Download or read book Applied Microeconomic Analysis STATA And Solving Problems written by Alexander Shemetev and published by Alexander A Shemetev. This book was released on 2020-12-28 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can be divided into two parts. The first part is about using stata for the applied microeconomic analysis. We will estimate the local beer market in one of the metropolitan areas of the United States of America. The coding, plotting charts, and some derivations are included in this part. The second part is about the solution to the simple problems in microeconomics (please, see the table of content at the end of this book). Simple tasks are devoted to derivations, writing the first-order conditions, optimization problems, and finding the proper solution. I also put there my theorem on how to solve the social planner problem with the use of the matrices and the Cramer's rule. Although both the solution of this problem and the Cramer's rule is not a new thing, the application of the Cramer's rule for solving the problem of distribution in a social planner problem is a new thing. Although those problems are quite simple, they're not trivial. So I hope you will find this book useful.
Download or read book Econometric Analysis written by Sharif Hossain and published by Cambridge Scholars Publishing. This book was released on 2024-02-08 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last four decades, the uses of econometric tools and techniques, irrespective of discipline, have been increasing rapidly for solving problems, appropriate decision-making and policy formulation. Generally, it is accepted that the study of modern business and economics is incomplete without a proper knowledge of econometric tools and techniques. In view of the increasing complexity and variety of problems in business and economics, students and researchers may not be able to cope and hence may remain unfamiliar with many aspects of business and economic problems. Thus, this book was written to explore basic and advanced studies of econometrics for undergraduate and graduate students of business and economics, as well as for researchers already engaged in these fields who require an introduction to econometric methods and their application for solving of real-life problems. The book offers a balanced presentation of fundamental and advanced levels of econometric concepts and methods, along with practical examples of their effective application in real-life problems.
Download or read book Microeconometrics Using Stata Revised Edition written by A. Colin Cameron and published by Stata Press. This book was released on 2010-03-09 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and up-to-date survey of microeconometric methods available in Stata, Microeconometrics Using Stata, Revised Edition is an outstanding introduction to microeconometrics and how to execute microeconometric research using Stata. It covers topics left out of most microeconometrics textbooks and omitted from basic introductions to Stata. This revised edition has been updated to reflect the new features available in Stata 11 that are useful to microeconomists. Instead of using mfx and the user-written margeff commands, the authors employ the new margins command, emphasizing both marginal effects at the means and average marginal effects. They also replace the xi command with factor variables, which allow you to specify indicator variables and interaction effects. Along with several new examples, this edition presents the new gmm command for generalized method of moments and nonlinear instrumental-variables estimation. In addition, the chapter on maximum likelihood estimation incorporates enhancements made to ml in Stata 11. Throughout the book, the authors use simulation methods to illustrate features of the estimators and tests described and provide an in-depth Stata example for each topic discussed. They also show how to use Stata’s programming features to implement methods for which Stata does not have a specific command. The unique combination of topics, intuitive introductions to methods, and detailed illustrations of Stata examples make this book an invaluable, hands-on addition to the library of anyone who uses microeconometric methods.
Download or read book Applied Statistics Using Stata written by Mehmet Mehmetoglu and published by SAGE. This book was released on 2022-04-26 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Straightforward, clear, and applied, this book will give you the theoretical and practical basis you need to apply data analysis techniques to real data. Combining key statistical concepts with detailed technical advice, it addresses common themes and problems presented by real research, and shows you how to adjust your techniques and apply your statistical knowledge to a range of datasets. It also embeds code and software output throughout and is supported by online resources to enable practice and safe experimentation. The book includes: · Original case studies and data sets · Practical exercises and lists of commands for each chapter · Downloadable Stata programmes created to work alongside chapters · A wide range of detailed applications using Stata · Step-by-step guidance on writing the relevant code. This is the perfect text for anyone doing statistical research in the social sciences getting started using Stata for data analysis.
