Download or read book Application of Electron Spectroscopy to Surface Chemical Studies written by Mohammed H. Matloob and published by . This book was released on 1978 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential of photoelectron spectroscopy in studying the molecular events at solid surfaces was investigated in the present thesis. In addition to the general introduction the first chapter outlined the basic concepts of photoelectron spectroscopy and its application to surface chemistry. The major parts of the various experiments techniques used were described in chapter 2 together with the way of handling the data (including the method of estimating the coverage) ...........
Download or read book Applied Electron Spectroscopy for Chemical Analysis written by Hassan Windawi and published by John Wiley & Sons. This book was released on 1982 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Electron Spectroscopy for Surface Analysis written by H. Ibach and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of surface physics and surface chemistry as a science is closely related to the technical development of a number of methods involving electrons either as an excitation source or as an emitted particle carrying characteristic information. Many of these various kinds of electron spectroscopies have become commercially available and have made their way into industrial laboratories. Others are still in an early stage, but may become of increasing importance in the future. In this book an assessment of the various merits and possible drawbacks of the most frequently used electron spectroscopies is attempted. Emphasis is put on prac tical examples and experimental design rather than on theoretical considerations. The book addresses itself to the reader who wishes to know which electron spectroscopy or which combination of different electron spectroscopies he may choose for the particular problems under investigation. After a brief introduction the practical design of electron spectrometers and their figures of merit important for the different applications are discussed in Chapter 2. Chapter 3 deals with electron excited electron spectroscopies which are used for the elemental analysis of surfaces. Structure analysis by electron diffrac tion is described in Chapter 4 with special emphasis on the use of electron diffrac tion for the investigation of surface imperfections. For the application of electron diffraction to surface crystallography in general, the reader is referred to Volume 4 of "Topics in Applied Physics".
Download or read book Applications Of X ray Photoelectron Spectroscopy To Catalytic Studies From Routine Analysis To Cutting edge Surface Characterization written by Spyridon Zafeiratos and published by World Scientific. This book was released on 2023-07-04 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray photoelectron spectroscopy (XPS) has become a standard practice technique, and automated XPS facilities can be found in industry and in universities all over the world. This transformed XPS from an advanced characterization method for dedicated research, to a rather standard analysis technique of surface analysis. The catalyst's surface state is probably the most prominent factor that influences the catalytic performance. It is therefore no surprise that XPS has become an indispensable tool in studies of solid catalysts. It has been directly used to investigate issues such as the surface composition of the active catalyst and reaction and deactivation mechanisms.The objective of this book is to provide a comprehensive overview of the current status and future perspectives of X-ray photoelectron spectroscopy dedicated to catalytic applications, including thermal catalysis, electrocatalysis, and photo(electro)catalysis. The book contains 13 chapters, starting with the necessary introduction of the technique background, including basic phenomena and instrumentation aspects. The second part of the book focuses on the presentation of long-established applications of the technique, such as XPS studies of model catalysts. Finally, the book describes relatively recent developments of this method for cutting-edge surface characterization mainly using synchrotron X-ray radiation.
Download or read book Auger and X Ray Photoelectron Spectroscopy in Materials Science written by Siegfried Hofmann and published by Springer Science & Business Media. This book was released on 2012-10-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: To anyone who is interested in surface chemical analysis of materials on the nanometer scale, this book is prepared to give appropriate information. Based on typical application examples in materials science, a concise approach to all aspects of quantitative analysis of surfaces and thin films with AES and XPS is provided. Starting from basic principles which are step by step developed into practically useful equations, extensive guidance is given to graduate students as well as to experienced researchers. Key chapters are those on quantitative surface analysis and on quantitative depth profiling, including recent developments in topics such as surface excitation parameter and backscattering correction factor. Basic relations are derived for emission and excitation angle dependencies in the analysis of bulk material and of fractional nano-layer structures, and for both smooth and rough surfaces. It is shown how to optimize the analytical strategy, signal-to-noise ratio, certainty and detection limit. Worked examples for quantification of alloys and of layer structures in practical cases (e.g. contamination, evaporation, segregation and oxidation) are used to critically review different approaches to quantification with respect to average matrix correction factors and matrix relative sensitivity factors. State-of-the-art issues in quantitative, destructive and non-destructive depth profiling are discussed with emphasis on sputter depth profiling and on angle resolved XPS and AES. Taking into account preferential sputtering and electron backscattering corrections, an introduction to the mixing-roughness-information depth (MRI) model and its extensions is presented.
