Download or read book Probabilistic Fracture Mechanics and Fatigue Methods written by J. M. Bloom and published by ASTM International. This book was released on 1983 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of a Probabilistic Fracture Mechanics Model to the Influence of In Service Inspection on Structural Reliability written by DO. Harris and published by . This book was released on 1983 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: A probabilistic fracture mechanics model of structural reliability is described that considers failure to occur as the result of subcritical and catastrophic growth of pre-existing cracks that escape detection. The model considers cracks to be two-dimensional and is capable of treating many of the input parameters as random variables and can consider arbitrary inspection schedules. The two-dimensional model is greatly simplified when one-dimensional cracks are considered, and an analytical treatment of the influence of in-service inspection for the one-dimensional case reveals that the ratio of failure rates with and without inspection is independent of the crack size distribution. Numerical results for two-dimensional cracks in a weld joint in a large reactor pipe show that the ratio of failure rates is not highly dependent on the initial crack distribution, even for this more general case. Thus, it appears that an assessment of the relative benefit of in-service inspection does not require accurate knowledge of the initial crack distribution. Additionally, the results show that leaks in large pipes are not very probable, but are much more likely to occur than a sudden double-ended pipe break.
Download or read book Probabilistic Frature Mechanics and Fatigue Methods Applications for Structural Design and Maintenance written by and published by ASTM International. This book was released on with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Structural Mechanics Handbook written by C.R. Sundararajan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for a comprehensive book on probabilistic structural mechanics that brings together the many analytical and computational methods developed over the years and their applications in a wide spectrum of industries-from residential buildings to nuclear power plants, from bridges to pressure vessels, from steel structures to ceramic structures-became evident from the many discussions the editor had with practising engineers, researchers and professors. Because no single individual has the expertise to write a book with such a di.verse scope, a group of 39 authors from universities, research laboratories, and industries from six countries in three continents was invited to write 30 chapters covering the various aspects of probabilistic structural mechanics. The editor and the authors believe that this handbook will serve as a reference text to practicing engineers, teachers, students and researchers. It may also be used as a textbook for graduate-level courses in probabilistic structural mechanics. The editor wishes to thank the chapter authors for their contributions. This handbook would not have been a reality without their collaboration.
Download or read book Applied Fracture Mechanics written by Alexander Belov and published by BoD – Books on Demand. This book was released on 2012-12-12 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book "Applied Fracture Mechanics" presents a collection of articles on application of fracture mechanics methods to materials science, medicine, and engineering. In thirteen chapters, a wide range of topics is discussed, including strength of biological tissues, safety of nuclear reactor components, fatigue effects in pipelines, environmental effects on fracture among others. In addition, the book presents mathematical and computational methods underlying the fracture mechanics applications, and also developments in statistical modeling of fatigue. The work presented in this book will be useful, effective, and beneficial to mechanical engineers, civil engineers, and material scientists from industry, research, and education.
Download or read book Probabilistic Methods in the Mechanics of Solids and Structures written by S. Eggwertz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Probabilistic Methods in the Mechanics of Solids and Structures, dedicated to the memory of Waloddi Weibull, was held in Stockholm, Sweden, June 19-21, 1984, on the initiative of the Swedish National Committee for Mech anics and the Aeronautical Research Institute of Sweden, FFA. The purpose of the symposium was to bring together mathema ticians that develop the theory of stochastic processes and methods for reliability analysis, with engineers that apply these theories and methods to model loads, strengths and structures for the advancement of structural safety. Waloddi Weibull was a pioneer in this field with his many publi cations from the thirties until his death in 1979. He also took an active part in the formation of the International Union of Theoretical and Applied Mechanics during the forties, and subsequently initiated foundation of the Swedish National Committee for Mechanics, through which Sweden joined IUTAM as a member. 116 participants from 21 countries attended the symposium, and 55 invited papers were presented in 7 scientific sessions.
Download or read book Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering written by and published by . This book was released on 2002 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic fracture mechanics and reliability written by J.W. Provan and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of the 80's there has been an increasing need for analytic and numerical techniques, based on a thorough understanding of microstructural processes, that express in a manner suitable for practicing engineers the reliability of components and structures that are being subjected to degradation situations. Such situations fall within the framework offracture mechanics, fatigue, corrosion fatigue and pitting corrosion. Luckily, such techniques are now being developed and it was felt timely to combine in one volume reports by the leaders in this field who are currently making great strides towards solving these problems. Hence the idea of this monograph was born and I am pleased to be associated both with it and the contributors whose chapters are included in this volume. A very large part of the credit for this monograph must go to the authors who have taken time out from their busy schedules to prepare their submissions. They have all worked diligently over the last few months in order to get their manuscripts to me on time and I sincerely thank them for their help throughout the preparation of this volume.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 1993 with total page 2488 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the current volume, consisting of Parts A and B, edited vers ions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at Bowdoin College, Brunswick, Maine on July 28-August 2, 1991 have been collected. The Review was organized by the Center for NDE at Iowa State University and the Ames Laboratory of the USDOE in cooperation with a number of organizations including the Air Force Materials Directorate, Wright Laboratory, Wright Patterson Air Force Base, the American Society for Nondestructive Testing, the Center for NDE at Johns Hopkins University, Department of Energy, Federal Aviation Administration, National Institute of Standards and Technology, National Science Foundation IndustryjUniversity Cooperative Research Centers, and the Office of Naval Research. The 1991 Review of Progress in QNDE was attended by approximately 450 participants from the US and many foreign countries who presented over 360 papers. Divided into 36 sessions, with as many as four sessions running concurrently, the meeting covered all phases of NDE development from basic research to engineering applications and all methods of inspection science from acoustics to x-rays. Over the past ten years, the participants of the Review have seen it grow into one of the largest and most significant gatherings of NDE researchers and engineers anywhere in the world. By sharing their work at this conference, they deserve much credit for its success.
