Download or read book Applications of Energy Harvesting Technologies in Buildings written by Joseph W. Matiko and published by Artech House. This book was released on 2017-01-31 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely new resource explores the available energy sources within commercial and residential buildings and the available technologies for energy harvesting. Energy harvesting within built environments is presented using strong research and commercial examples. This book includes clear and concise case studies on solar cell powered sensor nodes for emotion monitoring systems in ambient assistive living environments and inductive/RF power transfers. Thermoelectric energy harvesting and power management circuit design, airflow and vibration energy harvesting is also explored. The book concludes with a look at the future of energy harvesting in buildings.
Download or read book Energy Harvesting Technologies in Buildings written by and published by . This book was released on 2018-05 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy use in buildings depends on a combination of good architecture and energy systems design and on effective operations and maintenance once the building is occupied. It should also be understood that different climates probably require different designs and equipment, and that the performance and value of any component technology depends on the system in which it is embedded. The primary purposes of building energy management are the reduction/management of building energy use; the reduction of electricity bills while increasing occupant comfort and productivity; and the improvement of environmental stewardship without adversely affecting standards of living. Building energy management systems provide a centralized platform for managing building energy usage. Since buildings consume a large fraction of the output of electric utilities, they can greatly impact utility operations. Specifically, buildings' ability to shift energy demand away from peak periods, such as on hot summer afternoons, can greatly reduce both cost and GHG emissions by allowing utilities to reduce the need for their least efficient and most polluting power plants. Coordinating building energy systems, on-site generation, and energy storage with other buildings and the utility can lower overall costs, decrease GHG emissions, and increase system-wide reliability.Energy Harvesting Technologies in Buildings presents the state of the art studies of the application of energy harvesting in commercial and residential buildings. Electromagnetic, kinetic, thermal and airflow-based energy sources are well-known as potential energy sources within buildings and the available energy is measured in a range of buildings. It presents insights into the high potential of energy harvesting technology in buildings and the relative attractions of various harvester technologies looking at the future of energy harvesting in buildings.
Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.
Download or read book Energy Harvesting Technologies written by Shashank Priya and published by Springer Science & Business Media. This book was released on 2008-11-28 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Harvesting Technologies provides a cohesive overview of the fundamentals and current developments in the field of energy harvesting. In a well-organized structure, this volume discusses basic principles for the design and fabrication of bulk and MEMS based vibration energy systems, theory and design rules required for fabrication of efficient electronics, in addition to recent findings in thermoelectric energy harvesting systems. Combining leading research from both academia and industry onto a single platform, Energy Harvesting Technologies serves as an important reference for researchers and engineers involved with power sources, sensor networks and smart materials.
Download or read book Energy Harvesting and Energy Efficiency written by Nicu Bizon and published by Springer. This book was released on 2017-03-09 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents basic and advanced concepts for energy harvesting and energy efficiency, as well as related technologies, methods, and their applications. The book provides up-to-date knowledge and discusses the state-of-the-art equipment and methods used for energy harvesting and energy efficiency, combining theory and practical applications. Containing over 200 illustrations and problems and solutions, the book begins with overview chapters on the status quo in this field. Subsequent chapters introduce readers to advanced concepts and methods. In turn, the final part of the book is dedicated to technical strategies, efficient methods and applications in the field of energy efficiency, which also makes it of interest to technicians in industry. The book tackles problems commonly encountered using basic methods of energy harvesting and energy efficiency, and proposes advanced methods to resolve these issues. All the methods proposed have been validated through simulation and experimental results. These “hot topics” will continue to be of interest to scientists and engineers in future decades and will provide challenges to researchers around the globe as issues of climate change and changing energy policies become more pressing. Here, readers will find all the basic and advanced concepts they need. As such, it offers a valuable, comprehensive guide for all students and practicing engineers who wishing to learn about and work in these fields.
Download or read book Advanced Thermoelectric Materials for Energy Harvesting Applications written by Saim Memon and published by BoD – Books on Demand. This book was released on 2019-10-30 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Thermoelectric Materials for Energy Harvesting Applications is a research-intensive textbook covering the fundamentals of thermoelectricity and the process of converting heat energy into electrical energy. It covers the design, implementation, and performance of existing and advanced thermoelectric materials. Chapters examine such topics as organic/inorganic thermoelectric materials, performance and behaviors of thermoelectric devices, and energy harvesting applications of thermoelectric devices.
Download or read book Robust Battery Management System Design With MATLAB written by Balakumar Balasingam and published by Artech House. This book was released on 2023-06-30 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces several battery management problems and provides solutions using model-based approaches. It provides detailed coverage of battery management problems, including battery impedance estimation, battery capacity estimation, state of charge estimation, state of health estimation, battery thermal management, and optimal charging algorithms. The book introduces important battery management problems in a modularized fashion, decoupling each battery management problem from others as much as possible, allowing you to focus on understanding a particular topic rather than having to understand all aspects of a battery management system. You will get the necessary background to understand, implement and improve battery fuel gauges in electric vehicles, and general state of health of the battery; use proven models and algorithms to estimate the thermal properties of a battery; and know the basics of smart battery charger design. You will also be equipped to accurately estimate battery features of vehicles, such as state of charge, expected charging time, and state of health, to make customized charging waveforms for each vehicle. The book teaches you how to create simulation environments to test and validate algorithms against model uncertainty and measurement noise. In addition, the importance of benchmarking battery management algorithms is covered, and several bench marking metrics are presented. Included MATLAB codes give you an easy way to test the algorithms using realistic data and to develop and test alternative solutions. This is a useful and timely guide for battery engineers at all levels, as well as research scientists and advanced students working in this robust and rapidly advancing area.
