Download or read book Autodesk 3ds Max 2018 A Comprehensive Guide 18th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2017-08-29 with total page 897 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk 3ds Max 2018: A Comprehensive Guide aims at harnessing the power of Autodesk 3ds Max for modelers, animators, and designers. The book caters to the needs of both the novice and the advanced users of 3ds Max. Keeping in view the varied requirements of the users, the book first introduces the basic features of 3ds Max 2018 and then gradually progresses to cover the advanced 3D models and animations. In this book, two projects based on the tools and concepts covered in the book have been added to enhance the knowledge of users. This book will help you unleash your creativity, thus helping you create stunning 3D models and animations. The book will help the learners transform their imagination into reality with ease. Also, it takes the users across a wide spectrum of animations through progressive examples, numerous illustrations, and ample exercises. Salient Features Consists of 18 chapters and 1 project that are organized in a pedagogical sequence covering various aspects of modeling, texturing, lighting, and animation. The author has followed the tutorial approach to explain various concepts of modeling, texturing, lighting, and animation. The first page of every chapter summarizes the topics that are covered in it. Step-by-step instructions that guide the users through the learning process. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation test and Review Questions are given at the end of each chapter so that the users can assess their knowledge. Table of Contents Chapter 1: Introduction to Autodesk 3ds Max 2018 Chapter 2: Standard Primitives Chapter 3: Extended Primitives Chapter 4: Working with Architectural Objects Chapter 5: Splines and Extended Splines Chapter 6: Modifying Splines Chapter 7: Materials and Maps Chapter 8: Modifying 3D Mesh Objects Chapter 9: Graphite Modeling Technique Chapter 10: NURBS Modeling Chapter 11: Compound Objects Chapter 12: Modifiers Chapter 13: Lights and Cameras Chapter 14: Animation Basics Chapter 15: Systems, Hierarchy, and Kinematics Chapter 16: Rigid Body Dynamics and Helpers Chapter 17: Particle Systems and Space Warps-I (For free download) Chapter 18: Particle Systems and Space Warps-II (For free download) Project 1: Creating a Diner Index

Download or read book Pixologic ZBrush 2018 A Comprehensive Guide 5th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pixologic ZBrush 2018: A Comprehensive Guide covers all features of ZBrush 2018, which is a powerful modeling and sculpting software developed by Pixologic Inc. and is used for developing highly detailed characters for movies, games, and digital design projects. The book provides in-depth details of the concepts and explains the usage and functions of the most commonly used tools of ZBrush. In this edition, new feature such as, ZModeler, NanoMesh, and KeyShot renderer have been also been explained. This book will unleash your creativity and transform your imagination into reality, thus helping you create realistic 3D models. This book caters to the needs of both the novice and advanced users of ZBrush 2018 and is ideally suited for learning at your convenience and at your pace. Salient Features: Consists of 12 chapters & 1 project that are organized in a pedagogical sequence. Covers all aspects such as modeling, texturing, lighting, & animation in ZBrush. Tutorial approach to explain the concepts and usage of tools. First page of every chapter summarizes the topics that are covered in the chapter. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation test & Review Questions at the end of each chapter so that the users can assess their knowledge. Table of Contents Chapter 1: Exploring ZBrush Interface Chapter 2: Sculpting Brushes Chapter 3: Introduction to Digital Sculpting Chapter 4: SubTools and FiberMesh Chapter 5: ZSpheres Chapter 6: DynaMesh, NanoMesh, and ZRemesher Chapter 7: ShadowBox Chapter 8: Materials in ZBrush Chapter 9: Texturing in ZBrush Chapter 10: UV Master Chapter 11: Lighting Chapter 12: Rendering Project 1: Cartoon Character Modeling Index

