Download or read book Asphalt Material Design Inputs for Use with the Mechanistic empirical Pavement Design Guide in Virginia written by Alex K. Apeagyei and published by . This book was released on 2011 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Guide for the Mechanistic-Empirical Design of New & Rehabilitated Pavement Structures (MEPDG), developed under NCHRP Project 1-37A and recently adopted by the American Association of State Highway and Transportation Officials (AASHTO), offers an improved methodology for pavement design and evaluation. To achieve this improved prediction capability, the MEPDG procedure requires fundamental material properties in addition to certain empirically determined binder and mixture properties as design inputs. One of the key tasks identified by the Virginia Department of Transportation's (VDOT) Asphalt Concrete MEPDG Committee was the laboratory characterization of asphalt mixtures commonly used in Virginia to generate a catalog of the MEPDG-required design inputs. The purpose of this study was to evaluate, compile, and present asphalt material properties in a format that could be readily used in the MEPDG software and to develop a comprehensive catalog of MEPDG design input parameters for pavement design in Virginia. To achieve this objective, 18 asphalt concrete mixtures, sampled from seven of the nine VDOT districts, were tested using a battery of MEPDG-required tests including dynamic modulus (E*), flow number (FN), creep compliance, tensile strength, and beam fatigue tests. Testing involving binder and volumetric properties of the mixtures was also conducted. Finally, rut tests using the asphalt pavement analyzer (APA), a standard VDOT test protocol, were conducted to enable a direct comparison of the APA and FN test results. On the basis of these tests, suggestions for additional studies were made. The results of the study were presented in a form matching the MEPDG input format, and a catalog of design input parameters was developed for the 18 asphalt concrete mixtures. Included in the catalog were binder stiffness, mixture E*, mixture gradation, and mixture volumetric properties that would enable a designer the flexibility to select the desired input level (1, 2, or 3) depending on the pavement type. An illustrative example of how the developed inputs could be implemented using the MEPDG software was also provided. The results showed that E* master curves of asphalt mixtures obtained using the five standard testing temperatures described in AASHTO TP 62 could be obtained by testing at only three temperatures, which could result in a substantial reduction of testing time. The results also showed that the FN test was a sensitive test for evaluating rutting susceptibility of asphalt mixtures in the laboratory. The FN test was found to be sensitive to binder stiffness, mixture stiffness, mixture volumetric properties, aggregate gradation, and amount of recycled asphalt pavement (RAP) for the mixtures considered in this study. The study recommends that the catalog of input data for typical asphalt mixtures developed in this study be considered for pavement design in Virginia. The data followed expected trends and compared quite well with those reported in previous studies. Further studies should be conducted to evaluate the FN test as an additional tool for evaluating rutting in asphalt mixtures. Mixtures containing higher amounts of RAP (>20%) exhibited comparatively lower rutting resistance than those with 20% or less RAP. This phenomenon was unexpected since it is generally believed that adding more RAP should result in stiffer and hence more rut-resistant mixtures. Additional research should be conducted to investigate this phenomenon further.

Download or read book Analysis of the Mechanistic empirical Pavement Design Guide Performance Predictions written by Stacey D. Diefenderfer and published by . This book was released on 2010 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures (MEPDG) is an improved methodology for pavement design and the evaluation of paving materials. The Virginia Department of Transportation (VDOT) is expecting to transition to using the MEPDG methodology in the near future. The purpose of this research was to support this implementation effort. A catalog of mixture properties from 11 asphalt mixtures (3 surface mixtures, 4 intermediate mixtures, and 4 base mixtures) was compiled along with the associated asphalt binder properties to provide input values. The predicted fatigue and rutting distresses were used to evaluate the sensitivity of the MEPDG software to differences in the mixture properties and to assess the future needs for implementation of the MEPDG. Two pavement sections were modeled: one on a primary roadway and one on an interstate roadway. The MEPDG was used with the default calibration factors. Pavement distress data were compiled for the interstate and primary route corresponding to the modeled sections and were compared to the MEPDG-predicted distresses. Predicted distress quantities for fatigue cracking and rutting were compared to the calculated distress model predictive errors to determine if there were significant differences between material property input levels. There were differences between all rutting and fatigue predictions using Level 1, 2, and 3 asphalt material inputs, although not statistically significant. Various combinations of Level 3 inputs showed expected trends in rutting predictions when increased binder grades were used, but the differences were not statistically significant when the calibration model error was considered. Pavement condition data indicated that fatigue distress predictions were approximately comparable to the pavement condition data for the interstate pavement structure, but fatigue was over-predicted for the primary route structure. Fatigue model predictive errors were greater than the distress predictions for all predictions. Based on the findings of this study, further refinement or calibration of the predictive models is necessary before the benefits associated with their use can be realized. A local calibration process should be performed to provide calibration and verification of the predictive models so that they may accurately predict the conditions of Virginia roadways. Until then, implementation using Level 3 inputs is recommended. If the models are modified, additional evaluation will be necessary to determine if the other recommendations of this study are impacted. Further studies should be performed using Level 1 and Level 2 input properties of additional asphalt mixtures to validate the trends seen in the Level 3 input predictions and isolate the effects of binder grade changes on the predicted distresses. Further, additional asphalt mixture and binder properties should be collected to populate fully a catalog for VDOT's future implementation use. The implementation of these recommendations and use of the MEPDG are expected to provide VDOT with a more efficient and effective means for pavement design and analysis. The use of optimal pavement designs will provide economic benefits in terms of initial construction and lifetime maintenance costs.

Download or read book Mechanistic empirical Pavement Design Guide written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2008 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Asphalt Materials Characterization in Support of Implementation of the Proposed Mechanistic empirical Pavement Design Guide written by and published by . This book was released on 2007 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed Mechanistic-Empirical Pavement Design Guide (MEPDG) procedure is an improved methodology for pavement design and evaluation of paving materials. Since this new procedure depends heavily on the characterization of the fundamental engineering properties of paving materials, a thorough material characterization of mixes used in Virginia is needed to use the MEPDG to design new and rehabilitated flexible pavements. The primary objective of this project was to perform a full hot-mix asphalt (HMA) characterization in accordance with the procedure established by the proposed MEPDG to support its implementation in Virginia. This objective was achieved by testing a sample of surface, intermediate, and base mixes. The project examined the dynamic modulus, the main HMA material property required by the MEPDG, as well as creep compliance and tensile strength, which are needed to predict thermal cracking. In addition, resilient modulus tests, which are not required by the MEPDG, were also performed on the different mixes to investigate possible correlations between this test and the dynamic modulus. Loose samples for 11 mixes (4 base, 4 intermediate, and 3 surface mixes) were collected from different plants across Virginia. Representative samples underwent testing for maximum theoretical specific gravity, asphalt content using the ignition oven method, and gradation of the reclaimed aggregate. Specimens for the various tests were then prepared using the Superpave gyratory compactor with a target voids in total mix (VTM) of 7% ± 1% (after coring and/or cutting). The investigation confirmed that the dynamic modulus test is an effective test for determining the mechanical behavior of HMA at different temperatures and loading frequencies. The test results showed that the dynamic modulus is sensitive to the mix constituents (aggregate type, asphalt content, percentage of recycled asphalt pavement, etc.) and that even mixes of the same type (SM-9.5A, IM-19.0A, and BM 25.0) had different measured dynamic modulus values because they had different constituents. The level 2 dynamic modulus prediction equation reasonably estimated the measured dynamic modulus; however, it did not capture some of the differences between the mixes captured by the measured data. Unfortunately, the indirect tension strength and creep tests needed for the low-temperature cracking model did not produce very repeatable results; this could be due to the type of extensometers used for the test. Based on the results of the investigation, it is recommended that the Virginia Department of Transportation use level 1 input data to characterize the dynamic modulus of the HMA for projects of significant impact. The dynamic modulus test is easy to perform and gives a full characterization of the asphalt mixture. Level 2 data (based on the default prediction equation) could be used for smaller projects pending further investigation of the revised prediction equation incorporated in the new MEPDG software/guide. In addition, a sensitivity analysis is recommended to quantify the effect of changing the dynamic modulus on the asphalt pavement design. Since low-temperature cracking is not a widespread problem in Virginia, use of level 2 or 3 indirect tensile creep and strength data is recommended at this stage.

