Download or read book Army Techniques Publication ATP 3 13 3 Army Operations Security for Division and Below July 2019 written by United States Government Us Army and published by . This book was released on 2019-08-27 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual, Army Techniques Publication ATP 3-13.3 Army Operations Security for Division and Below July 2019, is to provide a doctrinal operations security reference for Army tactical unit commanders, operations security planners, staffs, and unit trainers at division and below. The Army operations security process is a systematic method used to identify, control, and protect essential elements of friendly information. An essential element of friendly information is a critical aspect of a friendly operation that, if known by the enemy, would subsequently compromise, lead to failure, or limit success of the operation and therefore should be protected from enemy detection. Traditional security programs protect classified information, but are not necessarily designed to protect essential elements of friendly information. Properly implemented operations security works in coordination with traditional security programs to protect essential elements of friendly information. The Army Protection Program, a management framework to synchronize, prioritize, and coordinate protection policies and resources, highlights operations security as an additional protection task that commanders and staffs must synchronize and integrate, along with other capabilities and resources, to preserve combat power. Commanders designate a member of the staff to serve as the unit's operations security planner. The operations security planner-typically a standing member of the unit's protection working group that brings together representatives of all staff elements concerned with protection- ensures that operations security is considered during the military decisionmaking process and incorporated within the unit's scheme of protection. The operations security planner analyzes unit's information activities, operational patterns and routines, signatures, and other activities that reveal unit-specific operational information and other associated observables. The operations security planner assesses whether such information or indicators could reasonably be observed by enemy or adversary forces known or suspected of conducting surveillance, reconnaissance, or intelligence collection activities directed against the unit. After identifying potentially vulnerable essential elements of friendly information, the operations security planner recommends them to the commander, along with a variety of measures to prevent their compromise. Commanders direct measures and countermeasures to reduce enemy observation and exploitation of friendly actions. These measures include concentrating forces and hiding friendly movements and rehearsals. Additionally, Army divisions and echelons below employ countermeasures such as camouflage, concealment, and decoys as an integral part of unit standard operating procedures. ATP 3-13.3 contains four chapters and one appendix. A brief description of each follows: Chapter 1 discusses the fundamentals of operations security, provides a list of operations security-related terms, and describes commander and operations security planner responsibilities. Chapter 2 describes the operations security process in detail, discusses how the process should be incorporated into operations and planning, identifies each step of the process, suggests several items to consider for operations security guidance, and provides an example of an operations security estimate. Chapter 3 examines an operations security planner's role in each step of the military decisionmaking process. Chapter 4 looks at the tools available to monitor, evaluate, and refine unit measures and countermeasures. Appendix A offers tips and recommendations for developing the operations security appendix of an operational order and provides an example of a completed operations security appendix.

Download or read book Army Techniques Publication ATP 3 12 3 Electronic Warfare Techniques July 2019 written by United States Government Us Army and published by . This book was released on 2019-08-27 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Army Techniques Publication ATP 3-12.3 Electronic Warfare Techniques July 2019, provides doctrinal guidance and direction to the Army for conducting electronic warfare during unified land operations. This publication provides a description of electronic warfare, roles, relationships, responsibilities, and capabilities to support Army and joint operations. ATP 3-12.3 nests with and supports joint electronic warfare doctrine and provides details on techniques and procedures for Army electronic warfare. This publication includes the fundamentals and guiding principles for electronic warfare. It provides a cohesive and coherent description of how electronic warfare supports and enables operations as well as other mission tasks and functions at each echelon. Electronic warfare integrates into operations using already established joint and Army processes such as the intelligence process, targeting and the military decision-making process. This publication includes electronic warfare staff responsibilities, contributions to the military decision-making process and targeting, and the reliance on intelligence preparation of the battlefield. It describes doctrinal techniques to address future operational challenges with current electronic warfare capabilities. Due to rapidly evolving electronic warfare capabilities and techniques, the Cyber COE will review and update ATP 3-12.3 on a frequent basis in order to keep pace with the continuously evolving electromagnetic operational environment. This publication describes electronic warfare missions and actions within the electromagnetic spectrum and the interrelation of these activities among each other and all Army operations.

