Download or read book Laser Diagnostics and Optical Measurement Techniques in Internal Combustion Engines written by Hua Zhao and published by SAE International. This book was released on 2012-07-30 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing concern about CO2 emissions and energy prices has led to new CO2 emission and fuel economy legislation being introduced in world regions served by the automotive industry. In response, automotive manufacturers and Tier-1 suppliers are developing a new generation of internal combustion (IC) engines with ultra-low emissions and high fuel efficiency. To further this development, a better understanding is needed of the combustion and pollutant formation processes in IC engines. As efficiency and emission abatement processes have reached points of diminishing returns, there is more of a need to make measurements inside the combustion chamber, where the combustion and pollutant formation processes take place. However, there is currently no good overview of how to make these measurements. Based on the author’s previous SAE book, Engine Combustion Instrumentation and Diagnostics, this book focuses on laser-based optical techniques for combustion flows and in-cylinder measurements. Included are new chapters on optical engines and optical equipment, case studies, and an updated description of each technique. The purpose of this book is to provide, in one publication, an introduction to experimental techniques that are best suited for in-cylinder engine combustion measurements. It provides sufficient details for readers to set up and apply these techniques to IC engines and combustion flows.

Download or read book Laser Diagnostics and Optical Measurement Techniques in Internal Combustion Engines written by Hua Zhao and published by SAE International. This book was released on 2012-07-30 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing concern about CO2 emissions and energy prices has led to new CO2 emission and fuel economy legislation being introduced in world regions served by the automotive industry. In response, automotive manufacturers and Tier-1 suppliers are developing a new generation of internal combustion (IC) engines with ultra-low emissions and high fuel efficiency. To further this development, a better understanding is needed of the combustion and pollutant formation processes in IC engines. As efficiency and emission abatement processes have reached points of diminishing returns, there is more of a need to make measurements inside the combustion chamber, where the combustion and pollutant formation processes take place. However, there is currently no good overview of how to make these measurements. Based on the author’s previous SAE book, Engine Combustion Instrumentation and Diagnostics, this book focuses on laser-based optical techniques for combustion flows and in-cylinder measurements. Included are new chapters on optical engines and optical equipment, case studies, and an updated description of each technique. The purpose of this book is to provide, in one publication, an introduction to experimental techniques that are best suited for in-cylinder engine combustion measurements. It provides sufficient details for readers to set up and apply these techniques to IC engines and combustion flows.

Download or read book Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2021-06-14 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph covers different aspects of internal combustion engines including engine performance and emissions and presents various solutions to resolve these issues. The contents provide examples of utilization of methanol as a fuel for CI engines in different modes of transportation, such as railroad, personal vehicles or heavy duty road transportation. The volume provides information about the current methanol utilization and its potential, its effect on the engine in terms of efficiency, combustion, performance, pollutants formation and prediction. The contents are also based on review of technologies present, the status of different combustion and emission control technologies and their suitability for different types of IC engines. Few novel technologies for spark ignition (SI) engines have been also included in this book, which makes this book a complete solution for both kind of engines. This book will be useful for engine researchers, energy experts and students involved in fuels, IC engines, engine instrumentation and environmental research.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1992-05 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book From Molecular Dynamics To Combustion Chemistry Proceedings Of The Conference written by R Naseem and published by World Scientific. This book was released on 1992-10-09 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion science in general and combustion chemistry in particular, have seen a resurgence of interest in recent years due to the importance of energy and pollution problems in modern society. Leading authorities in combustion science and related fields have contributed to this volume which reviews elementary reactions in combustion systems, dynamics of molecules, wave propagation in chemical reactions, chemistry of fuel rich combustion and modelling and simulation of combustion processes involving detailed chemistry and new developments in laser diagnostics.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oxygen Enhanced Combustion Second Edition written by Charles E. Baukal Jr. and published by CRC Press. This book was released on 2013-03-15 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion technology has traditionally been dominated by air/fuel combustion. However, two developments have increased the significance of oxygen-enhanced combustion—new technologies that produce oxygen less expensively and the increased importance of environmental regulations. Advantages of oxygen-enhanced combustion include less pollutant emissions as well as increased energy efficiency and productivity. Oxygen-Enhanced Combustion, Second Edition compiles information about using oxygen to enhance industrial heating and melting processes. It integrates fundamental principles, applications, and equipment design in one volume, making it a unique resource for specialists implementing the use of oxygen in combustion systems. This second edition of the bestselling book has more than doubled in size. Extensively updated and expanded, it covers significant advances in the technology that have occurred since the publication of the first edition. What’s New in This Edition Expanded from 11 chapters to 30, with most of the existing chapters revised A broader view of oxygen-enhanced combustion, with more than 50 contributors from over 20 organizations around the world More coverage of fundamentals, including fluid flow, heat transfer, noise, flame impingement, CFD modeling, soot formation, burner design, and burner testing New chapters on applications such as flameless combustion, steel reheating, iron production, cement production, power generation, fluidized bed combustion, chemicals and petrochemicals, and diesel engines This book offers a unified, up-to-date look at important commercialized uses of oxygen-enhanced combustion in a wide range of industries. It brings together the latest knowledge to assist those researching, engineering, and implementing combustion in power plants, engines, and other applications.

