Download or read book Sheet Metal Forming Processes written by Dorel Banabic and published by Springer Science & Business Media. This book was released on 2010-06-21 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of virtual manufacturing has been developed in order to increase the industrial performances, being one of the most ef cient ways of reducing the m- ufacturing times and improving the quality of the products. Numerical simulation of metal forming processes, as a component of the virtual manufacturing process, has a very important contribution to the reduction of the lead time. The nite element method is currently the most widely used numerical procedure for s- ulating sheet metal forming processes. The accuracy of the simulation programs used in industry is in uenced by the constitutive models and the forming limit curves models incorporated in their structure. From the above discussion, we can distinguish a very strong connection between virtual manufacturing as a general concept, ?nite element method as a numerical analysis instrument and constitutive laws,aswellas forming limit curves as a speci city of the sheet metal forming processes. Consequently, the material modeling is strategic when models of reality have to be built. The book gives a synthetic presentation of the research performed in the eld of sheet metal forming simulation during more than 20 years by the members of three international teams: the Research Centre on Sheet Metal Forming—CERTETA (Technical University of Cluj-Napoca, Romania); AutoForm Company from Zürich, Switzerland and VOLVO automotive company from Sweden. The rst chapter presents an overview of different Finite Element (FE) formu- tions used for sheet metal forming simulation, now and in the past.
Download or read book Numerical Modelling of Material Deformation Processes written by Peter Hartley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal aim of this text is to encourage the development and application of numerical modelling techniques as an aid to achieving greater efficiency and optimization of metal-forming processes. The contents of this book have therefore been carefully planned to provide both an introduction to the fundamental theory of material deformation simulation, and also a comprehensive survey of the "state-of-the-art" of deformation modelling techniques and their application to specific and industrially relevant processes. To this end, leading international figures in the field of material deformation research have been invited to contribute chapters on subjects on which they are acknowledged experts. The information in this book has been arranged in four parts: Part I deals with plasticity theory, Part II with various numerical modelling techniques, Part III with specific process applications and material phenomena and Part IV with integrated computer systems. The objective of Part I is to establish the underlying theory of material deformation on which the following chapters can build. It begins with a chapter which reviews the basic theories of classical plasticity and describes their analytical representations. The second chapter moves on to look at the theory of deforming materials and shows how these expressions may be used in numerical techniques. The last two chapters of Part I provide a review of isotropic plasticity and anisotropic plasticity.
Download or read book Numerical Methods in Industrial Forming Processes written by Jan Kusiak and published by Springer Nature. This book was released on with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Forming written by Taylan Altan and published by ASM International(OH). This book was released on 1983 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Briefly reviews the basic principles of metal forming but major emphasis is on the latest developments in the design of metal-forming operations and tooling. Discusses the position of metal forming in manufacturing and considers a metal-forming process as a system consisting of several interacting variables. Includes an overall review and classification of all metal-forming processes. The fundamentals of plastic deformation - metal flow, flow stress of metals and yield criteria - are discussed, as are significant practical variables of metal- forming processes such as friction, temperatures and forming machines and their characteristics. Examines approximate methods of analyzing simple forming operations, then looks at massive forming processes such as closed-die forging, hot extrusion, cold forging/ extrusion, rolling and drawing (discussion includes the prediction of stresses and load in each process and applications of computer-aided techniques). Recent developments in metal-forming technology, including CAD/CAM for die design and manufacture, are discussed, and a review of the latest trends in metal flow analysis and simulations.
Download or read book Metal Forming Analysis written by R. H. Wagoner and published by Cambridge University Press. This book was released on 2001-05-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2001 book describes the most important numerical techniques for simulating metal forming operations.
Download or read book Simulation of Material Processing Theory Methods and Application written by Ken-ichiro Mori and published by CRC Press. This book was released on 2001-01-01 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains about 180 papers including seven keynotes presented at the 7th NUMIFORM Conference. It reflects the state-of-the-art of simulation of industrial forming processes such as rolling, forging, sheet metal forming, injection moulding and casting.
Download or read book Numerical Analysis of Forming Processes written by J. F. T. Pittman and published by John Wiley & Sons. This book was released on 1984 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Element Method for the Simulation of Structures and Processes written by Francisco Chinesta and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational mechanics is the discipline concerned with the use of computational methods to study phenomena governed by the principles of mechanics. Before the emergence of computational science (also called scientific computing) as a "third way" besides theoretical and experimental sciences, computational mechanics was widely considered to be a sub-discipline of applied mechanics. It is now considered to be a sub-discipline within computational science. This book presents a recent state of the art on the foundations and applications of the meshless natural element method in computational mechanics, including structural mechanics and material forming processes involving solids and Newtonian and non-Newtonian fluids.
Download or read book Mechanics of Sheet Metal Forming written by Z. Marciniak and published by Butterworth-Heinemann. This book was released on 2002-06-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material properties -- Sheet deformation processes -- Deformation of sheet in plane stress -- Simplified stamping analysis -- Load instability and tearing -- Bending of sheet -- Simplified analysis of circular shells -- Cylindrical deep drawing -- Stretching circular shells -- Combined bending and tension of sheet -- Hydroforming.
Download or read book Metal Forming and the Finite Element Method written by the late Shiro Kobayashi and published by Oxford University Press. This book was released on 1989-03-09 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of computer-aided design and manufacturing techniques is becoming essential in modern metal-forming technology. Thus process modeling for the determination of deformation mechanics has been a major concern in research . In light of these developments, the finite element method--a technique by which an object is decomposed into pieces and treated as isolated, interacting sections--has steadily assumed increased importance. This volume addresses advances in modern metal-forming technology, computer-aided design and engineering, and the finite element method.
