Download or read book Asymmetric Gearing written by Alexander L. Kapelevich and published by CRC Press. This book was released on 2018-08-06 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of gears with asymmetric teeth is not sufficiently recorded in modern gear literature, with some gear researchers concluding that asymmetric tooth gears were discovered just several decades ago. This book sheds light upon the origins and state of asymmetric gearing, referencing technical articles from the 19th, 20th, and 21st centuries. As a practicing gear engineer with over 40 years’ experience, author Alexander L. Kapelevich has successfully implemented asymmetric gears in a variety of custom gear transmissions. This book addresses all aspects of asymmetric gear development, including theoretical fundamentals; tooth geometry optimization; stress analysis and rating; design and production specifics; analytical and experimental comparison to the best symmetric gears; and application examples. Readers are encouraged to look beyond the status quo established by traditional gear design, and to apply principles of asymmetric gearing to actual gear design. Optimal solutions are presented for gear drives that will maximize technical performance and marketability. Features Presents a state-of the-art, comprehensive historical overview of asymmetric gearing Explains the Direct Gear Design® approach to asymmetric gear design Describes asymmetric tooth gear geometry optimization, areas of existence, and parameter selection limits Considers practical aspects of asymmetric gear fabrication and measurement Presents analytical and experimental comparison of asymmetric gears to advanced symmetric gears, showing the advantages of asymmetric designs Provides numerous real-world examples of asymmetric gear application

Download or read book Asymmetric Gearing written by Alexander L. Kapelevich and published by CRC Press. This book was released on 2018-08-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of gears with asymmetric teeth is not sufficiently recorded in modern gear literature, with some gear researchers concluding that asymmetric tooth gears were discovered just several decades ago. This book sheds light upon the origins and state of asymmetric gearing, referencing technical articles from the 19th, 20th, and 21st centuries. As a practicing gear engineer with over 40 years’ experience, author Alexander L. Kapelevich has successfully implemented asymmetric gears in a variety of custom gear transmissions. This book addresses all aspects of asymmetric gear development, including theoretical fundamentals; tooth geometry optimization; stress analysis and rating; design and production specifics; analytical and experimental comparison to the best symmetric gears; and application examples. Readers are encouraged to look beyond the status quo established by traditional gear design, and to apply principles of asymmetric gearing to actual gear design. Optimal solutions are presented for gear drives that will maximize technical performance and marketability. Features Presents a state-of the-art, comprehensive historical overview of asymmetric gearing Explains the Direct Gear Design® approach to asymmetric gear design Describes asymmetric tooth gear geometry optimization, areas of existence, and parameter selection limits Considers practical aspects of asymmetric gear fabrication and measurement Presents analytical and experimental comparison of asymmetric gears to advanced symmetric gears, showing the advantages of asymmetric designs Provides numerous real-world examples of asymmetric gear application

Download or read book Direct Gear Design written by Alexander L. Kapelevich and published by CRC Press. This book was released on 2013-03-22 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several decades, gearing development has focused on improvements in materials, manufacturing technology and tooling, thermal treatment, and coatings and lubricants. In contrast, gear design methods have remained frozen in time, as the vast majority of gears are designed with standard tooth proportions. This over-standardization signif

Download or read book Theory and Practice of Gearing and Transmissions written by Veniamin Goldfarb and published by Springer. This book was released on 2015-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together papers from all spheres of mechanical engineering related to gears and transmissions, from fundamentals to advanced applications, from academic results in numerical and experimental research, to new approaches to gear design and aspects of their optimization synthesis and to the latest developments in manufacturing. Furthermore, this volume honours the work of Faydor L. Litvin on the 100th anniversary of this birth. He is acknowledged as the founder of the modern theory of gearing. An exhaustive list of his contributions and achievements and a biography are included.

