Download or read book Assembly Line Balancing Improvement written by Siti Farahin Badrul Hisham and published by . This book was released on 2013 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: Line balancing is about arranging a production line so that there is an even flow of production from one work station to the next. Line balancing also a successful tool to reduce bottleneck by balancing the task time of each work station so that there is no delays and nobody is overburden with their task. This thesis presents a case study on a line balancing problem in an electronic company and the study focused on assembly line 11 and 12 which produced inductor model HA00-08464 LFTR. This study aims to improve the productivity and line efficiency also to recommend improvement activities based on the line balancing and analysis done in the simulation model. The simulation was done by using Tecnomatix Plant Simulation. All the data needed for the line balancing analysis was collected and a line balancing model equipped with manual calculation was done. This data gathered is then simulated in Tecnomatix Plant Simulation. Among the improvement activities conducted in order to balance the line was combining a few process into one, transformation from manual process to mechanization, and removing waste from the line. Throughout the study, three layouts were proposed. Among these three layouts only one will be proposed to the company. The layout proposed has a better line efficiency and rate of productivity.
Download or read book Analysis and Improvement in an Assembly Line Through Line Balancing and Work Design written by Irene Yuh Fang Chang and published by . This book was released on 2010 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Basics of Self Balancing Processes written by Gordon Ghirann and published by CRC Press. This book was released on 2017-07-27 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-Balancing is not just a tweak or change to assembly line balancing, but a completely transformed method for achieving continuous flow. Among the reasons you should try Self-Balancing is that you can expect a productivity improvement of at least 30 percent with improvements of 50-60 percent quite common. Using a well-tested method for successful improvements initiated by the author, The Basics of Self-Balancing Processes: True Lean Continuous Flow is the first book to explain how to achieve continuous flow in both simple and complex manufacturing environments. It describes how to recognize and resolve weak links to ensure continuous flow in your manufacturing operations. The book offers rules, tools, and guidelines to help you not only solve problems at the root, but even eliminate them before they start. It reviews the shortcomings of traditional assembly line balancing and walks readers through the new paradigm of Self-Balancing. The text includes a comprehensive overview that demonstrates the power, flexibility, and breakthroughs possible with this method. Offering solutions to the shortcomings associated with standard line balancing including inventory buffers, variation, and operator pace it provides you with the tools and understanding required to deal with batch and off-line processes, debug your line, arrange your parts and tools, and design your own Self-Balanced cells. Watch Gordon Ghirann discuss how his book can increase the productivity of your business. http://www.youtube.com/watch?v=yte0622XbcI&feature=youtu.be
Download or read book Productivity Improvement in a Driving Gear Frame Assembly Line by Using Line Balancing and Simulation written by Say Voon Ooi and published by . This book was released on 2012 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Conference on Modern Research in Aerospace Engineering written by Sanjay Singh and published by Springer. This book was released on 2018-02-09 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presenting the latest advances in aerospace and related engineering fields. The papers are organized according to six broad areas (i) Aerospace Propulsion, (ii) Space Research, Avionics and Instrumentation, (iii) Aerodynamics Wind Tunnel and Computational fluid dynamics (CFD), (iv) Structural Analysis and Finite Element Method (FEM), (v) Materials, Manufacturing and Air Safety and (vi) Aircraft Environmental and Control System and Stability, making it easy for readers to find the information they require. Offering insights into the state of the art in aerospace engineering, the original research presented is valuable to academics, researchers, undergraduate and postgraduate students as well as professionals in industry and R&D. The clearly written book can be used for the validation of data, and the development of experimental and simulation techniques as well as other mathematical approaches.
Download or read book Kaizen Assembly written by Chris A. Ortiz and published by CRC Press. This book was released on 2006-06-26 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is easy to learn the philosophy and the concepts of kaizen. It is quite another challenge to translate the philosophy into action. While most books expound on the underlying principles and theory, Kaizen Assembly: Designing, Constructing, and Managing a Lean Assembly Line takes you step-by-step through an actual kaizen event. This approach demon
Download or read book Current Techniques for Assembly Line Balancing written by Terry B. Kluge and published by . This book was released on 1981 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the basic considerations required to generate and manage an assembly line balance within a manufacturing facility. The problem of balancing an assembly line is observed in the form of a deterministic line balancing method. The purpose is to search academically and experientially for improvement in the process of balancing production assembly lines. The assembly line balance concepts are discussed in a predetermined hierarchy of importance as realized from the author's experience with, and analysis of manufacturing organizations. The suggestions throughout the study are intended to provide management personnel with a sense of self-imposed objectives and perspective on the proper evaluation of the whole system and its components. Methods, diagramming, and modeling are inclusive essentials to support this research.
