Download or read book Selected Problems in Fluid Flow and Heat Transfer written by Artur J. Jaworski and published by MDPI. This book was released on 2019-09-20 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid flow and heat transfer processes play an important role in many areas of science and engineering, from the planetary scale (e.g., influencing weather and climate) to the microscopic scales of enhancing heat transfer by the use of nanofluids; understood in the broadest possible sense, they also underpin the performance of many energy systems. This topical Special Issue of Energies is dedicated to the recent advances in this very broad field. This book will be of interest to readers not only in the fields of mechanical, aerospace, chemical, process and petroleum, energy, earth, civil ,and flow instrumentation engineering but, equally, biological and medical sciences, as well as physics and mathematics; that is, anywhere that “fluid flow and heat transfer” phenomena may play an important role or be a subject of worthy research pursuits.

Download or read book Lean Combustion written by Derek Dunn-Rankin and published by Academic Press. This book was released on 2016-07-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean Combustion: Technology and Control, Second Edition outlines and explains the latest advances in lean combustion technology and systems. Combustion under sufficiently fuel-lean conditions can have the desirable attributes of high efficiency and low emissions. The book offers readers both the fundamentals and latest developments in how lean burn (broadly defined) can increase fuel economy and decrease emissions, while still achieving desired power output and performance. This volume brings together research and design of lean combustion systems across the technology spectrum in order to explore the state-of-the-art in lean combustion. Readers will learn about advances in the understanding of ultra-lean fuel mixtures and how new types of burners and approaches to managing heat flow can reduce problems often found with lean combustion (such as slow, difficult ignition and frequent flame extinction). This book offers abundant references and examples of real-world applications. New to this edition are significantly revised chapters on IC engines and stability/oscillations, and new case studies and examples. Written by a team of experts, this contributed reference book aims to teach its reader to maximize efficiency and minimize both economic and environmental costs. - Presents a comprehensive collection of lean burn technology across potential applications, allowing readers to compare and contrast similarities and differences - Provides an extensive update on IC engines including compression ignition (diesel), spark ignition, and homogeneous charge compression ignition (HCCI) - Includes an extensive revision to the Stability/Oscillations chapter - Includes use of alternative fuels such as biogas and hydrogen for relevant technologies - Covers new developments in lean combustion using high levels of pre-heat and heat recirculating burners, as well as the active control of lean combustion instabilities

Download or read book Small Scale Energy Systems with Gas Turbines and Heat Pumps written by Satoru Okamoto and published by MDPI. This book was released on 2021-03-29 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: A heat pump system can produce an amount of heat energy that is greater than the amount of energy used to run the heat pump system. Thus, a heat pump system is considered to be a machine system that can use energies efficiently, as is the load leveling air-conditioning system utilizing unutilized energies at high levels. Adaptations of gas turbines for industrial, utility, and marine-propulsion applications have long been accepted as means for generating power with high efficiency and ease of maintenance. Cogeneration with gas turbine is frequently defined as the sequential production of useful thermal energy and shaft power from a single energy source. For applications that generate electricity, the power can either be used internally or supplied to the utility grid. This Special Issue intends to provide an overviews of the existing knowledge related with various aspects of “Small-Scale Energy Systems with Gas Turbines and Heat Pumps”, and contributions on, but not limited to the following subjects were encouraged: wake of stator vane to improve sealing effectiveness; gas turbine cycle with external combustion chamber for prosumer and distributed energy systems; computational simulation of gas turbine engine operating with different blends of biodiesel; experimental methodology and facility for the engine performance and emissions evaluation using jet and biodiesel blends; experimental analysis of an air heat pump for heating service; hybrid fuel cell-Brayton cycle for combined heat and power; design analysis of micro gas turbines in closed cycles. Seven papers were published in the Special Issue out of a total of 12 submitted.

