Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Thermodynamics of Solutions written by Eli Ruckenstein and published by Springer Science & Business Media. This book was released on 2009-06-17 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of a number of papers regarding the thermodynamics and structure of multicomponent systems that we have published during the last decade. Even though they involve different topics and different systems, they have something in common which can be considered as the “signature” of the present book. First, these papers are concerned with “difficult” or very nonideal systems, i. e. systems with very strong interactions (e. g. , hyd- gen bonding) between components or systems with large differences in the partial molar v- umes of the components (e. g. , the aqueous solutions of proteins), or systems that are far from “normal” conditions (e. g. , critical or near-critical mixtures). Second, the conventional th- modynamic methods are not sufficient for the accurate treatment of these mixtures. Last but not least, these systems are of interest for the pharmaceutical, biomedical, and related ind- tries. In order to meet the thermodynamic challenges involved in these complex mixtures, we employed a variety of traditional methods but also new methods, such as the fluctuation t- ory of Kirkwood and Buff and ab initio quantum mechanical techniques. The Kirkwood-Buff (KB) theory is a rigorous formalism which is free of any of the - proximations usually used in the thermodynamic treatment of multicomponent systems. This theory appears to be very fruitful when applied to the above mentioned “difficult” systems.
Download or read book Classical and Molecular Thermodynamics of Fluid Systems written by Juan H. Vera and published by CRC Press. This book was released on 2024-11-14 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the connections between different thermodynamic subjects related to fluid systems. In an innovative way, it covers the subject from first principles to the state of the art in fundamental and applied topics. Using simple nomenclature and algebra, it clarifies concepts by returning to the conceptual foundation of thermodynamics. The structural elements of classical and molecular thermodynamics of fluid systems presented cover, via examples and references, both the usefulness and the limitations of thermodynamics for the treatment of practical problems. This new edition explores recent advances in statistical associated fluid theories and contains creative end‐of‐chapter problems connecting the theory with real‐life situations. It includes new chapters on thermodynamics of polymer solutions and molecular thermodynamics and also presents advances in the study of the activity of individual ions. Provides a concise structure of concepts, using simple nomenclature and algebra Clarifies problems usually overlooked by standard texts Features end‐of‐chapter problems to enhance the reader’s understanding of the concepts Includes diverse topics of interest to researchers and advanced students, including elements of statistical thermodynamics, models of solutions, statistical associated fluid theory and the activity of individual ions Offers four appendices giving step‐by‐step procedures and parameters for direct use of the PRSV equation of state and the ASOG‐KT group method for fugacity and activity coefficient calculations Features a complete set of solutions to problems throughout the book, available for download on the book’s webpage under "Support Material" This textbook is written for advanced undergraduate and graduate students studying chemical engineering and chemistry as well as for practicing engineers and researchers.
Download or read book Classical Thermodynamics of Fluid Systems written by Juan H. Vera and published by CRC Press. This book was released on 2016-11-25 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the connections between different thermodynamic subjects related to fluid systems. Emphasis is placed on the clarification of concepts by returning to the conceptual foundation of thermodynamics and special effort is directed to the use of a simple nomenclature and algebra. The book presents the structural elements of classical thermodynamics of fluid systems, covers the treatment of mixtures, and shows via examples and references both the usefulness and the limitations of classical thermodynamics for the treatment of practical problems related to fluid systems. It also includes diverse selected topics of interest to researchers and advanced students and four practical appendices, including an introduction to material balances and step-by-step procedures for using the Virial EOS and the PRSV EOS for fugacities and the ASOG-KT group method for activity coefficients. The Olivera-Fuentes table of PRSV parameters for more than 800 chemical compounds and the Gmehling-Tochigi tables of ASOG interaction parameters for 43 groups are included.
