Download or read book Ash Related Problems in Biomass Combustion Plants written by Ingwald Obernberger and published by . This book was released on 2005 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ash from Coal and Biomass Combustion written by Ashok K. Singh and published by Springer Nature. This book was released on 2020-09-12 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise book with comprehensive information on coal and biomass ash generated from their combustion in thermal power plants. It presents detailed studies on ash generated from contrasting coal and biomass feedstocks, and provides a comparative evaluation of these different ashes in terms of their origin, properties, environmental hazards. Potential utilizations with specific advantages and disadvantages of the respective ashes are elaborated in detail, including some innovative means of ash utilization for value addition purposes. By addressing both the theory and commercial exploitation of these products, this book will be helpful for industrialists, academicians and researchers alike.

Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Earthscan. This book was released on 2012-05-16 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems.Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.

Download or read book Ash Related Problems with Biomass Combustion written by Arthur Frank Stam and published by . This book was released on 2020 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Taylor & Francis. This book was released on 2012-05-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems. Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.

Download or read book Solid Biofuels for Energy written by Panagiotis Grammelis and published by Springer Science & Business Media. This book was released on 2010-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels are widely used for electricity generation and heating, creating greenhouse gas emissions and other toxic pollutants, which should be minimised according to the most recent environmental legislation. The utilisation of solid fuels with biogenic origin could contribute to the minimisation of these emissions. Solid Biofuels for Energy presents the current status of the engineering disciplines in this specific area, providing an improved background on the energy exploitation options of solid biomass. Within this framework, all thematic priorities related to the solid bioenergy potential and standardisation, commercialised and emerging energy technologies, and quality of solid residues are presented. Special attention has been given to biomass co-firing with coal, since it has the highest potential for commercial application, while combustion and gasification are more promising for units of medium to small scale. This strong practical focus is evident throughout the book, particularly in discussions of: • international standards for solid biofuel specifications; • supply, cost and sustainability of solid biofuels; • technical issues and non-technical barriers in biomass/coal co-firing; and • biomass combustion and gasification characteristics. Solid Biofuels for Energy is an informative reference, written for researchers and postgraduate students working in the field of biomass. It can also be a useful guide for chemical and mechanical engineers, involved in the environment and energy production sectors.

Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.

Download or read book Biomass combustion science technology and engineering written by H. Widell and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass-fired steam boilers are finding increasing use in industrial-scale applications for both heat and power generation. This chapter compares the main technologies for biomass combustion – spreader stoker, mass burn and biomass bubbling fluidised bed (BFB)/circulating fluidised bed (CFB) – and discusses specific issues to be addressed in the design of biomass-fired steam boiler plants. Examples of recent biomass-to-energy plants are given in order to illustrate how project-specific factors influenced the design. A section is dedicated to non-wood biomass fuels and how their characteristics affect plant design. Conversion of existing coal-fired boilers to biomass firing is also discussed. The final part of the chapter deals with operational issues of biomass-fired plants.

Download or read book Applications of Advanced Technology to Ash Related Problems in Boilers written by L. Baxter and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the behavior of inorganic material in combustion systems. The past decade has seen unprecedented improvements in understanding the rates and mecha nisms of inorganic transformations and in developing analytical tools to predict them. These tools range from improved fuel analysis procedures to predictive computer codes. While this progress has been met with great enthusiasm within the research community, the practices of the industrial community remain largely unchanged. The papers in this book were selected from those presented at an Engineering Foundation Conference of the same title. All have been peer reviewed. The intent of the conference was to illustrate the application of advanced technology to ash-related problems in boilers and, by so doing, engage the research and industrial communities in more productive dialog. Those attending the conference generally felt that we were successful on these counts. We also engaged the industrial community to a greater extent than ever before in the conference discussion and presentation. We hope these proceedings will facilitate a continued and improved interaction between industrial and research communities. Behavior of inorganic material has long been recognized as one of the major considerations affecting the design and operation of boilers that burn ash-producing fuels. The practical problems associated with the behavior are sometimes catastrophic and spec tacular, ranging from major slag falls that damage the bottom of furnaces to complete plugging of convection passes.