Download or read book Applied Health Economics written by Andrew M. Jones and published by Routledge. This book was released on 2013-05-07 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Applied Health Economics did an expert job of showing how the availability of large scale data sets and the rapid advancement of advanced econometric techniques can help health economists and health professionals make sense of information better than ever before. This second edition has been revised and updated throughout and includes a new chapter on the description and modelling of individual health care costs, thus broadening the book’s readership to those working on risk adjustment and health technology appraisal. The text also fully reflects the very latest advances in the health economics field and the key journal literature. Large-scale survey datasets, in particular complex survey designs such as panel data, provide a rich source of information for health economists. They offer the scope to control for individual heterogeneity and to model the dynamics of individual behaviour. However, the measures of outcome used in health economics are often qualitative or categorical. These create special problems for estimating econometric models. The dramatic growth in computing power over recent years has been accompanied by the development of methods that help to solve these problems. The purpose of this book is to provide a practical guide to the skills required to put these techniques into practice. Practical applications of the methods are illustrated using data on health from the British Health and Lifestyle Survey (HALS), the British Household Panel Survey (BHPS), the European Community Household Panel (ECHP), the US Medical Expenditure Panel Survey (MEPS) and Survey of Health, Ageing and Retirement in Europe (SHARE). There is a strong emphasis on applied work, illustrating the use of relevant computer software with code provided for Stata. Familiarity with the basic syntax and structure of Stata is assumed. The Stata code and extracts from the statistical output are embedded directly in the main text and explained at regular intervals. The book is built around empirical case studies, rather than general theory, and the emphasis is on learning by example. It presents a detailed dissection of methods and results of some recent research papers written by the authors and their colleagues. Relevant methods are presented alongside the Stata code that can be used to implement them and the empirical results are discussed at each stage. This text brings together the theory and application of health economics and econometrics, and will be a valuable reference for applied economists and students of health economics and applied econometrics.
Download or read book Microeconometrics written by A. Colin Cameron and published by Cambridge University Press. This book was released on 2005-05-09 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the most comprehensive treatment to date of microeconometrics, the analysis of individual-level data on the economic behavior of individuals or firms using regression methods for cross section and panel data. The book is oriented to the practitioner. A basic understanding of the linear regression model with matrix algebra is assumed. The text can be used for a microeconometrics course, typically a second-year economics PhD course; for data-oriented applied microeconometrics field courses; and as a reference work for graduate students and applied researchers who wish to fill in gaps in their toolkit. Distinguishing features of the book include emphasis on nonlinear models and robust inference, simulation-based estimation, and problems of complex survey data. The book makes frequent use of numerical examples based on generated data to illustrate the key models and methods. More substantially, it systematically integrates into the text empirical illustrations based on seven large and exceptionally rich data sets.
Download or read book Applied Statistics and Multivariate Data Analysis for Business and Economics written by Thomas Cleff and published by Springer. This book was released on 2019-07-10 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook will familiarize students in economics and business, as well as practitioners, with the basic principles, techniques, and applications of applied statistics, statistical testing, and multivariate data analysis. Drawing on practical examples from the business world, it demonstrates the methods of univariate, bivariate, and multivariate statistical analysis. The textbook covers a range of topics, from data collection and scaling to the presentation and simple univariate analysis of quantitative data, while also providing advanced analytical procedures for assessing multivariate relationships. Accordingly, it addresses all topics typically covered in university courses on statistics and advanced applied data analysis. In addition, it does not limit itself to presenting applied methods, but also discusses the related use of Excel, SPSS, and Stata.
Download or read book Public Policy Analysis written by William N. Dunn and published by Routledge. This book was released on 2017-08-04 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Public Policy Analysis, the most widely cited book on the subject, provides students with a comprehensive methodology of policy analysis. It starts from the premise that policy analysis is an applied social science discipline designed for solving practical problems facing public and nonprofit organizations. This thoroughly revised sixth edition contains a number of important updates: Each chapter includes an all-new "big ideas" case study in policy analysis to stimulate student interest in timely and important problems. The dedicated chapter on evidence-based policy and the role of field experiments has been thoroughly rewritten and expanded. New sections on important developments in the field have been added, including using scientific evidence in public policymaking, systematic reviews, meta-analyses, and "big data." Data sets to apply analytical techniques are included online as IBM SPSS 23.0 files and are convertible to Excel, Stata, and R statistical software programs to suit a variety of course needs and teaching styles. All-new PowerPoint slides are included to make instructor preparation easier than ever before. Designed to prepare students from a variety of academic backgrounds to conduct policy analysis on their own, without requiring a background in microeconomics, Public Policy Analysis, Sixth Edition helps students develop the practical skills needed to communicate findings through memos, position papers, and other forms of structured analytical writing. The text engages students by challenging them to critically analyze the arguments of policy practitioners as well as political scientists, economists, and political philosophers.
