Download or read book Approximate Boundary Conditions in Electromagnetics written by Thomas B. A. Senior and published by IET. This book was released on 1995 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively describes a variety of methods for the approximate simulation of material surfaces.
Download or read book Nonlinear Mechanics of Thin Walled Structures written by Yury Vetyukov and published by Springer Science & Business Media. This book was released on 2014-01-23 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a hybrid approach to the mechanics of thin bodies. Classical theories of rods, plates and shells with constrained shear are based on asymptotic splitting of the equations and boundary conditions of three-dimensional elasticity. The asymptotic solutions become accurate as the thickness decreases, and the three-dimensional fields of stresses and displacements can be determined. The analysis includes practically important effects of electromechanical coupling and material inhomogeneity. The extension to the geometrically nonlinear range uses the direct approach based on the principle of virtual work. Vibrations and buckling of pre-stressed structures are studied with the help of linearized incremental formulations, and direct tensor calculus rounds out the list of analytical techniques used throughout the book. A novel theory of thin-walled rods of open profile is subsequently developed from the models of rods and shells, and traditionally applied equations are proven to be asymptotically exact. The influence of pre-stresses on the torsional stiffness is shown to be crucial for buckling analysis. Novel finite element schemes for classical rod and shell structures are presented with a comprehensive discussion regarding the theoretical basis, computational aspects and implementation details. Analytical conclusions and closed-form solutions of particular problems are validated against numerical results. The majority of the simulations were performed in the Wolfram Mathematica environment, and the compact source code is provided as a substantial and integral part of the book.
Download or read book Surface Impedance Boundary Conditions written by Sergey V. Yuferev and published by CRC Press. This book was released on 2018-09-03 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Impedance Boundary Conditions is perhaps the first effort to formalize the concept of SIBC or to extend it to higher orders by providing a comprehensive, consistent, and thorough approach to the subject. The product of nearly 12 years of research on surface impedance, this book takes the mystery out of the largely overlooked SIBC. It provides an understanding that will help practitioners select, use, and develop these efficient modeling tools for their own applications. Use of SIBC has often been viewed as an esoteric issue, and they have been applied in a very limited way, incorporated in computation as an ad hoc means of simplifying the treatment for specific problems. Apply a Surface Impedance "Toolbox" to Develop SIBCs for Any Application The book not only outlines the need for SIBC but also offers a simple, systematic method for constructing SIBC of any order based on a perturbation approach. The formulation of the SIBC within common numerical techniques—such as the boundary integral equations method, the finite element method, and the finite difference method—is discussed in detail and elucidated with specific examples. Since SIBC are often shunned because their implementation usually requires extensive modification of existing software, the authors have mitigated this problem by developing SIBCs, which can be incorporated within existing software without system modification. The authors also present: Conditions of applicability, and errors to be expected from SIBC inclusion Analysis of theoretical arguments and mathematical relationships Well-known numerical techniques and formulations of SIBC A practical set of guidelines for evaluating SIBC feasibility and maximum errors their use will produce A careful mix of theory and practical aspects, this is an excellent tool to help anyone acquire a solid grasp of SIBC and maximize their implementation potential.
Download or read book Applications of Advanced Electromagnetics written by Guennadi A. Kouzaev and published by Springer Science & Business Media. This book was released on 2012-10-30 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, directed to the microwave engineers and Master and PhD students, is on the use of electromagnetics to the development and design of advanced integrated components distinguished by their extended field of applications. The results of hundreds of authors scattered in numerous journals and conference proceedings are carefully reviewed and classed. Several chapters are to refresh the knowledge of readers in advanced electromagnetics. New techniques are represented by compact electromagnetic–quantum equations which can be used in modeling of microwave-quantum integrated circuits of future In addition, a topological method to the boundary value problem analysis is considered with the results and examples. One extended chapter is for the development and design of integrated components for extended bandwidth applications, and the technology and electromagnetic issues of silicon integrated transmission lines, transitions, filters, power dividers, directional couplers, etc are considered. Novel prospective interconnects based on different physical effects are reviewed as well. The ideas of topology is applicable to the electromagnetic signaling and computing, when the vector field maps can carry discrete information, and this area and the results in topological signaling obtained by different authors are analyzed, including the recently designed predicate logic processor operating spatially represented signal units. The book is rich of practical examples, illustrations, and references and useful for the specialists working at the edge of contemporary technology and electromagnetics.