Download or read book Proceedings of the ASME Turbo Expo written by and published by . This book was released on 2007 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emerging Topics in Heat Transfer written by Qiuwang Wang and published by WIT Press. This book was released on 2013-11-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in ten edited chapters this book encompasses important emerging topics in heat transfer equipment, particularly heat exchangers. The chapters have all been selected by invitation only. Advances in high temperature equipment and small scale devices continue to be important as the involved heat transfer and related phenomena are often complex in nature and different mechanisms like heat conduction, convection, turbulence, thermal radiation and phase change as well as chemical reactions may occur simultaneously. The book treats various operating problems, like fouling, and highlights applications in heat exchangers and gas turbine cooling. In engineering design and development, reliable and accurate computational methods are required to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements in knowledge and competence have been achieved during recent years due to improved computational solution methods for non-linear partial differential equations, turbulence modelling advancement and developments of computers and computing algorithms to achieve efficient and rapid simulations. The chapters of the book thoroughly present such advancement in a variety of applications.

Download or read book Advances in Mechanism and Machine Science written by Tadeusz Uhl and published by Springer. This book was released on 2019-06-13 with total page 4203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.

Download or read book Ceramic Matrix Composites written by Walter Krenkel and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering an important material class for modern applications in the aerospace, automotive, energy production and creation sectors, this handbook and reference contains comprehensive data tables and field reports on successfully developed prototypes. The editor and authors are internationally renowned experts from NASA, EADS, DLR, Porsche, MT Aerospace, as well as universities and institutions in the USA, Europe and Japan, and they provide here a comprehensive overview of current R & D with an application-oriented emphasis.

Download or read book Interdisciplinary Applications of Kinematics written by Andrés Kecskeméthy and published by Springer. This book was released on 2014-11-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects a number of important contributions presented during the Second Conference on Interdisciplinary Applications of Kinematics (IAK 2013) held in Lima, Peru. The conference brought together scientists from several research fields, such as computational kinematics, multibody systems, industrial machines, robotics, biomechanics, mechatronics, computational chemistry, and vibration analysis, and embraced all key aspects of kinematics, namely, theoretical methods, modeling, optimization, experimental validation, industrial applications, and design. Kinematics is an exciting area of computational mechanics and plays a central role in a great variety of fields and industrial applications nowadays. Apart from research in pure kinematics, the field deals with problems of practical relevance that need to be solved in an interdisciplinary manner in order for new technologies to develop. The results presented in this book should be of interest for practicing and research engineers as well as Ph.D. students from the fields of mechanical and electrical engineering, computer science, and computer graphics.

Download or read book Servitization and Physical Asset Management written by Michael John Provost and published by SAE International. This book was released on 2018-12-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Servitization and Physical Asset Management, third edition, was developed to provide a structured source of guidance and reference information on the business opportunities linked to servitization and the management of physical assets. A growing trend in the global economy, servitization focuses on the actual deliverables of an asset from the perspective of the customer: electricity instead of the power plant, thrust instead of the engine, mobility instead of a plane or a car. The book offers high-level overviews of how to servitized and manage assets from a variety of perspectives, reviewing nearly 1,500 books, magazine articles, papers and presentations and websites. Written by Michael J. Provost, Ph.D., and a subject matter expert in modeling, simulation, analysis and condition monitoring, Servitization and Physical Asset Management, third edition, is an invaluable reference to those considering providing asset management services for the products they design and manufacture. It is also meant to support middle management wishing to know what needs to be done to look after the assets they are responsible for and who to approach for help, and academics doing research in this field. Michael Provost, is a British engineer with a doctoral degree in thermal power from Cranfield University.

Download or read book Advances in Materials Technology for Fossil Power Plants written by and published by ASM International. This book was released on 2011-01-01 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer XIV written by B. Sundén and published by WIT Press. This book was released on 2016-09-28 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting in Portsmouth in 1988, Heat Transfer XIV: Simulation and Experiments in Heat Transfer and its Applications contains the proceedings of the fourteenth conference in the well-established series on Simulation and Experiments in Heat Transfer and its applications. Heat Transfer might be considered as an established and mature scientific discipline, but it has played a major role in new emerging areas such as sustainable development and reduction of greenhouse gases as well as for micro- and nano- scale structures and bioengineering. Tremendous advances have been achieved during recent years due to improved numerical solution methods for non-linear partial differential equations, turbulence modelling advancements and developments of computers and computing algorithms to achieve efficient and rapid simulations. The papers contained in this book present studies on advanced topics, new approaches and applications of innovative advanced computational methods and experimental measurements to heat and mass transfer problems. Further progress in computational methods requires developments in theoretical and predictive procedures and in applied research. The following list covers some of the topics presented: Energy conversion devices; Heat transfer enhancements; Heat exchanges; Natural and forced convection; Radiation; Multiphase flow heat transfer; Modelling and simulation; Heat recovery; Heat and mass transfer problems; Heat transfer in nature; Renewable energy systems; Biotechnology; Thermal electric devices and High temperature heat transfer.