Download or read book Smart Grid Redefined Transformation of the Electric Utility written by Subramanian Vadari and published by Artech House. This book was released on 2018-02-28 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading expert in the utility field, this practical resource guides professionals in the evolution of the Smart Grid and offers insight into distribution automation, storage, and microgrid. This book highlights the journey to a transformed electric utility, provides solid examples, and includes real-world case studies. Readers find guidance on new energy storage solutions and electric value chain disruptors. Professionals learn how to overcome challenges related to integrating supply and demand diversity. The book highlights how new technologies impact the day-to-day operations of a utility and how these technologies can transform the normal functioning of the utility. Discussions are provided about how a transformed utility can be a springboard to a smart city. Professionals will be able to apply the strategies of technologies in this resource to guide them to success in the field. This book defines the roadmap to the utility of the future and provides a vision for how utilities can thrive in their new environment.
Download or read book Handbook of Energy Harvesting Power Supplies and Applications written by Peter Spies and published by CRC Press. This book was released on 2015-06-01 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals and principles of energy harvesting and provides the necessary theory and background to develop energy harvesting power supplies. It explains the overall system design and gives quantitative assumptions on environmental energy. It explains different system blocks for an energy harvesting power supply and the trade-offs. The text covers in detail different energy transducer technologies such as piezoelectric, electrodynamic, and thermoelectric generators and solar cells from the material to the component level and explains the appropriate power management circuits required in these systems. Furthermore, it describes and compares storage elements such as secondary batteries and supercapacitors to select the most appropriate one for the application. Besides power supplies that use ambient energy, the book presents systems that use electromagnetic fields in the radio frequency range. Finally, it discusses different application fields and presents examples of self-powered electronic systems to illustrate the content of the preceding chapters.
Download or read book Role of IoT in Green Energy Systems written by Ponnusamy, Vasaki and published by IGI Global. This book was released on 2021-02-05 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the era of Industry 4.0, the world is increasingly becoming smarter as everything from mobile phones to cars to TVs connects with unique addresses and communication mechanisms. However, in order to enable the smart world to be sustainable, ICT must embark into energy efficient paradigms. Green ICT is a moving factor contributing towards energy efficiency by reducing energy utilization through software or hardware procedures. Role of IoT in Green Energy Systems presents updated research trends in green technology and the latest product and application developments towards green energy. Covering topics that include energy conservation and harvesting, renewable energy, and green and underwater internet of things, this essential reference book creates further awareness of smart energy and critically examines the contributions of ICT towards green technologies. IT specialists, researchers, academicians, and students in the area of energy harvesting and energy management, and/or those working towards green energy technologies, wireless sensor networks, and smart applications will find this monograph beneficial in their studies.
Download or read book Energy Harvesting and Storage Materials Devices and Applications III written by Nibir K. Dhar and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes Proceedings Vol. 7821
Download or read book Vibration Control written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2010-08-18 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibrations are a part of our environment and daily life. Many of them are useful and are needed for many purposes, one of the best example being the hearing system. Nevertheless, vibrations are often undesirable and have to be suppressed or reduced, as they may be harmful to structures by generating damages or compromise the comfort of users through noise generation of mechanical wave transmission to the body. the purpose of this book is to present basic and advanced methods for efficiently controlling the vibrations and limiting their effects. Open-access publishing is an extraordinary opportunity for a wide dissemination of high quality research. This book is not an exception to this, and I am proud to introduce the works performed by experts from all over the world.
Download or read book Sustainable Energy Harvesting Technologies written by Yen Kheng Tan and published by BoD – Books on Demand. This book was released on 2011-12-22 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early 21st century, research and development of sustainable energy harvesting (EH) technologies have started. Since then, many EH technologies have evolved, advanced and even been successfully developed into hardware prototypes for sustaining the operational lifetime of low?power electronic devices like mobile gadgets, smart wireless sensor networks, etc. Energy harvesting is a technology that harvests freely available renewable energy from the ambient environment to recharge or put used energy back into the energy storage devices without the hassle of disrupting or even discontinuing the normal operation of the specific application. With the prior knowledge and experience developed over a decade ago, progress of sustainable EH technologies research is still intact and ongoing. EH technologies are starting to mature and strong synergies are formulating with dedicate application areas. To move forward, now would be a good time to setup a review and brainstorm session to evaluate the past, investigate and think through the present and understand and plan for the future sustainable energy harvesting technologies.