Download or read book Autodesk 3ds Max 2018 for Beginners A Tutorial Approach 18th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2017-08-01 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the world of Autodesk 3ds Max, a 3D modeling, animation, and rendering software package developed by Autodesk Inc. It is widely used by architects, game developers, design visualization specialists, and visual effects artists. A wide range of modeling and texturing tools make it an ideal platform for 3D modelers and animators. The intuitive user interface and workflow tools of Autodesk 3ds Max have made the job of design visualization specialists easier. Autodesk 3ds Max 2018 for Beginners: A Tutorial Approach is a tutorial-based book that introduces the readers to the basic features of 3ds Max 2018 created on real world model through tutorials. The book caters to the needs of both the novice and the advanced users of the software. This book will help you unleash your creativity and help you create simple and complete 3D models and animations. The book will help the learners transform their imagination into reality with ease. Salient Features Consists of 17 chapters and 5 real world based projects that are organized in a pedagogical sequence covering various aspects of modeling, texturing, lighting, and animation. The author has followed the tutorial approach to explain various concepts of modeling, texturing, lighting, and animation. The first page of every chapter summarizes the topics that are covered in it. Step-by-step instructions that guide the users through the learning process. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation test, Review Questions are given at the end of each chapter so that the users can assess their knowledge. Student project has been given at the end of this book to test and enhance the skills of students. Table of Contents Chapter 1: Introduction to Autodesk 3ds Max 2018 Chapter 2: Primitive Objects - I Chapter 3: Primitive Objects - II Chapter 4: Working with Splines - I Chapter 5: Working with Splines - II Chapter 6: Lofting, Twisting, and Deforming Objects Chapter 7: Material Editor: Creating Materials Chapter 8: Material Editor: Texture Maps-I Chapter 9: Material Editor: Texture Maps-II Chapter 10: Material Editor: Controlling Texture Maps Chapter 11: Material Editor: Miscellaneous Materials Chapter 12: Interior Lighting-I Chapter 13: Interior Lighting-II Chapter 14: Animation Basics Chapter 15: Complex Animation Chapter 16: Rendering Chapter 17: Creating Walkthrough Project 1: Creating a Windmill Project 2: Creating a Diner Project 3: Architectural Project Project 4: Corporate Design Project Project 5: Creating a Computer Center Index

Download or read book Pixologic ZBrush 2020 A Comprehensive Guide 6th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2020-05-04 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pixologic ZBrush 2020: A Comprehensive Guide covers all features of ZBrush 2020 in a simple, lucid, and comprehensive manner. It gives in-depth details of the concepts and explains the usage and tools of ZBrush such as DynaMesh, NanoMesh, ZRemesher, ZModeler, NanoMesh, and KeyShot renderer. This book will unleash your creativity and transform your imagination into reality, thus helping you create realistic 3D models. In this edition, the author has provided detailed explanation of some new and enhanced concepts such as CamView and Spotlight. Moreover, new sculpting brushes like XTractor and HistoryRecall have been covered. Additionally, the concepts like Array, ZPlugin, and FiberMesh are explained with the help of step by step instructions. Salient Features Consists of 12 chapters & 1 project that are organized in a pedagogical sequence. Covers all aspects such as modeling, texturing, lighting, & animation in ZBrush. Tutorial approach to explain the concepts and usage of tools. First page of every chapter summarizes the topics that are covered in the chapter. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation test & Review Questions at the end of each chapter so that the users can assess their knowledge. Table of Contents Chapter 1: Exploring ZBrush Interface Chapter 2: Sculpting Brushes Chapter 3: Introduction to Digital Sculpting Chapter 4: SubTools and FiberMesh Chapter 5: ZSpheres Chapter 6: DynaMesh, NanoMesh, and ZRemesher Chapter 7: ShadowBox Chapter 8: Materials in ZBrush Chapter 9: Texturing in ZBrush Chapter 10: UV Master Chapter 11: Lighting Chapter 12: Rendering Project 1: Cartoon Character Modeling Index