Download or read book Thermodynamics written by Jean Vidal and published by Editions OPHRYS. This book was released on 1980 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simulation and optimization of processes assumes that the thermodynamic properties and phase equilibria of the mixtures concerned are well known. This knowledge is still based upon experimentation, but it is also the result of calculation methods based on the principles of thermodynamics that govern them, insure their coherence, and confer upon them a wide range of application. This text is concerned primarily with the description of these methods and their evolution. It devotes extensive space to fundamental concepts and places particular emphasis on the models that, although based on simplified concepts of the subject matter at the molecular level, have predictive character. Computational examples are used to explain the application of these concepts and models. Contents: 1. Principles. Thermodynamic functions. The ideal gas. 2. Properties of pure substances. 3. Predicting thermodynamic properties of pure substances. General principles. Corresponding states. Group contributions. 4. Equations of state. 5. Characterization of mixtures. 6. Mixtures: liquid-vapor equilibria. 7. Deviations from ideality in the liquid phase. 8. Application of equations of state to mixtures. Calculation of liquid-vapor equilibria under pressure. 9. Liquid-liquid and liquid-liquid-vapor equilibria. 10. Fluid-solid equilibria. Crystallization. Hydrates. 11. Polymer solutions and alloys. 12. Multicomponent mixtures. 13. Chemical reactions. Appendixes. Index. Bibliography.
Download or read book Mass Transfer Operations for the Practicing Engineer written by Louis Theodore and published by John Wiley & Sons. This book was released on 2011-12-06 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: An invaluable guide for problem solving in mass transfer operations This book takes a highly pragmatic approach to providing the principles and applications of mass transfer operations by offering a valuable, easily accessible guide to solving engineering problems. Both traditional and novel mass transfer processes receive treatment. As with all of the books in this series, emphasis is placed on an example-based approach to illustrating key engineering concepts. The book is divided into two major parts. It starts with the principles underlying engineering problems showing readers how to apply general engineering principles to the topic of mass transfer operations. It then goes on to provide step-by-step guidance for traditional mass transfer operations, including distillation, absorption and stripping, and adsorption, plus novel mass transfer processes. Essential topics for professional engineering exams are also covered. Geared towards chemical, environmental, civil, and mechanical engineers working on real-world industrial applications, Mass Transfer Operations for the Practicing Engineer features: Numerous sample problems and solutions with real-world applications Clear, precise explanations on how to carry out the basic calculations associated with mass transfer operations Coverage of topics from the ground up for readers without prior knowledge of the subject Overview of topics relevant to the ABET (Accreditation Board for Engineering and Technology) for those taking the Professional Engineering (PE) exams Appendix containing relevant mass transfer operation charts and tables
Download or read book CJChE written by and published by . This book was released on 1996-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Equations of State written by Kwang-chu Chao and published by . This book was released on 1986 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unit Operations in Environmental Engineering written by Louis Theodore and published by John Wiley & Sons. This book was released on 2017-09-18 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the principles of unit operations as well as the application of these principles to real-world problems. The authors have written a practical introductory text exploring the theory and applications of unit operations for environmental engineers that is a comprehensive update to Linvil Rich's 1961 classic work, "Unit Operations in Sanitary Engineering". The book is designed to serve as a training tool for those individuals pursuing degrees that include courses on unit operations. Although the literature is inundated with publications in this area emphasizing theory and theoretical derivations, the goal of this book is to present the subject from a strictly pragmatic introductory point-of-view, particularly for those individuals involved with environmental engineering. This book is concerned with unit operations, fluid flow, heat transfer, and mass transfer. Unit operations, by definition, are physical processes although there are some that include chemical and biological reactions. The unit operations approach allows both the practicing engineer and student to compartmentalize the various operations that constitute a process, and emphasizes introductory engineering principles so that the reader can then satisfactorily predict the performance of the various unit operations equipment. "This is a definitive work on Unit Operations, one of the most important subjects in environmental engineering today. It is an excellent reference, well written, easily read and comprehensive. I believe the book will serve well those working in engineering disciplines including those beyond just environmental and chemical engineering. Bottom-line: A must for any technical library". —Kenneth J. Skipka, CCM
Download or read book Dynamics and Control of Chemical Reactors Distillation Columns and Batch Processes DYCORD 95 written by J.B. Rawlings and published by Elsevier. This book was released on 2014-05-23 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three important areas of process dynamics and control: chemical reactors, distillation columns and batch processes are the main topics of discussion and evaluation at the IFAC Symposium on Dynamics and Control of Chemical Reactors, Distillation Columns and Batch Processes (DYCORD '95). This valuable publication was produced from the latest in the series, providing a detailed assessment of developments of key technologies within the field of process dynamics and control.