Download or read book Alternative Energy Systems in Buildings written by Enrique Rosales Asensio and published by MDPI. This book was released on 2020-06-16 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to evaluate alternative energy systems in buildings, regardless of their location and climatic conditions. Over the past few years, the use of passive cooling and heating technologies has become more common for reducing the energy consumption of buildings. However, for some building systems, these technologies are not used very often. Buildings intended for children or the elderly are often climatized to improve indoor thermal conditions. In this Special Issue, a cost reduction in climatization based on passive systems is expected to be conducted. Building site optimization is expected to be performed, to improve thermal behavior. To achieve this, computational fluid dynamics tools are expected to be used. These reductions are expected to be studied for conventional and renewable energy systems, showing that passive systems provide better thermal comfort and reduce the initial investment and energy consumption, making low-cost buildings feasible.
Download or read book Handbook of Smart Cities written by Juan Carlos Augusto and published by Springer. This book was released on 2021-07-17 with total page 1697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook presents a comprehensive and rigorous overview of the state-of-the-art on Smart Cities. It provides the reader with an authoritative, exhaustive one-stop reference on how the field has evolved and where the current and future challenges lie. From the foundations to the many overlapping dimensions (human, energy, technology, data, institutions, ethics etc.), each chapter is written by international experts and amply illustrated with figures and tables with an emphasis on current research. The Handbook is an invaluable desk reference for researchers in a wide variety of fields, not only smart cities specialists but also by scientists and policy-makers in related disciplines that are deeply influenced by the emergence of intelligent cities. It should also serve as a key resource for graduate students and young researchers entering the area, and for instructors who teach courses on these subjects. The handbook is also of interest to industry and business innovators.
Download or read book Energy Harvesting for Wireless Sensor Networks written by Olfa Kanoun and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-11-19 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless sensors and sensor networks (WSNs) are nowadays becoming increasingly important due to their decisive advantages. Different trends towards the Internet of Things (IoT), Industry 4.0 and 5G Networks address massive sensing and admit to have wireless sensors delivering measurement data directly to the Web in a reliable and easy manner. These sensors can only be supported, if sufficient energy efficiency and flexible solutions are developed for energy-aware wireless sensor nodes. In the last years, different possibilities for energy harvesting have been investigated showing a high level of maturity. This book gives therefore an overview on fundamentals and techniques for energy harvesting and energy transfer from different points of view. Different techniques and methods for energy transfer, management and energy saving on network level are reported together with selected interesting applications. The book is interesting for researchers, developers and students in the field of sensors, wireless sensors, WSNs, IoT and manifold application fields using related technologies. The book is organized in four major parts. The first part of the book introduces essential fundamentals and methods, while the second part focusses on vibration converters and hybridization. The third part is dedicated to wireless energy transfer, including both RF and inductive energy transfer. Finally, the fourth part of the book treats energy saving and management strategies. The main contents are: Essential fundamentals and methods of wireless sensors Energy harvesting from vibration Hybrid vibration energy converters Electromagnetic transducers Piezoelectric transducers Magneto-electric transducers Non-linear broadband converters Energy transfer via magnetic fields RF energy transfer Energy saving techniques Energy management strategies Energy management on network level Applications in agriculture Applications in structural health monitoring Application in power grids Prof. Dr. Olfa Kanoun is professor for measurement and sensor technology at Chemnitz university of technology. She is specialist in the field of sensors and sensor systems design.
Download or read book Energy Harvesting written by Alireza Khaligh and published by CRC Press. This book was released on 2017-12-19 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Also called energy scavenging, energy harvesting captures, stores, and uses "clean" energy sources by employing interfaces, storage devices, and other units. Unlike conventional electric power generation systems, renewable energy harvesting does not use fossil fuels and the generation units can be decentralized, thereby significantly reducing transmission and distribution losses. But advanced technical methods must be developed to increase the efficiency of devices in harvesting energy from environmentally friendly, "green" resources and converting them into electrical energy. Recognizing this need, Energy Harvesting: Solar, Wind, and Ocean Energy Conversion Systems describes various energy harvesting technologies, different topologies, and many types of power electronic interfaces for stand-alone utilization or grid connection of energy harvesting applications. Along with providing all the necessary concepts and theoretical background, the authors develop simulation models throughout the text to build a practical understanding of system analysis and modeling. With a focus on solar energy, the first chapter discusses the I−V characteristics of photovoltaic (PV) systems, PV models and equivalent circuits, sun tracking systems, maximum power point tracking systems, shading effects, and power electronic interfaces for grid-connected and stand-alone PV systems. It also presents sizing criteria for applications and modern solar energy applications, including residential, vehicular, naval, and space applications. The next chapter reviews different types of wind turbines and electrical machines as well as various power electronic interfaces. After explaining the energy generation technologies, optimal operation principles, and possible utilization techniques of ocean tidal energy harvesting, the book explores near- and offshore approaches for harvesting the kinetic and potential energy of ocean waves. It also describes the required absorber, turbine, and generator types, along with the power electronic interfaces for grid connection and commercialized ocean wave energy conversion applications. The final chapter deals with closed, open, and hybrid-cycle ocean thermal energy conversion systems.