Download or read book Asphalt Paving Technology 2011 written by Eugene L. Skok and published by DEStech Publications, Inc. This book was released on 2011-06-28 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanistic empirical Pavement Design Guide written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2008 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Determination of Input Data for Stone Matrix Asphalt and Polymer Modified Dense Graded Mixtures for Use in the Mechanistic Empirical Pavement Design Guide written by Harikrishnan Nair and published by . This book was released on 2021 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: AASHTO’s Mechanistic Empirical Pavement Design Guide (MEPDG) and AASHTOWare Pavement ME Design software (hereinafter “Pavement ME Design”) provide an improved process for conducting pavement analysis and for developing pavement designs based on mechanistic-empirical principles. The Virginia Department of Transportation (VDOT) officially adopted the MEPDG procedure for new construction (new alignment, lane addition, and total reconstruction) for interstate and primary routes effective January 1, 2018. Pavement ME Design requires asphalt mixture volumetrics (asphalt content, air voids, and unit weight) and mechanical properties (dynamic modulus) as Level 1 (i.e., the most accurate) inputs. Currently, VDOT’s dynamic modulus database has limited data on stone matrix asphalt (SMA) and dense-graded polymer modified (designated “SM-E”) mixtures. The purpose of this study was to develop input data for SMA and SM-E mixtures for use in Pavement ME Design. Material properties (dynamic modulus, volumetrics, and in-place density) catalogued from this study will better reflect the rutting characteristics of SM-E mixtures when used in Pavement ME Design. These coefficients are also comparable to those incorporated in the latest version of Pavement ME Design, i.e., Version 2.6 (hereinafter “V2.6 Pavement ME Design”). The study recommends that VDOT’s Materials Division consider using the rutting calibration coefficients developed for SM-E mixtures in this study when V2.6 Pavement ME Design is considered for adoption. However, further calibration/validation will still be needed when V2.6 Pavement ME Design is adopted. Limited field performance data indicated that certain SMA mixtures are susceptible to higher in-service rutting and rutting progression as compared to SM-E mixtures. The study recommends a detailed study to address the rutting concern for certain SMA mixtures.

Download or read book Guide for the Local Calibration of the Mechanistic empirical Pavement Design Guide written by and published by AASHTO. This book was released on 2010 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide provides guidance to calibrate the Mechanistic-Empirical Pavement Design Guide (MEPDG) software to local conditions, policies, and materials. It provides the highway community with a state-of-the-practice tool for the design of new and rehabilitated pavement structures, based on mechanistic-empirical (M-E) principles. The design procedure calculates pavement responses (stresses, strains, and deflections) and uses those responses to compute incremental damage over time. The procedure empirically relates the cumulative damage to observed pavement distresses.

Download or read book Developing an Implementation Strategy for Virginia Department of Transportation Pavement Rehabilitation Design Using Mechanistic Empirical Concepts written by Harikrishnan Nair and published by . This book was released on 2022 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanistic-Empirical Pavement Design Guide (MEPDG) was developed with an objective to provide the highway community with a state-of-the-practice tool for the design of new and rehabilitated pavement structures. The Virginia Department of Transportation (VDOT) officially adopted the MEPDG for new construction for interstate and primary routes effective January 1, 2018. For rehabilitation design, VDOT currently uses an earlier-generation AASHTO guide, the 1993 Guide for Design of Pavement Structures, but expects eventually also to implement the MEPDG for the most common scenarios. To ensure a more effective overlay design, it is imperative to conduct a local calibration/validation of design procedures and to determine the proper material inputs for both the existing and any new pavement materials that may be used in the rehabilitation. The purpose of this study was to assist VDOT in the implementation of AASHTOWare Pavement ME Design software (hereinafter “Pavement ME Design”) for the design of overlays for existing flexible, rigid, and composite pavement. The study evaluated various input levels and the need for separate local calibration factors for rehabilitation of asphalt concrete (AC) over AC, AC over jointed concrete, and AC over continuously reinforced concrete pavements using Version 2.2.6 of Pavement ME Design. The study recommends implementation of the use of the current Version 2.2.6 for rehabilitation design only after a detailed sensitivity analysis with regard to various distresses using current calibration coefficients. Further, the study recommends the promotion of detailed forensic evaluation as part of rehabilitation design for restorative maintenance projects and that VDOT consider adopting V2.6 of Pavement ME Design for new and rehabilitation design.