Download or read book Autodesk Maya 2019 A Comprehensive Guide 11th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2018 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk Maya 2019 is a powerful, integrated 3D modeling, animation, visual effects, and rendering software developed by Autodesk Inc. This integrated node based 3D software finds its application in the development of films, games, and design projects. A wide range of 3D visual effects, computer graphics, and character animation tools make it an ideal platform for 3D artists. The intuitive user interface and workflow tools of Maya 2019 have made the job of design visualization specialists a lot easier. Autodesk Maya 2019: A Comprehensive Guide book covers all features of Autodesk Maya 2019 software in a simple, lucid, and comprehensive manner. It aims at harnessing the power of Autodesk Maya 2019 for 3D and visual effect artists, and designers. This Autodesk Maya 2019 book will help you transform your imagination into reality with ease. Also, it will unleash your creativity, thus helping you create realistic 3D models, animation, and visual effects. It caters to the needs of both the novice and advanced users of Maya 2019 and is ideally suited for learning at your convenience and at your pace. Salient Features: Consists of 17 chapters that are organized in a pedagogical sequence covering a wide range of topics such as Maya interface, Polygon modeling, NURBS modeling, texturing, lighting, cameras, animation, Paint Effects, Rendering, nHair, Fur, Fluids, Particles, nParticles and Bullet Physics in Autodesk Maya 2019. The first page of every chapter summarizes the topics that are covered in it. Consists of hundreds of illustrations and a comprehensive coverage of Autodesk Maya 2019 concepts & commands. Real-world 3D models and examples focusing on industry experience. Step-by-step instructions that guide the user through the learning process. Additional information is provided throughout the book in the form of tips and notes. Self-Evaluation test, Review Questions, and Exercises are given at the end of each chapter so that the users can assess their knowledge. Table of Contents Chapter 1: Exploring Maya Interface Chapter 2: Polygon Modeling Chapter 3: NURBS Curves and Surfaces Chapter 4: NURBS Modeling Chapter 5: UV Mapping Chapter 6: Shading and Texturing Chapter 7: Lighting Chapter 8: Animation Chapter 9: Rigging, Constraints, and Deformers Chapter 10: Paint Effects Chapter 11: Rendering Chapter 12: Particle System Chapter 13: Introduction to nParticles Chapter 14: Fluids Chapter 15: nHair Chapter 16: Bifrost Chapter 17: Bullet Physics Index

Download or read book Pixologic ZBrush 4R8 A Comprehensive Guide 4th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pixologic ZBrush 4R8: A Comprehensive Guide book covers all features of ZBrush 4R8 in a simple, lucid, and comprehensive manner. It gives in-depth details of the concepts and explains the usage and functions of ZBrush such as DynaMesh, NanoMesh, ZRemesher, ZModeler, NanoMesh, and KeyShot renderer. In this edition, new features such as Gizmo 3D and the Live Boolean mode, which is used to generate boolean results, have been explained. This book will unleash your creativity and transform your imagination into reality, thus helping you create realistic 3D models. This book caters to the needs of both the novice and advanced users of ZBrush 4R8 and is ideally suited for learning at your convenience and at your pace. Salient Features: Consists of 12 chapters and 1 project that are organized in a pedagogical sequence covering various aspects of modeling, texturing, lighting, and animation. The author has followed the tutorial approach to explain various concepts of modeling, texturing, lighting, and animation. The first page of every chapter summarizes the topics that will be covered in it. Step-by-step instructions that guide the users through the learning process. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation test and Review Questions are given at the end of each chapter so that the users can assess their knowledge. Table of Contents Chapter 1: Exploring ZBrush Interface Chapter 2: Sculpting Brushes Chapter 3: Introduction to Digital Sculpting Chapter 4: SubTools and FiberMesh Chapter 5: ZSpheres Chapter 6: DynaMesh, NanoMesh, and ZRemesher Chapter 7: ShadowBox Chapter 8: Materials in ZBrush Chapter 9: Texturing in ZBrush Chapter 10: UV Master Chapter 11: Lighting Chapter 12: Rendering Project 1: Cartoon Character Modeling Index

Download or read book Exploring Oracle Primavera P6 Professional 18 3rd Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring Oracle Primavera P6 Professional 18 book explains the concepts and principles of project management through practical examples, tutorials, and exercises. This enables the users to harness the power of managing projects with Oracle Primavera P6 for their specific use. In this book, the author emphasizes on planning, managing and controlling the projects, assigning resources and roles to a project, and producing schedule and resources reports and graphics. This book is specially meant for professionals and students in engineering, project management and allied fields in the building industry. Salient Features: Detailed explanation of Oracle Primavera concepts. Real-world projects given as tutorials. Tips and Notes throughout the book. 264 pages of illustrated text. Self-Evaluation Tests, Review Questions, and Exercises at the end of the chapters Table of Contents: Chapter 1: Getting Started with Primavera P6 Professional 18 Chapter 2: Creating Projects Chapter 3: Defining Calendars and Work Breakdown Structure Chapter 4: Working with Activities and Establishing Relationships Chapter 5: Defining Resources and Roles Chapter 6: Risks and Issues, and Setting Baselines Chapter 7: Project Expenses and Tracking Progress of Project Chapter 8: Printing Layouts and Reports Index