Download or read book Fluidized Bed Boilers written by Prabir Basu and published by Elsevier. This book was released on 2013-10-22 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidized Bed Boilers: Design and Application attempts to address the need for a single source of information covering all major areas of fluidized bed boiler design and operation. It is based on the International Workshop on Design and Operation of Atmospheric Pressure Fluidized Bed Boilers, organized by the Center for Energy Studies, Technical University of Nova Scotia in Halifax on 24-45 June 1983. The volume begins by presenting a simplified approach to the design of a fluidized bed boiler and an overview of problems in fluidized-bed combustion (FBC). These are followed by separate chapters on the equations and concepts needed to estimate key hydrodynamic parameters; the key factors and terms to be considered in selecting FBC for specific applications; and principles in the design of air distributors for a fluidized bed boiler. Subsequent chapters discuss heat transfer to surfaces in fluidized beds; the pollution control of fluidized bed combustion of solid fuels; and materials selection in atmospheric fluidized bed combustion systems. The final two chapters are devoted to applications. These include the operational and performance results of TVA’s 20-MW Atmospheric Fluidized Bed Combustion (AFBC) Pilot Plant in Kentucky; and the performance of Canada's first commercial FBC boiler plant, located at CFB Summerside, PEI.

Download or read book Biomass Combustion Science Technology and Engineering written by Lasse Rosendahl and published by Elsevier. This book was released on 2013-04-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilisation of biomass is increasingly important for low- or zero-carbon power generation. Developments in conventional power plant fuel flexibility allow for both direct biomass combustion and co-firing with fossil fuels, while the integration of advanced technologies facilitates conversion of a wide range of biomass feedstocks into more readily combustible fuel. Biomass combustion science, technology and engineering reviews the science and technology of biomass combustion, conversion and utilisation. Part one provides an introduction to biomass supply chains and feedstocks, and outlines the principles of biomass combustion for power generation. Chapters also describe the categorisation and preparation of biomass feedstocks for combustion and gasification. Part two goes on to explore biomass combustion and co-firing, including direct combustion of biomass, biomass co-firing and gasification, fast pyrolysis of biomass for the production of liquids and intermediate pyrolysis technologies. Largescale biomass combustion and biorefineries are then the focus of part three. Following an overview of large-scale biomass combustion plants, key engineering issues and plant operation are discussed, before the book concludes with a chapter looking at the role of biorefineries in increasing the value of the end-products of biomass conversion. With its distinguished editor and international team of expert contributors, Biomass combustion science, technology and engineering provides a clear overview of this important area for all power plant operators, industrial engineers, biomass researchers, process chemists and academics working in this field. Reviews the science and technology of biomass combustion, conversion and utilisation Provides an introduction to biomass supply chains and feedstocks and outlines the principles of biomass combustion for power generation Describes the categorisation and preparation of biomass feedstocks for combustion and gasification

Download or read book Recycling of Biomass Ashes written by Heribert Insam and published by Springer Science & Business Media. This book was released on 2011-07-09 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of renewable bioenergy is increasing, and so is the production of associated wastes: biomass ashes. This book presents eleven chapters on the options for recycling such biomass ashes, ranging from their use as fertilizer in agriculture and forestry to their application as a supplement for the production of cement-based materials or bricks. The book also examines the pros and cons for each of the different uses of biomass ashes.

Download or read book Pollutants Generated by the Combustion of Solid Biomass Fuels written by Jenny M Jones and published by Springer. This book was released on 2014-11-04 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the pollutants formed by the combustion of solid biomass fuels. The availability and potential use of solid biofuels is first discussed because this is the key to the development of biomass as a source of energy. This is followed by details of the methods used for characterisation of biomass and their classification. The various steps in the combustion mechanisms are given together with a compilation of the kinetic data. The chemical mechanisms for the formation of the pollutants: NOx, smoke and unburned hydrocarbons, SOx, Cl compounds, and particulate metal aerosols are given in detail. Combustion kinetics required for the application for design purposes are given. Examples are given of emission levels of a range different types of combustion equipment. Data is given of NOx, particulates and other pollutant arising from combustion of different fuels in fixed bed combustion, fluidized bed combustion and pulverised biomass combustion and co-firing. Modeling methods including computational fluid dynamics for the various pollutants are outlined. The consequential issues arising from the wide scale use of biomass and future trends are then discussed. In particular the role of carbon capture and storage in large biomass combustion plants is considered as well as the opportunity of reducing the concentration of atmospheric concentration of carbon dioxide.

