Download or read book Atomic Scale Friction Measurements Using Friction Force Microscopy Part II Application to Magnetic Media written by and published by . This book was released on 1993 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic Force/Friction Force Microscopes (AFM/FFM) were used to study tribological properties of metal-particle tapes with two roughnesses, Co gamma Fe2O3 tapes (unwiped and wiped), and unlubricated and lubricated thin-film magnetic rigid disks (as-polished and standard textured). Nanoindentation studies showed that the hardness of the tapes through the magnetic coating is not uniform. These results are consistent with the fact that the tape surface is a composite and is not homogeneous. Nanoscratch experiments performed on magnetic tapes using silicon nitride tips revealed that deformation and displacement of tape surface material occurred after one pass under light loads approx. 100 nN). A comparison between friction force profiles and the corresponding surface roughness profiles of all samples tested shows a poor correlation between localized values of friction and surface roughness.
Download or read book Atomic Scale Friction Measurements Using Friction Force Microscopy Part 2 Application to Magnetic Media written by and published by . This book was released on 1993 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic Force/Friction Force Microscopes (AFM/FFM) were used to study tribological properties of metal-particle tapes with two roughnesses, Co-gamma Fe2O3 tapes (unwiped and wiped), and unlubricated and lubricated thin-film magnetic rigid disks (as-polished and standard textured). Nanoindentation studies showed that the hardness of the tapes through the magnetic coating is not uniform. These results are consistent with the fact that the tape surface is a composite and is not homogeneous. Nanoscratch experiments performed on magnetic tapes using silicon nitride tips revealed that deformation and displacement of tape surface material occurred after one pass under light loads (approx. 100 nN). A comparison between friction force profiles and the corresponding surface roughness profiles of all samples tested shows a poor correlation between localized values of friction and surface roughness. Detailed studies of friction and surface profiles demonstrate an excellent correlation between localized variation of the slope of the surface roughness along the sliding direction and the localized variation of friction. Atomic-scale friction in magnetic media and natural diamond appears to be due to adhesive and ratchet (roughness) mechanisms. Directionality in the local variation of atomic-scale friction data was observed as the samples were scanned in either direction, resulting from the scanning direction and the anisotropy in the surface topography. Atomic-scale coefficient of friction is generally found to be smaller than the macro coefficient of friction as there may be less ploughing contribution in atomic-scale measurements.
Download or read book Atomic Scale Friction Measurements Using Friction Force Microscopy Part 1 General Principles and New Measurement Techniques written by and published by . This book was released on 1993 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction force measurements using modified atomic force microscopy, called here Friction Force Microscopy (FFM), are becoming increasingly important in the understanding of fundamental mechanisms of friction, wear, and lubrication, and to study interfacial phenomena in micro- and nanostructures used in magnetic storage systems and Microelectromechanical Systems (MEMS). FFMs can be used to study engineering surfaces in dry or wet conditions. A review of existing designs of FFMs and methods of friction force measurements is presented. In terms of friction force measurements, there are important issues related to the basic operation and calibration of these instruments which have not been fully studied. A new method of measuring friction fore using a commercial FFM and a calibration Procedure for conversion of measured data to normal and friction forces are presented. Microscale friction data of selected materials are presented and discussed in light of macrofriction measurements.
Download or read book Tribology and Mechanics of Magnetic Storage Devices written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since January 1990, when the first edition ofthis first-of-a-kind book appeared, there has been much experimental and theoretical progress in the multi disciplinary subject of tribology and mechanics of magnetic storage devices. The subject has matured into a rigorous discipline, and many university tribology and mechanics courses now routinely contain material on magnetic storage devices. The major growth in the subject has been on the micro- and nanoscale aspects of tribology and mechanics. Today, most large magnetic storage industries use atomic force microscopes to image the magnetic storage components. Many companies use variations of AFMs such as friction force microscopes (FFMs) for frictional studies. These instruments have also been used for studying scratch, wear, and indentation. These studies are valuable in the fundamental understanding of interfacial phenomena. In the second edition, I have added a new chapter, Chapter 11, on micro and nanoscale aspects of tribology and mechanics of magnetic storage compo nents. This chapter presents the state of the art of the micro/nanotribology and micro/nanomechanics of magnetic storage components. In addition, typographical errors in Chapters 1 to 10 and the appendixes have been corrected. These additions update this book and make it more valuable to researchers of the subject. I am grateful to many colleagues and particularly to my students, whose work is reported in Chapter 11. I thank my wife, Sudha, who has been forbearing during the progress of the research reported in this chapter.
Download or read book Fundamentals of Tribology and Bridging the Gap Between the Macro and Micro Nanoscales written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word tribology was fIrst reported in a landmark report by P. Jost in 1966 (Lubrication (Tribology)--A Report on the Present Position and Industry's Needs, Department of Education and Science, HMSO, London). Tribology is the science and technology of two interacting surfaces in relative motion and of related subjects and practices. The popular equivalent is friction, wear and lubrication. The economic impact of the better understanding of tribology of two interacting surfaces in relative motion is known to be immense. Losses resulting from ignorance of tribology amount in the United States alone to about 6 percent of its GNP or about $200 billion dollars per year (1966), and approximately one-third of the world's energy resources in present' use, appear as friction in one form or another. A fundamental understanding of the tribology of the head-medium interface in magnetic recording is crucial to the future growth of the $100 billion per year information storage industry. In the emerging microelectromechanical systems (MEMS) industry, tribology is also recognized as a limiting technology. The advent of new scanning probe microscopy (SPM) techniques (starting with the invention of the scanning tunneling microscope in 1981) to measure surface topography, adhesion, friction, wear, lubricant-fIlm thickness, mechanical properties all on a micro to nanometer scale, and to image lubricant molecules and the availability of supercomputers to conduct atomic-scale simulations has led to the development of a new fIeld referred to as Microtribology, Nanotribology, or Molecular Tribology (see B. Bhushan, J. N. Israelachvili and U.