Download or read book Econometrics in Theory and Practice written by Panchanan Das and published by Springer Nature. This book was released on 2019-09-05 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces econometric analysis of cross section, time series and panel data with the application of statistical software. It serves as a basic text for those who wish to learn and apply econometric analysis in empirical research. The level of presentation is as simple as possible to make it useful for undergraduates as well as graduate students. It contains several examples with real data and Stata programmes and interpretation of the results. While discussing the statistical tools needed to understand empirical economic research, the book attempts to provide a balance between theory and applied research. Various concepts and techniques of econometric analysis are supported by carefully developed examples with the use of statistical software package, Stata 15.1, and assumes that the reader is somewhat familiar with the Strata software. The topics covered in this book are divided into four parts. Part I discusses introductory econometric methods for data analysis that economists and other social scientists use to estimate the economic and social relationships, and to test hypotheses about them, using real-world data. There are five chapters in this part covering the data management issues, details of linear regression models, the related problems due to violation of the classical assumptions. Part II discusses some advanced topics used frequently in empirical research with cross section data. In its three chapters, this part includes some specific problems of regression analysis. Part III deals with time series econometric analysis. It covers intensively both the univariate and multivariate time series econometric models and their applications with software programming in six chapters. Part IV takes care of panel data analysis in four chapters. Different aspects of fixed effects and random effects are discussed here. Panel data analysis has been extended by taking dynamic panel data models which are most suitable for macroeconomic research. The book is invaluable for students and researchers of social sciences, business, management, operations research, engineering, and applied mathematics.
Download or read book Introduction to Time Series Using Stata written by Sean Becketti and published by . This book was released on 2020-03-02 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Time Series Using Stata, Revised Edition, by Sean Becketti, is a practical guide to working with time-series data using Stata. In this book, Becketti introduces time-series techniques--from simple to complex--and explains how to implement them using Stata. The many worked examples, concise explanations that focus on intuition, and useful tips based on the author's experience make the book insightful for students, academic researchers, and practitioners in industry and government.Becketti is a financial industry veteran with decades of experience in academics, government, and private industry. He was also a developer of Stata in its infancy and has been a regular Stata user since its inception. He wrote many of the first time-series commands in Stata. With his abundant knowledge of Stata and extensive experience with real-world time-series applications, Becketti provides readers with unique insights and motivation throughout the book.For those new to Stata, the book begins with a mild yet fast-paced introduction to Stata, highlighting all the features you need to know to get started using Stata for time-series analysis. Before diving into analysis of time series, Becketti includes a quick refresher on statistical foundations such as regression and hypothesis testing.The discussion of time-series analysis begins with techniques for smoothing time series. As the moving-average and Holt-Winters techniques are introduced, Becketti explains the concepts of trends, cyclicality, and seasonality and shows how they can be extracted from a series. The book then illustrates how to use these methods for forecasting. Although these techniques are sometimes neglected in other time-series books, they are easy to implement, can be applied quickly, often produce forecasts just as good as more complicated techniques, and, as Becketti emphasizes, have the distinct advantage of being easily explained to colleagues and policy makers without backgrounds in statistics.Next, the book focuses on single-equation time-series models. Becketti discusses regression analysis in the presence of autocorrelated disturbances as well as the ARIMA model and Box-Jenkins methodology. An entire chapter is devoted to applying these techniques to develop an ARIMA-based model of U.S. GDP; this will appeal to practitioners, in particular, because it goes step by step through a real-world example: here is my series, now how do I fit an ARIMA model to it? The discussion of single-equation models concludes with a self-contained summary of ARCH/GARCH modeling.In the final portion of the book, Becketti discusses multiple-equation models. He introduces VAR models and uses a simple model of the U.S. economy to illustrate all key concepts, including model specification, Granger causality, impulse-response analyses, and forecasting. Attention then turns to nonstationary time-series. Becketti masterfully navigates the reader through the often-confusing task of specifying a VEC model, using an example based on construction wages in Washington, DC, and surrounding states.Introduction to Time Series Using Stata, Revised Edition, by Sean Becketti, is a first-rate, example-based guide to time-series analysis and forecasting using Stata. This is a must-have resource for researchers and students learning to analyze time-series data and for anyone wanting to implement time-series methods in Stata. [ed.]
Download or read book Learning Microeconometrics with R written by Christopher P. Adams and published by CRC Press. This book was released on 2020-12-29 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the assumptions underlying the algorithms rather than their statistical properties Presents cutting-edge analysis of factor models and finite mixture models. Uses a hands-on approach to examine the assumptions made by the models and when the models fail to estimate accurately Utilizes interesting real-world data sets that can be used to analyze important microeconomic problems Introduces R programming concepts throughout the book. Includes appendices that discuss many of the concepts introduced in the book, as well as measures of uncertainty in microeconometrics.