Download or read book Direct Gear Design written by Alexander L. Kapelevich and published by CRC Press. This book was released on 2021-05-31 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated and improved second edition of Direct Gear Design details a nonstandard gear design approach that makes it possible to significantly improve gear drive performance. Providing engineers with gear design solutions beyond standard limits, this book delivers engineers with practical and innovative solutions to optimize gearing technologies. The majority of modern gears are over-standardized, not allowing gear design engineers to see possible gear design solutions outside of standard limits. The book explores opportunities to improve and optimize gears beyond these limitations. The method of Direct Gear Design has been proven to maximise gear drive performance, increase transmission load capacity and efficiency, and reduce size and weight. Discussing the use of gears made from powder metal and plastic, the book surveys gear manufacture and makes use of extensive references to encourage further exploration of gear design innovation. Additionally, the book provides an overview of manufacturing technologies and traditional gear design, as well as covering topics such as asymmetric gears, tolerance selection and measurement methods of custom gears. Written accessibly, with a focus on practical examples, this fully updated edition will serve as a guidebook for all professionals exploring high-performance gearing system technologies.

Download or read book Advances in Gear Theory and Gear Cutting Tool Design written by Stephen P. Radzevich and published by Springer Nature. This book was released on 2022-07-01 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written by a team of leading gear experts from across the globe, including contributions from USA, Germany, Poland, China, Russia, Ukraine, and Belarus. It provides readers with the latest accomplishments in the gear theory and gear cutting tool design. Specialists can apply competencies gained from this book to quality control in gear manufacture, as well as to the conditions of their production. The book begins with a detailed discussion of the kinematics and geometry of geometrically-accurate gears and gear systems. This is followed by an analysis of state-of-the-art gear manufacturing methods with focus on gear finishing operations. Novel designs of gear transmission systems as well as gear theory and gear cutting tool design are also covered.

Download or read book Gears in Design Production and Education written by Natalya Barmina and published by Springer Nature. This book was released on 2021-05-31 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the fourth volume in the series devoted to gear engineering and computer-aided design, production, testing and education. It comprises fundamental and applied research contributions by scientists and gear experts from all the world and covers recent developments and historical achievements in various spheres of mechanical engineering related to different kinds of gears, transmissions, and drive systems. It gathers contributions describing the advanced approaches to research, design, testing and production of practically all common and new kinds of gears for a vast number of advanced applications. Special attention is paid to issues of higher education in the field of gears. The book is intended as a tribute to professor Veniamin Goldfarb (1941-2019), one of the world-known leaders in the field of gear research, education and production, who contributed much to the active international cooperation of gear experts and to promotion of MMS science. The introductory chapter of this book relates his research to major developments in the field of mechanisms and machine science and outlines important contributions that he made within the period of 1964-2019.

Download or read book Dudley s Handbook of Practical Gear Design and Manufacture written by Stephen P. Radzevich and published by CRC Press. This book was released on 2016-09-15 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dudley's Handbook of Practical Gear Design & Manufacture, Third Edition, is the definitive reference work for gear design, production, inspection, and application. This fully updated edition provides practical methods of gear design, and gear manufacturing methods, for high-, medium-, and low-volume production. Comprehensive tables and references are included in the text and in its extensive appendices, providing an invaluable source information for all those involved in the field of gear technology.

Download or read book Power Transmissions written by Datong Qin and published by CRC Press. This book was released on 2016-11-10 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications. The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.

Download or read book Advances in Gear Design and Manufacture written by Stephen P. Radzevich and published by CRC Press. This book was released on 2019-04-30 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Gear Design and Manufacture deals with gears, gear transmissions, and advanced methods of gear production.The book is focused on discussion of the latest discoveries and accomplishments in gear design and production, with chapters written by international experts in the field. Topics are aligned to meet the requirements of the modern scientific theory of gearing, providing readers precise knowledge and recommendations on how perfect gears and gear transmissions can be designed and produced, and how they work. It explains how gears and gear transmissions can be designed to reach high a “power-to-weight” ratio, and how to design and produce compact, high-capacity gearboxes.