Download or read book CRC Handbook of Solubility Parameters and Other Cohesion Parameters written by Allan F.M. Barton and published by Routledge. This book was released on 2017-10-19 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Solubility Parameters and Other Cohesion Parameters, Second Edition, which includes 17 new sections and 40 new data tables, incorporates information from a vast amount of material published over the last ten years. The volume is based on a bibliography of 2,900 reports, including 1,200 new citations. The detailed, careful construction of the handbook develops the concept of solubility parameters from empirical, thermodynamic, and molecular points of view and demonstrates their application to liquid, gas, solid, and polymer systems.
Download or read book CRC Handbook of Applied Thermodynamics written by David A. Palmer and published by CRC Press. This book was released on 2019-07-23 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook features an overview of the importance of physical properties and thermodynamics; and the use of thermo-dynamics to predict the extent of reaction in proposed new chem-ical combinations. The use of special types of data and pre-diction methods to develop flowsheets for probing projects; and sources of critically evaluated data, dividing the published works into three categories depending on quality are given. Methods of doing one's own critical evaluation of literature, a list of known North American contract experimentalists with the types of data mea-sured by each, methods for measuring equilibrium data, and ther-modynamic concepts to carry out process opti-mization are also featured.
Download or read book Modeling Vapor Liquid Equilibria written by Hasan Orbey and published by Cambridge University Press. This book was released on 1998-05-28 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the latest developments in a subject relevant to professionals involved in the simulation and design of chemical processes - includes disk of computer programs.
Download or read book Fossil Energy Update written by and published by . This book was released on 1983 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vapor Liquid Equilibria Using Unifac written by Aage Fredenslund and published by Elsevier. This book was released on 2012-12-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor-Liquid Equilibria Using UNIFAC: A Group-Contribution Method focuses on the UNIFAC group-contribution method used in predicting quantitative information on the phase equilibria during separation by estimating activity coefficients. Drawing on tested vapor-liquid equilibrium data on which UNIFAC is based, it demonstrates through examples how the method may be used in practical engineering design calculations. Divided into nine chapters, this volume begins with a discussion of vapor and liquid phase nonidealities and how they are calculated in terms of fugacity and activity coefficients, respectively. It then introduces the reader to the UNIFAC method and how it works, the procedure used in establishing the parameters needed for the model, prediction of binary and multicomponent vapor-liquid equilibria for a large number of systems, the potential of UNIFAC for predicting liquid-liquid equilibria, and how UNIFAC can be used to solve practical distillation design problems. This book will benefit process design engineers who want to reliably predict phase equilibria for designing distillation columns and other separation processes.
Download or read book Journal of Chemical Engineering of Japan written by and published by . This book was released on 1988 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes abstracts of Kagaku kōgaku, v. 31-
Download or read book Phase Equilibria in Chemical Engineering written by Stanley M. Walas and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Equilibria in Chemical Engineering is devoted to the thermodynamic basis and practical aspects of the calculation of equilibrium conditions of multiple phases that are pertinent to chemical engineering processes. Efforts have been made throughout the book to provide guidance to adequate theory and practice. The book begins with a long chapter on equations of state, since it is intimately bound up with the development of thermodynamics. Following material on basic thermodynamics and nonidealities in terms of fugacities and activities, individual chapters are devoted to equilibria primarily between pairs of phases. A few topics that do not fit into these categories and for which the state of the art is not yet developed quantitatively have been relegated to a separate chapter. The chapter on chemical equilibria is pertinent since many processes involve simultaneous chemical and phase equilibria. Also included are chapters on the evaluation of enthalpy and entropy changes of nonideal substances and mixtures, and on experimental methods. This book is intended as a reference and self-study as well as a textbook either for full courses in phase equilibria or as a supplement to related courses in the chemical engineering curriculum. Practicing engineers concerned with separation technology and process design also may find the book useful.