Download or read book Army Techniques Publication Atp 3 55 4 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2016-10-06 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATP 3-55.4 Techniques for Information Collection During Operations Among Populations APRIL 2016 This publication provides time-tested, coherent, and easily understood techniques for Soldiers and Department of the Army (DA) Civilians who collect information while interacting with the public during the conduct of their duties. Many of the techniques described are designed specifically for patrols, checkpoints, roadblocks, cordon and searches, and other missions in which Soldiers interact with the populace. This manual is a compilation of techniques to help all Soldiers collect information while interacting with the population through voluntary questioning, detainee handling, tactical questioning, and document and equipment handling. Introduces the basics of interacting with the population and describes the reporting procedures while providing some tools for patrols and intelligence staffs (S-2s). Provides the doctrinal framework for Soldiers and leaders at all echelons and forms the foundation for soldier sensor mission curricula within the Army Education System. Its audience is broad, from Soldiers and leaders to civilians. This manual supersedes FM 2-91.6, dated 10 October 2007.

Download or read book Army Techniques Publication ATP 3 20 15 MCRP 3 10B 1 Tank Platoon July 2019 written by United States Government Us Army and published by . This book was released on 2019-07-13 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Army Techniques Publication ATP 3-20.15 MCRP 3-10B.1 Tank Platoon July 2019, encompasses techniques for tank platoons of armored brigade combat teams (ABCTs). It replaces ATP 3-20.15, published in December 2012. ATP 3-20.15/MCRP 3-10B.1 provides doctrinal guidance; describes relationships in the platoon; defines organizational roles and functions, capabilities, limitations; and lay outs the responsibilities for platoons during unified land operations. The tank platoon is a unified team; all tanks crews work together to achieve mission success. A single tank can be vulnerable in the face of diverse battlefield hazards, such as enemy forces or unfavorable terrain and situations. These vulnerabilities are significantly reduced when tanks are employed as platoons. The tank platoon requires bold, aggressive, resourceful, and adaptive leaders-leaders of character, competence and commitment-who are willing to accept prudent risks to accomplish the mission. This publication addresses the significant changes in Army doctrinal terminology, constructs and proven tactics, techniques, and procedures.

Download or read book Army Techniques Publication 3 34 81 Mcwp 3 17 4 Engineer Reconnaissance March 2016 written by Us Army, United States Government and published by Createspace Independent Publishing Platform. This book was released on 2016-11-14 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATP 3-34.81 provides techniques for the performance of tactical and technical engineer reconnaissance in support of military activities that are conducted across the full range of military operations. This publication supports doctrine found in ADP 3-0, FM 3-34, ADRP 5-0, and ADRP 6-0. Although primarily oriented on the brigade combat team (BCT)/regimental combat team (RCT) based Marine air-ground task force (MAGTF) and below, the principal audience for ATP 3-34.81 is all members of the profession of arms. Commanders and staffs of Army and Marine Corps headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army and Marine Corps will also use this publication. The three engineer disciplines are combat (with the capabilities and activities of mobility, countermobility, and survivability [M/CM/S]), general, and geospatial engineering. These disciplines include significant reconnaissance capabilities. The three engineer disciplines include extensive discussion on integrating the planning for, and conduct of, engineer reconnaissance support within the tactical operations of the combined arms team. This publication discusses the capability resident within combat engineer units to form and employ engineer reconnaissance teams (ERTs). It also describes the capability resident within general engineer elements to form and employ ERTs, augment combat engineer ERTs, or provide assessment and survey teams. Finally, geospatial engineering enables reconnaissance and may play a large role, especially during the planning process. Engineer reconnaissance, like chemical, biological, radiological, and nuclear (CBRN) and other technical applications, is not a form of reconnaissance. Engineer reconnaissance is a focused application of special or unique capabilities supporting reconnaissance, and it is applicable to all forms of reconnaissance. The engineer disciplines provide reconnaissance capabilities that vary in linkages to warfighting functions, degrees of technical expertise, and effort applied to the assigned mission and tasks. Engineer reconnaissance is directly linked to geospatial intelligence because combat and general engineer units use technical measuring or survey devices to confirm, correct, or update the accuracy of available geospatial information. After analysis and comparison against other intelligence collections, this updated geospatial information becomes intelligence, which feeds the commander's decisionmaking process. Finally, this publication is written with the acknowledgement that the operational environment is more variable now. Engineers must be prepared to go into any operational environment and perform a full range of reconnaissance tasks in support of the maneuver commander while dealing with a wide range of threats and other influences. It builds on the collective knowledge and experience gained through nearly a dozen years of sustained military operations and exercises. It is rooted in time-tested principles and fundamentals, while accommodating new technologies and diverse threats to national security. This publication consists of five chapters and six appendixes that discuss the integration of engineer reconnaissance within the operational planning, execution, and assessment process that is presented in ADRP 5-0, ADRP 6-0, and MCWP 5-1.

Download or read book Army Regulation AR 530 1 Operations Security September 2014 written by Us Army, United States Government and published by CreateSpace. This book was released on 2014-10-13 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication, Army Regulation AR 530-1 Operations Security September 2014, fully implements National Security Decision Directive 298, Chairman, Joint Chiefs of Staff Instruction 3213.01D, Joint Publication 3–13.3, and Department of Defense directive 5205.02E and Department of Defense 5205.02–M. This regulation states Army policy on operations security program development, revises terminology, provides details on the operations security planning process, and outlines the operations security review, assessment and survey requirements. The Army operations security program authority is consistent with Joint policy and doctrine in Chairman, Joint Chiefs of Staff Instruction 3213.01D and Joint Publication 3–13.3. In Joint and Army operations, operations security is an information-related capability integrated by Information Operations as prescribed in Joint Publication 3–13.

Download or read book Scout Platoon Atp 3 20 98 written by Department of Department of the Army and published by . This book was released on 2020-02-13 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: SCOUT PLATOON ATP 3-20.98 December 2019 ATP 3-20.98 provides framework and tactical employment principles and techniques for scout platoons of the Cavalry troops in the Armored brigade combat team; the Infantry brigade combat team, mounted and dismounted; the Stryker brigade combat team. ATP 3-20.98 also applies to the scout platoons of the combined arms battalion, the Infantry battalion, and the Stryker Infantry battalion. The principal audiences for ATP 3-20.98 are platoon leaders, platoon sergeants, section sergeants, and squad leaders. It also applies to Cavalry troop and squadron commanders and staff and maneuver battalion commanders and staff responsible for the planning, execution, or support of reconnaissance and security operations as well as instructors charged with teaching reconnaissance and security operations. Commanders, staffs, and subordinates ensure that their decisions and actions comply with applicable U.S., international, and in some cases host-nation laws and regulations. Commanders at all levels ensure that their Soldiers operate in accordance with the law of war and the rules of engagement. (See FM 6-27.) ATP 3-20.98 uses joint terms where applicable. Selected joint and Army terms and definitions appear in both the glossary and the text. For definitions shown in the text, the term is italicized and the number of the proponent publication follows the definition. This publication is not the proponent for any Army terms. ATP 3-20.98 applies to the Active Army, the Army National Guard/Army National Guard of the United States and the United States Army Reserve unless otherwise stated. The proponent agency is the United States Army Training and Doctrine Command. The preparing agency is the United States Army Maneuver Center of Excellence. Send comments and recommendations on DA Form 2028, (Recommended Changes to Publications and Blank Forms) to Commander, Maneuver Center of Excellence, Directorate of Training and Doctrine, Doctrine and Collective Training Division, ATTN: ATZK-TDD, 1 Karker Street, Fort Benning, GA 31905-5410; by email to [email protected]; or submit an electronic DA Form 2028. Disclaimer: "The use or appearance of United States Department of Army publications on a non-Federal Government website does not imply or constitute Department of Army endorsement of the distribution service."