Download or read book Introduction to Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-14 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments. In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included. Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view Newly updated chapter covers both the underlying theory and the current applications of tribology to industry Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics
Download or read book Nanotribology and Nanomechanics II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference and textbook serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. Assuming some familiarity with macroscopic tribology, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts.
Download or read book Handbook of Friction Vibration Interactions written by Gang Sheng Chen and published by Elsevier. This book was released on 2014-07-10 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-vibration interactions are common but important phenomena in science and engineering. Handbook of Friction-Vibration Interactions introduces the principles and provides the resources to understand and work with them. A unified theoretical framework includes some of the most important engineering applications. The first three chapters in the book introduce basic concepts and analytical methods of friction and vibration. The fourth chapter presents the general principles on friction-vibration interactions, and also touches on various engineering applications. In the fifth chapter the concepts and methods are extended to some of the most critical engineering applications in high-tech industry, presenting the friction-vibration interaction principle and applications in data storage systems. Covers a key topic in science and engineering, with applications in daily life Introduces the principles of friction-vibration interactions Analyzes, presents experiments, and treats real systems ranging from nano to micro to macro scales
Download or read book Applied Scanning Probe Methods I written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2014-02-26 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining the physical and technical foundation for recent progress with this technique, Applied Scanning Probe Methods offers a timely and comprehensive overview of SPM applications, now that industrial applications span topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. First it lays the theoretical background of static and dynamic force microscopies, including sensor technology and tip characterization, contributions detail applications such as macro- and nanotribology, polymer surfaces, and roughness investigations. The final part on industrial research addresses special applications of scanning force nanoprobes such as atomic manipulation and surface modification, as well as single electron devices based on SPM.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1994 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineering Handbook written by Richard C. Dorf and published by CRC Press. This book was released on 2018-10-03 with total page 3080 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1995, The Engineering Handbook quickly became the definitive engineering reference. Although it remains a bestseller, the many advances realized in traditional engineering fields along with the emergence and rapid growth of fields such as biomedical engineering, computer engineering, and nanotechnology mean that the time has come to bring this standard-setting reference up to date. New in the Second Edition 19 completely new chapters addressing important topics in bioinstrumentation, control systems, nanotechnology, image and signal processing, electronics, environmental systems, structural systems 131 chapters fully revised and updated Expanded lists of engineering associations and societies The Engineering Handbook, Second Edition is designed to enlighten experts in areas outside their own specialties, to refresh the knowledge of mature practitioners, and to educate engineering novices. Whether you work in industry, government, or academia, this is simply the best, most useful engineering reference you can have in your personal, office, or institutional library.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotribology and Nanomechanics written by Bharat Bhushan and published by Springer. This book was released on 2017-04-05 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook and comprehensive reference source and serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. This 4th edition has been completely revised and updated, concentrating on the key measurement techniques, their applications, and theoretical modeling of interfaces. It provides condensed knowledge of the field from the mechanics and materials science perspectives to graduate students, research workers, and practicing engineers.
Download or read book Tribology Issues and Opportunities in MEMS written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise.
Download or read book Modern Tribology Handbook Two Volume Set written by Bharat Bhushan and published by CRC Press. This book was released on 2000-12-28 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational
Download or read book Principles and Applications of Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-15 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated Second Edition provides the reader with the solid understanding of tribology which is essential to engineers involved in the design of, and ensuring the reliability of, machine parts and systems. It moves from basic theory to practice, examining tribology from the integrated viewpoint of mechanical engineering, mechanics, and materials science. It offers detailed coverage of the mechanisms of material wear, friction, and all of the major lubrication techniques - liquids, solids, and gases - and examines a wide range of both traditional and state-of-the-art applications. For this edition, the author has included updates on friction, wear and lubrication, as well as completely revised material including the latest breakthroughs in tribology at the nano- and micro- level and a revised introduction to nanotechnology. Also included is a new chapter on the emerging field of green tribology and biomimetics.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 1968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 2004 and with the 2nd edition in 2006, the Springer Handbook of Nanotechnology has established itself as the definitive reference in the nanoscience and nanotechnology area. It integrates the knowledge from nanofabrication, nanodevices, nanomechanics, Nanotribology, materials science, and reliability engineering in just one volume. Beside the presentation of nanostructures, micro/nanofabrication, and micro/nanodevices, special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. In its 3rd edition, the book grew from 8 to 9 parts now including a part with chapters on biomimetics. More information is added to such fields as bionanotechnology, nanorobotics, and (bio)MEMS/NEMS, bio/nanotribology and bio/nanomechanics. The book is organized by an experienced editor with a universal knowledge and written by an international team of over 150 distinguished experts. It addresses mechanical and electrical engineers, materials scientists, physicists and chemists who work either in the nano area or in a field that is or will be influenced by this new key technology.
