Download or read book Stochastic Design Optimization of Asynchronous Automatic Assembly Systems written by Zhiming Liu and published by . This book was released on 1987 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Array Automated Assembly Task written by Sang S. Rhee and published by . This book was released on 1978 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Assembly Handbook written by Bruno Lotter and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Assembly Handbook identifies the possibilities for the rationalization of assembly in relation to the production rate and the product design. This book is based on practical experience for practical application and will give experts in the field of rationalization guidelines for the solution of rationalization problems. Topics discussed in the text include the determination of the economic efficiency of assembly concepts, modules for the automation of assembly processes, design of assembly machines, and design of flexible-assembly systems. The integration of parts manufacturing processes into assembly equipment or of assembly operations into parts production equipment, planning and efficiency of automated assembly systems, and the operation of automated assembly systems are covered as well. Production engineers and managers and students of production technology will find the book very useful.
Download or read book Transforming Automobile Assembly written by Koichi Shimokawa and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the world's leading car-makers, the early 1990s brought radical changes. The reports published by MIT shocked management in European and American industries. Former major companies had to face consequences no one had expected. The assembly-lines were reorganized in order to achieve higher quality at lower costs. Five years after the MIT report, this book poses the question: What are the results of this revolution in work organization? Scientists and practitioners, many of them involved in earlier reports, evaluate the changes to the automotive industry in Europe and Japan. An insight into recent concepts in automation and the organization of production.
Download or read book Printed circuit board assembly written by P.J.W. Noble and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assembly of 'difficult' components onto printed circuit boards is emerging as an important application area for small, fast industrial robots. For other robot tasks - for example paint spraying or arc welding - the applications engineer can rely on a body of published information representing decades of accumulated knowledge about the actual process being automated. But for the process of assembly relatively little systematically presented knowledge exists, mainly because so much manual assembly depends on extremely subtle co-ordination of hand, eye and brain which is hard to represent directly in engineering terms. As for the particular processes of electronic assembly, they have hardly been covered at all in the literature. Yet the design of a good PCB automation system depends crucially on the responsible engineer fully understanding every aspect of the process he or she is automating, whether working for the electronics manufacturer, an automation company, a research laboratory or a machine builder. The author of this book has had extensive practical experience in all these roles: as a source of great detail on most aspects of the electronic assembly process it will be of unique value not only to the robot specialist but well beyond that to anyone needing to understand how printed circuit boards are manufactured. P. G. Davey Acknowledgements The author is indebted to many companies and individuals from within the pcb assembly industry.
Download or read book Newnes Electronics Assembly Handbook written by Keith Brindley and published by Elsevier. This book was released on 2016-06-30 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newnes Electronics Assembly Handbook
Download or read book Industrial Assembly written by Shimon Y. Nof and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Assembly is a rapidly changing field with significant importance in production. This book is the first of its kind to combine technology, design, methods, and planning and control models of assembly operations and systems. With the increasing importance of assembly in industry and of simultaneous engineering approaches, this timely publication provides: comprehensive coverage of technological, engineering, and management aspects of this field; multi-disciplinary approaches to rationalization of assembly operations and systems; explanation of qualitative models, information technologies, and design techniques, which have been practised effectively in industrial assembly; as well as theoretical foundations and emerging trends that shape the future of assembly.
Download or read book Computer aided Assembly Planning written by Alain Delchambre and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assembly sector is one of the least automated in the manufacturing industry. Automation is essential if industrial companies are to be competitive in the future. In assembly, an integrated and flexible approach is needed because 75% of the applications are produced in small and medium batches. The methodologies developed in this book deal with the integration of the assembly process from the initial design of the product to its production. In such an integrated system, assembly planning is one of the most important features. A well-chosen assembly plan will reduce both the number of tool changes and the fixtures within the assembly cell. It will prevent the handling of unstable subassemblies, simplify the design of the robot grippers and reduce production costs. An automatic generator of assembly sequences can be an efficient aid to the designer. Whenever he or she modifies features of the product, the influence of these modifications can immediately be checked on the sequences. For small batch production, the automatic generation of assembly sequences is faster, more reliable and more cost-effective than manual generation. By using this latter method interesting sequences could be missed because of the combinatorial explosion of solutions. The main subjects treated in this book are as follows. 1. Presentation and classification of existing systems of automatic generation of assembly sequences. Automatic assembly planning is, indeed, a very recent research area and, in my experience, no systematic study has been carried out up to now.