Download or read book Autodesk Inventor Professional 2020 for Designers 20th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk Inventor Professional 2020 for Designers is a comprehensive book that introduces the users to Autodesk Inventor 2020, a feature-based 3D parametric solid modeling software. All environments of this solid modelling software are covered in this book with a thorough explanation of commands, options, and their applications to create real-world products. The mechanical engineering industry examples that are used as tutorials and the related additional exercises at the end of each chapter help the users to understand the design techniques used in the industry to design a product. Additionally, the author emphasizes on the solid modelling techniques that will improve the productivity and efficiency of the users. After reading this book, the users will be able to create solid parts, sheet metal parts, assemblies, weldments, drawing views with bill of materials, presentation views to animate the assemblies and apply direct modelling techniques to facilitate rapid design prototyping. Also, the users will learn the editing techniques that are essential for making a successful design. Salient Features: Comprehensive book consisting of 19 chapters organized in a pedagogical sequence. Detailed explanation of all concepts, techniques, commands, and tools of Autodesk Inventor Professional 2020. Tutorial approach to explain the concepts. Step-by-step instructions that guide the users through the learning process. More than 54 real-world mechanical engineering designs as tutorials and projects. Self-Evaluation Test, Review Questions, and Exercises are given at the end of the chapters so that the users can assess their knowledge. Technical support by contacting '[email protected]'. Table of Contents Chapter 1: Introduction Chapter 2: Drawing Sketches for Solid Models Chapter 3: Adding Constraints and Dimensions to Sketches Chapter 4: Editing, Extruding, and Revolving the Sketches Chapter 5: Other Sketching and Modeling Options Chapter 6: Advanced Modeling Tools-I Chapter 7: Editing Features and Adding Automatic Dimensions to Sketches Chapter 8: Advanced Modeling Tools-II Chapter 9: Assembly Modeling-I Chapter 10: Assembly Modeling-II Chapter 11: Working with Drawing Views-I Chapter 12: Working with Drawing Views-II Chapter 13: Presentation Module Chapter 14: Working with Sheet Metal Components Chapter 15: Introduction to Stress Analysis Chapter 16: Introduction to Weldments (For free download) Chapter 17: Miscellaneous Tools (For free download) Chapter 18: Working with Special Design Tools For free download) Chapter 19: Introduction to Plastic Mold Design (For free download) Index

Download or read book MAXON CINEMA 4D R20 Studio A Tutorial Approach 7th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2019 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: MAXON CINEMA 4D R20 Studio: A Tutorial Approach is a tutorial-based book and aims at harnessing the power of MAXON CINEMA 4D R20 Studio software for modelers, animators, and designers. The book caters to the needs of both the novice and the advance users of MAXON CINEMA 4D R20 Studio. Keeping in view the varied requirements of users, the book first introduces the basic features of CINEMA 4D R20 Studio And then progresses to cover the advanced techniques. In this book, two projects based on the tools and concepts covered in the book have been added to enhance the knowledge of users. This book will help you unleash your creativity and transform your imagination into reality with ease. Salient Features: Consists of 13 Chapters and 2 Projects that are organized in a pedagogical sequence covering various aspects of modeling, sculpting texturing, lighting, rendering, and animation. The author has followed the tutorial approach to explain various concepts of modeling, texturing, lighting, and animation. The first page of every chapter summarizes the topics that are covered in it. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation Test and Review Questions are given at the end of each chapter so that the users can assess their knowledge. Table of Contents Chapter 1: Exploring CINEMA 4D R20 Studio Interface Chapter 2: Working with Splines Chapter 3: Introduction to Polygon Modeling Chapter 4: Sculpting Chapter 5: Texturing Chapter 6: Lighting Chapter 7: Rigging Chapter 8: Animation Chapter 9: Introduction to UV Mapping Chapter 10: Compositing 3D objects Chapter 11: Rendering Chapter 12: MoGraph Chapter 13: Working with XPresso Project 1: Creating an Indoor Scene Project 2: Texturing an Indoor Scene Index