Download or read book Final Report TRC 0708 PCC Materials Input Values for Mechanistic empirical Pavement Design Guide written by Kevin D. Hall and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Virginia specific Traffic Data Inputs for Use with the Mechanistic empirical Pavement Design Guide written by Bryan C. Smith and published by . This book was released on 2010 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study developed traffic inputs for use with the Guide for the Mechanistic-Empirical Design of New & Rehabilitated Pavement Structures (MEPDG) in Virginia and sought to determine if the predicted distresses showed differences between site-specific and default traffic inputs for flexible and rigid pavements. The axle-load spectra, monthly adjustment factors, vehicle class distribution factors, and number of axles per truck inputs were considered. The predicted distresses based on site-specific traffic inputs from eight interstate and seven primary route weigh-in-motion sites in Virginia were compared to predicted distresses using MEPDG default traffic inputs. These comparisons were performed by use of a normalized difference statistic for each site-specific traffic input and the coefficient of variation for each pavement distress model. In addition, the practical significance for flexible pavements was considered from the difference in the predicted time to failure between site-specific and default traffic inputs. The analysis showed that the effect of the site-specific traffic inputs was generally not statistically significant when the uncertainty of the distress models was considered. However, the site-specific axle-load spectra and vehicle class distribution inputs showed a statistically significant effect on certain predicted distresses for flexible and rigid pavements, respectively. The study recommends that site-specific axle-load spectra data be considered for analysis of flexible pavements. Alternatively, summary (statewide average) axle-load spectra data for analysis of interstate and primary flexible pavements should be considered preferentially over default axle-load spectra. Site-specific vehicle class distribution factors should be considered for analysis of rigid pavements on the interstate system. Alternatively, summary (statewide average) vehicle class distribution factors for analysis of interstate rigid pavements should be considered preferentially over default vehicle class distribution data. Default traffic data are recommended for analysis of primary rigid pavements. This study also recommends that a local calibration process be completed to determine if the predictive models accurately predict the conditions found on Virginia's roadways. If the predictive models are modified, the results may impact the recommendations resulting from this study. The implementation of the recommendations of this study and the use of the MEPDG in general will provide the Virginia Department of Transportation with a more advanced means of designing and analyzing pavements. This should result in optimal designs that are more efficient in terms of initial construction and future maintenance costs.

Download or read book Development of Local Calibration Factors and Design Criteria Values for Mechanistic empirical Pavement Design written by Bryan Smith and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mechanistic-empirical (ME) pavement design procedure allows for analyzing and selecting pavement structures based on predicted distress progression resulting from stresses and strains within the pavement over its design life. The Virginia Department of Transportation (VDOT) has been working toward implementing ME design by characterizing traffic and materials inputs, training with the models and design software, and analyzing current pavement designs in AASHTOware Pavement ME Design software. This study compared the measured performance of asphalt and continuously reinforced concrete pavements (CRCP) from VDOTs Pavement Management System (PMS) records to the predicted performance in AASHTOware Pavement ME Design. Model coefficients in the software were adjusted to match the predicted asphalt pavement permanent deformation, asphalt bottom-up fatigue cracking, and CRCP punchout outputs to the measured values from PMS records. Values for reliability, design life inputs, and distress limits were identified as a starting point for VDOT to consider when using AASHTOware Pavement ME Design through consideration of national guidelines, existing VDOT standards, PMS rating formulas, typical pavement performance at time of overlay, and the data used for local calibration. The model calibration coefficients and design requirement values recommended in this study can be used by VDOT with AASHTOware Pavement ME Design as a starting point to implement the software for design, which should allow for more optimized pavement structures and improve the long-term performance of pavements in Virginia.