Download or read book The Use of Dynamic state dependent Assembly line Balancing to Improve Throughput written by Jose Ostolaza and published by . This book was released on 1989 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assembly Line Planning and Control written by Nick T. Thomopoulos and published by Springer Science & Business Media. This book was released on 2013-09-11 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assembly Line Planning and Control describes the basic fundamentals of assembly lines for single model lines, mixed model make-to-stock lines, mixed model make-to-order lines and for one-station assembly. The book shows how to select the quantity of units to schedule for a shift duration, compute the number of operators needed on a line, set the conveyor speed, coordinate the main line with sub-assembly lines, assign the work elements to the operators on the line, sequence the models down the line, sequence the jobs down the line, calculate the part and component requirements for a line and for each station, determine the replenish needs of the parts and components from the suppliers, compute the similarity between the models being produced and show applications, use learning curves to estimate time and costs of assembly, and measure the efficiency of the line. The material is timeless and the book will never become obsolete. The author presents solutions with easy-to-understand numerical examples that can be applied to real-life applications.
Download or read book Handbook of Neural Computation written by Pijush Samui and published by Academic Press. This book was released on 2017-07-18 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Neural Computation explores neural computation applications, ranging from conventional fields of mechanical and civil engineering, to electronics, electrical engineering and computer science. This book covers the numerous applications of artificial and deep neural networks and their uses in learning machines, including image and speech recognition, natural language processing and risk analysis. Edited by renowned authorities in this field, this work is comprised of articles from reputable industry and academic scholars and experts from around the world. Each contributor presents a specific research issue with its recent and future trends. As the demand rises in the engineering and medical industries for neural networks and other machine learning methods to solve different types of operations, such as data prediction, classification of images, analysis of big data, and intelligent decision-making, this book provides readers with the latest, cutting-edge research in one comprehensive text. - Features high-quality research articles on multivariate adaptive regression splines, the minimax probability machine, and more - Discusses machine learning techniques, including classification, clustering, regression, web mining, information retrieval and natural language processing - Covers supervised, unsupervised, reinforced, ensemble, and nature-inspired learning methods
Download or read book Assembly Line Design written by Brahim Rekiek and published by Springer Science & Business Media. This book was released on 2006-04-21 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient assembly line design is a problem of considerable industrial importance. Assembly Line Design will be bought by technical personnel working in design, planning and production departments in industry as well as managers in industry who want to learn more about concurrent engineering. This book will also be purchased by researchers and postgraduate students in mechanical, manufacturing or micro-engineering.
Download or read book Assembly Line Rebalancing with Non constant Task Time Attribute written by Yuchen Li and published by . This book was released on 2016 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assembly line has been widely used in producing complex items, such as automobiles and other transportation equipment, household appliances and electronic goods. Assembly line balancing is to maximize the efficiency of the assembly line so that the optimal production rate or optimal length of the line is obtained. Since the 1950s there has been a plethora of research studies focusing on the methodologies for assembly line balancing. Methods and algorithms were developed to balance an assembly line, which is operated by human workers, in a fast and efficient fashion. However, more and more assembly lines are incorporating automation in the design of the line, and in that case the line balancing problem structure is altered. For these automated assembly lines, novel algorithms are provided in this dissertation to efficiently solve the automated line balancing problem when the assembly line includes learning automata. Recent studies show that the task time can be improved during production due to machine learning, which gives the opportunities to rebalance the assembly line as the improvements occur and are observed. The concept of assembly line rebalancing or task reassignment are crucial for the assembly which is designed for small volume production because of the demand variation and rapid innovation of new product. In this dissertation, two forms of rebalancing are provided, forward planning and real time adjustment. The first one is to develop a planning schedule before production begins given the task time improvement is deterministic. The second one is to rebalance the line after the improvements are realized given the task time improvement is random. Algorithms address one sided and two sided assembly lines are proposed. Computation experiments are performed in order to test the performance of the novel algorithms and empirically validate the merit of improvement of production statistics.