Download or read book Designing Quiet Structures written by Gary H. Koopmann and published by Elsevier. This book was released on 1997-10-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of its kind. It provides the reader with a logical and highly quantitative means of including noise as a parameter in the early design stages of a machine or structure. The unique and unified methodology builds upon the familiar disciplines of acoustics, structural dynamics and optimization. It also exemplifies the art of simplification - the essence of all good engineering design. Strategies for designing quiet structures require extensive analytical and experimental tools. For computing the sound power from complex structures the authors recommend a new 3-D, lumped parameter formulation. This fully developed, user-friendly program can be applied generally to noise-control-by-design problems. Detailed instructions for running the application are given in the appendix as well as several sample problems to help the user get started. The authors also describe a new instrument: a specially developed resistance probe used to measure a structure=92s acoustic surface resistance. As an example, the procedure is outlined for measuring the valve cover of an internal combustion engine. Indeed, throughout the book the reader is presented with actual experiments, numerical and physical that they can replicate in their own laboratory. This is a must-have book for engineers working in industries that include noise control in the design of a product. Its practical and didactic approach also makes it ideally suited to graduate students. - First text covering the design of quiet structures - Written by two of the leading experts in the world in the area of noise control - Strong in its integration of structural dynamics, acoustics, and optimization theory - Accompanied by a computer program that allows the computation of sound power - Presents numerous applications of noise-control-by-design methods as well as methods for enclosed and open spaces - Each chapter is supported by homework problems and demonstration experiments
Download or read book Nonlinear Wave Dynamics of Materials and Structures written by Holm Altenbach and published by Springer Nature. This book was released on 2020-04-22 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book marks the 60th birthday of Prof. Vladimir Erofeev – a well-known specialist in the field of wave processes in solids, fluids, and structures. Featuring a collection of papers related to Prof. Erofeev’s contributions in the field, it presents articles on the current problems concerning the theory of nonlinear wave processes in generalized continua and structures. It also discusses a number of applications as well as various discrete and continuous dynamic models of structures and media and problems of nonlinear acoustic diagnostics.
Download or read book Classical and Advanced Theories of Thin Structures written by Antonio Morassi and published by Springer Science & Business Media. This book was released on 2009-06-22 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents an updated state-of-the-art overview of the general aspects and practical applications of the theories of thin structures, through the interaction of several topics, ranging from non-linear thin-films, shells, junctions, beams of different materials and in different contexts (elasticity, plasticity, etc.). Advanced problems like the optimal design and the modeling of thin films made of brittle or phase-transforming materials will be presented as well.
Download or read book Elastic Waves in Composite Media and Structures written by Subhendu K. Datta and published by CRC Press. This book was released on 2019-04-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: New applications for composite materials are being developed at a rapid pace. However, their complex microstructures present considerable challenges for nondestructive testing and characterization. Ultrasonic waves provide quantitative means of nondestructive evaluation of these materials and structures. For this purpose, it is necessary to obtain
Download or read book Functional Analysis Approximation Theory and Numerical Analysis written by John Michael Rassias and published by World Scientific. This book was released on 1994 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers written by outstanding mathematicians. It deals with both theoretical and applied aspects of the mathematical contributions of BANACH, ULAM, and OSTROWSKI, which broaden the horizons of Functional Analysis, Approximation Theory, and Numerical Analysis in accordance with contemporary mathematical standards.
Download or read book Problems and Methods of Optimal Structural Design written by Nikolai Vladimirovich Banichuk and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author offers a systematic and careful development of many aspects of structural optimization, particularly for beams and plates. Some of the results are new and some have appeared only in specialized Soviet journals, or as pro ceedings of conferences, and are not easily accessible to Western engineers and mathematicians. Some aspects of the theory presented here, such as optimiza tion of anisotropic properties of elastic structural elements, have not been con sidered to any extent by Western research engineers. The author's treatment is "classical", i.e., employing classical analysis. Classical calculus of variations, the complex variables approach, and the Kolosov Muskhelishvili theory are the basic techniques used. He derives many results that are of interest to practical structural engineers, such as optimum designs of structural elements submerged in a flowing fluid (which is of obvious interest in aircraft design, in ship building, in designing turbines, etc.). Optimization with incomplete information concerning the loads (which is the case in a great majority of practical design considerations) is treated thoroughly. For example, one can only estimate the weight of the traffic on a bridge, the wind load, the additional loads if a river floods, or possible earthquake loads.