Download or read book Determination of Mechanical Properties for Cement Treated Aggregate Base written by M. Shabbir Hossain and published by . This book was released on 2017 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Virginia Department of Transportation (VDOT) currently follows pavement design procedures for all new and rehabilitated pavements based on the 1993 AASHTO Guide for Design of Pavement Structures. VDOT's Materials Division is in the process of implementing the Mechanistic-Empirical Pavement Design Guide (MEPDG) procedure via AASHTOWare Pavement ME Design software. The MEPDG uses mechanical properties of pavement materials for pavement structural design. The mechanistic-empirical design process presents a major change in pavement design from the 1993 AASHTO design guide. It calculates pavement responses through mechanistic analysis based on inputs such as traffic, climate, and materials properties to predict the pavement damage or distress over time for both asphalt and concrete pavements. The purpose of this study was to evaluate the mechanical properties of cement-treated aggregate (CTA) and recommend values for use in AASHTOWare Pavement ME Design software. The field construction of CTA was monitored, and samples were collected for laboratory determination of the compressive strength, modulus of elasticity, and modulus of rupture. Tests with the falling weight deflectometer were conducted to back-calculate the CTA modulus of elasticity, and field cores were collected for testing compressive strength and modulus of elasticity. CTA gained strength with increases in cement content, and the increase in strength and the strength level depended on the aggregate properties, such as the resilient modulus of unbound aggregate. All measured properties were highly variable. VDOT would need to implement a strength-based CTA design to be able to use the required mechanical properties of CTA in the MEPDG system. The study recommends using a target design 7-day compressive strength of 600 to 800 psi. Such strength corresponds well with VDOT's current pavement design practice in accordance with the 1993 AASHTO design guide. CTA mechanical properties were suggested based on this target strength. Most of the default values presented in the MEPDG are considered reasonable. In addition, the values recommended for use in the MEPDG are 1.5 million psi for modulus of elasticity and 200 psi for modulus of rupture.

Download or read book Characterization of Unbound Materials for Mechanistic Empirical Pavement Design Guide MEPDG written by Jeyakaran Thavathurairaja and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Determination of Mechanical Properties for Cement Treated Aggregate written by M. Shabbir Hossain and published by . This book was released on 2017 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Virginia Department of Transportation (VDOT) currently follows pavement design procedures for all new and rehabilitated pavements based on the 1993 AASHTO Guide for Design of Pavement Structures. VDOT's Materials Division is in the process of implementing the Mechanistic-Empirical Pavement Design Guide (MEPDG) procedure via AASHTOWare Pavement ME Design software. The MEPDG uses mechanical properties of pavement materials for pavement structural design. The mechanistic-empirical design process presents a major change in pavement design from the 1993 AASHTO design guide. It calculates pavement responses through mechanistic analysis based on inputs such as traffic, climate, and materials properties to predict the pavement damage or distress over time for both asphalt and concrete pavements. The purpose of this study was to evaluate the mechanical properties of cement-treated aggregate (CTA) and recommend values for use in AASHTOWare Pavement ME Design software. The field construction of CTA was monitored, and samples were collected for laboratory determination of the compressive strength, modulus of elasticity, and modulus of rupture. Tests with the falling weight deflectometer were conducted to back-calculate the CTA modulus of elasticity, and field cores were collected for testing compressive strength and modulus of elasticity. CTA gained strength with increases in cement content, and the increase in strength and the strength level depended on the aggregate properties, such as the resilient modulus of unbound aggregate. All measured properties were highly variable. VDOT would need to implement a strength-based CTA design to be able to use the required mechanical properties of CTA in the MEPDG system. The study recommends using a target design 7-day compressive strength of 600 to 800 psi. Such strength corresponds well with VDOT's current pavement design practice in accordance with the 1993 AASHTO design guide. CTA mechanical properties were suggested based on this target strength. Most of the default values presented in the MEPDG are considered reasonable. In addition, the values recommended for use in the MEPDG are 1.5 million psi for modulus of elasticity and 200 psi for modulus of rupture.

Download or read book Focus written by and published by . This book was released on 2005 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanistic empirical ME Design written by Rongzong Wu and published by . This book was released on 2018 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: