Download or read book Arithmetic Built in Self test for Embedded Systems written by Janusz Rajski and published by Prentice Hall. This book was released on 1998 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arithmetic Built-In Self-Test for Embedded Systems offers a thorough treatment of the important issues in software-based built-in self-test for systems with embedded processors. Fundamental concepts are illustrated with practical scenarios for test generation, test application, and test response compaction. Arithmetic Built-In Self-Test for Embedded Systems uses an approach to cutting-edge technology that will be of interest to hardware and embedded system designers, test and design engineers, and researchers working on IC/core testing. It is also appropriate for graduate-level design courses. An introductory chapter provides a comprehensive tutorial covering the most relevant DFT and BIST techniques.
Download or read book Embedded Processor Based Self Test written by Dimitris Gizopoulos and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Processor-Based Self-Test is a guide to self-testing strategies for embedded processors. Embedded processors are regularly used today in most System-on-Chips (SoCs). Testing of microprocessors and embedded processors has always been a challenge because most traditional testing techniques fail when applied to them. This is due to the complex sequential structure of processor architectures, which consists of high performance datapath units and sophisticated control logic for performance optimization. Structured Design-for-Testability (DfT) and hardware-based self-testing techniques, which usually have a non-trivial impact on a circuit’s performance, size and power, can not be applied without serious consideration and careful incorporation into the processor design. Embedded Processor-Based Self-Test shows how the powerful embedded functionality that processors offer can be utilized as a self-testing resource. Through a discussion of different strategies the book emphasizes on the emerging area of Software-Based Self-Testing (SBST). SBST is based on the idea of execution of embedded software programs to perform self-testing of the processor itself and its surrounding blocks in the SoC. SBST is a low-cost strategy in terms of overhead (area, speed, power), development effort and test application cost, as it is applied using low-cost, low-speed test equipment. Embedded Processor-Based Self-Test can be used by designers, DfT engineers, test practitioners, researchers and students working on digital testing, and in particular processor and SoC test. This book sets the framework for comparisons among different SBST methodologies by discussing key requirements. It presents successful applications of SBST to a number of embedded processors of different complexities and instruction set architectures.
Download or read book Embedded Processor Based Self Test written by Dimitris Gizopoulos and published by Springer Science & Business Media. This book was released on 2004-12-20 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Processor-Based Self-Test is a guide to self-testing strategies for embedded processors. Embedded processors are regularly used today in most System-on-Chips (SoCs). Testing of microprocessors and embedded processors has always been a challenge because most traditional testing techniques fail when applied to them. This is due to the complex sequential structure of processor architectures, which consists of high performance datapath units and sophisticated control logic for performance optimization. Structured Design-for-Testability (DfT) and hardware-based self-testing techniques, which usually have a non-trivial impact on a circuit’s performance, size and power, can not be applied without serious consideration and careful incorporation into the processor design. Embedded Processor-Based Self-Test shows how the powerful embedded functionality that processors offer can be utilized as a self-testing resource. Through a discussion of different strategies the book emphasizes on the emerging area of Software-Based Self-Testing (SBST). SBST is based on the idea of execution of embedded software programs to perform self-testing of the processor itself and its surrounding blocks in the SoC. SBST is a low-cost strategy in terms of overhead (area, speed, power), development effort and test application cost, as it is applied using low-cost, low-speed test equipment. Embedded Processor-Based Self-Test can be used by designers, DfT engineers, test practitioners, researchers and students working on digital testing, and in particular processor and SoC test. This book sets the framework for comparisons among different SBST methodologies by discussing key requirements. It presents successful applications of SBST to a number of embedded processors of different complexities and instruction set architectures.
Download or read book A Designer s Guide to Built In Self Test written by Charles E. Stroud and published by Springer Science & Business Media. This book was released on 2005-12-27 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: A recent technological advance is the art of designing circuits to test themselves, referred to as a Built-In Self-Test. This book is written from a designer's perspective and describes the major BIST approaches that have been proposed and implemented, along with their advantages and limitations.