Download or read book Army Techniques Publication ATP 3 90 5 Combined Arms Battalion July 2021 written by United States Government US Army and published by . This book was released on 2021-07-17 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This United States Army Maneuver Center of Excellence manual, Army Techniques Publication ATP 3-90.5 Combined Arms Battalion July 2021, describes the techniques and procedures to tactically employ the combined arms battalion (CAB), the primary maneuver force of the Armored brigade combat team (ABCT) in unified land operations. This publication provides techniques and procedures appropriate for the CAB to effectively exercise the warfighting functions of command and control, movement and maneuver, intelligence, fires, sustainment, and protection, in the conduct of sustained combined arms and close combat operations. The techniques and procedures described herein are intended as a guide and are to be viewed as flexible in application, depending on the factors of mission, enemy, terrain and weather, troops and support available, time available, and civil considerations. Each situation in combat must be resolved by adaptable leaders who exercise initiative to intelligently interpret and apply the doctrine set forth herein. The principal audience for ATP 3-90.5 is the commander and staff of the CAB and its subordinate units. This publication emphasizes CAB operations with related information at the Armor and mechanized Infantry company team level. Greater details and techniques on Armor and mechanized Infantry company team operations can be found in ATP 3-90.1.

Download or read book Army Support to Military Deception FM 3 13 4 written by Headquarters Department of the Army and published by . This book was released on 2019-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This field manual aims to provide techniques to assist planners in planning, coordinating, executing, synchronizing, and assessing military deception (MILDEC). While the means and techniques may evolve over generations, the principles and fundamentals of deception planning remain constant. FM 3-13.4 applies to all members of the Army profession: leaders, Soldiers, Army Civilians, and contractors. The principal audience for this publication is Army commanders, staffs, and all leaders. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should refer to applicable joint or multinational doctrine concerning joint or multinational planning. Trainers and educators throughout the Army also use this publication as a guide for teaching MILDEC. Commanders, staffs, and subordinates ensure their decisions and actions comply with applicable U.S., international, and, in some cases, host-nation laws and regulations.

Download or read book Handbook for Tactical Operations in the Information Environment written by Michael Schwille and published by . This book was released on 2021-10-04 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its quick-reference format and series of illustrative vignettes, this handbook facilitates problem-solving and highlights how early-career officers in tactical units can contribute to operations in the information environment.