Download or read book Advanced Direct Injection Combustion Engine Technologies and Development written by H Zhao and published by Elsevier. This book was released on 2014-01-23 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct injection enables precise control of the fuel/air mixture so that engines can be tuned for improved power and fuel economy, but ongoing research challenges remain in improving the technology for commercial applications. As fuel prices escalate DI engines are expected to gain in popularity for automotive applications. This important book, in two volumes, reviews the science and technology of different types of DI combustion engines and their fuels. Volume 1 deals with direct injection gasoline and CNG engines, including history and essential principles, approaches to improved fuel economy, design, optimisation, optical techniques and their applications. - Reviews key technologies for enhancing direct injection (DI) gasoline engines - Examines approaches to improved fuel economy and lower emissions - Discusses DI compressed natural gas (CNG) engines and biofuels

Download or read book Department of the Interior and Related Agencies Appropriations for 1998 Justification of the budget estimates United States Forest Service Department of Energy written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1997 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Department of the Interior and Related Agencies Appropriations for 1998 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1997 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Inventory of advanced energy technologies and energy conservation research and development 1976 1978 written by Oak Ridge National Laboratory and published by . This book was released on 1979 with total page 1308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fiscal Year 1986 Department of Energy Authorization basic Research Programs written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Development and Applications and published by . This book was released on 1985 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Instrumentation for Combustion and Flow in Engines written by D.F.G. Durão and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has been said and written about the abilities of modern instrumentation to help solve problems of combustion in engines. In the main, however, the design and fabr ication of combustion chambers continues to be based on extrapolation of exper ience gained from use and rig tests, with little input from advanced techniques such as those based on optical diagnotics. At the same time, it has become increasingly difficult to design better combustion chambers without knowledge of the relevant flow processes. Thus, the future must involve improved understanding which, in turn, will require detailed measurements of velocity, temperature and concentration. The need to narrow the gap between current industrial practice and the acquisition and implementation of improved techniques motivated the organization of the Advanced Study Institute upon which this volume is based. This Institute on Instrumentation for Combustion and Flow in Engines was arranged to display the needs of industry and the possibilities made available by modern instrumentation and, at the same time, to make clear the relative advantages of optical and probe techniques. Held at Vimeiro during the period from 13 to 26 September, 1987, the Institute was attended by 120 participants and 16 invited lecturers.

Download or read book Combustion and flow diagnostics written by SAE. and published by . This book was released on 2006 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Internal Combustion Engine Research written by Dhananjay Kumar Srivastava and published by Springer. This book was released on 2017-11-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses all aspects of advanced engine technologies, and describes the role of alternative fuels and solution-based modeling studies in meeting the increasingly higher standards of the automotive industry. By promoting research into more efficient and environment-friendly combustion technologies, it helps enable researchers to develop higher-power engines with lower fuel consumption, emissions, and noise levels. Over the course of 12 chapters, it covers research in areas such as homogeneous charge compression ignition (HCCI) combustion and control strategies, the use of alternative fuels and additives in combination with new combustion technology and novel approaches to recover the pumping loss in the spark ignition engine. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.

Download or read book Technology and Management Assistance Programs of the Small Business Administration written by United States. Congress. Senate. Select Committee on Small Business and published by . This book was released on 1976 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optical and Laser Diagnostics written by C Arcoumanis and published by CRC Press. This book was released on 2003-06-20 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the automotive industry to blood flow monitoring, optical techniques and laser diagnostics are becoming integral parts in engineering and medical instrumentation. Written by leading global experts from industry, academic groups, and laboratories, this volume provides an international perspective on both existing applications and leading-edge research. With a focus on advanced engineering applications, the book discusses the application of techniques such as laser Doppler velocimetry, particle image velocimetry, and planar laser-induced fluorescence to automotive engines, burners, and gas turbines. It also covers the flow, sprays, and combustion in direct-injection gasoline engines as well as the fundamental structure of flames as revealed by complementary laser techniques. In addition, the book explores laser diagnostic techniques used in the biomedical field and reviews novel research on the use of fiber-optic sensor techniques for structural integrity and physical condition monitoring.