Download or read book Exploring AutoCAD Civil 3D 2019 9th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2018 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring AutoCAD Civil 3D 2019 book introduces the users to the powerful Building Information Modeling (BIM) solution, AutoCAD Civil 3D. The BIM solution in AutoCAD Civil 3D helps create and visualize a coordinated data model. This data model can then be used to design and analyze a civil engineering project for its optimum and cost-effective performance. This book has been written considering the needs of the professionals such as engineers, surveyors, watershed and storm water analysts, land developers and CAD technicians, who wish to learn and explore the usage and abilities of AutoCAD Civil 3D in their respective domains. This book consists of 13 chapters covering Points Creations, Surface Creations, Surface Analysis, Corridor Modeling, Pipe Networks, Pressure Networks, and Parcels and so on. The chapters are organized in a pedagogical sequence to help users understand the concepts easily. Each chapter begins with a command section that provides a detailed explanation of the commands and tools in AutoCAD Civil 3D. The chapters in this book cover the basic as well as advanced concepts in AutoCAD Civil 3D such as COGO points, surfaces and surface analysis, alignments, profiles, sections, grading, assemblies, corridor modeling, earthwork calculations, and pipe and pressure networks. Salient Features: Consists of 13 chapters that are arranged in pedagogical sequence. Contains 808 pages, 50 tutorials, about 26 exercises, and more than 770 illustrations. Real-world engineering projects used in tutorials, exercises, and explaining various tools and concepts. Table of Contents Chapter 1: Introduction to AutoCAD Civil 3D 2019 Chapter 2: Working with Points Chapter 3: Working with Surfaces Chapter 4: Surface Volumes and Analysis Chapter 5: Alignments Chapter 6: Working with Profiles Chapter 7: Working with Assemblies and Subassemblies Chapter 8: Working with Corridors and Parcels Chapter 9: Sample Lines, Sections, and Quantity Takeoffs Chapter 10: Feature Lines and Grading Chapter 11: Pipe Networks Chapter 12: Pressure Networks Chapter 13: Working with Plan Production Tools, and Data Shortcuts Index

Download or read book Exploring Autodesk Navisworks 2019 5th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2019 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring Autodesk Navisworks 2019 is a comprehensive book that has been written to cater to the needs of the students and the professionals who are involved in the AEC profession. In Navisworks 2019 book, the author has emphasized on various hands on tools for real-time navigation, reviewing models, creating 4D and 5D simulation, quantifying various elements, performing clash detection, rendering, creating animation, and advanced tools for selection through tutorials and exercises. In this book, along with the main text, the chapters have been punctuated with tips and notes to give additional information on the concept, thereby enabling you to create your own innovative projects. Additionally, this book contains case studies of two real world BIM projects undertaken by The BIM Engineers. Salient Features: 404 pages of heavily illustrated text. Covers detailed description of the tools of Navisworks 2019. Explains the concepts using real-world projects and examples focusing on industry experience. Covers advanced functions such as creating visualizations with Autodesk Rendering. Includes an exercise on creating car animation using Animator and Scripter tool. Includes two case studies from projects of The BIM Engineers. Provides step-by-step explanation that guides the users through the learning process. Effectively communicates the utility of Navisworks 2019. Self-Evaluation Test and Review Questions at the end of chapters for reviewing the concepts learned in the chapters. Table of Contents Chapter 1: Introduction to Autodesk Navisworks 2019 Chapter 2: Exploring the Navigation Tools in Navisworks Chapter 3: Selecting, Controlling, and Reviewing Objects Chapter 4: Viewpoints, Sections, and Animations Chapter 5: TimeLiner Chapter 6: Working with Animator and Scripter Chapter 7: Quantification Chapter 8: Clash Detection Chapter 9: Autodesk Rendering in Navisworks Case Studies Index

Download or read book Exploring Autodesk Navisworks 2020 7th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2020-02-27 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring Autodesk Navisworks 2020 is a comprehensive book that has been written to cater to the needs of the students and professionals. The chapters in this book are structured in a pedagogical sequence, which makes the learning process very simple and effective for both the novice as well as the advanced users of Autodesk Navisworks. In this book, the author emphasizes on creating 4D simulation, performing clash detection, performing quantity takeoff, rendering, creating animation, and reviewing models through tutorials and exercises. In addition, the chapters have been punctuated with tips and notes, wherever necessary, to make the concepts clear, thereby enabling you to create your own innovative projects. Salient Features Comprehensive book consisting of 404 pages of heavily illustrated text. Detailed explanation of the commands and tools of Autodesk Navisworks. Tips and Notes throughout the book for providing additional information. Self-Evaluation Tests, Review Questions, and Exercises at the end of the chapters. Table of Contents Chapter 1: Introduction to Autodesk Navisworks 2020 Chapter 2: Exploring the Navigation Tools in Navisworks Chapter 3: Selecting, Controlling, and Reviewing Objects Chapter 4: Viewpoints, Sections, and Animations Chapter 5: TimeLiner Chapter 6: Working with Animator and Scripter Chapter 7: Quantification Chapter 8: Clash Detection Chapter 9: Autodesk Rendering in Navisworks Case Study Index