Download or read book Enhancing Future Skills and Entrepreneurship written by Kuldip Singh Sangwan and published by Springer Nature. This book was released on 2020-07-27 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents the proceedings of the 3rd Indo-German Conference on Sustainability in Engineering held at Birla Institute of Technology and Science, Pilani, India, on September 16–17, 2019. Intended to foster the synergies between research and education, the conference is one of the joint activities of the BITS Pilani and TU Braunschweig conducted under the auspices of Indo-German Center for Sustainable Manufacturing, established in 2009. The book is divided into three sections: engineering, education and entrepreneurship, covering a range of topics, such as renewable energy forecasting, design & simulation, Industry 4.0, and soft & intelligent sensors for energy efficiency. It also includes case studies on lean and green manufacturing, and life cycle analysis of ceramic products, as well as papers on teaching/learning methods based on the use of learning factories to improve students’problem-solving and personal skills. Moreover, the book discusses high-tech ideas to help the large number of unemployed engineering graduates looking for jobs become tech entrepreneurs. Given its broad scope, it will appeal to academics and industry professionals alike.
Download or read book Assembly Line written by Waldemar Grzechca and published by BoD – Books on Demand. This book was released on 2011-08-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: An assembly line is a manufacturing process in which parts are added to a product in a sequential manner using optimally planned logistics to create a finished product in the fastest possible way. It is a flow-oriented production system where the productive units performing the operations, referred to as stations, are aligned in a serial manner. The present edited book is a collection of 12 chapters written by experts and well-known professionals of the field. The volume is organized in three parts according to the last research works in assembly line subject. The first part of the book is devoted to the assembly line balancing problem. It includes chapters dealing with different problems of ALBP. In the second part of the book some optimization problems in assembly line structure are considered. In many situations there are several contradictory goals that have to be satisfied simultaneously. The third part of the book deals with testing problems in assembly line. This section gives an overview on new trends, techniques and methodologies for testing the quality of a product at the end of the assembling line.
Download or read book Matheuristics written by Vittorio Maniezzo and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metaheuristics support managers in decision-making with robust tools that provide high-quality solutions to important applications in business, engineering, economics, and science in reasonable time frames, but finding exact solutions in these applications still poses a real challenge. However, because of advances in the fields of mathematical optimization and metaheuristics, major efforts have been made on their interface regarding efficient hybridization. This edited book will provide a survey of the state of the art in this field by providing some invited reviews by well-known specialists as well as refereed papers from the second Matheuristics workshop to be held in Bertinoro, Italy, June 2008. Papers will explore mathematical programming techniques in metaheuristics frameworks, and especially focus on the latest developments in Mixed Integer Programming in solving real-world problems.
Download or read book Productivity Improvement of a Manual Assembly Line written by Pranavi Yerasi and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The current project addresses the productivity improvement of a manual assembly line by making use of operations analysis in the framework of Lean production. A methodology is proposed that helps to improve the productivity of any production process. The methodology consists of selecting a product or product family to be studied followed by current process study. Once the existing process is documented, all the assembly tasks involved must be timed using time study techniques. Operations analysis enables the reduction of non-productive tasks and results in a set of standardized work elements along with the set of standard procedures for performing the operations. Assembly line balancing along with the associated operations analysis assists in constructing or re-configuring an assembly system, which is the key step in improving the overall performance of an assembly line. Following this approach, two manual assembly line configurations (single stage parallel line and five-stage serial line) are constructed for a case study. The results show that by changing over to the single stage assembly line configuration the operator productivity is doubled when compared to the existing assembly method.
Download or read book Network Models and Optimization written by Mitsuo Gen and published by Springer Science & Business Media. This book was released on 2008-07-10 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network models are critical tools in business, management, science and industry. “Network Models and Optimization” presents an insightful, comprehensive, and up-to-date treatment of multiple objective genetic algorithms to network optimization problems in many disciplines, such as engineering, computer science, operations research, transportation, telecommunication, and manufacturing. The book extensively covers algorithms and applications, including shortest path problems, minimum cost flow problems, maximum flow problems, minimum spanning tree problems, traveling salesman and postman problems, location-allocation problems, project scheduling problems, multistage-based scheduling problems, logistics network problems, communication network problem, and network models in assembly line balancing problems, and airline fleet assignment problems. The book can be used both as a student textbook and as a professional reference for practitioners who use network optimization methods to model and solve problems.