Download or read book Principles of Testing Electronic Systems written by Samiha Mourad and published by John Wiley & Sons. This book was released on 2000-07-25 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: A pragmatic approach to testing electronic systems As we move ahead in the electronic age, rapid changes in technology pose an ever-increasing number of challenges in testing electronic products. Many practicing engineers are involved in this arena, but few have a chance to study the field in a systematic way-learning takes place on the job. By covering the fundamental disciplines in detail, Principles of Testing Electronic Systems provides design engineers with the much-needed knowledge base. Divided into five major parts, this highly useful reference relates design and tests to the development of reliable electronic products; shows the main vehicles for design verification; examines designs that facilitate testing; and investigates how testing is applied to random logic, memories, FPGAs, and microprocessors. Finally, the last part offers coverage of advanced test solutions for today's very deep submicron designs. The authors take a phenomenological approach to the subject matter while providing readers with plenty of opportunities to explore the foundation in detail. Special features include: * An explanation of where a test belongs in the design flow * Detailed discussion of scan-path and ordering of scan-chains * BIST solutions for embedded logic and memory blocks * Test methodologies for FPGAs * A chapter on testing system on a chip * Numerous references
Download or read book Design of Hardware Software Embedded Systems written by Eugenio Villar Bonet and published by Ed. Universidad de Cantabria. This book was released on 2001 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Este libro presenta los desafíos planteados por las nuevas y sumamente poderosas tecnologías de integración de sistemas electrónicos, que están en la base de los cambios sociales hacia lo que llaman la Sociedad de la Información; en la que los dispositivos electrónicos se harán una parte incorporada de la vida diaria, encajados en casi cada producto. Es necesario un conocimiento cuidadoso de los desafíos para aprovechar la amplia gama de ocasiones ofrecidas por tales capacidades de integración y las correspondientes posibilidades de diseño de sistemas electrónicos.
Download or read book SOC Design Methodologies written by Michel Robert and published by Springer. This book was released on 2013-03-15 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 11 th IFIP International Conference on Very Large Scale Integration, in Montpellier, France, December 3-5,2001, was a great success. The main focus was about IP Cores, Circuits and System Designs & Applications as well as SOC Design Methods and CAD. This book contains the best papers (39 among 70) that have been presented during the conference. Those papers deal with all aspects of importance for the design of the current and future integrated systems. System on Chip (SOC) design is today a big challenge for designers, as a SOC may contain very different blocks, such as microcontrollers, DSPs, memories including embedded DRAM, analog, FPGA, RF front-ends for wireless communications and integrated sensors. The complete design of such chips, in very deep submicron technologies down to 0.13 mm, with several hundreds of millions of transistors, supplied at less than 1 Volt, is a very challenging task if design, verification, debug and industrial test are considered. The microelectronic revolution is fascinating; 55 years ago, in late 1947, the transistor was invented, and everybody knows that it was by William Shockley, John Bardeen and Walter H. Brattein, Bell Telephone Laboratories, which received the Nobel Prize in Physics in 1956. Probably, everybody thinks that it was recognized immediately as a major invention.
Download or read book Essentials of Electronic Testing for Digital Memory and Mixed Signal VLSI Circuits written by M. Bushnell and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.
Download or read book Digital System Test and Testable Design written by Zainalabedin Navabi and published by Springer Science & Business Media. This book was released on 2010-12-10 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about digital system testing and testable design. The concepts of testing and testability are treated together with digital design practices and methodologies. The book uses Verilog models and testbenches for implementing and explaining fault simulation and test generation algorithms. Extensive use of Verilog and Verilog PLI for test applications is what distinguishes this book from other test and testability books. Verilog eliminates ambiguities in test algorithms and BIST and DFT hardware architectures, and it clearly describes the architecture of the testability hardware and its test sessions. Describing many of the on-chip decompression algorithms in Verilog helps to evaluate these algorithms in terms of hardware overhead and timing, and thus feasibility of using them for System-on-Chip designs. Extensive use of testbenches and testbench development techniques is another unique feature of this book. Using PLI in developing testbenches and virtual testers provides a powerful programming tool, interfaced with hardware described in Verilog. This mixed hardware/software environment facilitates description of complex test programs and test strategies.