Download or read book MAXON CINEMA 4D R19 Studio A Tutorial Approach 6th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2018-01-25 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: MAXON CINEMA 4D R19 Studio: A Tutorial Approach book aims at harnessing the power of MAXON CINEMA 4D R19 Studio for modelers, animators, and motion graphic designers. The CINEMA 4D R19 book caters to the needs of both the novice and the advance users of CINEMA 4D R19. Keeping in view the varied requirements of users, the CINEMA 4D book first introduces the basic features and then progresses to cover the advanced techniques such as MoGraph, XPresso, and 3D Compositing. Salient Features: Consists of 13 chapters and 2 projects that are organized in a pedagogical sequence covering various aspects of modeling, texturing, lighting, and animation. The author has followed the tutorial approach to explain various concepts of modeling, texturing, lighting, and animation. The first page of every chapter summarizes the topics that are covered in it. Step-by-step instructions that guide the users through the learning process. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation test and Review Questions are given at the end of each chapter so that the users can assess their knowledge. Technical support by contacting '[email protected]'. Additional learning resources available at 'cinema4dexperts.blogspot.com'. Table of Contents Chapter 1: Exploring MAXON CINEMA 4D R19 Studio Interface Chapter 2: Working with Splines Chapter 3: Introduction to Polygon Modeling Chapter 4: Sculpting Chapter 5: Texturing Chapter 6: Lighting Chapter 7: Rigging Chapter 8: Animation Chapter 9: Introduction to UV Mpping Chapter 10: Composting in 3D Objects Chapter 11: Rendering Chapter 12: MoGraph Chapter 13: Working with XPresso Project 1: Creating an Indoor Scene Project 2: Texturing an Indoor Scene Index

Download or read book Blender 2 79 for Digital Artists written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blender 2.79 for Digital Artists book covers major features of Blender 2.79 in a simple, lucid, and comprehensive manner. Keeping in view the varied requirements of the users, the book introduces the basic features of Blender 2.79 and then gradually progresses to cover the advanced features. This book will help you unleash your creativity, thus helping you create stunning 3D models. The book will help the learners transform their imagination into reality with ease. Also, it takes the users through progressive tutorials, numerous illustrations, and ample exercises. Salient Features Consists of 11 chapters that are organized in a pedagogical sequence covering various aspects of modeling, sculpting, texturing, lighting, rigging, animation, rigid body dynamics, and particle system. The author has followed the tutorial approach to explain various concepts of modeling, texturing, lighting, and animation. The first page of every chapter summarizes the topics that are covered in it. Step-by-step instructions that guide the users through the learning process. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation Test and Review Questions are given at the end of each chapter so that the users can assess their knowledge. Table of Contents Chapter 1: Introduction to Blender Interface Chapter 2: Working with Mesh Primitives Chapter 3: Working with Curve Primitives Chapter 4: Working with Modifiers Chapter 5: Digital Sculpting Techniques Chapter 6: Working with Materials - I Chapter 7: Working with Materials - II Chapter 8: Lights and Cameras Chapter 9: Basics of Rigging and Animation Chapter 10: Rigid Body Dynamics Chapter 11: Working with Particles Index

Download or read book MAXON CINEMA 4D S24 A Tutorial Approach 8th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2021-10-29 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: MAXON CINEMA 4D S24: A Tutorial Approach is a tutorial-based book and aims at harnessing the power of MAXON CINEMA 4D S24 for modelers, animators, and designers. The book caters to the needs of both the novice and the advance users of MAXON CINEMA 4D S24. Keeping in view the varied requirements of users, the book first introduces the basic features of CINEMA 4D S24 and then progresses to cover the advanced techniques. In this book, three projects based on the tools and concepts covered in the book have been added to enhance the knowledge of users. The third project will enable the users to learn about some major enhancements in Cinema 4D S24 such as the Asset Browser and the new placement tools in depth. Salient Features Consists of 13 Chapters and 3 Projects that are organized in a pedagogical sequence covering various aspects of modeling, sculpting texturing, lighting, rendering, and animation. The author has followed the tutorial approach to explain various concepts of modeling, texturing, lighting, and animation. The first page of every chapter summarizes the topics that are covered in it. Step-by-step instructions that guide the users through the learning process. Additional information is provided throughout the book in the form of notes and tips. Self-Evaluation Test, Review Questions, and Exercises are given at the end of each chapter so that the users can assess their knowledge. Table of Contents Chapter 1: Exploring CINEMA 4D S24 Interface Chapter 2: Working with Splines Chapter 3: Introduction to Polygon Modeling Chapter 4: Sculpting Chapter 5: Texturing Chapter 6: Lighting Chapter 7: Rigging Chapter 8: Animation Chapter 9: Introduction to UV Mapping Chapter 10: Compositing 3D objects Chapter 11: Rendering Chapter 12: MoGraph Chapter 13: Working with XPresso Project 1: Creating an Indoor Scene Project 2: Texturing an Indoor Scene Project 3: Creating an Exterior Scene Index