Download or read book A Practitioner s Guide to Stochastic Frontier Analysis Using Stata written by Subal C. Kumbhakar and published by Cambridge University Press. This book was released on 2015-01-26 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practitioner's Guide to Stochastic Frontier Analysis Using Stata provides practitioners in academia and industry with a step-by-step guide on how to conduct efficiency analysis using the stochastic frontier approach. The authors explain in detail how to estimate production, cost, and profit efficiency and introduce the basic theory of each model in an accessible way, using empirical examples that demonstrate the interpretation and application of models. This book also provides computer code, allowing users to apply the models in their own work, and incorporates the most recent stochastic frontier models developed in academic literature. Such recent developments include models of heteroscedasticity and exogenous determinants of inefficiency, scaling models, panel models with time-varying inefficiency, growth models, and panel models that separate firm effects and persistent and transient inefficiency. Immensely helpful to applied researchers, this book bridges the chasm between theory and practice, expanding the range of applications in which production frontier analysis may be implemented.
Download or read book Advanced Research Methods in the Built Environment written by Andrew Knight and published by John Wiley & Sons. This book was released on 2009-03-16 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a bridge between the introductory research methods books and the discipline-specific, higher level texts. Its unique feature is the coverage of the detailed process of research rather than the findings of research projects. Chapter authors have been carefully selected by their expertise, discipline and location to give an eclectic range of perspectives. Particular care has been taken to balance positivist with interpretivist approaches throughout. The authors focus is on the practical consequences of research philosophies, strategies and techniques by using their own research and by evaluating the work of others. Advanced Research Methods in the Built Environment addresses common topics raised by postgraduate level researchers rather than dealing with all aspects of the research process. Issues covered range from the practicalities of producing a journal article to the role of theory in research. The material brought together here provides a valuable resource for the training and development of doctoral and young researchers and will contribute to a new sense of shared methodological understanding across built environment research.
Download or read book Journal of Economic Literature written by and published by . This book was released on 2004 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enhancing Student Centred Teaching in Higher Education written by Karen Gravett and published by Springer Nature. This book was released on 2020-01-22 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores student-staff partnerships through a breadth of co-authored research projects. There is a significant gap in current literature regarding student-staff partnerships, both in the sharing of examples as well as in the examination of partnership working and its impact. Organised into four thematic sections, the editors and contributors highlight the diversity of routes students and staff can take to work in partnership, as well as how research, learning and teaching can be co-created. Written by both university staff and student researchers, the chapters consider the benefits of student-staff partnerships as an antidote to consumerist visions of higher education, and a way of celebrating the potential of students and their voices. This book will be of interest and value to scholars of student-staff partnerships.
Download or read book Business Innovation and Development in Emerging Economies written by Irwan Trinugroho and published by CRC Press. This book was released on 2019-05-16 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business Innovation driven by the advancement of technology has dramatically changed the business landscape over recent years, not only in advanced countries but also in emerging markets. It is expected that business innovation could help achieve economic inclusion, which has been a global initiative over the last decade, creating opportunities for all people to benefit from the economic development. These proceedings provide an outlet for discussing the importance of business innovation, especially in emerging countries in helping to reach inclusive economies. The papers cover the subject areas management, accounting, finance, economics and social sciences.
Download or read book Advanced Microeconomic Theory written by Felix Munoz-Garcia and published by MIT Press. This book was released on 2017-08-11 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to advanced topics in microeconomics that emphasizes the intuition behind assumptions and results, providing examples that show how to apply theory to practice. This textbook offers an introduction to advanced microeconomic theory that emphasizes the intuition behind mathematical assumptions, providing step-by-step examples that show how to apply theoretical models. It covers standard topics such as preference relations, demand theory and applications, producer theory, choice under uncertainty, partial and general equilibrium, monopoly, game theory and imperfect competition, externalities and public goods, and contract theory; but its intuitive and application-oriented approach provides students with a bridge to more technical topics. The book can be used by advanced undergraduates as well as Masters students in economics, finance, and public policy, and by PhD students in programs with an applied focus. The text connects each topic with recent findings in behavioral and experimental economics, and discusses these results in context, within the appropriate chapter. Step-by-step examples appear immediately after the main theoretical findings, and end-of chapter exercises help students understand how to approach similar exercises on their own. An appendix reviews basic mathematical concepts. A separate workbook, Practice Exercises for Advanced Microeconomic Theory, offers solutions to selected problems with detailed explanations. The textbook and workbook together help students improve both their theoretical and practical preparation in advanced microeconomics.