Download or read book Ceramic Matrix Composites written by Composite Materials Handbook – 17 (CMH-17) and published by SAE International. This book was released on 2017-06-29 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth volume of this six-volume compendium publishes technical guidance and properties on ceramic matrix composite material systems. The selected guidance on technical topics related to this class of composites includes material selection, processing, characterization, testing, data reduction, design, analysis, quality control, application, case histories, and lessons learned of typical ceramic matrix composite materials. Volume 5, which covers ceramic matrix composites, supersedes MIL-HDBK-17-5 of June 17, 2002. The Composite Materials Handbook, referred to by industry groups as CMH-17, is an engineering reference tool that contains over 1,000 records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design and fabricate end items from composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair. The primary purpose of the handbook is to standardize engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials.

Download or read book Proceedings of the 9th IFToMM International Conference on Rotor Dynamics written by Paolo Pennacchi and published by Springer. This book was released on 2015-05-26 with total page 2214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9th IFToMM International Conference on Rotor Dynamics. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, the IFToMM International Conference on Rotor Dynamics has become an irreplaceable point of reference for those working in the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.

Download or read book Numerical Simulation of Heat Exchangers written by W. J. Minkowycz and published by CRC Press. This book was released on 2017-04-07 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with certain aspects of material science, particularly with the release of thermal energy associated with bond breaking. It clearly establishes the connection between heat transfer rates and product quality. The editors then sharply draw the thermal distinctions between the various categories of welding processes, and demonstrate how these distinctions are translated into simulation model uniqueness. The book discusses the incorporation of radiative heat transfer processes into the simulation model.

Download or read book Recent Advances in Mechanical Engineering written by Harish Kumar and published by Springer Nature. This book was released on 2020-01-24 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed papers from the National Conference on Advances in Mechanical Engineering (NCAME 2019), held at the National Institute of Technology Delhi, India. The book covers different areas of mechanical engineering from design engineering to manufacturing engineering. A wide range of topics are discussed such as CAD/CAM, additive manufacturing, fluid dynamics, materials science and engineering, simulation and modeling, finite element analysis, applied mechanics to name a few. The contents provide an overview of the state-of-the-art in mechanical engineering research in the country. Given the scope of the topics covered, the book will be of interest for students, researchers and professionals working in mechanical engineering.

Download or read book Engineering Fluid Dynamics 2018 written by Bjørn H. Hjertager and published by MDPI. This book was released on 2020-01-15 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Engineering Fluid Dynamics 2018”. The topic of engineering fluid dynamics includes both experimental as well as computational studies. Of special interest were submissions from the fields of mechanical, chemical, marine, safety, and energy engineering. We welcomed both original research articles as well as review articles. After one year, 28 papers were submitted and 14 were accepted for publication. The average processing time was 37.91 days. The authors had the following geographical distribution: China (9); Korea (3); Spain (1); and India (1). Papers covered a wide range of topics, including analysis of fans, turbines, fires in tunnels, vortex generators, deep sea mining, as well as pumps.

Download or read book Design and Development of Aerospace Vehicles and Propulsion Systems written by S. Kishore Kumar and published by Springer Nature. This book was released on 2021-03-18 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers presented in the Symposium on Applied Aerodynamics and Design of Aerospace Vehicles (SAROD 2018), which was jointly organized by Aeronautical Development Agency (the nodal agency for the design and development of combat aircraft in India), Gas-Turbine Research Establishment (responsible for design and development of gas turbine engines for military applications), and CSIR-National Aerospace Laboratories (involved in major aerospace programs in the country such as SARAS program, LCA, Space Launch Vehicles, Missiles and UAVs). It brings together experiences of aerodynamicists in India as well as abroad in Aerospace Vehicle Design, Gas Turbine Engines, Missiles and related areas. It is a useful volume for researchers, professionals and students interested in diversified areas of aerospace engineering.