Download or read book Surface Analysis Methods in Materials Science written by D.J. O'Connor and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book stemmed from a remark by Philip Jennings of Murdoch University in a discussion session following a regular meeting of the Australian Surface Science group. He observed that a text on surface analysis and applica tions to materials suitable for final year undergraduate and postgraduate science students was not currently available. Furthermore, the members of the Australian Surface Science group had the research experience and range of coverage of sur face analytical techniques and applications to provide a text for this purpose. A of techniques and applications to be included was agreed at that meeting. The list intended readership of the book has been broadened since the early discussions, particularly to encompass industrial users, but there has been no significant alter ation in content. The editors, in consultation with the contributors, have agreed that the book should be prepared for four major groups of readers: - senior undergraduate students in chemistry, physics, metallurgy, materials science and materials engineering; - postgraduate students undertaking research that involves the use of analytical techniques; - groups of scientists and engineers attending training courses and workshops on the application of surface analytical techniques in materials science; - industrial scientists and engineers in research and development seeking a description of available surface analytical techniques and guidance on the most appropriate techniques for particular applications. The contributors mostly come from Australia, with the notable exception of Ray Browning from Stanford University.
Download or read book X Ray Photoelectron Spectroscopy of Solid Surfaces written by V.I. Nefedov and published by CRC Press. This book was released on 2023-01-06 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume outlines the physical and methodical concepts of X-ray photoelectron spectroscopy (XPS) specifically for surface studies using both inner and valence electron levels. It discusses the theory and practice of XPS qualitative and quantitative analysis of solid state surfaces and provides lists of extended experimental and theoretical data necessary for the determination of concentration and thin film thicknesses. In addition it covers the many problems concerning in-depth profiling, ion sputtering rate and damages of the structure of altered layers, as well as applications of angular dependence of the intensities and photoelectron diffraction for surface studies. Also provided are the applications of XPS for the investigations of catalysts, adsorption, electronic surface states, oxydation of semi-conductors and alloys, minerals, including lunar regolith and natural gold, glasses, radiation damage, surface diffusion, polymers, etc.
Download or read book Electron and Ion Spectroscopy of Solids written by L. Fiermans and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface physics and chemistry have in recent years become one of the most active fields in solid state research. A number of techniques have been developed, and both the experimental aspect and the correlated theory are evolving at an extremely fast rate. Electron and ion spectroscopy are of major importance in this development. In this volume, which contains edited and extended versions of eight sets of lectures given at the NATO Advanced Study Institute held at Ghent, Belgium, from August 29 to September 9, 1977, a re view of the state of the art in these fields is given from both an experimental and a theoretical point of view. Electron emission techniques such as UPS (ultraviolet photoemission spectroscopy), XPS (x-ray photoemission spectroscopy), and AES (Auger electron spectroscopy) constitute the major part of this volume, reflecting the fact that they continue to be the most widely applied surface techniques. Recent developments in the application of synchrotron radiation to angle-resolved photoelectron spectroscopy are extensively covered, from an experimental point of view by Prof. W. E. Spicer (Stanford University, U.S.A.) and from a theoretical point of view by Dr. A. Liebsch (Kernforschungsanlage Julich, Germany). Emphasis is put on the study of energy bands in layered structures, and on chemisorption on well-defined surfaces. Chemisorption and catalysis on metals is treated in detail by Prof. G. Ertl (Universitat Munchen, Germany). This chapter contains a review of the application of the different surface techniques to specific surface systems.
Download or read book Electron Spectroscopy written by C. R. Brundle and published by Mittal Publications. This book was released on 2002 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photoelectron and Auger Spectroscopy written by Thomas Carlson and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1970 when I first seriously contemplated writing a book on electron spectroscopy, I recognized the impossibility of completely reaching my desired goals. First, the field was expanding (and still is) at such a rate that a definitive statement of the subject is not possible. The act of following the literature comprehensively and summarizing its essential content proved to be a diver gent series. On the other hand, the field has increased to such a size that violent changes in its basic makeup no longer occur with the frequency that was present in its early days. Furthermore, the excitement of electron spectro scopy lies in its many-faceted interrelationships. In the era of specialization, electron spectroscopy is an open-ended subject continually bringing together new aspects of science. I wished to discuss not just one type of electron spectro scopy, but as many as would be possible. The book as it stands concentrates its attention on x-ray photoelectron spectroscopy, but also presents the basis of Auger electron spectroscopy and uv photoelectron spectroscopy, as well as mentioning many of the other branches of the field. A large, many-author volume might be an answer to some of these problems. However, though anyone person possesses only a limited amount of expertise, I have always enjoyed books by a single author since what they lack in detailed knowledge they gain in a unified viewpoint. I hope the final product, though limited in its attainment of these goals, will still be of some merit.