Download or read book Impact of Mineral Impurities in Solid Fuel Combustion written by R. Gupta and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the Engineering Foundation Conference on mineral matter in fuels held on November 2-7, 1997 in Kona, Hawaii. The conference is one of a continuing series that was initiated by the CEGB Mar- wood Engineering Laboratories in 1963. The conference was to be eventually organised by the Engineering Foundation as the need for multi-disciplinary work related to c- trolling ash effects in combustors became apparent. The conference covers both the science and the applications. The papers also present case histories, particularly for current fuel technologies, developments in advanced technologies for power generation and mathematical modelling of these processes. Developments since 1963 have been slow, but steady, due to the complexity of the chemical and physical processes involved. However, the research presented here displays great improvement in our understanding of the mechanisms by which mineral matter will influence fuel use. Steve Benson from EERC presented a review and current status of issues related to ash deposition in coal combustion and gasification. The application of new analytical tools, which have been detailed in the previous conferences, is presented. These include CCSEM, as well as new techniques for char- terising sintering of ash, such as TMA, image analysis, X-ray diffraction crystallography and thermal analysis. The new analytical techniques were extended to encompass widely differing fuels such as biomass. Ole H Larsen from ELSAM Denmark presented a review of these advanced techniques.

Download or read book Thermochemical Processing of Biomass written by Robert C. Brown and published by John Wiley & Sons. This book was released on 2019-05-28 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive examination of the large number of possible pathways for converting biomass into fuels and power through thermochemical processes Bringing together a widely scattered body of information into a single volume, this book provides complete coverage of the many ways that thermochemical processes are used to transform biomass into fuels, chemicals and power. Fully revised and updated, this new edition highlights the substantial progress and recent developments that have been made in this rapidly growing field since publication of the first edition and incorporates up-to-date information in each chapter. Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition incorporates two new chapters covering: condensed phased reactions of thermal deconstruction of biomass and life cycle analysis of thermochemical processing systems. It offers a new introductory chapter that provides a more comprehensive overview of thermochemical technologies. The book also features fresh perspectives from new authors covering such evolving areas as solvent liquefaction and hybrid processing. Other chapters cover combustion, gasification, fast pyrolysis, upgrading of syngas and bio-oil to liquid transportation fuels, and the economics of thermochemically producing fuels and power, and more. Features contributions by a distinguished group of European and American researchers offering a broad and unified description of thermochemical processing options for biomass Combines an overview of the current status of thermochemical biomass conversion as well as engineering aspects to appeal to the broadest audience Edited by one of Biofuels Digest’s "Top 100 People" in bioenergy for six consecutive years Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition will appeal to all academic researchers, process chemists, and engineers working in the field of biomass conversion to fuels and chemicals. It is also an excellent book for graduate and advanced undergraduate students studying biomass, biofuels, renewable resources, and energy and power generation.

Download or read book Biomass combustion science technology and engineering written by L.S. Nikolaisen and published by Elsevier Inc. Chapters. This book was released on 2013-04-04 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter addresses the categorisation of biomass followed by the preparation and conditioning of biomass before combustion and gasification, which are the main technologies for heat and electricity generation. The physical and chemical characteristics are described for a range of types of biomass, together with selected examples of the common European standards for measuring biomass. The chapter addresses the problems and limitations of selected fuels and considers future trends for fuels such as mixed biopellets and the potential use of marine biomass.

Download or read book Fuel Flexible Energy Generation written by John Oakey and published by Woodhead Publishing. This book was released on 2015-12-08 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Flexible Energy Generation: Solid, Liquid and Gaseous Fuels provides updated information on flexible fuel energy generation, the process by which one or more fuels can be combusted in the same boiler or turbine to generate power. By adapting or building boilers and turbines to accept multiple fuel sources, they can be co-fired with biomass and waste derived fuels, allowing a reduction in carbon output, thus providing cleaner energy. Fuel flexibility is becoming more important in a world of diminishing fossil fuel stocks. Many countries are investing in the development of more efficient fuel flexible boilers and turbines, and their use is becoming more prevalent in industry as well. This book provides comprehensive coverage of flexible fuel energy generation across all potential fuel types, and was written by a selection of experts in the field who discuss the types of fuels which can be used in fuel flexible energy generation, from solid fuels to biomass fuels, the preparation of fuels to be used in fuel flexible operations, that includes their handling and transport, and combustion and conversion technologies with chapters ranging from large-scale coal gasification to technology options and plant design issues. Focuses on fuel flexibility across all potential fuel types Includes thorough treatment of the technology being developed to allow for fuel flexibility Written by leading experts in the field Provides an essential text for R&D managers in firms which produce boilers or turbines, those who work in the fuel industry, and academics working in engineering departments on energy generation