Download or read book VLSI Test Principles and Architectures written by Laung-Terng Wang and published by Elsevier. This book was released on 2006-08-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to new DFT methods that will show the readers how to design a testable and quality product, drive down test cost, improve product quality and yield, and speed up time-to-market and time-to-volume. Most up-to-date coverage of design for testability. Coverage of industry practices commonly found in commercial DFT tools but not discussed in other books. Numerous, practical examples in each chapter illustrating basic VLSI test principles and DFT architectures.
Download or read book Computer Arithmetic written by Mircea Vlăduţiu and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is the analysis and design of digital devices that implement computer arithmetic. The book's presentation of high-level detail, descriptions, formalisms and design principles means that it can support many research activities in this field, with an emphasis on bridging the gap between algorithm optimization and hardware implementation. The author provides a unified view linking the domains of digital design and arithmetic algorithms, based on original formalisms and hardware description languages. A feature of the book is the large number of examples and the implementation details provided. While the author does not avoid high-level details, providing for example gate-level designs for all matrix/combinational arithmetic structures. The book is suitable for researchers and students engaged with hardware design in computer science and engineering. A feature of the book is the large number of examples and the implementation details provided. While the author does not avoid high-level details, providing for example gate-level designs for all matrix/combinational arithmetic structures. The book is suitable for researchers and students engaged with hardware design in computer science and engineering.
Download or read book System on Chip Test Architectures written by Laung-Terng Wang and published by Morgan Kaufmann. This book was released on 2010-07-28 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronics testing has a legacy of more than 40 years. The introduction of new technologies, especially nanometer technologies with 90nm or smaller geometry, has allowed the semiconductor industry to keep pace with the increased performance-capacity demands from consumers. As a result, semiconductor test costs have been growing steadily and typically amount to 40% of today's overall product cost. This book is a comprehensive guide to new VLSI Testing and Design-for-Testability techniques that will allow students, researchers, DFT practitioners, and VLSI designers to master quickly System-on-Chip Test architectures, for test debug and diagnosis of digital, memory, and analog/mixed-signal designs. Emphasizes VLSI Test principles and Design for Testability architectures, with numerous illustrations/examples. Most up-to-date coverage available, including Fault Tolerance, Low-Power Testing, Defect and Error Tolerance, Network-on-Chip (NOC) Testing, Software-Based Self-Testing, FPGA Testing, MEMS Testing, and System-In-Package (SIP) Testing, which are not yet available in any testing book. Covers the entire spectrum of VLSI testing and DFT architectures, from digital and analog, to memory circuits, and fault diagnosis and self-repair from digital to memory circuits. Discusses future nanotechnology test trends and challenges facing the nanometer design era; promising nanotechnology test techniques, including Quantum-Dots, Cellular Automata, Carbon-Nanotubes, and Hybrid Semiconductor/Nanowire/Molecular Computing. Practical problems at the end of each chapter for students.
Download or read book Networks on Chip written by Axel Jantsch and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the number of processor cores and IP blocks integrated on a single chip is steadily growing, a systematic approach to design the communication infrastructure becomes necessary. Different variants of packed switched on-chip networks have been proposed by several groups during the past two years. This book summarizes the state of the art of these efforts and discusses the major issues from the physical integration to architecture to operating systems and application interfaces. It also provides a guideline and vision about the direction this field is moving to. Moreover, the book outlines the consequences of adopting design platforms based on packet switched network. The consequences may in fact be far reaching because many of the topics of distributed systems, distributed real-time systems, fault tolerant systems, parallel computer architecture, parallel programming as well as traditional system-on-chip issues will appear relevant but within the constraints of a single chip VLSI implementation.