Download or read book Fundamentals Of Materials Modelling For Metals Processing Technologies Theories And Applications written by Jianguo Lin and published by World Scientific Publishing Company. This book was released on 2015-03-24 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the unique theory developed over years of research on materials and process modelling and its application in metal forming technologies. It starts with the introduction of fundamental theories on the mechanics of materials, computational mechanics and the formulation of unified constitutive equations. Particular attention is paid to elastic-plastic formulations for cold metal forming and unified elastic-viscoplastic constitutive equations for warm/hot metals processing. Damage in metal forming and numerical techniques to solve and determine the unified constitutive equations are also detailed. Examples are given for the application of the unified theories to solve practical problems encountered in metal forming processes. This is particularly useful to predict microstructure evolution in warm/hot metal forming processes. Crystal plasticity theories and modelling techniques with their applications in micro-forming are also introduced in the book.The book is self-contained and unified in presentation. The explanations are highlighted to capture the interest of curious readers and complete enough to provide the necessary background material to further explore/develop new theories and applications.
Download or read book Modeling of Thermo Electro Mechanical Manufacturing Processes written by C. V. Nielsen and published by Springer Science & Business Media. This book was released on 2012-10-08 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling of Thermo-Electro-Mechanical Manufacturing Processes with Applications in Metal Forming and Resistance Welding provides readers with a basic understanding of the fundamental ingredients in plasticity, heat transfer and electricity that are necessary to develop and proper utilize computer programs based on the finite element flow formulation. Computer implementation of a wide range of theoretical and numerical subjects related to mesh generation, contact algorithms, elasticity, anisotropic constitutive equations, solution procedures and parallelization of equation solvers is comprehensively described. Illustrated and enriched with selected examples obtained from industrial applications, Modeling of Thermo-Electro-Mechanical Manufacturing Processes with Applications in Metal Forming and Resistance Welding works to diminish the gap between the developers of finite element computer programs and the professional engineers with expertise in industrial joining technologies by metal forming and resistance welding.
Download or read book Handbook of Research on Advancements in the Processing Characterization and Application of Lightweight Materials written by Kumar, Kaushik and published by IGI Global. This book was released on 2021-11-19 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the automotive industry, the need to reduce vehicle weight has given rise to extensive research efforts to develop aluminum and magnesium alloys for structural car body parts. In aerospace, the move toward composite airframe structures urged an increased use of formable titanium alloys. In steel research, there are ongoing efforts to design novel damage-controlled forming processes for a new generation of efficient and reliable lightweight steel components. All these materials, and more, constitute today’s research mission for lightweight structures. They provide a fertile materials science research field aiming to achieve a better understanding of the interplay between industrial processing, microstructure development, and the resulting material properties. The Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials provides the recent advancements in the lightweight mat materials processing, manufacturing, and characterization. This book identifies the need for modern tools and techniques for designing lightweight materials and addresses multidisciplinary approaches for applying their use. Covering topics such as numerical optimization, fatigue characterization, and process evaluation, this text is an essential resource for materials engineers, manufacturers, practitioners, engineers, academicians, chief research officers, researchers, students, and vice presidents of research in government, industry, and academia.
Download or read book Geometric Modeling and Processing GMP 2006 written by Myung-Soo Kim and published by Springer Science & Business Media. This book was released on 2006-07-11 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Geometric Modeling and Processing, GMP 2006, held in Pittsburgh, PA, USA in July 2006. The 36 revised full papers and 21 revised short papers presented were carefully reviewed and selected from a total of 84 submissions. All current issues in the area of geometric modeling and processing are addressed and the impact in such areas as computer graphics, computer vision, machining, robotics, and scientific visualization is shown. The papers are organized in topical sections on shape reconstruction, curves and surfaces, geometric processing, shape deformation, shape description, shape recognition, geometric modeling, subdivision surfaces, and engineering applications.
Download or read book Advanced Computational Materials Modeling written by Miguel Vaz Junior and published by John Wiley & Sons. This book was released on 2010-12-06 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its discussion of strategies for modeling complex materials using new numerical techniques, mainly those based on the finite element method, this monograph covers a range of topics including computational plasticity, multi-scale formulations, optimization and parameter identification, damage mechanics and nonlinear finite elements.
Download or read book Human Aspects in Computer Integrated Manufacturing written by G.J. Olling and published by Elsevier. This book was released on 2013-10-22 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume reflect the current research and development of advanced manufacturing software. They may be categorized as follows: New Concepts towards CIM, Product Realization through Product/Process Modelling, Intelligent Management and Control of Manufacturing Activities, and Development of CIM Systems.
Download or read book Innovations in Materials Processing written by Gordon Bruggeman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center in cooperation with the Office of Sponsored Programs of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conferences since 1954. The specific purpose of these conferences has been to bring together scientists and engineers from academic institutions, industry and government to explore in depth a subject of importance to the Department of Defense, the Army, and the scientific community. This 30th Sagamore Conference, entitled Innovations in Materials Processing, has attempted to focus on the inter disciplinary nature of materials processing, looking at recent advancements in the development of unit processes from a range of standpoints from the understanding and control of the under lying mechanisms through their application as part of a manufactur ing sequence. In between, the classic link between processing and materials properties is firmly established. A broad range of materials are treated in this manner: metals, ceramics, plastics, and composites. The interdisciplinary nature of materials processing exists through its involvement with the basic sciences, with, process and product design, with process control, and ultimately with manufacturing engineering. Materials processing is interdisciplinary in another sense, through its application within all materials disciplines. The industrial community (and the Army as its customer) is becoming increasingly concerned with producibility/reliability/ affordability issues in advanced product development. These concerns will be adequately addressed only by employing the full range of disciplines encompassed within the field of materials processing.