Download or read book Field Manual FM 3 98 Reconnaissance and Security Operations July 2015 written by United States Army and published by CreateSpace. This book was released on 2015-08-08 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication, Field Manual FM 3-98 Reconnaissance and Security Operations July 2015, provides doctrinal guidance and direction for Cavalry organizations, as well as reconnaissance and security organizations. This FM establishes the foundation for the development of tactics and procedures in subordinate doctrine publications. This publication applies across the range of military operations. While the main focus of this field manual is Cavalry formations within the units listed below, all maneuver formations must be able to conduct reconnaissance and security tasks. - Armored brigade combat team (ABCT) Cavalry squadron. - Infantry brigade combat team (IBCT) Cavalry squadron. - Stryker brigade combat team (SBCT) Cavalry squadron. - Battlefield surveillance brigade (BFSB) Cavalry squadron. - It is applicable to the- - Scout platoon of maneuver battalions. - Combat aviation brigade air squadron. The principal audiences for FM 3-98 are commanders, leaders, and staffs responsible for the planning, execution, or support of reconnaissance and security operations as well as instructors charged with teaching reconnaissance and security operations. Doctrine consists of fundamental principles that describe how to fight. At the tactical level, doctrine consists of authoritative principles concerning how to execute reconnaissance and security operations as part of Army and joint operations that require professional military judgment in their application. Importantly, our doctrine must describe how brigade combat teams (BCT) and subordinate units combine the capabilities of various arms into cohesive, combined arms, air-ground teams and provide a clear description of how to execute reconnaissance and security operations. This publication provides the commander and staff of Cavalry formations with doctrine relevant to Army and joint operations. This publication explains how effective reconnaissance and security operations generate depth, allow commanders reaction time and maneuver space, fight for information and collect information through stealth, protect against surprise, ease the forward movement of follow-on forces, and provide commanders with flexibility and adaptability. The doctrine described in this publication is applicable across unified land operations. The previous proponent manual for Cavalry Operations was FM 3-20.96, published 12 March 2010, which included operational considerations. This publication provides doctrinal guidance for all formations assigned to the ABCT, the IBCT, and SBCT. The following is a summary of each chapter in the manual: Chapter 1 addresses the role of Cavalry in unified land operations and Cavalry organizations. Chapter 2 discusses understanding the threat, potential threat groups and threat characteristics. Chapter 3 addresses the operational environment, shaping, engaging, and influencing outcomes, and consolidating gains. Chapter 4 highlights the updated concepts of mission command in relation to commander's reconnaissance and security guidance, the operations process and information collection. Chapter 5 begins with an overview, followed by a detailed discussion of the fundamentals of reconnaissance, forms of reconnaissance, and reconnaissance handover. Chapter 6 begins with an overview, followed with the fundamentals of security operations, counterreconnaissance, and the forms of security. Chapter 7 provides a short overview and then devotes a section to reconnaissance and security stability planning, stability principles and frameworks, and stability tasks. Chapter 8 describes sustainment for reconnaissance and security tasks, sustainment planning considerations for reconnaissance and security, sustainment considerations for reconnaissance and security and special sustainment consideration.

Download or read book Army Techniques Publication ATP 6 02 40 Techniques for Visual Information Operations January 2019 written by United States Government Us Army and published by . This book was released on 2019-01-12 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Army Techniques Publication ATP 6-02.40 Techniques for Visual Information Operations January 2019, is the primary doctrine publication for visual information operations to support the Army's mission. ATP 6-02.40 provides techniques associated with the components of visual information operations and establishes non-prescriptive ways or methods combat camera Soldiers perform missions, functions, and tasks associated with visual information. The principal audience for ATP 6-02.40 is combat camera Soldiers, commanders, staff, supervisors, planners, and other personnel involved in providing combat camera and visual information support to strategic, operational, and tactical mission objectives. ATP 6-02.40 applies to the Active Army, Army National Guard/Army National Guard of the United States, and United States Army Reserve unless otherwise stated.ATP 6-02.40 expands on the visual information foundations and tenets established in FM 6-02, Signal Support to Operations. Information in ATP 6-02.40 includes roles and responsibilities that enable and support the Army's mission at all echelons. ATP 6-02.40 outlines the Defense Media Activity and its operating components. ATP 6-02.40 has six chapters: Chapter 1 provides an overview of visual information operations. Chapter 1 discusses the visual information mission, support, and outlines imagery life-cycle management. Chapter 2 introduces visual information documentation. Chapter 2 defines and addresses visual information documentation including combat camera, operational documentation, technical documentation, and supplemental visual information roles. Chapter 3 provides an overview of combat camera operations, the associated roles, responsibilities, as well as the organizational structure of the combat camera company. Chapter 3 discusses combat camera support to Army and joint operations. Chapter 4 provides a description of the various visual information documentation methods and products used to document events and activities. Chapter 5 outlines the military occupational specialty training and the specialized training associated with visual information operations personnel. Chapter 6 addresses life-cycle sustainment for visual information equipment and systems, equipment planning, and maintenance.