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Paper written by and published by . This book was released on 1984 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Life Testing and Reliability written by N. Balakrishnan and published by CRC Press. This book was released on 2023-07-21 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume presents chapters written on the areas of life-testing and reliability by many well-known researchers who have contributed significantly to these two areas over the years. Chapters cover a wide range of topics such as inference under censoring and truncation, reliability growth models, designs to improve quality, prediction techniques, Bayesian analysis of reliability, multivariate methods, accelerated testing, and more. The book is written in an easy-to-follow style, first presenting the necessary theoretical details and then illustrating the methods with a numerical examples wherever possible. Many tables and graphs that are essential for the use of some of the new methodologies are presented throughout the volume. Numerous examples provide the reader with a clear understanding of the methods presented as well as with insight into the applications of these results.
Download or read book Mechanical Vibration and Shock Analysis Fatigue Damage written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 4: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specification representing the effects produced by the set of vibrations imposed in a real-world environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the various hypotheses and models used to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting response peaks, which are used to establish a histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book ASME Technical Papers written by and published by . This book was released on 1984 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Underwater Inspection and Repair for Offshore Structures written by John V. Sharp and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: UNDERWATER INSPECTION AND REPAIR FOR OFFSHORE STRUCTURES Benefit from a much-needed, up-to-date handbook on underwater inspection and repair processes and technologies Underwater Inspection and Repair for Offshore Structures fills a gap in the literature to provide an overview of the inspection and repair processes for both steel and concrete offshore structures. Authors and noted experts on the topic John V. Sharp and Gerhard Esdal guide readers through the reasons why inspection and repair are performed and how both are linked to the management of structural integrity, statutory requirements, and various types of damage. The book addresses critical topics, including the execution and planning of inspection and repair, the tools and methods used, and their deployment underwater. The authors put particular focus on steel and concrete offshore oil and gas installations, but the content is also applicable to the substructures of offshore wind turbines. Underwater Inspection and Repair for Offshore Structures is complementary to the authors’ book Ageing and Life Extension of Offshore Structures, also from Wiley. This important book: Covers current inspection and monitoring techniques to evaluate existing structures Includes coverage of robotic (ROV) inspection and repair methods Provides an overview of repair and maintenance techniques applicable to the splash‑zone and underwater operations Written for engineers, designers, and safety auditors working with offshore structures. Underwater Inspection and Repair for Offshore Structures is a comprehensive resource for understanding how to effectively inspect and repair these vulnerable structures.
Download or read book Life Cycle of Engineering Systems Emphasis on Sustainable Civil Infrastructure written by Jaap Bakker and published by CRC Press. This book was released on 2016-11-18 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at IALCCE2016, the fifth International Symposium on Life-Cycle Civil Engineering (IALCCE2016), to be held in Delft, The Netherlands, October 16-19, 2016. It consists of a book of extended abstracts and a DVD with full papers including the Fazlur R. Khan lecture, keynote lectures, and technical papers from all over the world. All major aspects of life-cycle engineering are addressed, with special focus on structural damage processes, life-cycle design, inspection, monitoring, assessment, maintenance and rehabilitation, life-cycle cost of structures and infrastructures, life-cycle performance of special structures, and life-cycle oriented computational tools. The aim of the editors is to provide a valuable source for anyone interested in life-cycle of civil infrastructure systems, including students, researchers and practitioners from all areas of engineering and industry.
Download or read book Hydro Environmental Analysis written by James L. Martin and published by CRC Press. This book was released on 2013-12-04 with total page 5742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamental principles, Hydro-Environmental Analysis: Freshwater Environments presents in-depth information about freshwater environments and how they are influenced by regulation. It provides a holistic approach, exploring the factors that impact water quality and quantity, and the regulations, policy and management methods that are necessary to maintain this vital resource. It offers a historical viewpoint as well as an overview and foundation of the physical, chemical, and biological characteristics affecting the management of freshwater environments. The book concentrates on broad and general concepts, providing an interdisciplinary foundation. The author covers the methods of measurement and classification; chemical, physical, and biological characteristics; indicators of ecological health; and management and restoration. He also considers common indicators of environmental health; characteristics and operations of regulatory control structures; applicable laws and regulations; and restoration methods. The text delves into rivers and streams in the first half and lakes and reservoirs in the second half. Each section centers on the characteristics of those systems and methods of classification, and then moves on to discuss the physical, chemical, and biological characteristics of each. In the section on lakes and reservoirs, it examines the characteristics and operations of regulatory structures, and presents the methods commonly used to assess the environmental health or integrity of these water bodies. It also introduces considerations for restoration, and presents two unique aquatic environments: wetlands and reservoir tailwaters. Written from an engineering perspective, the book is an ideal introduction to the aquatic and limnological sciences for students of environmental science, as well as students of environmental engineering. It also serves as a reference for engineers and scientists involved in the management, regulation, or restoration of freshwater environments.