Download or read book Structural Analysis of Polymeric Composite Materials written by Mark E. Tuttle and published by CRC Press. This book was released on 2003-11-07 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Analysis of Polymeric Composite Materials studies the mechanics of composite materials and structures and combines classical lamination theory with macromechanic failure principles for prediction and optimization of composite structural performance. This reference addresses topics such as high-strength fibers, commercially-available compounds, and the behavior of anisotropic, orthotropic, and transversely isotropic materials and structures subjected to complex loading. It provides a wide variety of numerical analyses and examples throughout each chapter and details the use of easily-accessible computer programs for solutions to problems presented in the text.
Download or read book Combined Vibrator Slot Structures Theory and Applications written by Mikhail V. Nesterenko and published by Springer Nature. This book was released on 2020-11-27 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents solutions to a complex of internal and external problems of electromagnetics associated with the development of theory, construction of mathematical models and the development of rigorous methods for calculating the electrodynamic characteristics of combined vibrator-slot structures. The solutions of problems for determining the characteristics of impedance vibrator and slot radiators with arbitrary geometric and electrophysical parameters presented in the monograph were obtained within the framework of the unified methodological approach to construct asymptotic solutions of integral equations on currents and their systems. This approach made it possible to study a number of new combined vibrator-slot structures. The research results reveal the possibilities of using such structures as basic elements in the creation of modern antenna-waveguide devices operating in the ranges from meter to millimeter wavelengths, with new technical characteristics and functional purpose. The book is intended for senior and postgraduate students and researchers working in the fields of radiophysics, radio engineering and antenna-feeder design. The book covers the following topics: • excitation of electromagnetic waves in volumes with coordinate boundaries;• general issues of the theory of thin impedance vibrators and narrow slots in a spatial-frequency representation;• solution of current equations for isolated vibrator and slot scatterers;• combined radiating vibrator-slot structures in rectangular waveguide;• T-junctions of rectangular waveguides with vibrator-slot structures in coupling areas;• waveguide radiation of the combined vibrator-slot structures;• combined vibrator-slot structures located on a perfectly conducting sphere;• combined vibrator-slot Radiators in antenna arrays;• ultrawideband vibrator-slot structures;
Download or read book Journal of Communications Technology Electronics written by and published by . This book was released on 1998 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Control Problems for Partial Differential Equations on Reticulated Domains written by Peter I. Kogut and published by Springer Science & Business Media. This book was released on 2011-09-09 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the development of optimal control, the complexity of the systems to which it is applied has increased significantly, becoming an issue in scientific computing. In order to carry out model-reduction on these systems, the authors of this work have developed a method based on asymptotic analysis. Moving from abstract explanations to examples and applications with a focus on structural network problems, they aim at combining techniques of homogenization and approximation. Optimal Control Problems for Partial Differential Equations on Reticulated Domains is an excellent reference tool for graduate students, researchers, and practitioners in mathematics and areas of engineering involving reticulated domains.
Download or read book Surface Electromagnetics written by Fan Yang and published by Cambridge University Press. This book was released on 2019-06-20 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in the field, this text provides systematic coverage of the theory, physics, functional designs, and engineering applications of advanced engineered electromagnetic surfaces. All the essential topics are included, from the fundamental theorems of surface electromagnetics, to analytical models, general sheet transmission conditions (GSTC), metasurface synthesis, and quasi-periodic analysis. A plethora of examples throughout illustrate the practical applications of surface electromagnetics, including gap waveguides, modulated metasurface antennas, transmit arrays, microwave imaging, cloaking, and orbital angular momentum (OAM ) beam generation, allowing readers to develop their own surface electromagnetics-based devices and systems. Enabling a fully comprehensive understanding of surface electromagnetics, this is an invaluable text for researchers, practising engineers and students working in electromagnetics antennas, metasurfaces and optics.
Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Mechanics in Structural Engineering written by F.Y. Cheng and published by CRC Press. This book was released on 2003-10-04 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of Sino-US Joint Symposium/Workshop on Recent Developments and Future Trends of Computational Mechanics in Structural Engineering, Beijing, China, September 24-28 1991