Download or read book VLSI SOC From Systems to Chips written by Manfred Glesner and published by Springer Science & Business Media. This book was released on 2006-05-17 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph, divided into four parts, presents a comprehensive treatment and systematic examination of cycle spaces of flag domains. Assuming only a basic familiarity with the concepts of Lie theory and geometry, this work presents a complete structure theory for these cycle spaces, as well as their applications to harmonic analysis and algebraic geometry. Key features include: accessible to readers from a wide range of fields, with all the necessary background material provided for the nonspecialist; many new results presented for the first time; driven by numerous examples; the exposition is presented from the complex geometric viewpoint, but the methods, applications and much of the motivation also come from real and complex algebraic groups and their representations, as well as other areas of geometry; comparisons with classical Barlet cycle spaces are given; and good bibliography and index. Researchers and graduate students in differential geometry, complex analysis, harmonic analysis, representation theory, transformation groups, algebraic geometry, and areas of global geometric analysis will benefit from this work.
Download or read book Algorithms Architectures and Information Systems Security written by Bhargab B. Bhattacharya and published by World Scientific. This book was released on 2009 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains articles written by leading researchers in the fields of algorithms, architectures, and information systems security. The first five chapters address several challenging geometric problems and related algorithms. These topics have major applications in pattern recognition, image analysis, digital geometry, surface reconstruction, computer vision and in robotics. The next five chapters focus on various optimization issues in VLSI design and test architectures, and in wireless networks. The last six chapters comprise scholarly articles on information systems security covering privacy issues, access control, enterprise and network security, and digital image forensics.
Download or read book Semiconductors written by Artur Balasinski and published by CRC Press. This book was released on 2018-09-03 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the continuous evolution of integrated circuit manufacturing (ICM) and design for manufacturability (DfM), most books on the subject are obsolete before they even go to press. That’s why the field requires a reference that takes the focus off of numbers and concentrates more on larger economic concepts than on technical details. Semiconductors: Integrated Circuit Design for Manufacturability covers the gradual evolution of integrated circuit design (ICD) as a basis to propose strategies for improving return-on-investment (ROI) for ICD in manufacturing. Where most books put the spotlight on detailed engineering enhancements and their implications for device functionality, in contrast, this one offers, among other things, crucial, valuable historical background and roadmapping, all illustrated with examples. Presents actual test cases that illustrate product challenges, examine possible solution strategies, and demonstrate how to select and implement the right one This book shows that DfM is a powerful generic engineering concept with potential extending beyond its usual application in automated layout enhancements centered on proximity correction and pattern density. This material explores the concept of ICD for production by breaking down its major steps: product definition, design, layout, and manufacturing. Averting extended discussion of technology, techniques, or specific device dimensions, the author also avoids the clumsy chapter architecture that can hinder other books on this subject. The result is an extremely functional, systematic presentation that simplifies existing approaches to DfM, outlining a clear set of criteria to help readers assess reliability, functionality, and yield. With careful consideration of the economic and technical trade-offs involved in ICD for manufacturing, this reference addresses techniques for physical, electrical, and logical design, keeping coverage fresh and concise for the designers, manufacturers, and researchers defining product architecture and research programs.
Download or read book Electronic Design Automation written by Laung-Terng Wang and published by Morgan Kaufmann. This book was released on 2009-03-11 with total page 971 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides broad and comprehensive coverage of the entire EDA flow. EDA/VLSI practitioners and researchers in need of fluency in an "adjacent" field will find this an invaluable reference to the basic EDA concepts, principles, data structures, algorithms, and architectures for the design, verification, and test of VLSI circuits. Anyone who needs to learn the concepts, principles, data structures, algorithms, and architectures of the EDA flow will benefit from this book. Covers complete spectrum of the EDA flow, from ESL design modeling to logic/test synthesis, verification, physical design, and test - helps EDA newcomers to get "up-and-running" quickly Includes comprehensive coverage of EDA concepts, principles, data structures, algorithms, and architectures - helps all readers improve their VLSI design competence Contains latest advancements not yet available in other books, including Test compression, ESL design modeling, large-scale floorplanning, placement, routing, synthesis of clock and power/ground networks - helps readers to design/develop testable chips or products Includes industry best-practices wherever appropriate in most chapters - helps readers avoid costly mistakes