Download or read book Advances n Mechanical Engineering written by and published by Allied Publishers. This book was released on 2010 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Note written by and published by . This book was released on 1976 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Mechanics on Emerging Energy Systems and Materials Volume 5 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-13 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the fifth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 25 chapters on Emerging Energy Systems. It presents early findings from experimental and computational investigations including Material State Changes in Heterogeneous Materials for Energy Systems, Characterization of Carbon Nanotube Foam for Improved Gas Storage Capability, Thermoresponsive Microcapsules for Autonomic Lithium-ion Battery Shutdown, Service Life Prediction of Seal in PEM Fuel Cells, and Assessing Durability of Elastomeric Seals for Fuel Cell Applications.

Download or read book International Gear Conference 2014 26th 28th August 2014 Lyon written by Philippe Velex and published by Chandos Publishing. This book was released on 2014-09-18 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Gear Conference 2014, held in Lyon, 26th-28th August 2014. Mechanical transmission components such as gears, rolling element bearings, CVTs, belts and chains are present in every industrial sector and over recent years, increasing competitive pressure and environmental concerns have provided an impetus for cleaner, more efficient and quieter units. Moreover, the emergence of relatively new applications such as wind turbines, hybrid transmissions and jet engines has led to even more severe constraints. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and range of applications (aerospace, automotive, wind turbine, and others) including topical issues such as power losses and efficiency, gear vibrations and noise, lubrication, contact failures, tribo-dynamics and nano transmissions. A truly international contribution with more than 120 papers from all over the world A judicious balance between fundamental research and industrial concerns Participation of the most respected international experts in the field of gearing A wide range of applications in terms of size, power, speed, and industrial sector

Download or read book Advances in Power Transmission Science and Technology written by Ze Yong Yin and published by Trans Tech Publications Ltd. This book was released on 2011-08-16 with total page 945 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This volume comprises a selection of 202 papers covering all of the latest advances and developments in design, modeling and analysis, materials manufacturing and testing, and their engineering applications in power transmission systems. It will provide readers with a broad overview of recent progress and achievements in the field of power transmission.

Download or read book Trends in Mechanical and Biomedical Design written by Esther Titilayo Akinlabi and published by Springer Nature. This book was released on 2020-08-20 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers presented at the International Conference on Mechanical Engineering Design (ICMechD) 2019. The volume focuses on the recent trends in design research and their applications across the mechanical and biomedical domain. The book covers topics like tribology design, mechanism and machine design, wear and surface engineering, vibration and noise engineering, biomechanics and biomedical engineering, industrial thermodynamics, and thermal engineering. Case studies citing practical challenges and their solutions using appropriate techniques and modern engineering tools are also discussed. Given its contents, this book will prove useful to students, researchers as well as practitioners.

Download or read book Direct Gear Design written by Alexander L. Kapelevich and published by CRC Press. This book was released on 2013-03-22 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several decades, gearing development has focused on improvements in materials, manufacturing technology and tooling, thermal treatment, and coatings and lubricants. In contrast, gear design methods have remained frozen in time, as the vast majority of gears are designed with standard tooth proportions. This over-standardization significantly limits the potential performance of custom gear drives, especially in demanding aerospace or automotive applications. Direct Gear Design introduces an alternate gear design approach to maximize gear drive performance in custom gear applications. Developed by the author, the Direct Gear Design® method has been successfully implemented in a wide variety of custom gear transmissions over the past 30 years. The results are maximized gear drive performance, increased transmission load capacity and efficiency, and reduced size and weight. This book explains the method clearly, making it easy to apply to actual gear design. Describes the origin and theoretical foundations of the Direct Gear Design approach as well as some of its applications—and its limits Details the optimization techniques and the specifics of Direct Gear Design Discusses how this approach can be used with asymmetric gears to further improve performance Describes tolerance selection, manufacturing technologies, and measurement methods of custom gears Compares Direct Gear Design with traditional gear design from both an analytical and an experimental perspective Illustrates the applicability and benefits of this gear design approach with implementation examples Written by an engineer for engineers, this book presents a unique alternative to traditional gear design. It inspires readers to explore ways of improving gear transmission performance in custom gear applications, from higher transmission load capacity, efficiency, and reliability to lower size, weight, and cost.