Download or read book Reconnaissance and Security Operations FM 3 98 written by Headquarters Department of the Army and published by . This book was released on 2019-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual FM 3-98 Reconnaissance and Security Operations, provides doctrinal guidance and direction for Cavalry organizations, as well as reconnaissance and security organizations. This FM establishes the foundation for the development of tactics and procedures in subordinate doctrine publications. This publication applies across the range of military operations. While the main focus of this field manual is Cavalry formations within the units listed below, all maneuver formations must be able to conduct reconnaissance and security tasks. - Armored brigade combat team (ABCT) Cavalry squadron. - Infantry brigade combat team (IBCT) Cavalry squadron. - Stryker brigade combat team (SBCT) Cavalry squadron. - Battlefield surveillance brigade (BFSB) Cavalry squadron. - It is applicable to the- - Scout platoon of maneuver battalions. - Combat aviation brigade air squadron.

Download or read book Army Techniques Publication Atp 3 36 FM 3 36 Electronic Warfare Techniques December 2014 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2015-06-15 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Techniques Publication ATP 3-36 (FM 3-36) Electronic Warfare Techniques December 2014 provides techniques for the application of electronic warfare in unified land operations. ATP 3-36 expands the discussion of the role of electronic warfare in cyber electromagnetic activities started in FM 3-38. The principal audience for ATP 3-36 is all members of the profession of arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this publication. ATP 3-36 expands upon electronic warfare tasks, their role in unified land operations, and considerations specific to electronic warfare. It contains five chapters and three appendixes. Chapter 1 provides a brief description of the three divisions of electronic warfare, describes the key personnel involved in planning and coordinating electronic warfare, explains its relationship to cyber electromagnetic activities, and concludes with electronic warfare contributions to the integrating processes and continuing activities. Chapter 2 discusses the operations process and applying electronic warfare considerations. It provides guidance on preparing the electronic warfare running estimate. Chapter 3 addresses electronic warfare preparation, execution, and assessment. More detailed information is provided on the joint restricted frequency list, airborne electronic attack, and electromagnetic interference considerations. Chapter 4 looks at coordinating electronic warfare through the targeting process. Chapter 5 introduces joint and multinational electronic warfare staff structures and organizations, as well as, unique information security considerations when working with multinational organizations. Appendix A discusses electronic warfare forms and message formats. Appendix B provides information on calculating jammer effectiveness. Appendix C describes electronic warfare equipment used by each of the Services.

Download or read book Army Techniques and Procedures ATP 3 20 98 Reconnaissance Platoon April 2013 written by United States Government Army and published by Createspace Independent Pub. This book was released on 2013-04-17 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Techniques and Procedures (ATP) 3-20.98 provides the techniques for employment of reconnaissance platoons of the reconnaissance squadrons in the Armored brigade combat team (ABCT), Infantry brigade combat team (IBCT), Stryker brigade combat team (SBCT), and battlefield surveillance brigade (BFSB). This manual also applies to the reconnaissance platoons of the combined arms battalion (CAB), Stryker Infantry battalion, and the Infantry battalion of the IBCT, and provides techniques for the employment of the reconnaissance platoons throughout the range of military operations. This ATP provides doctrinal guidance for commanders, staff, and leaders who are responsible for planning, preparing, executing, and assessing operations of the reconnaissance platoons. It also serves as an authoritative reference for personnel developing materiel and force structure, institutional and unit training, and standard operating procedures (SOPs) for reconnaissance platoon organizations. These doctrinal techniques are to be used as a guide and are not to be considered prescriptive. This manual outlines the framework in which the five types of reconnaissance platoons operate: by themselves, or as part of the troop or combined arms organization. It also includes discussions of doctrine that apply to each specific type of platoon. This ATP is directed toward the reconnaissance platoon leader, platoon sergeant, section sergeant, team leaders, subordinate leaders, and all supporting units. This ATP applies to the Active Army, the United States Army National Guard/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. The proponent for this publication is the U.S. Army Training and Doctrine Command (TRADOC). The preparing agency is the U.S. Army Maneuver Center of Excellence (MCoE).