Download or read book Exploring Autodesk Revit 2018 for Structure 8th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2017-09-01 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring Autodesk Revit 2018 for Structure is a comprehensive book that has been written to cater to the needs of the students and the professionals who are involved in the AEC profession. This book enables the users to harness the power of BIM with Autodesk Revit 2018 for Structure for their specific use. In this book, the author emphasizes on physical modeling, analytical modeling, rebar modeling, and quantity scheduling. Also, Revit 2018 for Structure book covers the description of various stages involved in analyzing the model in Robot Structural Analysis software. This book is specially meant for professionals and students in structural engineering, civil engineering, and allied fields in the building industry. In this book, along with the main text, the chapters have been punctuated with tips and notes to give additional information on the concept, thereby enabling you to create your own innovative project. Salient Features Detailed explanation of structural tools of Autodesk Revit Real-world structural projects given as tutorials Tips and Notes throughout the book 546 pages of heavily illustrated text Self-Evaluation Tests, Review Questions, and Exercises at the end of each chapter Table of Contents Chapter 1: Introduction to Autodesk Revit 2018 for Structure Chapter 2: Getting Started with a Structural Project Chapter 3: Setting up a Structural Project Chapter 4: Structural Columns and Walls Chapter 5: Foundations, Beams, Floors, and Open Web Joists Chapter 6: Editing Tools Chapter 7: Documenting Models and Creating Families Chapter 8: Standard Views, Details, and Schedules Chapter 9: 3D Views, Sheets, Analysis, Reinforcements Chapter 10: Linking Revit Model with Robot Structural Analysis Student Project Index

Download or read book SOLIDWORKS 2018 A Tutorial Approach 4th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2018: A Tutorial Approach introduces readers to SOLIDWORKS 2018 software, one of the world's leading parametric solid modeling packages. In this book, the author has adopted a tutorial-based approach to explain the fundamental concepts of SOLIDWORKS. This book has been written with the tutorial point of view and the learn-by-doing theme to help the users easily understand the concepts covered in it. The book consists of 12 chapters that are structured in a pedagogical sequence that makes the book very effective in learning the features and capabilities of the software. The book covers a wide range of topics such as Sketching, Part Modeling, Assembly Modeling, Drafting in SOLIDWORKS 2018. In addition, this book covers the basics of Mold Design, FEA, and SOLIDWORKS Simulation. Salient Features: Consists of 12 chapters that are organized in a pedagogical sequence. Tutorial approach to explain various concepts of SOLIDWORKS 2018. First page of every chapter summarizes the topics that are covered in it. Step-by-step instructions that guide the users through the learning process. Several real-world mechanical engineering designs as tutorials and projects. Additional information throughout the book in the form of notes and tips. Self-Evaluation Tests and Review Questions at the end of the chapters for the users to assess their knowledge. Technical support by contacting '[email protected]'. Additional learning resources at http://allaboutcadcam.blogspot.com. Table of Contents Chapter 1: Introduction to SOLIDWORKS 2018 Chapter 2: Drawing Sketches for Solid Models Chapter 3: Editing and Modifying Sketches Chapter 4: Adding Relations and Dimensions to Sketches Chapter 5: Advanced Dimensioning Techniques and Base Feature Options Chapter 6: Creating Reference Geometries Chapter 7: Advanced Modeling Tools-I Chapter 8: Advanced Modeling Tools-II Chapter 9: Assembly Modeling Chapter 10: Working with Drawing Views Chapter 11: Introduction to FEA and SOLIDWORKS Simulation Chapter 12: Introduction to Mold Design Student Project Index