Download or read book Surface Chemical Analysis Auger Electron Spectroscopy and X Ray Photoelectron Spectroscopy Determination of Lateral Resolution written by British Standards Institute Staff and published by . This book was released on 2006-11-30 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface chemistry, Chemical analysis and testing, Surfaces, Spectroscopy, Auger electron spectroscopy, Photoelectron spectroscopy, X-ray photoelectron spectroscopy, Electron emission, Side, Resolution, Dimensional measurement, Straight, Electron physics
Download or read book Auger Electron Spectroscopy written by Donald T. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-11-04 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Surface Analysis by Electron Spectroscopy written by Graham C. Smith and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is t~e fifth in aseries of scientific textbooks designed to cover advances in selected research fields from a basic and general view point. The reader is taken carefully but rapidly through the introductory material in order that t~e significance of recent developments can be understood with only limited initial knowledge. The inclusion in the Appendix of the abstracts of many of the more important papers in the field provides further assistance for the non-specialist, and acts as aspringboard to supplementary reading for those who wish to consult the original liter ature. Surface analysis has been the subject of numerous books and review articles, and the fundamental scientific principles of t~e more popular techniques are now reasonably weIl established. This book is concerned with the very powerful techniques of Auger electron and X-ray photoelectron spectroscopy (AES and XPS), with an emphasis on how they may be performed as part of a modern analytical facility. Since the development of AES and XPS in the late 1960s and early 1970s there have been great strides forward in the sensitivities and resolutions of the instrumentation. Simultaneously, these spectroscopies have undergone a veritable explosion, both in their acceptance alongside more routine ana1ytical techniques and in the range of problems and materials to which they are applied. As a result, many researchers in industry and in academia now come into contact with AES and XPS not as specialists, but as users.
Download or read book Modern ESCAThe Principles and Practice of X Ray Photoelectron Spectroscopy written by Tery L. Barr and published by CRC Press. This book was released on 2020-11-25 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern ESCA: The Principles and Practice of X-Ray Photoelectron Spectroscopy is a unique text/reference that focuses on the branch of electron spectroscopy generally labeled as either Electron Spectroscopy for Chemical Analysis (ESCA) or X-ray Photoelectron Spectroscopy (XPS). The book emphasizes the use of core level and valence band binding energies, their shifts, and line widths. It describes the background, present status, and possible future uses of a number of recently developed branches of ESCA, including:
Download or read book Electron Spectroscopy for Surface Analysis written by H. Ibach and published by Springer. This book was released on 1977-03-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of surface physics and surface chemistry as a science is closely related to the technical development of a number of methods involving electrons either as an excitation source or as an emitted particle carrying characteristic information. Many of these various kinds of electron spectroscopies have become commercially available and have made their way into industrial laboratories. Others are still in an early stage, but may become of increasing importance in the future. In this book an assessment of the various merits and possible drawbacks of the most frequently used electron spectroscopies is attempted. Emphasis is put on prac tical examples and experimental design rather than on theoretical considerations. The book addresses itself to the reader who wishes to know which electron spectroscopy or which combination of different electron spectroscopies he may choose for the particular problems under investigation. After a brief introduction the practical design of electron spectrometers and their figures of merit important for the different applications are discussed in Chapter 2. Chapter 3 deals with electron excited electron spectroscopies which are used for the elemental analysis of surfaces. Structure analysis by electron diffrac tion is described in Chapter 4 with special emphasis on the use of electron diffrac tion for the investigation of surface imperfections. For the application of electron diffraction to surface crystallography in general, the reader is referred to Volume 4 of "Topics in Applied Physics".
Download or read book Practical Surface Analysis Auger and X ray Photoelectron Spectroscopy written by D. Briggs and published by . This book was released on 1990-11-30 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this text is to present the background, the important concepts, and tabulated data of Auger electron spectroscopy (AES) and x-ray photoelectron spectroscopy (XPS) in a practical context for those involved in applied surface analysis techniques.