Download or read book Physical Security written by U.S. Department Of The Army and published by . This book was released on 2010-08 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Tactics, Techniques, and Procedures (ATTP) 3-39.32 provides doctrinal guidance for personnel who are responsible for planning and executing physical security programs. It is the basic reference for training security personnel and is intended to be used in conjunction with the Army Regulation (AR) 190 series (Military Police), Security Engineering Unified Facilities Criteria (UFC) publications, Department of Defense (DOD) directives, and other Department of the Army (DA) publications. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserves (USAR) unless otherwise stated. Prevention and protection are the two primary concerns of physical security; both serve the security interests of people, equipment, and property. This ATTP establishes physical security as a supporting component of the protection warfighting function and describes defensive measures that enable protection tasks, such asoperations security, antiterrorism, operational area security, survivability, and information protection.

Download or read book Army Techniques Publication Atp 3 01 50 Air Defense and Airspace Management Adam Cell Operations April 2013 written by United States Government Army and published by Createspace Independent Pub. This book was released on 2013-04-16 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATP 3-01.50 provides basic tactics, techniques, and procedures (TTPs) for the tactical employment of the ADAM cell in the Stryker Brigade Combat Team (SBCT) and the support brigades, an overview of the differences in operation of the ADAM/BAE assigned to an HBCT and IBCT as one unified element, and the AMD cell at higher echelon units.ATP 3-01.50 applies to Army headquarters from brigade through corps. It applies to all Army leaders, especially trainers, educators, force designers, and doctrine developers. Army headquarters serving as a headquarters for a joint force land component or joint task force should refer to appropriate joint doctrine, policies, and regulations.ATP 3-01.50 has an introduction and four chapters. It augments, but does not replace, the planning doctrine in ADP 5-0 and the MISSION COMMAND (MC) doctrine in FM 6-0. It expands MC doctrine regarding decision making, assessment, and exercise of MC during execution.• The Introduction details the role of doctrine. It also expands upon the manual's purpose and summarizes the doctrinal changes it contains.• Chapter 1 provides an overview of the ADAM cell and details its missions and roles in the protection cell, airspace command and control, and airspace management. It also describes the ADAM cell equipment.• Chapter 2 details the different echelons at which the ADAM cell will be used. It expands the operations process and discusses how several processes integrate during the planning, preparing, executing, and assessment activities of an operation. It reinforces the commander's role in exercising MC and the staff's role in supporting the commander and subordinate commanders.• Chapter 3 details command and control, war fighting functions, military decision making, and communications. It explains the various processes involved during the integration of planning, preparing, executing, and assessing activities of an operation. This chapter also reinforces the commander's role in exercising MC and the staff's role in supporting the commander and subordinate commanders. Communications requirements for effective employment of the ADAM cell are also described.• Chapter 4 broadens the doctrine for exercising MC during execution established in FM 6-0. It details the rapid decision making and synchronization process. Also discussed are the Army Battle Command System (ABCS) roles and recommended procedures with the ADAM cell, the common operational picture (COP) recommended procedures and operational process, and specific ADAM cell staff tasks.• Appendix A describes initialization as it pertains to the user initializing each system safely. It is a composite of checklists used for deployment preparation, powering up the ABCS, establishing digital communications, and creating and distributing ABCS databases.• Appendix B details the ADAM cell capabilities and operational functions. It also describes AMD and aviation augmentation, with a list and general description of AMD and aviation assets which the maneuver commander may task for operations.• Appendix C explains the importance of liaison and identifies the key staff sections that the ADAM crew must interface with to accomplish its tactical mission.