Download or read book Ultrasonics International 91 written by Sam Stuart and published by Elsevier. This book was released on 2013-10-22 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonics International 91 is a documentation of conference proceedings that discusses the status and future of acoustic microscopy and its application to materials research, especially focusing on its quantitative analyses. Acoustic microscopy, using focused waves, has been receiving increased attention as a technology applicable to materials characterization at the microscopic scale. In acoustic microscopy, the excitation and propagation of leaky surface acoustic waves (LSAWs) in the environment of the coupling liquid at the solid specimens are observed. Three types of the systems have been developed: point-focus-beam (PFB), line-focus-beam (LFB), and directional PFB acoustic microscopes. In this paper, a brief history of the practical developments is first presented, followed by LFB acoustic microscopy for quantitative material characterization and some applications concerned with characterization of elastic anisotropy and inhomogeneity of electronic materials, such as LiNb03 and LiTa03 single crystals, and thin-film characterization. This book gives a comprehensive account of the majority of the oral and poster contributions made during the conference, and makes a valuable addition to a student or researchers' ultrasonic literature.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonic And Advanced Methods For Nondestructive Testing And Material Characterization written by Chi Hau Chen and published by World Scientific. This book was released on 2007-05-24 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic methods have been very popular in nondestructive testing and characterization of materials. This book deals with both industrial ultrasound and medical ultrasound. The advantages of ultrasound include flexibility, low cost, in-line operation, and providing data in both signal and image formats for further analysis. The book devotes 11 chapters to ultrasonic methods. However, ultrasonic methods can be much less effective with some applications. So the book also has 14 chapters catering to other or advanced methods for nondestructive testing or material characterization. Topics like structural health monitoring, Terahertz methods, X-ray and thermography methods are presented. Besides different sensors for nondestructive testing, the book places much emphasis on signal/image processing and pattern recognition of the signals acquired.
Download or read book Acoustic Scanning Probe Microscopy written by Francesco Marinello and published by Springer Science & Business Media. This book was released on 2012-10-04 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of atomic force microscopy with ultrasonic methods allows the nearfield detection of acoustic signals. The nondestructive characterization and nanoscale quantitative mapping of surface adhesion and stiffness or friction is possible. The aim of this book is to provide a comprehensive review of different scanning probe acoustic techniques, including AFAM, UAFM, SNFUH, UFM, SMM and torsional tapping modes. Basic theoretical explanations are given to understand not only the probe dynamics but also the dynamics of tip surface contacts. Calibration and enhancement are discussed to better define the performance of the techniques, which are also compared with other classical techniques such as nanoindentation or surface acoustic wave. Different application fields are described, including biological surfaces, polymers and thin films.
Download or read book Ultrasonic Materials Characterization written by Harold Berger and published by . This book was released on 1980 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Technologies in NDT written by Gerhard Busse and published by CRC Press. This book was released on 2008-04-16 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-destructive testing (NDT) is a pertinent task in nearly every field of human activity, from the assuring of aircraft integrity to the evaluation of infrastructural decay caused by deterioration or damage. The development of non-destructive methods for quality management results in economic and environmental benefits, in an increase in product reliability, and in improved public safety and security. This book contains over fifty reviewed and edited papers on the innovative developments and new applications in NDT. It covers cutting-edge NDT methods, including optical, acoustic, ultrasonic, and electromagnetic techniques, tomography, radiography, and thermography. Intended for a researchers and practitioners involved with studying, testing and maintaining machinery, products and components in laboratory and industrial environments.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals and Applications of Ultrasonic Waves written by J. David N. Cheeke and published by CRC Press. This book was released on 2017-12-19 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written at an intermediate level in a way that is easy to understand, Fundamentals and Applications of Ultrasonic Waves, Second Edition provides an up-to-date exposition of ultrasonics and some of its main applications. Designed specifically for newcomers to the field, this fully updated second edition emphasizes underlying physical concepts over mathematics. The first half covers the fundamentals of ultrasonic waves for isotropic media. Starting with bulk liquid and solid media, discussion extends to surface and plate effects, at which point the author introduces new modes such as Rayleigh and Lamb waves. This focus on only isotropic media simplifies the usually complex mathematics involved, enabling a clearer understanding of the underlying physics to avoid the complicated tensorial description characteristic of crystalline media. The second part of the book addresses a broad spectrum of industrial and research applications, including quartz crystal resonators, surface acoustic wave devices, MEMS and microacoustics, and acoustic sensors. It also provides a broad discussion on the use of ultrasonics for non-destructive evaluation. The author concentrates on the developing area of microacoustics, including exciting new work on the use of probe microscopy techniques in nanotechnology. Focusing on the physics of acoustic waves, as well as their propagation, technology, and applications, this book addresses viscoelasticity, as well as new concepts in acoustic microscopy. It updates coverage of ultrasonics in nature and developments in sonoluminescence, and it also compares new technologies, including use of atomic force acoustic microscopy and lasers. Highlighting both direct and indirect applications for readers working in neighboring disciplines, the author presents particularly important sections on the use of microacoustics and acoustic nanoprobes in next-generation devices and instruments.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 2198 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at Bowdoin College, Brunswick, Maine on July 28 to August 2, 1996. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the American Society of Nondestructive Testing, the Ames Laboratory of the USDOE, the Federal Aviation Administration, the National Institute of Standardsand Technology, and the National Science Foundation Industry!University Cooperative Research Centers pro gram. This year's Review of Progress in QNDE was attended by approximately 400 participants from the U.S. and many foreign countries who presented over 350 papers. As usual, the meetingwas divided into 36 sessions, with as many as four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications or inspection systems, and it included many important methods of inspection techniques from acoustics to x-rays. In the last eight to ten years, the Review has stabilized at about its current size, which most participants seem to agree is large enough to permit a full-scale overview of the latest developments, but still small enough to retain the collegial atmosphere which has marked the Review since its inception.
Download or read book Plastics Additives written by Jan C. J. Bart and published by IOS Press. This book was released on 2006 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains an outline of the principles and characteristics of relevant instrumental techniques, provides an overview of various aspects of direct additive analysis by focusing on an array of applications in R ampD, production, quality control, and technical service.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology 1988 Catalog written by Rebecca J. Pardee and published by . This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonic and Advanced Methods for Nondestructive Testing and Material Characterization written by Chi-hau Chen and published by World Scientific. This book was released on 2007 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic methods have been very popular in nondestructive testing and characterization of materials. This book deals with both industrial ultrasound and medical ultrasound. The advantages of ultrasound include flexibility, low cost, in-line operation, and providing data in both signal and image formats for further analysis. The book devotes 11 chapters to ultrasonic methods. However, ultrasonic methods can be much less effective with some applications. So the book also has 14 chapters catering to other or advanced methods for nondestructive testing or material characterization. Topics like structural health monitoring, Terahertz methods, X-ray and thermography methods are presented. Besides different sensors for nondestructive testing, the book places much emphasis on signal/image processing and pattern recognition of the signals acquired.
Download or read book IEEE 1987 Ultrasonics Symposium written by and published by . This book was released on 1986 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantitative Ultrasound written by Thomas Fuerst PhD and published by CRC Press. This book was released on 1999-10-13 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasound is quickly becoming the technique of choice in the measurement of bone density. Proving cheaper and more portable than previous techniques, and also having the advantage of not using ionizing radiation, it is likely that the use of various ultrasound systems will become increasingly widespread in clinical practice. This book is a comprehensive review of the systems currently available, preceded by a summary of the basic science of ultrasound and concluding with a section on clinical studies, trials and experience in a number of countries. Likely future developments are also discussed, bringing the book completely up to date.
Download or read book Imaging in Dermatology written by Michael R. Hamblin and published by Academic Press. This book was released on 2016-07-29 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Imaging in Dermatology covers a large number of topics in dermatological imaging, the use of lasers in dermatology studies, and the implications of using these technologies in research. Written by the experts working in these exciting fields, the book explicitly addresses not only current applications of nanotechnology, but also discusses future trends of these ever-growing and rapidly changing fields, providing clinicians and researchers with a clear understanding of the advantages and challenges of laser and imaging technologies in skin medicine today, along with the cellular and molecular effects of these technologies. - Outlines the fundamentals of imaging and lasers for dermatology in clinical and research settings - Provides knowledge of current and future applications of dermatological imaging and lasers - Coherently structured book written by the experts working in the fields covered
Download or read book Bridging the Centuries with SAMPE s Materials and Processes Technology written by Steve Loud and published by Taylor & Francis. This book was released on 2000 with total page 2381 pages. Available in PDF, EPUB and Kindle. Book excerpt:
