Download or read book Application of the Euler Lagrange Method for solving optimal control problems written by Olaosebikan Temitayo Emmanuel and published by GRIN Verlag. This book was released on 2019-11-13 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2019 in the subject Mathematics - Applied Mathematics, grade: 96.50, , course: Mathematics, language: English, abstract: In this research, Euler-Lagrange Method approach, for solving optimal control problems of both one dimensional and generalized form was considered. In years past, calculus of variation, has been used to solve functional optimization problems. However, with some special features in Calculus of Variation technique, making it unique in solving functional unconstrained optimization problems, these features will be advantageous to solving optimal control problems if it can be amended and modified in one way or the other. This call for the Euler-Lagrange Method which is a modification of the Calculus of Variation Method for solving optimal control problems. It is desired that, with the construction of the new algorithm, it will circumvent the difficulties undergone in constructing control operators which are embedded in Conjugate Gradient Method (CGM) for solving optimal control problems. Its application on some test problems have shown improvement in the results compared with existing results of solving this class of problems. The objective function values for problems 3, 4, 6, 7, 8, 9 and 10 which are: 1.359141, -5.000, 0.36950416, 0.51699120, 0.27576806, 1.5934159×[10]^(-2) and -3.880763×[10]^(-2) appreciate to the existing results 1.359141, -5.000, 0.4146562, 0.613969, 0.2739811, 1.5935×[10]^(-3) and -3.9992×[10]^(-2) respectively while the objective function values for problems 1, 2 and 5 do not fully appreciate to the existing results with slight differences. These results is an indication that the method has some advantages over some existing computational techniques built to take care of the said problems.
Download or read book Optimal Control Theory for Applications written by David G. Hull and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The published material represents the outgrowth of teaching analytical optimization to aerospace engineering graduate students. To make the material available to the widest audience, the prerequisites are limited to calculus and differential equations. It is also a book about the mathematical aspects of optimal control theory. It was developed in an engineering environment from material learned by the author while applying it to the solution of engineering problems. One goal of the book is to help engineering graduate students learn the fundamentals which are needed to apply the methods to engineering problems. The examples are from geometry and elementary dynamical systems so that they can be understood by all engineering students. Another goal of this text is to unify optimization by using the differential of calculus to create the Taylor series expansions needed to derive the optimality conditions of optimal control theory.
Download or read book Applied Optimal Control written by A. E. Bryson and published by Routledge. This book was released on 2018-05-04 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This best-selling text focuses on the analysis and design of complicated dynamics systems. CHOICE called it ""a high-level, concise book that could well be used as a reference by engineers, applied mathematicians, and undergraduates. The format is good, the presentation clear, the diagrams instructive, the examples and problems helpful...References and a multiple-choice examination are included.
Download or read book Optimal Control Systems written by D. Subbaram Naidu and published by CRC Press. This book was released on 2018-10-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of optimal control systems has grown and flourished since the 1960's. Many texts, written on varying levels of sophistication, have been published on the subject. Yet even those purportedly designed for beginners in the field are often riddled with complex theorems, and many treatments fail to include topics that are essential to a thorough grounding in the various aspects of and approaches to optimal control. Optimal Control Systems provides a comprehensive but accessible treatment of the subject with just the right degree of mathematical rigor to be complete but practical. It provides a solid bridge between "traditional" optimization using the calculus of variations and what is called "modern" optimal control. It also treats both continuous-time and discrete-time optimal control systems, giving students a firm grasp on both methods. Among this book's most outstanding features is a summary table that accompanies each topic or problem and includes a statement of the problem with a step-by-step solution. Students will also gain valuable experience in using industry-standard MATLAB and SIMULINK software, including the Control System and Symbolic Math Toolboxes. Diverse applications across fields from power engineering to medicine make a foundation in optimal control systems an essential part of an engineer's background. This clear, streamlined presentation is ideal for a graduate level course on control systems and as a quick reference for working engineers.
Download or read book Constrained Optimization in the Calculus of Variations and Optimal Control Theory written by John Gregory and published by Chapman and Hall/CRC. This book was released on 1992-02-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This applied mathematics textbook includes a somewhat classical introduction to nonlinear programming, the calculus of variations and optimal control theory, along with new theoretical and numerical methods for constrained problems developed by the authors.
Download or read book Optimal Control with Engineering Applications written by Hans P. Geering and published by Springer Science & Business Media. This book was released on 2007-03-23 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a variety of problem statements in classical optimal control, in optimal estimation and filtering, and in optimal control problems with non-scalar-valued performance criteria. Many example problems are solved completely in the body of the text. All chapter-end exercises are sketched in the appendix. The theoretical part of the book is based on the calculus of variations, so the exposition is very transparent and requires little mathematical rigor.
Download or read book A Theory of Optimization and Optimal Control for Nonlinear Evolution and Singular Equations written by Mieczyslaw Altman and published by World Scientific. This book was released on 1990 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research monograph offers a general theory which encompasses almost all known general theories in such a way that many practical applications can be obtained. It will be useful for mathematicians interested in the development of the abstract Control Theory with applications to Nonlinear PDE, as well as physicists, engineers, and economists looking for theoretical guidance in solving their optimal control problems; and graduate-level seminar courses in nonlinear applied functional analysis.
Download or read book Applied and Computational Optimal Control written by Kok Lay Teo and published by Springer Nature. This book was released on 2021-05-24 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to furnish the reader with a rigorous and detailed exposition of the concept of control parametrization and time scaling transformation. It presents computational solution techniques for a special class of constrained optimal control problems as well as applications to some practical examples. The book may be considered an extension of the 1991 monograph A Unified Computational Approach Optimal Control Problems, by K.L. Teo, C.J. Goh, and K.H. Wong. This publication discusses the development of new theory and computational methods for solving various optimal control problems numerically and in a unified fashion. To keep the book accessible and uniform, it includes those results developed by the authors, their students, and their past and present collaborators. A brief review of methods that are not covered in this exposition, is also included. Knowledge gained from this book may inspire advancement of new techniques to solve complex problems that arise in the future. This book is intended as reference for researchers in mathematics, engineering, and other sciences, graduate students and practitioners who apply optimal control methods in their work. It may be appropriate reading material for a graduate level seminar or as a text for a course in optimal control.
Download or read book Introduction To The Calculus of Variations And Its Applications written by Frederic Wan and published by Routledge. This book was released on 2017-10-19 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text provides all information necessary for an introductory course on the calculus of variations and optimal control theory. Following a thorough discussion of the basic problem, including sufficient conditions for optimality, the theory and techniques are extended to problems with a free end point, a free boundary, auxiliary and inequality constraints, leading to a study of optimal control theory.
Download or read book Calculus of Variations and Optimal Control Theory written by Daniel Liberzon and published by Princeton University Press. This book was released on 2012 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a concise yet rigorous introduction to calculus of variations and optimal control theory, and is a self-contained resource for graduate students in engineering, applied mathematics, and related subjects. Designed specifically for a one-semester course, the book begins with calculus of variations, preparing the ground for optimal control. It then gives a complete proof of the maximum principle and covers key topics such as the Hamilton-Jacobi-Bellman theory of dynamic programming and linear-quadratic optimal control. Calculus of Variations and Optimal Control Theory also traces the historical development of the subject and features numerous exercises, notes and references at the end of each chapter, and suggestions for further study. Offers a concise yet rigorous introduction Requires limited background in control theory or advanced mathematics Provides a complete proof of the maximum principle Uses consistent notation in the exposition of classical and modern topics Traces the historical development of the subject Solutions manual (available only to teachers) Leading universities that have adopted this book include: University of Illinois at Urbana-Champaign ECE 553: Optimum Control Systems Georgia Institute of Technology ECE 6553: Optimal Control and Optimization University of Pennsylvania ESE 680: Optimal Control Theory University of Notre Dame EE 60565: Optimal Control
Download or read book Optimal Control and Forecasting of Complex Dynamical Systems written by Ilya Grigorenko and published by World Scientific. This book was released on 2006 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book reviews applications of optimization and optimal control theory to modern problems in physics, nano-science and finance. The theory presented here can be efficiently applied to various problems, such as the determination of the optimal shape of a laser pulse to induce certain excitations in quantum systems, the optimal design of nanostructured materials and devices, or the control of chaotic systems and minimization of the forecast error for a given forecasting model (for example, artificial neural networks). Starting from a brief review of the history of variational calculus, the book discusses optimal control theory and global optimization using modern numerical techniques. Key elements of chaos theory and basics of fractional derivatives, which are useful in control and forecast of complex dynamical systems, are presented. The coverage includes several interdisciplinary problems to demonstrate the efficiency of the presented algorithms, and different methods of forecasting complex dynamics are discussed.
Download or read book Optimal Control Theory written by Zhongjing Ma and published by Springer Nature. This book was released on 2021-01-30 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on how to implement optimal control problems via the variational method. It studies how to implement the extrema of functional by applying the variational method and covers the extrema of functional with different boundary conditions, involving multiple functions and with certain constraints etc. It gives the necessary and sufficient condition for the (continuous-time) optimal control solution via the variational method, solves the optimal control problems with different boundary conditions, analyzes the linear quadratic regulator & tracking problems respectively in detail, and provides the solution of optimal control problems with state constraints by applying the Pontryagin’s minimum principle which is developed based upon the calculus of variations. And the developed results are applied to implement several classes of popular optimal control problems and say minimum-time, minimum-fuel and minimum-energy problems and so on. As another key branch of optimal control methods, it also presents how to solve the optimal control problems via dynamic programming and discusses the relationship between the variational method and dynamic programming for comparison. Concerning the system involving individual agents, it is also worth to study how to implement the decentralized solution for the underlying optimal control problems in the framework of differential games. The equilibrium is implemented by applying both Pontryagin’s minimum principle and dynamic programming. The book also analyzes the discrete-time version for all the above materials as well since the discrete-time optimal control problems are very popular in many fields.
Download or read book The Theory and Application of Linear Optimal Control written by Edmund G. Rynaski and published by . This book was released on 1965 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear optimal control theory has produced an important synthesis technique for the design of linear multivariable systems. In the present study, efficient design procedures, based on the general optimal theory, have been developed. These procedures make use of design techniques which are similar to the conventional methods of control system analysis. Specifically, a scalar expression is developed which relates the closed-loop poles of the multi- controller, multi-output optimal system to the weighting parameters of a quadratic performance index. Methods analogous to the root locus and Bode plot techniques are then developed for the systematic analysis of this expression. Examples using the aircraft longitudinal equations of motion to represent the object to be controlled are presented to illustrate design procedures which can be carried out in either the time or frequency domains. Both the model-in -the- performance-index and model-following concepts are employed in several of the examples to illustrate the model approach to optimal design.
Download or read book An Introduction to Optimal Control written by Yury Shestopalov and published by Cambridge Scholars Publishing. This book was released on 2023-08-09 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the major techniques involved in optimization, control theory, and calculus of variations. The book serves as a concise contemporary guide to optimal control theory, optimization, numerical methods and beyond. As such, it is a valuable source to learn mathematical modeling and the mathematical nature of optimization and optimal control. The presence of a variety of exercises solved down to numerical values is one of the main characteristic features of the book. Another one is its compactness, and the material’s usefulness in preparing and teaching several different university courses. The investigation of trends and their formation undertaken in the book leads seamlessly into extrapolation techniques and rigorous methods of scientific prediction. The research for this book was accomplished at the Russian Technological University (RTU) MIREA, based on the courses which have been taught at the RTU for many years.
Download or read book Optimal Control and the Calculus of Variations written by Enid R. Pinch and published by Oxford University Press. This book was released on 1995 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: A paperback edition of this successful textbook for final year undergraduate mathematicians and control engineering students, this book contains exercises and many worked examples, with complete solutions and hints making it ideal not only as a class textbook but also for individual study. Theintorduction to optimal control begins by considering the problem of minimizing a function of many variables, before moving on to the main subject: the optimal control of systems governed by ordinary differential equations.
Download or read book Interval Analysis written by Navid Razmjooy and published by John Wiley & Sons. This book was released on 2023-12-04 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interval Analysis An innovative and unique application of interval analysis to optimal control problems In Interval Analysis: Application in the Optimal Control Problems, celebrated researcher and engineer Dr. Navid Razmjooy delivers an expert discussion of the uncertainties in the analysis of optimal control problems. In the book, Dr. Razmjooy uses an open-ended approach to solving optimal control problems with indefinite intervals. Utilizing an extended, Runge-Kutta method, the author demonstrates how to accelerate its speed with the piecewise function. You’ll find recursive methods used to achieve more compact answers, as well as how to solve optimal control problems using the interval Chebyshev’s function. The book also contains: A thorough introduction to common errors and mistakes, generating uncertainties in physical models Comprehensive explorations of the literature on the subject, including Hukurara’s derivatives Practical discussions of the interval analysis and its variants, including the classical (Minkowski) methods Complete treatments of existing control methods, including classic, conventional advanced, and robust control. Perfect for master’s and PhD students working on system uncertainties, Interval Analysis: Application in the Optimal Control Problems will also benefit researchers working in laboratories, universities, and research centers.
Download or read book Control Identification and Input Optimization written by Robert Kalaba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a self-contained text devoted to the numerical determination of optimal inputs for system identification. It presents the current state of optimal inputs with extensive background material on optimization and system identification. The field of optimal inputs has been an area of considerable research recently with important advances by R. Mehra, G. c. Goodwin, M. Aoki, and N. E. Nahi, to name just a few eminent in vestigators. The authors' interest in optimal inputs first developed when F. E. Yates, an eminent physiologist, expressed the need for optimal or preferred inputs to estimate physiological parameters. The text assumes no previous knowledge of optimal control theory, numerical methods for solving two-point boundary-value problems, or system identification. As such it should be of interest to students as well as researchers in control engineering, computer science, biomedical en gineering, operations research, and economics. In addition the sections on beam theory should be of special interest to mechanical and civil en gineers and the sections on eigenvalues should be of interest to numerical analysts. The authors have tried to present a balanced viewpoint; however, primary emphasis is on those methods in which they have had first-hand experience. Their work has been influenced by many authors. Special acknowledgment should go to those listed above as well as R. Bellman, A. Miele, G. A. Bekey, and A. P. Sage. The book can be used for a two-semester course in control theory, system identification, and optimal inputs.
